Used Bridge Saw for sale (6,571)

Condition: excellent (used), Year of construction: 1999, Veneer saw and precision cutting saw with a scoring unit and veneer stop table. A video of the machine in operation can be sent upon request. Dwodpfe Ahrgaox Ai Ejd For tear-free and gap-free cutting of veneer, including thick-cut veneer. Cutting length max. 4200mm. The saw unit and scoring unit are combined in a single unit, so that only one unit needs to be moved. Easy-to-guide saw unit, runs on ground and hardened shafts. The function of the scoring blade with two diamond cutting edges is comparable to that of a planing head. Rear support table with a continuous finger stop, adjustable from approx. 2 - 50cm, with pneumatic clamping. Pneumatic workpiece clamping. Veneer support made of wear-resistant hard plastic. Drive motor 2.2kW. Carbide-tipped precision cutting blade, sharpened. Scoring blade with PKD (polycrystalline diamond) tips, sharpened. Practical front veneer support. Angle stop on the left. Dust extraction connection 80mm. Dust extraction hoses and V-belts renewed. Maintenance unit and compressed air hoses renewed. CE marking. Operating manual. Onboard tools. Saw blade and re-cutting blade freshly sharpened, so ready for immediate use. Partially repainted. Dimensions approx. 5550 x 1200 x 1600mm (L x W x H). Weight approx. 800kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock, see "other offers from this supplier".

Condition: used, Year of construction: 2001, functionality: fully functional, Sabi PSR 360/600 bandsaw, semi-automatic Sabi bandsaw, all carbide (WIDIA) blade guides and seals and scrapers of the saw's lift/lower cylinder have been replaced. Cutting capacities: max diameter 320mm, rectangle 600 x 300mm, at 45º: 375 x 300mm. Cutting speed 15 to 105 m/min, main motor 2.2kW, total power 2.5kW, estimated weight 1900kg. Machine with rotation function, in very good condition. Dwedpoxf Tvmofx Ai Ejd

Year of construction: 1995, condition: ready for operation (used), functionality: fully functional, cutting angle (max.): 30 °, machine/vehicle number: M3378, For sale: large band saw for soft materials. Dwodpfx Aezfwfxsi Ejd Outreach: 1.25 m, allowing you to cut through material up to 2.5 m wide. Cutting height: approx. 90 cm. Cutting length: approx. 2.3 m. The upper part can be tilted electrically to the left and right up to 30 degrees, making this a special sawing machine. Well-maintained machine with few operating hours. Fecken Kirfel – German quality. Installation and adjustment can be arranged upon request.

Condition: used, Year of construction: 2020, Multi-blade saw Manufacturer: SCM Type: Class M3 Year of manufacture: 2020 Technical data: Transport chain width: 300 mm Max. saw blade diameter: 350 mm Min. saw blade diameter: 200 mm Maximum cutting height: approx. 110 mm Minimum workpiece length: 390 mm Saw blade bushing bore: 70 mm Saw blade bushing clamping width: 300 mm Saw spindle speed: 4,200 rpm Feed rate: 6.48 m/min Dwsdps Aig E Usfx Ai Eed Working table height: 750 mm Working table dimensions: 1,530 x 950 mm Main motor: 25.5 kW Feed motor: approx. 1.1 kW Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 5 h, cutting height (max.): 490 mm, cutting width (max.): 750 mm, roller diameter: 540 mm, pivoting range: 60 °, Like-new machine with only 5 operating hours! TECHNICAL DETAILS Cutting width: max. 750 mm Cutting height: max. 490 mm Roller diameter: 540 mm Swiveling range: 60° Table height: 800 mm Cutting diameter at 90°: max. 540 mm Rectangular cutting area at 90°: 750 × 490 mm Swiveling range: up to 60° in both directions Saw blade dimensions: 6,880 × 41 × 1.3 mm Saw blade speed: 15–150 m/min Drive power: 5.5 kW Dwjdpfx Aij Aggc Ij Ejd Speed: max. 150 rpm Speed: min. 15 rpm Type of operation: electric MACHINE DETAILS Control type: PLC-controlled Input voltage: 400 V Input frequency: 50 Hz Input current type: three-phase Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,500 x 2,000 mm Total weight: 2,370 kg Operating hours: 5 h EQUIPMENT Lighting Documentation / Manual CE marking

Condition: used, total length: 2,100 mm, total width: 900 mm, total height: 1,050 mm, Year of manufacture: 2015 Colour: White Weight: 250 kg - Details: - └ Description: Front-wheel drive not available Dwedpszrkxrsfx Ai Eod - Year: 2015 - CE marking present: Yes - Serial number: KK/126675 - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 100 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 840 - Table width [mm]: 560 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 315 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 45 - └ Max. adjustable [°]: 90 - └ Cutting height at 45° [mm]: 70 - Voltage [V]: 400 - Current consumption [A]: 10 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 2100mm x 900mm x 1050mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. Dwsdpfx Aie Agnz No Esd An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification 6000mm infeed capacity Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ* DPPD III 50E 530/150 multi-blade slitting saw Catalog number 7405 TECHNICAL DATA - max. cutting height 150mm - max. workpiece width 700mm - working width of the saw mandrel 530mm - max. saw blade diameter 450mm (installed 350mm) 350mm - arbor bore diameter 90mm from above: - pawls - 2 toothed draw shafts from below: Dwjdpfe Agupfsx Ai Eed - 2 smooth draw shafts - saw mandrel - smooth draw shaft - 4 feed speed settings - feed motor approx. 2kW - 30kW motor - machine dimensions L/W/H 2400x1700x1900mm - weight approx. 3000kg – Polish production – Used machine, very good condition Net price: 38900 PLN Net price: 9050 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously introduced to the market. We have no business relations with the manufacturer.

Condition: used, total length: 3,450 mm, total width: 2,200 mm, total height: 1,500 mm, Year of manufacture: 2004 Colour: Green Weight: 1.500 kg - Year: 2004 - CE marking present: Yes - Serial number: - Main motor power [kW]: 5.5 - Parallel stop displacement [mm]: 1350 - Roller table length [mm]: 3400 - Table width [mm]: 1450 - Min. saw blade diameter [mm]: 200 - Max. saw blade diameter [mm]: 450 - Arbor saw blade diameter [mm]: 35 - Dust extraction nozzle diameter [mm]: 115 - Controlled axes: Tiltable, Rip fence, Scoring unit height, Scoring unit lateral adjustment, Cutting height - Electrically adjustable axes: Rip fence, Cutting height, Tiltable, Scoring unit lateral adjustment, Scoring unit height - Spindle speed: Manual - └ Min. spindle speed [rpm]: 3000 Dedpfxj Aazbkj Ai Eowd - └ Max. spindle speed [rpm]: 6000 - └ Spindle speed control: Incremental - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: -3.1 - └ Max. adjustable [°]: 43.8 - Voltage [V]: 400 - Current consumption [A]: 13.5 - Fuse [A]: 16 - Power [kW]: 7.0 - Transport dimensions: 3450mm x 2200mm x 1500mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), BANDERA circular saw for window profiles. Dedpfx As Aiczqsi Eswd

Condition: used, Year of construction: 2000, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 550 mm, cutting width (max.): 650 mm, total length: 2,250 mm, total width: 3,700 mm, overall weight: 2,400 kg, Equipment: CE marking, documentation/manual, lighting, motor brake, For sale: immediately available, fully operational vertical bandsaw, Friggi 104/FG 700 TS, manufactured in 2000. Work surface: 1200mm x 1500mm Dwjdpfxezvhr Ds Ai Eod Table load capacity: 1000kg Vertical cutting capacity: 550mm Horizontal cutting capacity: 650mm The machine is available for immediate delivery! Technical specifications can be found in the photo!

Condition: good (used), Year of construction: 1979, Veneer Saw FSK Year of manufacture: 1979 Pneumatic 1.8 kW, 380 Volt Cutting length: 3000 mm Cutting height: 40 mm Saw blade: 180 mm Depth to stop: 500 mm Required space: 4000 x 1200 x 1300 mm Weight: approx. 500 kg Dwsdpfx Aem Dr Ursi Ejd Due to the age of the used machine, warranty is excluded for commercial customers upon sale.

Condition: good (used), Code: 0516 Brand: OMS SALVARANI - ITALY Model: FC 300 R SUPER - CE Standard Cut-off saw with dust extraction base for cutting frames, wooden and aluminium profiles, joinery, furniture, fittings, Pvc, plastics and various other materials – CE Standard Technical specifications: Blade diameter mm 300 Hole 30 Revolutions per minute rpm 2800 Three-phase motor power 2,5 Hp Dwsdpfxs Ah H Iae Ai Esd Cutting capacity 110 x 140 mm Base with dust extraction system Overall dimensions mm 800 x 600 x 1,400 h Weight kg 80

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Dwsdo Afznujpfx Ai Ejd Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: good (used), Year of construction: 1986, functionality: fully functional, Equipment: saw blade guard, scorer, The panel saw comes with approximately 10 saw blades and scoring saws, as well as a laser. Dwsdpfx Aey Suidsi Esd

Condition: used, Year of construction: 2007, Cutting height at 90°: 170 mm Cutting length: 410 mm Horizontal miter range: 45°-90°-25° Dsdpj Af Hngofx Ai Eswd Vertical miter range: -60° to +60° Roller track/support table: no Saw blade diameter: 420 mm Rotational speed: 2800 rpm Motor power: 3 kW Motor brake: yes Feed brake: yes Clamping device: yes, pneumatic Cooling system: yes Dust extraction connection: 100 mm Machine length: 1.20 m Machine width: 0.70 m Machine height: 1.50 m Weight: 110 kg

Condition: used, Year of construction: 1973, Max. cutting length 3200 mm (distance from 1st to 3rd saw blade) with left-side circular saw tiltable up to 45°. Cutting capacity 2200 x 2500 mm. 3 motors, each 4.5 kW. Both cross-cut saws tiltable from 45° to 90°, each with a scoring motor. All three saws up to 400 mm diameter. Minimum cutting width 210 mm. Both scoring saws pneumatically moved forward and back with vacuum suction cups for panel fixation. Storage location: Nattheim. Dsdpfsvvkm Iox Ai Eewd

Condition: used, Year of construction: 1984, Table length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 145 Scoring saw: no Saw blade height adjustment: manual / hydraulic Saw blade swivel adjustment: manual / hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Crosscut fence display: scale Saw blade diameter: Speeds: 4 Dwsdps Af Hmpefx Ai Eod Motor power: 5.5 kW Motor brake: yes Dust extraction connection: 80 mm and 120 mm Machine length: 3000 mm Machine width: 1700 mm Weight: 1000 kg

Condition: excellent (used), CATALOG NUMBER: 7991 Djdpfxjztq Nts Ai Eowd TECHNICAL DATA - max. disc diameter: 400mm - disc bore diameter: 30mm - disc guard - adjustable arm (up/down) - max. cutting height: 120mm - max. cutting width: 540mm - hydraulic saw feed - 3 feed rollers in the table - motor: 3.7kW - hydraulic pump motor: approx. 0.55kW - dust extraction port diameter: 110mm - roller width: 530mm - machine dimensions (L/W/H): 1900x1500x1950mm - weight: 650kg ADVANTAGES – Made in Poland – DTR documentation included – Very good condition – Used saw Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2019, Very well-maintained used band saw from Bomar. Type: Workline 610.450 DGH Capacity: 610 x 450 mm Semi-automatic Includes roller conveyors with a manual measuring system. More photos will follow. Djdpfx Aio Ah Svgs Eowd

Condition: used, Year of construction: 2014, Panel dividing saw Manufacturer: SCM Type: Sigma Prima50 Dwodpo Aig Hcsfx Ai Eod Year of manufacture: 2014 Technical data Saw blade overhang: 50 mm Cutting length: 3,300 mm Cutting depth: 2,100 mm Max. cutting height: 50 mm Work table height: 950 mm Number of panel clamps: 5 pieces Saw carriage speed: 63 m/min Slider speed: 24 m/min Main saw blade diameter: 300 mm Main saw blade bore: 80 mm Main saw blade speed: 4,600 rpm Main saw motor: 7 kW Scoring saw blade diameter: 160 mm Scoring saw motor: 1.3 kW Scoring saw speed: 6,300 rpm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) Dodpfxewtdi Ao Ai Eswd - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: used, Year of construction: 2004, Horizontal band saw HEMA HTR 600 Dedpfj Aigk Tjx Ai Eewd Year of manufacture: 2004 For various materials (depending on the installed saw blade) Technical data: Wheel diameter: 600 mm Working height: 955 mm Total height: 1800 mm Total width: 2550 mm Total length (conveyor belt): 2820 mm Max. cutting height (distance conveyor belt - saw blade): 140 mm Saw blade length: 5600 mm Saw blade width: 8 to 25 mm Saw blade thickness: 0.65 mm Cutting speed: 1640 m/min Conveyor belt speed: 0.5 to 5 m/min Conveyor belt width: 650 mm Weight approx. 700 kg Dust extraction connections - Cutting point: 100 mm - Deflection point: 100 mm - Conveyor belt extraction connection: 100 mm Motor power - machine: 2.2 kW Motor power - feed: 0.12 kW Voltage: 3 x 400V

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL INFORMATION Manufacturer: Eisele Type: LMS III-D Machine number: 3.028 Year of manufacture: 1975 Machine type: Metal circular saw ELECTRICAL DATA Operating voltage: 220–380 V Dwodps Aduyhjfx Ai Eod DRIVE Speed: up to 2,800 rpm TOOL Grinding wheel diameter: 250 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 700 mm Width: 500 mm Height: 1,000 mm Weight: 150 kg

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 566-06124, functionality: fully functional, Doall automatic bandsaw in good working condition. Dsdpfex A S Agjx Ai Eewd Cutting capacity round: 335 mm Year of manufacture: 2006