Used Bridge Saw for sale (6,462)

Condition: used, Year of construction: 2010, power: 30 kW (40.79 HP), cutting width (max.): 3,800 mm, controller model: POWERCONTROL, cutting length (max.): 2,200 mm, Equipment: scorer, TECHNICAL DETAILS Max. panel width: 3,800 mm Max. panel length: 2,200 mm Min. cutting height: 6 mm Max. saw blade overhang: 130 mm Number of tables: 3 Number of grippers: 7 Gripper arrangement: On the sliding stop Max. feed rate: 90 m/min Sawing unit Number of saw carriages: 1 Positioning: NC-controlled Max. tool diameter: 480 mm Motor power: 18 kW Djdpfx Anszmtnljzsck Scoring unit Positioning: NC-controlled Max. tool diameter: 200 mm Motor power: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Machine programming software: CADMATIC 4 Total connected load: 30 kW EQUIPMENT CE marking Barcode label printer The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7875

Condition: used, Year of construction: 2004, saw blade diameter: 180 mm, tool diameter: 450 mm, Equipment: scorer, TECHNICAL DETAILS Sawing carriage Max. saw blade overhang: 125 mm Number of grippers: 11 Max. feed rate: 80 m/min Max. tool diameter: 450 mm Motor power: 21 kW Scoring saw Max. saw blade diameter: 180 mm Motor power: 2.2 kW Max. feed rate: 150 m/min EQUIPMENT Lifting table Scoring unit Barcode label printer Dsdpjzmtm Usfx Anzsck The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 6645

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, saw blade diameter: 5,000 mm, feed length X-axis: 500 mm, type of input current: three-phase, rotational speed (max.): 2,800 rpm, compressed air connection: 7 bar, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw blade diameter: 500 mm Rotational speed: 2,800 rpm Feed length per cycle: 5,600 mm Cutting angle: 90° Miter function depending on machine configuration Dcjdpezqbltjfx Anzok MACHINE DETAILS Suitable materials: Aluminum profiles, thin-walled light metal profiles, window and door profiles Power supply: 230/400 V, 3~ Frequency: 50 Hz Compressed air connection: 7 bar EQUIPMENT Chip extraction

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, cutting length (max.): 4 mm, saw blade diameter: 350 mm, rotational speed (max.): 3,000 rpm, overall weight: 600 kg, power: 4.4 kW (5.98 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Spindle speed: approx. 3,000 rpm Cutting length: approx. 3–4 m Saw blade diameter: approx. 350 mm (300–400 mm) Saw angle: 90° and 45° MACHINE DETAILS Suitable materials: aluminum and PVC profiles Compressed air requirement: 6–8 bar Motor power per head: approx. 1.5–2.2 kW Connection voltage: 400 V Weight: approx. 500–600 kg EQUIPMENT Dcjdpfx Ajzqblaenzsk Pneumatic horizontal clamping devices

Condition: used, machine/vehicle number: 008588, Max. panel width: 1600 mm Dodpfxoy In Avs Anzock Max. panel length: 3700 mm Main saw blade projection: 125 mm No of Grippers: 9 Thin sheet loading: yes

Condition: used, machine/vehicle number: 008589, Max. panel width: 1600 mm Max. panel length: 3700 mm Main saw blade projection: 125 mm Djdpfx Ansy In Apezock No of Grippers: 9 Thin sheet loading: yes

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivel range: up to 45° Saw blade/cutting blade diameter: 200 mm Dedoc Snvfopfx Anzjck Cutting depth: 47 mm Electrical connection: 230 V AC Weight: 14.5 kg

Condition: used, Year of construction: 1995, total length: 2,300 mm, total width: 1,700 mm, total height: 1,500 mm, Colour: Grey Weight: 1.700 kg Multi-blade saw Sicar MS 30 Saw blade min/max 250/350mm Saw blade bore 70mm Width of transport chain 300mm Maximum cutting height 120mm Min. cutting length 420mm 30HP Engine Transport dimensions: 2300x1700x1500mm LxWxH, weight 1700kg - Year: 1995 - Documentation available: Yes - CE certificate present: No - Main motor power [kW]: 22.0 - Arbor hole saw blade diameter [mm]: 65 - Max. saw blade diameter [mm]: 300 - Max. distance between saw blades [mm]: 350 - Max. cutting width [mm]: 350 - Max. cutting height [mm]: 100 - Table length [mm]: 1500 - Table width [mm]: 700 - Conveyor motor power [kW]: 1.1 - Conveyor width [mm]: 300 - Voltage [V]: 380 - Current consumption [A]: 50.1 Dsdswng Uwspfx Anzsck - Fuse [A]: 63 - Power [kW]: 23.1 - Transport dimensions: 2300mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 1700kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1982, total length: 2,700 mm, total width: 2,220 mm, total height: 1,500 mm, Colour: Green Weight: 900 kg - Year: 1982 - Documentation available: No - CE certificate present: No - Serial number: V024400 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1500 - Roller table length [mm]: 2500 - Table width [mm]: 1940 - Max. saw blade diameter [mm]: 350 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 140 - Controlled axes: Tiltable, Scoring unit height, Cutting height - Manually adjustable axes: Tiltable, Scoring unit height, Rip fence, Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - Spindle speed: Manual - └ Min. spindle speed [rpm]: 4000 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Not applicable - Schuinstelbare zaagaggregaat: - └ Max. adjustable [°]: 45 - Voltage [V]: 380 Dodpfxewnh S Do Anzeck - Current consumption [A]: 11 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 2700mm x 2220mm x 1500mm (l x w x h) - Transport weight [kg]: 900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1990, serial number 720340 weight 400 kg Dodpfx Aeztfx Njnzsck volt 380 V band length 3400 mm band length min. 3200 mm

Condition: used, total length: 2,300 mm, total width: 1,600 mm, total height: 1,450 mm, Colour: Blue Weight: 2.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19031 - Main motor power [kW]: 15.0 - Arbor hole saw blade diameter [mm]: 40 - Min. saw blade diameter [mm]: 120 - Max. distance between saw blades [mm]: 2450 - Max. cutting width [mm]: 2450 - Max. cutting height [mm]: 75 Dsdpfxozrza Hj Anzjck - Table length [mm]: 1700 - Table width [mm]: 1000 - Conveyor motor power [kW]: 2.2 - Conveyor width [mm]: 2450 - Voltage [V]: 380 - Fuse [A]: 63 - Power [kW]: 18.0 - Transport dimensions: 2300mm x 1600mm x 1450mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, total length: 3,900 mm, total width: 2,100 mm, total height: 1,520 mm, Colour: Green Weight: 1.500 kg - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: V233567 - Roller table length [mm]: 3200 - Table width [mm]: 1300 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Tiltable - Manually adjustable axes: Cutting height - Options: Scoring unit - └ Pre-cutter saw blade diameter [mm]: 120 - └ Arbor pre-cutter saw blade diameter [mm]: 22 - Spindle speed: Dsdpfxexdlx Rj Anzock - └ Min. spindle speed [rpm]: 2800 - └ Max. spindle speed [rpm]: 5500 - └ Spindle speed control: Incremental - Voltage [V]: 400 - Current consumption [A]: 13 - Fuse [A]: 16 - Transport dimensions: 3900mm x 2100mm x 1520mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, Colour: Blue Weight: 8.000 kg Price: On request - Details: Dcedpeyy Nnqefx Anzsk - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport weight [kg]: 8000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Dcodpfxezryuvo Anzok Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 380 x 250 mm capacity 90 degrees: square 250 x 250 mm capacity 45 degrees: flat 300 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 200 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3770 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight 695 kg dimensions of the machine ca. 1950 x 1300 x 200 mm Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates Dcsdpjxaax Defx Anzjk - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: used, Year of construction: 2016, operating hours: 3,625 h, total length: 13,600 mm, total width: 2,450 mm, total height: 2,450 mm, Colour: Grey Weight: 7.200 kg Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Operating hours: 3625 - Max. cutting length [mm]: 1600 - Max. cutting width [mm]: 4300 - Transport dimensions: 13600mm x 2450mm x 2450mm (l x w x h) - Transport weight [kg]: 7200kg - Transport packages [pcs.]: 8 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Dcodpfjx R A Ufjx Anzek

Condition: used, total length: 1,850 mm, total width: 1,050 mm, total height: 1,400 mm, Colour: Grey Weight: 500 kg Pulp saw Harwi 130 45 degrees  5,5kW - Documentation available: No - CE certificate present: No - Serial number: 130 S - Main motor power [kW]: 5.5 Djdpfx Anszrm S Iozjck - Arbor saw blade diameter [mm]: 30 - Min. saw blade diameter [mm]: 400 - Max. saw blade diameter [mm]: 450 - Table length [mm]: 1500 - Table width [mm]: 1050 - Min. adjustable angle [°]: 0 - Max. adjustable angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 8.5 - Fuse [A]: 16 - Power [kW]: 7.3 - Transport dimensions: 1850mm x 1050mm x 1400mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2015, total length: 2,100 mm, total width: 900 mm, total height: 1,050 mm, Colour: White Weight: 250 kg - Details: - └ Description: Front-wheel drive not available - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: KK/126675 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 840 - Table width [mm]: 560 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 45 - └ Max. adjustable [°]: 90 - └ Cutting height at 45° [mm]: 70 - Voltage [V]: 400 - Current consumption [A]: 10 - Fuse [A]: 16 Dcedpfozrkxrox Anzek - Power [kW]: 3.0 - Transport dimensions: 2100mm x 900mm x 1050mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2017, Behringer HBE 321 A Dynamic, manufactured in 2017 – low operating hours, more information to follow. The machine is currently being delivered. - The photos show the original condition. Dcsdpfx Anezrgn Nszek

Condition: used, power: 5.5 kW (7.48 HP), cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 6,500 rpm, rotational speed (min.): 4,000 rpm, total length: 2,700 mm, total width: 2,000 mm, total height: 1,700 mm, overall weight: 800 kg, No. 3277 Sliding table saw Panhans 684 Used Sliding table length 2600 mm Dcedjzcc R Njpfx Anzsk Cutting width 1250 mm Max. saw blade diameter 450 mm Motor power 5.5 kW Speeds 4000 / 5000 / 6500 rpm Manual saw blade tilting 0° - 45° Manual cutting height adjustment Mitre fence on the sliding table Cross-cut table approx. 1400 x 650 mm LW Cross-cut fence extendable up to 3200 mm Mobile machine base Transport dimensions approx. 2700 x 2000 x 1700 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 73433 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Automatic bandsaw AMADA HFA 400 W (Year of manufacture: 2016) Cutting capacity: Round material: diameter 420 mm Square material: 400 x 400 mm Feed length: 5 - 470 mm Multiple feed length: up to 9999 mm Chip conveyor Drive power: 5.5 kW Dcodpfx Ajzrz Ahenzok Saw blade speed: 15 - 90 m/min, infinitely adjustable Piece counter Weight: 2200 kg *The saw is in very good condition and fully functional.*

Condition: used, Vertical (upright) panel dividing saw, Striebig type Automat TRK 6220 AV, with Schneeberger Positron positioning control for precise horizontal and vertical cutting of wood-based materials, plastics, and composite panels. The automatic version enables efficient, repeatable panel cutting in the furniture, interior design, and panel processing sectors. Can be installed as a free-standing unit or wall-mounted. Technical data: Dsdpszr H Hfsfx Anzock - Cutting length: 5,300 mm - Cutting width: 2,200 mm - Material thickness: max. 80 mm - Motor: 5.5 kW

Condition: used, Year of construction: 2007, 410 mm 430x410 mm capacity 90 degrees: round 410 mm capacity 90 degrees: flat 700x410 mm 410 mm 500x410 mm 320 mm 320x410 mm Dcsdpfxoztft Te Anzek dimensions of saw-band 5800x41x1,3 mm total power requirement 5,5 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. 3500x2800x2000 mm

Condition: good (used), Year of construction: 1974, KAMRO FK Panel and Rip Saw Panel saw with extensive accessories Year of manufacture: 1974 Saw blade, max. diameter: 400 mm (currently fitted with a 300 mm saw blade) Rip fence length: 3000 mm Cutting height, max.: 50-125 mm Table size: 1180 x 670 mm Table extension: 1000 x 300 mm Table extension width: 700 x 565 mm Dsdszrtwqjpfx Anzeck Drive (kW/HP): 4.0/5.5 Saw spindle speed: 4000/5000/6500 rpm Weight: 800 kg

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Dcedpfx Anozrpl Dezek Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition