Used Bone Bandsaw for sale (586)

Year of construction: 2009, condition: ready for operation (used), Throughput: approx. 150 jars/min, foreign body detection capability for glass fragments: from approx. 3 x 3 x 3mm, metal: from approx. 1 x 1 x 1mm, stones and bones: from approx. 3 x 3 x 3mm, suitable for glass containers, tinplate cans, beverage cartons (carton bricks), and plastic containers, typical false rejection rate per 10,000 inspected products: approx. 7, maximum container diameter: 155mm, maximum inspection speed: 100m/min, standard sensor speed: 45m/min, sensor height: 256 to 410mm, pixel size: 0.4 x 0.4 to 0.8 x 0.8mm, rejection system: electropneumatic cylinder, operator interface: 17 inch touchscreen, remote access: Ethernet or modem, frame material: AISI 304 stainless steel, sensor protection class: IP55, power supply: 3 phase + protective earth (3PH + GND), operating voltage: 400V, machine power consumption (2 motors): 3kW, processing unit power consumption: 500W, high voltage generator: 0.3 to 1kW, electrical cabinet protection class: IP55, X-ray radiation: 0.1µSv/h, compressed air operating pressure: 4 to 6bar, air consumption: 50Nl/min, infeed and outfeed height: 1305mm, screen and operating height: 1070mm, length: 2890mm, width: 1000mm, height: 2525mm, weight: 1.3t. Equipped with a reject system for contaminated containers and a conveyor belt. The machine was in operation until 2024. Inspection on site is possible. Dsdpfszhw S Rsx Ak Aokw

Year of construction: 1997, condition: ready for operation (used), A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible. Djdpfxozka Iys Ak Ajkw

Condition: new, Year of construction: 2025, machine/vehicle number: 4431321026, functionality: fully functional, operating hours: 2 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 440 mm, cutting width (max.): 600 mm, control type: PLC-controlled, roller diameter: 440 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 15 rpm, rotational speed (min.): 150 rpm, total height: 2,225 mm, total length: 4,341 mm, total width: 1,756 mm, overall weight: 2,080 kg, table height: 810 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, DEMO MACHINE DIRECTLY FROM THE MANUFACTURER – AVAILABLE IMMEDIATELY! We are selling a semi-automatic two-column bandsaw PEGAS-GONDA 440 HORIZONT SHI, manufactured in January 2025, directly from our showroom. Only 2 operating hours! The machine was used exclusively for demonstration purposes and was never used in production. Sale due to replacement with a new showroom machine. SPECIAL PRICE – 39.4% SAVING! - New price: EUR 49,157 - Offer price: EUR 29,800 plus VAT - You save EUR 19,357! TECHNICAL DATA - Year of manufacture: 01/2025 - Operating hours: 2 h - Semi-automatic two-column bandsaw - Double-sided miter cuts: ±60° - Round cut at 90°: 440 mm - Rectangular cut at 90°: 610 × 385 mm - Saw blade: 6060 × 34 × 1.1 mm - Blade speed: 15–150 m/min - Main motor: 4.0 kW - Weight: approx. 2,080 kg - MITSUBISHI PLC control with touchscreen - Automatic angle adjustment (RTO) - Hydraulic material and saw blade tension 6 MONTHS MANUFACTURER'S WARRANTY We provide a 6-month warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer only bears the travel and transportation costs of the technician. Service rates: - Travel costs: EUR 1/km (round trip) - Travel time: EUR 25/hour - Technician labor: EUR 50/hour (outside the warranty) DELIVERY AND COMMISSIONING Price: EUR 29,800 net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Dedpo Aa Dfxsfx Ak Aekw Machine available immediately! We would be happy to offer transport to the customer, professional commissioning, and operator training at an additional cost, according to our standard service rates. ORIGINAL ACCESSORIES A wide range of PEGAS-GONDA accessories is available (see attached price list). We particularly recommend our original roller conveyors for efficient material handling. We will gladly prepare an offer for a complete sawing station. YOUR ADVANTAGES: - Only 2 operating hours, never used in production - Directly from the manufacturer - 39.4% cheaper than a new machine - 6 months warranty - Original manufacturer's service - Available immediately Contact us for more information or to arrange a viewing! PEGAS-GONDA – directly from the manufacturer.

Condition: new, functionality: fully functional, Offered for sale is a semi-moist pet treat production equipment set based on a twin-screw extruder, designed for continuous forming, portioning, and cooling of semi-moist products. The line has been dismantled and is ready for shipment. It was purchased from a supplier and not used in production, but the configuration is equivalent to machinery currently operating in active plants for semi-moist pet treat manufacturing. This system addresses the key process steps that define semi-moist product quality and handling: stable solids dosing into the extruder, controlled shaping and cutting, as well as staged cooling to stabilize texture and reduce sticking or deformation before packaging or further processing. The extruder is of twin-screw design and has achieved production capacities of up to 150 kg/h, depending on recipe and configuration. Product shaping is highly flexible and can be adapted to a variety of product formats; it is suitable for dental sticks, hearts, bones, sticks, strips, and other geometries depending on the die/forming set and cutter configuration. The configuration line has been used for high meat meal or grain-free semi-moist treats as well as vegetarian-type items; final product characteristics depend on recipe, moisture targets, and process parameters. Dry base components are supplied using a volumetric or mass-based dosing feeder, feeding directly into the extruder. This enables steady extrusion and consistent shaping. Downstream portioning is performed with a rotary knife cutter fitted with specialized inserts for clean cutting of semi-moist products. Cut length can start from approx. 5 mm and can be adjusted as required; achievable range depends on settings and the cutter head. The cutter head concept is flexible and can be adapted or redesigned depending on desired final product and surface finish for different shapes and recipes. Dkodpfx Akjycfw Ej Aow After forming and cutting, product is conveyed through an initial cooling section with a fan, followed by a conveyor cooler for further stabilization. Cooling is based on ambient forced air, with cooling performance managed by conveyor speed (residence time) and airflow. This two-stage cooling process is optimal for semi-moist products, helping to prevent clumping, deformation, or marking during handling and transport. A notable feature of this line is the mixing head at the extruder outlet, which supports improved mixing and temperature control and enables production of two-color treats (application dependent). The sale also includes the liquid handling package used in semi-moist processing—stainless steel pumps and tanks for water, fats/oils, glycerol, and other typical process fluids. All liquid handling components are stainless steel, meeting hygienic production standards.

Condition: ready for operation (used), Year of construction: 2012, BANDSAW TEBA 310 -CE marking -Year of manufacture 2012 -Maximum cutting capacity 310 mm -Conventional / Semi-automatic -Miter cutting device -Coolant system -Cutting speed / Infinitely adjustable -Total power 3 kW -Saw blade dimensions 3990x27x0.9 mm -Approx. 20 spare saw blades Dkjdpfx Akez Di Slo Ajw Dimensions: L x W x H 1.7 x 1.2 x 1.9 meters / Weight approx. 1100 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2017, operating hours: 748 h, functionality: fully functional, machine/vehicle number: 5231847, type of input current: three-phase, total width: 3,988 mm, total length: 4,740 mm, total height: 3,440 mm, input voltage: 400 V, compressed air connection: 6 bar, overall weight: 2,700 kg, Sheet thermoforming machine Machine for processing semi-finished products Maximum sheet size: 1,000 x 700 mm Minimum sheet size: 300 x 210 mm Maximum sheet thickness: 12 mm Minimum sheet thickness: 0.5 mm The machine is fully equipped and prepared for automatic feeding. Features upper and lower tool function, water-cooled molds. Intelligent control via pre-saved material parameters. Dkodpfx Akjznbp Tj Asw The price includes a GEISS horizontal bandsaw HBS 1000.

Condition: excellent (used), Year of construction: 2001, For sale is a used CENTAURO bandsaw 600 with a cutting width of 580 mm. The saw is in very good condition and has been serviced and inspected by our specialist staff. (Fully operational) Technical specifications: - Wheel diameter: 600 mm - Cutting height: 350 mm - Cutting width: 580 mm - Tilting table - Bandsaw blade length: 4480-4580 mm - 3 HP (2.2 kW) motor, 400 Volt The bandsaw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Dkjdpfx Aksy Ex Sco Ajw Reference: R-R001W

Condition: excellent (used), Year of construction: 2000, Lima RM 700 DSP Separator The DSP Deboner is specially developed to separate meat from hard bones as for instance from pork bones to obtain high quality structured meat at optimal yield and low calcium content. This advanced machine is designed for the food processing industry, ensuring efficient separation of meat from bones with maximum productivity. Manufacturer: Lima Model: RM 700 DSP Year: 2000 Dedpfxjy D Nl Rj Ak Aekw Capacity: Up to 4.000 kg/h Power supply: 400V / 50Hz / 3Ph Machine dimensions LxWxH: 2.400x950x1.800 mm Machine weight: 1.400 kg.

Condition: new, Year of construction: 2026, The professional CORMAK BS912N metal bandsaw is a robust and precise machine designed for cutting tubes, profiles and solid elements. The model allows cutting materials with a diameter of up to 230mm and operation at angles from 0° to 45°. Automatic downfeed of the saw arm, lowering adjustment by means of a hydraulic cylinder, a cooling system and a stable cast iron construction make this machine ideal for metalworking shops, production workshops and craft workshops. CORMAK BS912N metal bandsaw – precise angled metal cutting The CORMAK BS912N metal bandsaw is a professional machine designed for precise cutting of tubes, profiles and solid elements. Its solid construction, automatic tool downfeed and hydraulic adjustment of the saw arm lowering ensure convenient operation, repeatability and high cutting quality. The BS912N model allows cutting of materials with a diameter of up to 230 mm and making angled cuts in the range from 0° to 45°. This makes the machine suitable for metalworking shops, production workshops and anywhere that accuracy, stability and machining speed matter. Main advantages of the machine Automatic tool downfeed increasing convenience and cutting repeatability Hydraulic adjustment of saw arm lowering using a cylinder and an oil flow control valve Cutting at angles from 0° to 45° thanks to the swivelling vice Heavy cast iron vice ensuring stable clamping of the material Blade guides with carbide inserts and bearings affecting cutting accuracy and quality Cooling system supplying coolant to the blade and the cut element Wire brush cleaning the blade preventing the blade from clogging Automatic drive shut-off after completion of the cut by means of a limit switch Construction and technology Dkedpfoy En E Ssx Ak Aow The material to be cut can be fed manually or by means of any mechanical device. The tool feed is automatic, which makes the operator’s work easier and allows stable, repeatable results to be achieved. The lowering speed of the saw arm is adjusted by means of a hydraulic cylinder. The appropriate speed is obtained thanks to a valve regulating the oil flow between the cylinder chambers. This solution makes it possible to adapt the machine operation to the type of material being processed and the expected cutting precision. The required linear blade speed is obtained by changing the ratio on the belt pulleys between the worm gearbox and the drive motor. In the machine base there is a coolant tank with an electric pump, responsible for effective cooling of the blade and the workpiece. Equipment and functions Automatic tool downfeed Hydraulic adjustment of saw arm lowering Swivelling vice with angle scale Quick vice clamp Convenient handle for blade tensioning Blade tension indicator Table for selection of blade tooth pitch and cutting speed Cooling system for the blade and cut material Wire brush cleaning chips from the blade Blade guides with carbide inserts and bearings Automatic limit switch after cut completion Emergency stop of the “mushroom safety” type Technical data Motor 230 V, 50 Hz, 1100 W / 400 V, 50 Hz, 1100 W Blade dimensions 2655 x 27 x 0.9 mm Blade speeds 24 / 36 / 49 / 71 m/min Cutting angle range from 0° to +45° Machine package dimensions 1420 x 500 x 1150 mm Weight 151 / 202 kg Angle 0° Ø 229 191 x 305 max. 355 230 x 230 45° Ø 160 230 x 140 155 x 155

Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw - Hydraulic band tensioning - Servo-controlled feed - Sturdy C-frame - Year of manufacture: 2014 Technical data - Working area (L x W x H): 4000 x 680 x 400 mm - Smallest cutting height: 10 mm Dodpfxjz H Acps Ak Aokw - Minimum cutting width: 15 mm - Inner table support area: approx. 680 x 4000 mm - Inner table maximum load: 7500 kg - Outer table support area: approx. 680 x 4000 mm - Outer table maximum load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tensioning pressure: 85 bar - Coolant capacity: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW - Connection value: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V= (DC) - Current consumption: approx. 25 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 6450 x 2870 x 2350 mm - Weight (net): approx. 10000 kg

Year of construction: 2022, condition: as good as new (ex-display), 1 semi-automatic high-performance horizontal bandsaw with double column guidance and 2° cutting inclination to the table support surface Make:BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Dkjdpfjm Rg H Rox Ak Asw Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform IMMEDIATELY AVAILABLE

Condition: new, Semi-automatic metal bandsaw with high cutting accuracy. This machine allows for stepless 90° cuts, as well as miter cuts, from left 45° to right 30°. (Swivel range: left 45° and right 60°) Standard equipment: - Large, rotatable support table, wear-resistant! (The saw band cutting channel rotates with the miter angle) - Band tension indicator - Hydraulic control of the cast iron saw arm - Hydraulic clamping of the workpiece via short-stroke cylinder - Height limitation of the saw frame via potentiometer from the control panel - Hydraulic cutting pressure adjustment (solid material – pipe) - Lowering of the saw arm via a hydraulic cylinder; stepless adjustment - Manual lifting of the saw arm after the cut - Easy, manual movement of the vise left/right - Electrical band tension monitoring with saw band breakage control - Coolant pump with dual feed to the saw band guides - Carbide saw band guides and guide rollers - Bi-metal saw band M 42 - Chip brush Technical data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20-120 m/min, stepless ● Saw band dimensions: 3125 x 27 x 0.9 mm ● Remaining piece length: 20 mm ● Smallest ø: 5 mm ● Material support height: 775 mm Djdpfx Asd Dpz Sjk Askw ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Condition: new, Bandsaw machine Manufacturer: OPTIMUM Model: S 275 NV Item No.: 3300265 Condition: New machine Cutting capacity (round): 225 mm Cutting speed: 20 - 90 m/min Standard equipment includes: - Horizontal clamping device - Length stop - Automatic shut-off after the end of the cut - Chip removal brush - Coolant system - Operating manual Dkedjdynpcjpfx Ak Ajw

Year of construction: 2009, condition: refurbished (used), This floor standing unit is designed to help you create fruit coulis and purées, vegetable mousses, sauce bases, bisques and fish soups by separating pips, stones, fibres and carcasses without crushing them. The continuous feed system makes it easy to use and a great time saver. Hopper : Continuous feeding of prepared ingredients for increased productivity. Perforated basket :Your products fall inside the basket where they are strained. Dkodpfxsz R Id Ie Ak Aow End product ejection chute:The ready to use pulp is ejected here and is free of pips, stones, skin, fibres and bones. Waste ejection chute: skins, pips, stones, tails, bones, shells, fibres… Paddles: Paddle assembly rotating at 1500 rpm to extract maximum pulp and juice. Production of Pulp: 120 kg per hour Electrics: Single Phase 900 W Rpm: 1500 Dimensions: 1 030 x 400 x 860 Weight: 45kg Available: 1 week for Preparation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, KOLBE K440 | Meat, bone, and frozen food band saw Manufacturer: KOLBE Spezialmaschinen GmbH Model / Type: K 440 (K440) Serial number: 96 0378 Dkjdpfx Ajz S N Uwjk Asw Year of manufacture: 2000 Power supply: 400 V, 50 Hz, 5.4 A Power: 2.5 kW Overall dimensions: 1000 x 1000 x 1900 mm Length and width of the cutting blade: 3370 x 16 mm The KOLBE K440 is a highly efficient, stationary band saw, valued in the food industry, designed for the precise portioning of fresh and frozen meat, bone-in cuts, beef and pork bones, and frozen blocks. Products from the renowned German brand Kolbe are synonymous with reliability, unparalleled performance, and the highest level of operator safety in meat processing. The unit is equipped with a powerful 2.5 kW drive unit, which ensures a constant, high blade speed even when processing the hardest materials. The well-designed ergonomics of the work table, along with the appropriate height and width of the feed, allow for efficient handling of large anatomical pieces. The use of a blade with dimensions of 3370 x 16 mm guarantees clean, even cuts without frayed edges and minimizes material loss in the form of chips.

Condition: excellent (used), functionality: fully functional, 2. Technical Data KASTOfunctional U Dkjdpjyhzi Sefx Ak Asw Cutting Capacities: Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 300 x 260 mm Cutting range 90° square: 260 x 260 mm Cutting range +45° round: 200 mm Cutting range +45° flat (W x H): 200 x 240 mm Cutting range +45° square: 200 x 200 mm Cutting range +60° round: 165 mm Cutting range +60° flat (W x H): 160 x 120 mm Cutting range +60° square: 150 x 150 mm Cutting range -45° round: 200 mm Cutting range -45° flat (W x H): 200 x 240 mm Cutting range -45° square: 200 x 200 mm Dimensions and Weights: Length: 1,014 mm Width: 1,826 mm Height, upper part lowered: 1,462 mm Height, upper part in highest position: 1,899 mm Material support height: 950 mm Total weight: 510 kg Performance Specifications: Year of manufacture: 2000 Total connected load: 2 kW Saw drive motor: 1.5 kW Cutting speed: 30-75 m/min, infinitely variable Saw blade dimensions: 2910 x 27 x 0.9 mm Saw blade guides: Carbide, replaceable Material clamping: Mechanical Feed: Hydraulic Saw blade tensioning: Mechanical Coolant system: Coolant supplied via 1 coolant nozzle and 1 coolant hose Coolant tank capacity approx. 45 liters Pump flow rate: 16 l/min 3. Machine Description Semi-automatic bandsaw machine with a very robust design for efficient handling of all cut-off and mitre cutting tasks (-45°/+60°) in tubes, profiles and solid materials in workshop applications. The steplessly adjustable feed ensures sensitive and tool-friendly sawing. Universal bandsaw for workshop use in a very robust design for cutting profiles, pipes and solid materials. Machine Base Heavy-duty, torsion-resistant welded construction. Saw Blade Guide The side guide for the saw blade is via mechanically preloaded blade brushes. The blade back is guided by idler rollers. Saw Blade Tensioning Continuously adjustable by ratchet. Mechanically limited tension force. Main Saw Blade Drive Drive power: 1.5 kW, cutting speed 30-75 m/min Material Clamping – Machine Vise Secure material clamping using manually operated horizontal vise. Mitre angle continuously adjustable from 0° – 45° and 0° to +60° using a scale. Indexing bolts at positions -45°, 0°, 45°, and 60° for additional mitre locking. Feed Control Saw feed is steplessly controlled via fine throttle, suitable for universal use on solid and profile materials. Accessories: Coolant system

Condition: good (used), functionality: fully functional, Offered is a Kobe K-310 bone saw in good condition. The machine is fully functional and the bearing on the upper wheel has been replaced. New saw blade installed. Saw table dimensions: width 57 cm, depth 78 cm Max. cutting height approx. 35 cm Immediately ready for use, see photos. Further details on request. Payment in cash or in advance. Djdoyh H Rbepfx Ak Ajkw Sale to commercial customers only, no warranty or liability.

Condition: good (used), functionality: fully functional, saw band length: 1,750 mm, saw band width: 16 mm, Bone Saw Mado MKB 649 16A, 380V. Dodpfx Ajya H U Tsk Askw Workshop inspected, defects rectified. Motor brake. New saw band. Inspection and test run possible! Additional machines available. Cash or advance payment! Sale to businesses only. No warranty or guarantee.

Condition: used, Year of construction: 2003, cutting height (max.): 700 mm, total length: 2,180 mm, total width: 900 mm, total height: 1,525 mm, overall weight: 1,100 kg, working height: 700 mm, Double column bandsaw Brand: SABI Model: PBS 320-450 Year: 2003 The Sabi PBS 320 bandsaw is a semi-automatic double column machine designed for metal cutting. Below are its technical features: Cutting capacity at 90°: Round: up to 320 mm diameter. Rectangular: up to 320 x 285 mm. Round: up to 280 mm diameter. Bandsaw blade dimensions: Length: 4570 mm. Width: 34 mm. Thickness: 1.1 mm. Cutting speed: adjustable between 15 and 105 m/min. Main motor power: 4 kW. Working height: 700 mm. Jaw height: 175 mm. Machine dimensions: Length: 2180 mm. Width: 900 mm. Height: 1525 mm. Dkodpfex Tg Unsx Ak Asw Weight: approximately 1100 kg. These specifications make the Sabi PBS 320/450 a robust and versatile choice for cutting operations in workshops and industrial environments.

Condition: used, Block bandsaw Pilous CTR520, good condition, cutting length 5.8 m, max. log diameter 550 mm, 4 kW S1, cutting length 3110 mm, weight 310 kg Price changes and errors, misprints and typographical mistakes reserved. Djdpfxswzzhre Ak Askw

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,250 mm, total width: 1,015 mm, total height: 1,980 mm, warranty duration: 24 months, overall weight: 850 kg, input voltage: 400 V, type of input current: AC, conveyor belt length: 1,630 mm, compressed air connection: 6 bar, product height (max.): 230 mm, tank capacity: 160 l, construction width: 420 mm, air pressure: 7 bar, number of injections: 55, conveyor belt width: 405 mm, Equipment: documentation/manual, REISCHL RPI 62/123 – High-Precision Injector with Smart HMI & Remote Maintenance The RPI 62/123 is more than just a classic injector: it combines robust mechanics with state-of-the-art software for maximum efficiency in food processing. ⭐ Your advantages at a glance Intuitive operation – no training required, ready to use immediately Global remote maintenance – service in minutes instead of days of downtime Automatic reporting – comprehensive quality assurance & documentation at the touch of a button Dkedpfxsw Rf Srs Ak Ajw Future-proof – modular expansion, add-ons can be retrofitted at any time 🚀 Why choose RPI? Other injectors work – but are often complicated and difficult to maintain. 👉 In contrast, the RPI is as easy to operate as a smartphone and as connected as a modern industrial plant. “Service call? Instead of 3 days of downtime, we provide remote support in 30 minutes.” “New requirements? Simply book an add-on—no need for a new machine.” 🔧 Technical highlights Stitch pattern: 62/123 needles Applications: meat, poultry, fish, vegan proteins Precise feed system for even brine distribution Energy-saving LEAN drive Precision needle heads with quick-change bridge system Pneumatic suspension for each individual needle – ideal for bone-in products Stainless steel centrifugal pump with triple filtration system (mechanical/automatic) Hygienic design: complete separation of pump circuit and electromechanics Easy to clean, low-maintenance, long service life 📍 Suitable for Medium to large production lines Meat, poultry, fish, and protein processors Businesses focused on consistent quality and digital control

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 234S, total length: 2,400 mm, total width: 800 mm, total height: 1,255 mm, overall weight: 330 kg, input voltage: 400 V, type of input current: three-phase, power: 2.5 kW (3.40 HP), year of last overhaul: 2025, input frequency: 50 Hz, conveyor belt width: 200 mm, CRM NEXUS 200/1100 chop cutter for whole loins (section 195 x 200 x 1000 mm) 2011 machine, fully overhauled and refurbished in October 2025 Up to 170 slices per minute Cuts with bone Machine in perfect condition Equipped with a cover over the buttons for cleaning Dkedoxwdmyepfx Ak Asw

Condition: good (used), Karpowicz NK 114S Injector with screw pump Pickle injector is appliance designed to intramuscular induction of pickling brine into meat with bone or into meat without bone. Special screw pump can inject pickling brine and dense pickling emulsion. Manufacturer: Karpowicz Model: NK 114S Year: Number of injecting needles (pcs): 114 Number of rows of needles (pcs): 6 Type of pump: Screw pump Height of needle lift: 190 mm Belt width: 600 mm Machine Dimensions LxWxH: 2.600x1.500x2.200 mm Dkjdpfx Akexy If Ej Aew Machine Weight: 1.200 kg.

Condition: refurbished (used), functionality: fully functional, SEPA 2000T separator, ideal for recovering meat from bones and separating soft tissues from hard ones. The device is characterized by high efficiency, which makes it an indispensable element in food processing. Technical specifications: Manufacturer: Sepamatic Model: SEPA 2000T Mesh size: 5 mm Power: 11 kW Power supply: 400V, 50Hz Power consumption: 22A Control voltage: 24V Electrical diagram: No. 0695030 B Made in Germany Dimensions: Dkjdpfx Akjw Dcrke Asw Length: 165 cm Width: 150 cm Height: 200 cm Application: The SEPA 2000T separator is ideal for processing poultry, pork, and beef. Thanks to its 5 mm mesh, it allows for high-quality separation of raw materials while maintaining high efficiency. Why choose the SEPA 2000T? Robust construction High separation efficiency Easy operation and maintenance Compact dimensions ideal for production lines

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, total height: 2,000 mm, total length: 2,000 mm, total width: 2,000 mm, saw band length: 4,115 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsaw in heavy-duty construction, featuring a horizontally parallel-moving saw band, designed for cutting profiles, tubes, and solid material of all qualities, including extremely difficult-to-machine materials (such as titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. Saw unit manufactured in solid polymer concrete, ensuring maximum running smoothness and extended saw blade service life. The saw unit is guided via a vertical and a round-column guide (double-column guide), with hardened and ground guide rails. Hydraulic saw band tensioning and hydraulically preloaded carbide saw band guides. Material clamping is achieved via two hydraulic vises. The machine operation is user-friendly. Cutting length can be set using a hand wheel, with a resolution of 0.1 mm. Piece count is set via a piece counter; upon reaching the set quantity, the machine switches off automatically. Material feed is executed by a feed cylinder, ensuring the highest cutting accuracy. The machines are easy to operate and work fully automatically. Model: SSB 260 VA Cutting capacity: 260 mm x 260 mm (Ø 260 mm) Technical Data: Bandsaw KASTO Bandsaw Automatic Machine Machine Type: SSB 260 VA Technical Data: 2-column guided Year of manufacture: 1991 Cutting range: 260 x 260 mm Drive power, saw gearbox: 4 kW Drive power, auxiliary units: 6.5 kW Cutting speed: 15-125 m/min Saw feed hydraulics: Infinitely adjustable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Maximum feed (multiple feed): 5400 mm Material support height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Dksdpfx Akoxc D Egj Ajw Accessories: - Chip conveyor - Coolant system - Multiple feed - Side guide rollers - Machine roller conveyor - Adjustable side guide rollers - Prepared for bundle clamping device - Multiple feed counter