Used Bolt Gun for sale (3,604)

Condition: used, functionality: fully functional, 4 used adjustable wheel clamps for recovery crane, etc., fully functional. Pedjx Nqhkepfx Agzsrf No shipping possible. Please do not send email enquiries! If you have any questions, you can reach us by phone. Viewing and collection only by prior telephone appointment. Subject to changes, prior sale, and errors. We are a member of the Federal Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: new, Year of construction: 2023, Specification Psdpfx Ajiyw Tdjgzorf - Brand: Günter Grossmann - Model: GG06LX - Total weight: 2280 kg - Engine: Perkins - Fuel type: Diesel - Number of cylinders: 3 - Rated speed: 3000 (rpm) - Rated power: 18,4 (kW) - Displacement: 1.123 (l) - Radiator: Yes - Engine oil capacity: 4L - Excavator hydraulic pump: Parker USA - Hydraulic pump loader: PWG Italia - Hydraulic oil capacity loader: 84 l - Excavator hydraulic oil capacity: 42 l - Hydraulic tank capacity: 22 (l) WORKING RANGE - Loading bucket capacity: 0.6 (m3) - Loading capacity: 600 kg - loader loading height: 2000 (mm) - loader digging depth: 240 (mm) - Loading bucket lifting time at full load: 8 (s) - Loading bucket lowering time: 4 (s) - Rated capacity of excavator bucket: 0.08 (m3) - excavator max. digging height: 3200 (mm) - excavator unloading height: 1990 (mm) - excavator max. digging depth: 2490 (mm) - Angle of excavator inclination (left/right°) 52/59 - excavator nominal pressure: 20 (MPa) MAIN DIMENSIONS - length: 4900 cm - width: 1150 cm - height: 2350 cm - Wheel specifications: 26×12.00-12 26×12.00-12 - Loading bucket width: 1150 mm - Minimum. Distance: 155 mm - Driving speed: 12 (km/h) - Minimum. Turning radius: 2400 (mm) Exchange parts available in Austria. 12 months warranty.

Condition: new, functionality: fully functional, mileage: 1 km, power: 16.5 kW (22.43 HP), fuel type: diesel, color: yellow, overall weight: 3,300 kg, empty load weight: 3,300 kg, operation weight: 3,400 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: additional headlights, cabin, The GG3500 excavator combines high power, outstanding performance, and reliability. Equipped with the KUBOTA V1505 engine and advanced hydraulics, it is ideal for demanding construction work. Thanks to its compact size and extensive capabilities, it is versatile across various job sites. High Performance and Powerful Engine Powered by the KUBOTA V1505 engine delivering 18.5 kW, four cylinders, and liquid cooling for efficient operation. Fuel consumption ranges from 1.3 to 1.5 L/hour, with a 45 L fuel tank enabling long working periods. Predpfsx H Uxhex Agzof Premium Hydraulic System Fitted with LTM03AX and LKC swing hydraulic motors, providing an oil flow of 99 L/min and a pressure of 20 MPa, ensuring strong digging power and system reliability. The hydraulic oil tank has a 40 L capacity for continuous operation. Excellent Operating Parameters Maximum digging depth of 2827 mm, digging radius of 4831 mm, and digging force of 27 kN. Maximum dumping height is 3181 mm, suitable for loading at greater heights. Compact Dimensions and Stability Dimensions: length 2921 mm, width 1550 mm, height 2485 mm, with a ground clearance of 522 mm. The bucket width is 400 mm and arm length is 1620 mm, ensuring precision and a broad working range. Mobility and Comfort Two travel speeds (0–1.8 km/h and 0–2.8 km/h) provide flexibility on the job site. Ground pressure of 36 kPa allows operation on soft surfaces, with a 360° swing radius for easy maneuverability in confined areas. Machine weight: 3300 kg Engine model: KUBOTA V1505 Number of cylinders: 4 Max. power: 18.5 kW Cooling method: Liquid-cooled Engine oil capacity: 6 L Fuel consumption: 1.3–1.5 L/h Max. engine speed: 2300 rpm Fuel tank capacity: 45 L Hydraulic oil tank capacity: 40 L Hydraulic motor model: LTM03AX Travel drive motor model: LKC Swing hydraulic motor model: LKC Hydraulic oil flow: 99 L/min Nominal pressure: 18 MPa Max. rated pressure: 20 MPa Bucket capacity: 0.08 m³ Travel speed: 0–1.8/0–2.8 km/h Gradeability: 0.3% Ground pressure: 36 kPa Max. digging force: 27 kN Max. digging radius: 4831 mm Max. digging depth: 2827 mm Max. digging height: 4563 mm Max. dumping height: 3181 mm Max. swing angle: 110° Length: 2921 mm Width: 1550 mm Height: 2485 mm Ground clearance: 522 mm Bucket width: 400 mm Blade width: 1550 mm Arm length: 1620 mm Track size: 300x52.5x84

Condition: used, Year of construction: 1999, x-travel 4000 mm Prsdpfxoxzuz Ne Agzef y-travel 1000 mm z-travel 1500 mm Control Heidenhain 355 weight max. 10 t ja more pictures available

Condition: used, Year of construction: 2001, Table surface: 1200×500 mm Table height from floor: 910 mm X-axis longitudinal travel: 1000 mm Y-axis travel: 500 mm Vertical Z-axis travel: 621 mm Rapid traverse of axes (X, Y, Z): 20,000 mm/min Table weight: 1000 kg Taper: ISO-40 Motor power: 11/13 kW Number of tools: 18 Control: Heidenhain 426 Fully utilized CE standard Prodpfx Agjx H Nzdozjf Year: 2002 Dimensions: 2,240 × 2,930 × 2,750 mm Weight: 6,300 kg

Condition: used, Year of construction: 2000, functionality: fully functional, Spindle taper: ISO 40 RPM.: 35-1800 (variable) Travel: X850 Y290 Z475 mm. Table size: 1250 x 280 mm. Podpfsx Ex Sijx Agzjrf Automatic feed: X, Y & Z. Rapid speed: X, Y & Z. Motor: 7,5 HP. Digital readout: Electronica EL403M (X, Y & Z) Year: 2000 Country of origin: Spain. Size (L x W x H): 2050 x 2220 x 2050 mm. Weight: 1900 kg. Variable speed with digital readout in 2 gear ranges, variable feed speed with digital readout. With Hurré milling head and supports. All our machines are tested and serviced before delivery.

Condition: new, Year of construction: 2025, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 32,000 m/min, torque: 108 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece weight (max.): 800 kg, table width: 600 mm, table length: 1,400 mm, table load: 800 kg, rotational speed (max.): 12,000 rpm, overall weight: 9,000 kg, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SPECIAL CLEARANCE SALE AT DISCOUNTED PRICE BRAND NEW MACHINING CENTRE Control and motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Additional equipment: Prepared for 4th axis (rotary table) Full enclosure with side folding inspection windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Predpfx Agsxx S Tdezef This offer applies only to this LAGUN L1200 stock machine (interim sale reserved).

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, overall weight: 200 kg, total width: 800 mm, total length: 1,000 mm, total height: 2,200 mm, volume flow: 2,600 m³/h, suction capacity: 2,600 m³/h, noise level: 79 dB, warranty duration: 12 months, power: 3 kW (4.08 HP), Extractor for double miter saws or saws used in aluminum processing Very powerful and quiet extraction system with noise levels below 80 dB! 2600 m³ per hour suction capacity 3 kW motor Psdpfxswii Hxo Agzorf Extractor includes a 14-meter hose with two outlets

Condition: new, functionality: fully functional, mileage: 1 km, power: 47.81 kW (65.00 HP), fuel type: diesel, color: yellow, empty load weight: 6,530 kg, operation weight: 6,530 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, Year of construction: 2025, Equipment: cabin, crane, Wheeled Excavator G70X Wheeled Excavator The G70X wheeled excavator is a powerful, precise, and highly mobile machine, ideal for all types of construction work. Powered by a Euro 5 Yuchai F3065-S580 engine delivering 48 kW (65 hp), the G70X offers excellent performance, reliability, and low emissions. Advanced hydraulic technology and efficient operational parameters make this excavator indispensable on any professional job site. Engine and Hydraulic Efficiency Equipped with the Euro 5 Yuchai F3065-S580 engine, the G70X delivers 48 kW (65 hp) and complies with stringent Euro 5 emission standards for environmental friendliness. The engine provides a balance between high power and fuel efficiency, enabling prolonged operation without frequent refueling. The hydraulic oil flow rate of 85 L/min and a main relief valve pressure of 24.5 MPa ensure powerful work performance for rapid, precise movements and high digging force. Excellent Work Parameters The G70X offers a wide operational range, with a maximum digging reach of 6,535 mm, minimizing the need for frequent repositioning. It achieves a maximum digging depth of 3,530 mm, digging height of 6,715 mm, and dumping height of 4,905 mm, making it suitable for deep excavation and efficient material handling at height. Speed and Maneuverability Engineered for high mobility, the G70X attains a maximum travel speed of 30 km/h for rapid transit on the job site. The platform rotation speed is 8.5 rpm, enabling precise control in confined spaces. With a minimum front turning radius of 2,275 mm and a rear turning radius of 1,665 mm, the excavator offers excellent maneuverability, ideal for work in narrow or challenging terrains. Technical Data Weight: 6,530 kg Engine: Euro 5 Yuchai F3065-S580 Engine power: 48 kW (65 hp) Oil flow rate: 85 L/min Main relief valve pressure: 24.5 MPa Maximum digging force: 35 kN Maximum travel speed: 30 km/h Platform rotation speed: 8.5 rpm Fuel tank capacity: 135 L Hydraulic oil tank capacity: 120 L Prsdpfx Asxr Rwhjgzef Maximum digging reach: 6,535 mm Maximum digging depth: 3,530 mm Maximum digging height: 6,715 mm Maximum dumping height: 4,905 mm Minimum front turning radius: 2,275 mm Minimum rear turning radius: 1,665 mm Overall length: 5,950 mm Overall width: 2,010 mm Overall height: 2,800 mm Wheelbase: 2,410 mm Tire size: 195/85-20 Ground clearance: 430 mm Blade width: 1,980 mm Blade height: 390 mm Bucket width: 700 mm Boom length: 3,400 mm

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms mobile on rollers Predpfxsivta Nj Agzof 2 pieces available Very good condition ready for use!!!

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Prsdpfx Asxx Tmrjgzef Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg Prjdpfjxx Uayjx Agzjf MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h EQUIPMENT 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Year of construction: 2015, condition: used, Evaporator Guntner Prsdpfjx Iughsx Agzsf -Type: S-GHN 080.2H/212-END50.E -Cooling capacity: 61.5 kW at DT8, 49.3 kW at DT7 -Fin spinning: 12 mm -Fans: 2 x 800 mm -Dimensions: 3970 x 1120 x 1400 mm -Electric defrost -Refrigerant: Freon -Year of production: 2015 -Volume: 115 L -Weight: 518 kg -Quantity in stock: 1 -Reference number: CH 588 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Year of construction: 2017, condition: repair required (used), functionality: unexamined, machine/vehicle number: 42004818, used truck washing brush for sale Pedpox Hfckefx Agzorf

Condition: new, functionality: fully functional, power: 80.9 kW (109.99 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,000 kg, empty load weight: 8,000 kg, operation weight: 8,000 kg, maximum load weight: 2,500 kg, lifting power: 2,500 kg/m, lifting height: 2,800 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Excavator Loader GG30BC Excavator Loader The GG30BC excavator loader is a robust and reliable machine designed for construction and industrial applications. With a loading capacity of 2,500 kg and an operating weight of 8,000 kg, this machine delivers outstanding stability and efficiency. The loader bucket, with a width of 2,200 mm and a capacity of 1.3 m³, ensures fast and effective loading. Engine and Drive System The machine is equipped with a modern YUCHAI YCF36110-S500 engine (81 kW). The mechanical transmission with fixed drive axle features 2 forward and 2 reverse gears, providing optimal control of the vehicle. The maximum travel speed is 24 km/h, enabling efficient transportation around the jobsite. Hydraulics and Brake System The advanced hydraulic system operates at a pressure of 22 MPa and delivers a digging force of 46.5 kN for the grab and 31 kN for the bucket. The standard digging depth is 4,000 mm, extendable to 5,500 mm with an optional telescopic arm. The machine is fitted with a pneumatic-hydraulic braking system including an emergency stop function, significantly enhancing operational safety. Working Range and Dimensions The GG30BC provides a dump height of 2,800 mm, a reach of 1,062 mm, and a swing angle of 190°. The maximum tractive force is 39 kN, and the breakout force is 38 kN. A minimum ground clearance of 300 mm ensures excellent performance on challenging terrain. The machine dimensions are 7,600 × 2,260 × 2,890 mm, with a turning radius of 6,581 mm at a steering angle of ±36°. Engine model: Euro 5 YUCHAI ENGINE-YCF36110-S500 Rated power: 81 kW (110 hp) Operating weight: 8,000 kg Prjdpfjxr Ru Hjx Agzjf Loading capacity: 2,500 kg Transmission type: Mechanical transmission with fixed power drive Gears: 2 forward / 2 reverse Maximum speed: 24 km/h Tyres: (F) 14-17.5 (R) 19.5L-24 Steering brand: FEICHENG YUNYU Steering system working pressure: 12 Pa Front tyre pressure: 0.22 MPa Main transmission type: Reduction Final drive: Single-stage final reducer Brake system control: Pneumatic brake clamp over oil, external, self-regulating, self-balancing Hydraulic system pressure: 22 MPa Digging force (grab): 46.5 kN Digging force (bucket): 31 kN Brake type: Self-levelling Emergency brake control: Manual – parking brake with end force Bucket capacity: 1.3 m³ Bucket width: 2,200 mm Dipper bucket capacity: 620 mm Loader dump height: 2,800 mm Loader dump reach: 1,062 mm Maximum digging depth: 4,000 mm Optional digging depth: 5,000–5,500 mm (with telescopic arm) Minimum turning radius: 6,581 mm Digging arm swing angle: 190° Maximum tractive force: 39 kN Breakout force: 38 kN Minimum ground clearance: 300 mm Wheelbase: 2,250 mm Steering angle: ±36° Working pressure: 12 MPa Length: 7,600 mm Width: 2,260 mm Height: 2,890 mm

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Pjdpsiyyxcjfx Agzjrf Very good condition, directly from production!!!

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 Prjdpfx Agsxx Ti Tszef DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002)

Condition: new, functionality: fully functional, fuel type: diesel, color: yellow, overall weight: 5,250 kg, empty load weight: 5,250 kg, operation weight: 5,250 kg, maximum load weight: 2,000 kg, lifting power: 2 kg/m, lifting height: 4,500 mm, tire size: 16 / 70-20, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.8 m³, Year of construction: 2024, load capacity: 2,000 kg, Equipment: additional headlights, cabin, hydraulics, GUNTER GROSSMANN GG TELE 2000 New high quality telescopic loader Description Loading weight: 2000 kg Bucket capacity: 0.8 Min. Turning radius: 4600 mm Lifting height: 4500 mm Lifting speed: ≤5.0 s Driving mode: full hydraulic drive on four wheels; Transmission gearbox: hydraulic variable with 2 speeds Total weight: 5250 kg Dimension (L * W * H): 5800 * 2000 * 2750 mm Quick change :yes Includes: Hydraulic Joystick + Quick Coupling + Bucket SPECIFICATIONS Engine: Luotuo Cab: Luxury Adjustable steering wheel: yes Pedpfx Aou Dcgmegzjrf Tire size: 16 / 70-20 Timer: Yes Work lights: Yes -LED Reverse camera: Yes Total weight of the machine: 5250 kg Loading weight: 2000kg MAIN DIMENSIONS Dimension (L * W * H) 5800 * 2000 * 2750 mm OPERATING RANGE The height of: 4,5m Rated: speeds 2400 obr./min Maximum: Bucket pull-out force, lifting cylinder 60KN Drive: Four-wheel drive Maximum speed: 22 km / h Braking mode hydraulic: four-wheel disc brake Lifetime: ≤5.0 s

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg Prsdpfx Ajiit Eregzef SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: new, functionality: fully functional, Year of construction: 1925, operating hours: 1 h, load capacity: 1,200 kg, lifting height: 5,280 mm, free lift: 1,995 mm, fuel type: diesel, power: 18.4 kW (25.02 HP), motor manufacturer: Perkins 403J-11T, turning radius (outer): 1 mm, tire condition: 100 %, overall weight: 2,900 kg, empty load weight: 2,900 kg, total width: 1,560 mm, color: yellow, Equipment: cabin, GG613 Telehandlers The GG613 is a modern, compact telescopic loader that excels in demanding tasks across construction, agriculture, and industry. It delivers high power, precise control, and reliability, ensuring maximum performance in all conditions. Perkins 403J-11T Engine – Power and Efficiency Powered by a three-cylinder, turbocharged Perkins 403J-11T engine with a displacement of 1.1L (18.4 kW at 2800 rpm), this engine meets emission standards and delivers optimal torque with minimal fuel consumption. Hydrostatic Drive and PWG Hydraulics The hydrostatic drive system combined with the PWG hydraulic pump offers a flow rate of 28.6 l/min (optional 41.6–70 l/min) at a pressure of 225 bar, providing smooth and precise control for efficient management of attachments. Lifting Height and Operating Capacity The GG613 telehandler provides a maximum lifting height of 5280 mm with a standard bucket and 4981 mm with pallet forks, making it an ideal solution for loading and transporting materials without the need for additional equipment. Stability and Operator Comfort Thanks to its low center of gravity and wide wheelbase, the machine offers excellent stability and safety. The operator’s cab is ergonomically designed, delivers outstanding visibility, and features hydrostatic power steering for precise maneuvering on challenging terrain. Prjdpoxr Rwbjfx Agzof Efficiency and Economy Equipped with a 33L fuel tank and a 36L hydraulic oil tank, the machine supports long periods of operation without frequent refueling. The 0.5 m³ bucket capacity and a maximum lifting capacity of 1200 kg ensure high productivity and operational efficiency. Compact Dimensions and Maneuverability Maximum load: 1200 kg Operating weight: 2900 kg Engine: Perkins 403J-11T Number of cylinders: 3 Engine type: Water-cooled, turbocharged, four-stroke Rated power / speed: 18.4 kW / 2800 rpm Displacement: 1.1 l Drive type: Hydrostatic axle drive Axle: Planetary drive on steering axle Hydraulic system: PWG Pump type: Gear pump Flow rate: 28.6 l/min (optional 41.6–70 l/min) Pump pressure: 225 bar Fuel tank capacity: 33 l Hydraulic oil tank capacity: 36 l Bucket volume: 0.5 m³ Total attachment tilt angle: 148° First gear – speed: 0–8 km/h Second gear – speed: 0–20 km/h Tyres: 10.0/75 - 15.3 Overall length (with standard bucket): 3944 mm Overall length (with pallet forks): 4081 mm Overall length (without standard bucket): 2977 mm Hinge point bucket to axle center: 450 mm Wheelbase: 1922 mm Rear overhang: 427 mm Cabin height: 1995 mm Maximum working height (with standard bucket): 5280 mm Maximum working height (with pallet forks): 4981 mm Maximum boom pivot height: 4537 mm Load height with extended boom: 4163 mm Load height with retracted boom: 2949 mm Load height (with pallet forks): 4301/3087 mm Tipping height with extended boom: 3566 mm Tipping height with retracted boom: 2352 mm Working distance: 476 mm Maximum reach at load height: 2289/932 mm

Condition: new, fuel type: diesel, overall weight: 1,600 kg, empty load weight: 1,600 kg, Year of construction: 2024, GÜNTER GROSSMANN GG1600 MINI GRAAFMACHINE 3 cylinder KUBOTA Günter Grossmann GG1600 kubota Thanks to a close cooperation between Günter Grossmann and Kubota, the new GG1600 excavator was created. Günter Grossmann GG1600 crawler excavator. Mini crawler excavator GG1600, KUBOTA engine, KDK hydraulic pump, VS EATON compressor motor. Very good quality. Standard equipment Excavator bucket 400mm Additional accessories for the machine can be purchased. Model GG1600 is a great machine for the most demanding construction, electric and hydraulic companies. We guarantee service after warranty. The excavator is manufactured on the basis of solid European technology SPECIFICATIONS Model: GG1600Y Brand: Günter Grossmann Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Engine power: 15 kw/2300r/min Main pump: Japan - KDK Japan Swing motor: American - EATON USA Driving motor: Korea - KOREA DONGHYUN OPERATING RANGE Max digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Rotation radius: 360 optional extra ACCESSORIES Prsdpfoggai Usx Agzef Auger Grapple Digging tine Rake Narrow bucket 200 mm Narrow Bucket 380mm Leveling bucket 500mm Leveling bucket 800mm Quick coupling Breaker GG1600 13,400 euro ex vat GG800 Bn83wivh 5900.00 euro incl vat 7139.00 euro incl vat GG1000 9909.00 euro incl vat 8190.00 euro ex vat transport costs on request We deliver to companies and individuals in the Netherlands and Belgium! With every delivery you will receive a VAT invoice and (factory) warranty. -Click on 'e-mail this advertiser' and state your contact details and we will send you the webshop details. -telephone (7 days a week from 8.00 to 23.00) -Pick up is possible by appointment, also in the evenings and weekends. Easy payment ... -through our webshop -Cash or debit card at pickup/delivery -Via iDeal. (request a link through the mail) for the GG 800 data look at our other ad more info please call or mail us Lease negotiable

Condition: new, functionality: fully functional, power: 11.03 kW (15.00 HP), fuel type: diesel, color: yellow, overall weight: 1,020 kg, empty load weight: 1,020 kg, operation weight: 1,020 kg, lifting height: 2,610 mm, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, emission class: euro5, Year of construction: 2025, Gunter Grossmann & Kubota Japan 1000 Y The latest model and highest quality of JAPAN 1000. Japan 1000 is a high-quality machine for demanding construction, electrical and plumbing companies. 1. Japanese KUBOTA 15 HP engine Pjdjvuk Uvepfx Agzsrf 2. American EATON drive motors 3. The American EATON rotary engine 4. Two speeds 5. Adjustable crawler chassis 6. Articulated boom pro 7. Hidden travel motors 8. Hidden hydraulic hoses 9. Modern style construction 10. The machine meets the latest EURO 5 standard 11. Parker hydraulic pump 12. Hydraulic oil cooler integrated with Kubota engine 13. Sturdy crawler tracks for a pleasant ride .. 14 servo joystick control 15.2 travel speeds We have all spare parts for machines of our brand available throughout Europe SPECIFICATIONS Model: Japan 1000 Y Brand: Gunter Grossmann Operating weight: 1020 kg Bucket capacity: 0.025 cbm Bucket width: 340 mm, Engine: Japan - KUBOTA Rated power: 11.8 kw/2300r/min Main pump: Parkier Swing motor: Eaton Travel motor: Eaton Travel speed: 3 km/h Digging arm: Movable sideways Travel speed: Two speeds Drive motors: Hidden Style hoses: Hidden DIMENSIONS Overall dimensions (LxWxH) 2770x896x1490 mm Wheelbase 770 mm Total track length 960 mm WORKING RANGE Max. digging depth: 1650 mm Max. digging height: 2610 mm Max. digging radius on the ground: 2890 mm Turning radius: 360° Max. upgrade height of bulldozer blade: 345 mm Max. digging depth bulldozer blade: 255 mm

Condition: new, functionality: fully functional, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 3,500 mm, fuel type: diesel, battery voltage: 12 V, fork length: 1,220 mm, total height: 2,580 mm, total length: 4,320 mm, total width: 1,600 mm, Equipment: chassis, Rough terrain 4×4 forklift with Yanmar engine.3.5T Gunter Grossmann 3.5 ton diesel forklift for rough terrain, 4x4, Description Payload 3500kg Japanese engine Yanmar 4TNE98 (EUIII), with automatic transmission, with 100% limited slip differential, with engine start safety system, with Toyota seat and seat belt, LED lighting, buzzer, horn, flashing light, with industrial pneumatic tires, with 1220 mm fork length, with 3500 mm duplex mast, with shift function. With toolkit and manuals. Price list and delivery time: Includes: Forklift + adjustable forks. Pedpfou Dch Dex Agzorf SPECIFICATIONS Model: Gunter Grossmann 3.5T 4x4 offroad Lifting capacity: 3500 kg Lifting height: 3.5m Mast: Duplex Tire type: Pneumatic Brake: hydraulic pedal Engine: Japanese Yanmar 4TNE98 MAIN DIMENSIONS Length without forks: 3100mm Width: 1600mm, Height: 2580mm All-terrain 3.5T 4x4 all-terrain forklift with Yanmar engine. RANGE Lifting height: 3.5m Capacity: 3500 kg

Condition: new, color: yellow, overall weight: 2,000 kg, empty load weight: 2,000 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, GG2000 CAB Gunter Grossmann & Yanmar Günter Grossmann GG2000 CAB crawler excavator. Mini crawler excavator GG2000 CAB, Japan KUBOTA engine, KDK hydraulic pump, USA EATON compressor engine. Very good quality . (Excl. VAT) Includes: Excavator GG 2000 CAB + Narrow bucket 400mm + Narrow bucket 400mm+ Leveling bucket 1000mm + . Predpfx Ageqv E S Rjzsf PECIFICATIONS Model: GG2000 CAB Bucket capacity: 0.045 m³/200kg Bucket width: 250 mm, 400 mm, 600 mm, 1000 mm Engine: Japanese Yanmar Rated power: 27KM Capacity: 1.53L Engine: three-cylinder, water-cooled Main pump: Teife Valve: Teife Swing motor: USA Eaton Travelling motor: USA Eaton Max. Digging depth: 2150 mm Max. Vertical digging depth: 1740 mm Max. Digging height: 3275 mm Total dimension (LxWxH): 3800 x 1050 x 2170 mm Overall length of track: 1620 mm Ground clearance upper chassis: 460 mm Turning radius: 360 DIMENSIONS Overall dimensions (LxWxH): 3800 x 1050 x 2170 mm Overall length of track: 1620 mm Ground clearance upper chassis: 460 mm Turning radius: 360 WORKING RANGE Max. Digging depth: 2150 mm Max. Vertical digging depth: 1740 mm Max. Digging height: 3275 mm

Condition: new, Year of construction: 2024, GG1700 3 cilinder kubota . Professional new excavator model: GG1700 from the international brand Günter Grossmann. Every Günter Grossmann machine comes with a company warranty. The GG1700 model is a great piece of equipment for the most demanding construction, electrical and plumbing companies. We guarantee service after the equipment warranty. Excavators are manufactured on the basis of advanced technology. We have all parts for our brand machines in stock in Europe Price EUR 16600 (excl. VAT) (Including: Excavator GG1700 + bucket 400 mm) SPECIFICATIONS Model: GG1700 Brand: Günter Grossmann Weight: 1700kg Joystick: Yes Extendable Tracks: Yes Pjdpfx Agshlv N Iozjrf Movable swivel arm: Yes Engine brand: KUBOTA D902 Power: 25 HP Pump: TF PSA12NOO Distributor: TF TKM15BX-08LP 01 Rotary Motor: Eaton VS Drive Motor: Eaton USA Driving speed: 0-8.5 km/h MEASUREMENTS Total length:: 3585 mm Total width: 1300 mm Total height: 2362 mm Minimum ground clearance: 1605 mm WORKING RANGE max. digging depth: 2300 mm Maximum digging radius: 4050 mm Maximum dump height: 2550 mm ACCESSORIES Bucket 300mm: 260 Eur ex Bucket 400mm: 300 Eur ex Bucket 600mm: 330 Eur ex Bucket 1000mm: 400 Eur ex Log grab: 600 Eur ex Ripper: 320 Eur ex Rake: 320 Eur ex Drill: 1800 Eur ex Quick coupler: 450 Eur ex Demolition Hammer: 1800 Eur ex