Used Bundle Turner for sale (549)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, 30 packs/min – Siemens Simatic OP7 Shrink wrapping and bundling machine suitable for cosmetics and small packaged products. The machine forms bundles and wraps them in film, followed by a shrink tunnel for tight packaging. Equipped with upper and lower film reels and a manual film splicing system. The shrink tunnel features a cooling section at the exit and adjustable speed control. The machine accommodates different product and bundle formats and is supplied with documentation. Maximum output: 30 packs/min Hinge chain conveyor width: 80 mm Shrink tunnel conveyor width: 480 mm Control panel: Siemens Simatic OP7 Iedpfx Abeyt Hiqoveic Film system: Upper and lower film reels with manual splicing Shrink tunnel: With cooling section at the exit Speed control: Adjustable Product size (min / max) Length: 50 – 100 mm Height: 100 – 300 mm Width: 25 – 60 mm Bundle size (min / max) Length: 75 – 330 mm Height: 100 – 300 mm Width: 50 – 100 mm Additional information Overfeed system included Upper and lower film roll holders Documentation available

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Machine refurbished by Nodema for packaging products in bundles. The machine has a heat-shrink tunnel attached to the frame for packaging. It can process up to 17 products per minute. The sealing bar is 600mm wide. The film width is up to 800mm. Ijdpfey Tuxzox Abvoic This machine has an angled infeed, making it ideal for packaging products such as canned beverages with a tray.

Condition: used, Year of construction: 2010, functionality: fully functional, type of input current: three-phase, cutting length (max.): 12,000 mm, cutting width (max.): 640 mm, saw drive: 15,000 W, input voltage: 400 V, wheel diameter: 600 mm, – Year of manufacture: 2010 TECHNICAL SPECIFICATIONS: – Motor: 15 kW Cutting dimensions: – max. log diameter: 95 cm – clearance between rollers: 73 cm – max. cutting width (square timber): 64 cm – max. cutting height above saw blade: 39 cm – max. cutting length: 12 m Saw head equipment: – automatic cutting thickness adjustment device – electric head height adjustment: up/down – electric forward/reverse head feed: infinitely variable feed speed – electric saw blade guide arm – hydraulic sawblade tension system with air cushion – debarking unit Sawblade: – length: 4670 mm – width: 38 mm - 50 mm – sawblade guide wheels diameter: 600 mm – belt type: Z – material: cast iron The sawmill is equipped with full hydraulics: – hydraulic leveling system Iodpfoy Na Hvex Abveic – side stops – material clamp – comb-type log turner – 3 loading arms Machine dimensions: – length: 1520 cm – width: 235 cm – height: 240 cm

Condition: used, Hot spraying of the empty bottles from below using nozzles on a 3 metre long cleaning section for pre-rinsing and to reach the filling temperature. Overturning of the bottles at the inlet and outlet of the machine. Equipped with water tank, heater and circulation pump. With dosing connections for water treatment. Additional title: bottle spraying with heatable water tank Capacity of filling line: 5000 bo/h Length of cleaning line: 3 m Features: bottle turners; water tank with heater, circulation pump and dosing connections Iisdew Tmmpspfx Abvsc

Year of construction: 2001, condition: used, Crate washer for PETCYCLE plastic crates Additional title: Crate cleaning system Capacity: 2950 crates/h Power: 18 kW Current: 38 A Voltage: 230/400 V Isdox T Avnspfx Abvjic Frequency: 50 Hz Length: 7300 mm Width: 1570 mm Height: 1710 mm Weight: 1900 kg Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Running direction: transverse Material: stainless steel Position: free standing Base construction: Self-supporting machine housing in block construction on spherical feet Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner,

Condition: used, Year of construction: 2001, Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner. Additional title: PET bottle ejection system Capacity: 4000 crates/h Power: 2,8 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 1 m³/h Length: 3000 mm Width: 1910 mm Height: 3830 mm Weight: 2500 kg Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Operation / Control: Simatic S7-300 Material: stainless steel Position: free standing Iisdpjx T Ayyjfx Abvjc Base construction: Stainless steel square tube construction on spherical feet Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Condition: used, Year of construction: 2006, Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner. Additional title: semi-automatic Capacity: 240 cph Power: 0.3 kW Current: 1,85 A Iisdpfx Abovcqpijvec Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Operation / Control: SPS S7-200 Features: Single-point, semi-automatic canner Transport unit washer and turner

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 2 A, input frequency: 50 Hz, power: 0.48 kW (0.65 HP), For sale is a Mosca strapping machine P-5, year of manufacture 2006, suitable for bundling newspapers, magazines, or shipping cartons. The machine has seen very little use and was stored for 6 years in between. The strapping cycle is triggered manually via foot pedal. Strapping band width: 5 mm, cycle speed: 50 to 55 strapping cycles per minute, automatic band threading and strap end ejection, electronic tension adjustment via potentiometer, and a soft tension button. Iisdpfxsy Ew N To Abvoc The machine has been fully overhauled and is in very good condition. Frame size: 600 x 500 mm. Video available on request. Inspection and test run can be arranged by appointment. Free delivery within 200 km around Vienna. We can secure and pack the machine on a pallet for transport by freight carrier or for self-collection. Model: RO-M-P5 Serial Number: 87878 Power configuration: 1L~N~PE Voltage: 230 V Current type: AC Power: 0.48 kW Frequency: 50 Hz Current: 2.6 A Year of manufacture: 2007 Control voltage: V Control current type: DC If you have any questions or need more information, feel free to send us a message or call us.

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: GTX-423, number of ink cartridges: 6, color channels: CMYK+2x WHITE, year of last overhaul: 2026, Complete professional DTG production line — Brother GTX Pro + Schulze Pretreatmaker IV + Tesoma Mini Conveyor Dryer + Drucktech Double Transfer Press Due to a change in business operations, we are offering our complete DTG production line for sale. All machines are in very good to as-new condition and have received professional maintenance weekly since commissioning. A comprehensive PDF with photos, serial numbers, and specifications is available upon request. Brother GTX Pro DTG Printer S/N: K0937196 — Firmware 1.32.0002 Print count: 33,675 Printheads in excellent condition, nozzle check 100/100 for both color and white (as of 30/11/2025) New fan filters, new wiper cleaners (color and white) Ink cartridge stock included: 2x Yellow, 1x Magenta, 2x Cyan, 2x Black, 1x White + 2x White already installed in the printer (all new) Complete platen set: Oversize Platen, Adult Platen, Youth Platen, Mini Platen, Sleeve Platen, and Cap Platen Schulze Pretreatmaker IV As-new condition Equipped with new spray nozzles, delivers perfect spray performance Tesoma Mini Conveyor Dryer As-new condition, Made in Germany Drucktech Double Transfer Press + air compressor Iijdpey Swi Tjfx Abvjc As-new condition All machines available as a bundle or individually. Sale as a complete set is preferred. Collection in Rotterdam (NL); shipping across Europe negotiable. On-site demonstration possible. Asking price for complete set: €16,500 excl. VAT (individual prices on request) Interested or have questions? Reply via this platform or send a message to receive the full PDF with additional photos and specifications.

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. Iiodpfx Aboy Dtpmsvsc MG 3 Chip Extraction Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Condition: ready for operation (used), Year of construction: 2011, Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026. Iedpfoy T N Htox Abvoic

Condition: used, Year of construction: 2003, Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour shrink-wraps products efficiently. Consequently, its fully automated structure and production capacity of 1200 bundles per hour ensure high performance. Technical and Functional Specifications The Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour operates with a continuous motion system, thereby maintaining a steady production flow without interruptions. Moreover, the wrapping process applies shrink film, effectively packaging bottles, cartons, and other containers. In addition, the system supports high-speed production lines, thus minimizing downtime and optimizing operational efficiency. Furthermore, the machine incorporates a straight inline feed system, which allows it to adapt to different conveyor speeds while integrating seamlessly with other machinery in the bottling line. As a result, this configuration simplifies integration into existing plants without requiring complex structural modifications. Shrink Film Characteristics In particular, the Used Shrink Wrapper Tetra Pak  applies standard shrink film, thereby eliminating the need for printed film support. As a consequence, this design increases flexibility in packaging material selection and significantly reduces operating costs. Therefore, the machine remains suitable for diverse industrial applications. Bundling Capability Notably, the bundling system of the Used Shrink Wrapper Tetra Pak creates packs with or without trays, depending on the chosen configuration. Additionally, the machine accommodates various container formats, including bottles, bricks, and cartons, thereby providing high flexibility in production management. Since it runs at 20 bundles per minute, the system efficiently delivers 1200 bundles per hour, making it an excellent choice for high-production plants aiming to optimize workflow. Consequently, businesses can enhance their operational throughput significantly. Shrink Tunnel Isdpfjv Ew Iwjx Abvoic The Used Shrink Wrapper Tetra Pak includes a high-efficiency shrink tunnel, which ensures uniform sealing and tightening of the film around the bundle. Additionally, the system regulates temperature control, thereby guaranteeing optimal shrinkage without damaging packaged products. As a result, this feature preserves packaging quality and minimizes production waste effectively. Operating Conditions and Safety of the Used Shrink Wrapper Tetra Pak At present, the Used Shrink Wrapper Tetra Pak year 2003 1200 bundles/hour remains in storage condition, thus making it ready for reinstallation and operation. Furthermore, the system incorporates safety devices that protect operators during use, thereby minimizing accident risks and ensuring compliance with industrial regulations. Manufactured in 2003, the Used Shrink Wrapper Tetra Pak continues to provide an efficient, robust, and easily integrable packaging system. Moreover, its modular structure and compatibility with various packaging materials make it a versatile solution for multiple sectors in the food and beverage industry. Ultimately, this machine enables companies to optimize their packaging operations while maintaining high standards of safety and efficiency

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration Isdpfx Absv U Ni Ssveic 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Year of construction: 2013, Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pieces per carton, with an adjustable configuration based on container volume. Similarly, the machine operates with American boxes, a widely used packaging type in the industry to ensure product protection and durability. Electrical Specifications and Energy Consumption Furthermore, the system operates with a voltage of 380V, a power consumption of 10 kW, and a frequency of 50 Hz, meeting industrial standards for this type of machinery. Given these specifications, the shrink wrapper dimensions are 3400 mm in length and 2400 mm in depth, making it compatible with many existing production lines. Container Compatibility In particular, the Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  processes various types of containers, primarily focusing on glass bottles and cans, offering operational flexibility for different industrial sectors, including the beverage and food industries. As a result, manufacturers benefit from a machine that efficiently handles diverse packaging needs. Operational Status and Maintenance Notably, the machine is currently in production, ensuring full operational functionality and proper performance of all its components. Additionally, both technical manuals and safety protections are available, complying with industrial safety regulations. In addition to these features, the shrink wrapper has undergone periodic revisions, maintaining consistent performance and minimizing the risk of machine downtime. Furthermore, spare parts are available, facilitating routine and extraordinary maintenance without affecting productivity. Conclusion of this Used Shrink Wrapper ITAL PAL Iedpfx Abjv Ew Rlovjic To sum up, the used ITAL PAL FCN70 + PK300T1 shrink wrapper is an optimal solution for those seeking a reliable machine with high production capacity. Consequently, its versatile configuration, compatibility with different packaging formats, and guaranteed maintenance make it ideal for automated packaging lines. Given its efficiency, the 1650 bundles per hour speed, combined with compatibility with neutral and printed films, makes it a strategic choice for optimizing industrial packaging processes. Therefore, this machine is an excellent investment for businesses aiming to enhance their packaging efficiency.

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats Iodsh Nrh Uspfx Abvsic A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Year of construction: 2001, condition: excellent (used), functionality: fully functional, Compost Turner BACKHUS 10.10. Iisdpjy Equ Hefx Abvjc Diesel engine: 264 hp Weight: 14.9 t Current videos can be provided upon request.

Condition: excellent (used), Year of construction: 2012, section dimension max. 150 x 50 mm pipe Ø 50 – 150 mm wall thickness 1,5 - 5,5 mm reference material (tensile strength) 600 N/mm² coil Ø max. 2.100 mm coil weight max. 10 t finish pipe length max. 9.000 mm round pipe Ø according to list rectangular pipe according to list speed 100 m/min working direction left → right Iiedpfxsuc Sw As Abvsc The line consists of: 1. entry part: double carousel decoiler coil opener/pinch roll unit/leveller crop shear strip tail end welding machine strip guide strip twister/pinch roll unit/strip accumulator entry strip accumulator edge trimming exit twister 2. forming part: No. of horizontal stands: 4 No. of vertical stands: 3 3. welding part (HF) 4. calibrating part 5. separation 6. edge bevelling 7. blowing out 8. bundling 9. hydraulics 10. electrics

Year of construction: 2010, condition: ready for operation (used), A plasma cutting system is offered. Cutting current: 20A - 130A, cutting voltage: 88V - 132V, supply voltage: 400V, max. current consumption: 46A, max. gas inlet pressure: 12bar, ignition voltage: 17kV, gas flow O2: 5300l/h, gas flow N2: 3300l/h, gas flow air: 3200l/h, protection class: IP22. Equipped with automatic gas console, plasma gas control PGC control unit, extensive hose package bundle, mobile machine frame. Machine weight: approx. 350kg, machine dimensions X/Y/Z: approx. 1100mm/700mm/1450mm. Inspection possible by arrangement. Iisdsy Tauhepfx Abvsc

Year of construction: 2011, condition: ready for operation (used), A fully automatic band saw is offered. Band length: 4240mm, saw band dimensions X/Y/Z: 4240mm/34mm/1.1mm, cutting capacity: approx. 320mm, square cutting capacity X/Y: 320mm/320mm, cutting speed: 15m/min - 100m/min. Equipped with CNC control, fully automatic material feed, hydraulic saw band tensioning, integrated coolant system, chip conveyor, bundle clamping device. Machine weight: approx. 1650kg, machine dimensions X/Y/Z: approx. 2250mm/2100mm/1500mm. Inspection possible by arrangement. Iiodjy Taunopfx Abvec

Condition: new, functionality: fully functional, 2 speeds 35/75 m/min Saw blade speed 15-150 m/min Saw blade dimensions 4200x34x1.1 mm Cutting range at 90 degrees: round 325 mm Cutting range at 90 degrees: flat 500x300 mm Cutting range at 45 degrees right: round 300 mm Cutting range at 45 degrees right: flat 300x300 mm Cutting range at 30 degrees right: round 200 mm Cutting range at 30 degrees right: flat 200x200 mm Cutting range at 45 degrees left: round 300 mm Cutting range at 45 degrees left: flat 300x300 mm Minimum remnant length without bundle clamping – manual 85 mm Minimum remnant length with bundle clamping – manual 260 mm Smallest diameter 5 mm Iodpjx Sq Tfjfx Abvoic Working height 750 mm Total power requirement 3.0 kW Dimensions 1450x2200x1400 mm Equipment/Accessories: - Rapid mitre adjustment from 30° to 150° stepless, digital mitre display to 0.1° - Quick material clamping: Material is clamped parallel at 90° in every saw frame angle - MEBA high-performance package version “HSS” – Hydraulic lifting and lowering of the saw frame and hydraulic clamping of the material Stepless hydraulic cutting pressure and feed regulation Display of lowering speed via scale. Cut-through display via manometer. Rapid saw frame lowering via push button to material edge - Frequency-controlled AC drive 15–150 m/min – 3 kW - Full-stroke hydraulic material clamping - Machine base with chip collection tray - Saw blade drive with limit switch - Precision saw blade carbide roller guides, saw blade brush - Complete coolant system with electric immersion pump - 1 saw blade on the machine, 4-6 TPI

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, CNC two-column miter bandsaw – fully automatic Equipment: - Bundle tensioning - Chip conveyor - Laser for cutting to marked lines - Laser for cutting with infeed automation - Clamping pressure adjustment - Hydraulic belt tension indicator - Digital miter angle display Iodpfx Aey S S Tmjbvoic - Digital display of cutting speed Technical data: - Cutting range 90° Round Ø 330 mm, square 330 mm x 330 mm Rectangle 510 mm x 330 mm - Cutting range 45° Round Ø 330 mm, square 310 mm x 310 mm Rectangle 340 mm x 300 mm - Cutting range 30°/60° Round Ø 230 mm, square 210 mm x 210 mm Rectangle 240 mm x 200 mm - Drive power 3 kW - Single feed length 550 mm - Cutting speed, continuously variable 20-90 m/min - Bandsaw blade dimensions 4780 x 34 x 1.1 mm - Dimensions l x w x h = 2484 mm x 2477 mm x 1636 mm - Weight approx. 1700 kg

Condition: used, US-2100 - 75 mm Iijdpjwrp Insfx Abvec Increasingly wider bands are being demanded for the logistical and sales-promoting bundling of units. The US-2100 with its unique ultra-sonic sealing processes paper and plastic bands with a width of 75 or 100 mm. The bands offer plenty of space for printing marketing-related information. The machine is easily accessible, usable in small spaces, and offers high safety.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, input voltage: 400 V, empty load weight: 6,000 kg, coolant pump power: 180 W, saw band length: 7,600 mm, saw band width: 50 mm, AMADA HFA 700 CNC – Fully Automatic Heavy-Duty CNC Band Saw Industrial metal cutting | Serial production | AMADA Japan The AMADA HFA 700 CNC is a fully automatic horizontal CNC band saw for metal cutting, designed for heavy-duty industrial applications and high-volume serial production. Its rigid 6000 kg construction and proven AMADA technology ensure stable, precise, and repeatable cutting results. Key advantages: Iodpfx Abjyc H H Ujvjic ● fully automatic CNC band saw for metal ● AMADA – industrial-grade quality ● heavy-duty design, machine weight 6000 kg ● rigid frame minimizing vibration ● 7.5 kW saw motor ● hydraulic blade tensioning ● industrial blade size 7600 × 50 × 1.6 mm ● advanced CNC control – automatic cutting cycles ● ideal for serial production and continuous operation ● suitable for solids, profiles, and bundled materials Technical specifications ● Control system: CNC ● Saw motor power: 7.5 kW ● Hydraulic motor: 2.2 kW ● Coolant pump: 180 W ● Wire brush motor: 200 W ● Blade dimensions: 7600 × 50 × 1.6 mm ● Blade tensioning: hydraulic ● Power supply: 400 V / 50 Hz ● Connected load: 14 kVA ● Machine weight: approx. 6000 kg Condition: used, fully functional, ready for operation 📩 Contact us for price and further technical details.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10469 Manufacturer: JAESPA Type: Comfort 420 A Year of construction: 2012 Storage location: Halberstadt Machine-No.: 233XXXXX Weight Of The Machine Ca.: 2500 kg Machine length: 2400 mm Machine width: 2800 mm Machine Height: 1700 mm Bending capacity square tube: 420 x 420 mm Bending capacity round bar: 420 mm Bundle min.: 215 x 65 mm Bundle max.: 420 x 170 mm Flat: 420 x 420 mm Roll diameter: 590 mm Saw band dimensions: 4100 x 1300 x 4780 mm Ijdpoy Ed D Dsfx Abveic Belt speed: 15 - 100 m/min. Operating pressure: 50 bar Flow rate: 6,5 l/min Tank capacity: 40 liter Coolant content: 50 liter Material support height: 800 mm Saw motor: 5,5 kW hydraulic motor: 0,75 kW coolant pump: 0,12 kW Chip brush: 0,09 kW Chip conveyor: 0,18 kW Measurement standard: DIN EN 23746

Condition: new, Year of construction: 2025, Schnittbereich rund: 530 mm Cutting area, square (W x H): 530 x 530 mm Smallest size that can be cut: 20 x 20 mm Iiedpowqchlefx Abvsc Clamping range: 0 - 530 mm Bundle cutting range (min. W x H - max. W x H): 145 x 110 - 270 x 200 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 190 mm Shortest remaining piece length in single cut: 20 mm Length: 2220 mm Width including chip conveyor: 3530 mm Height: 2530 mm Weight of machine approx.: 3700 kg Electrical connected load: 11,5 kW Saw motor power: 7,5 kW Hydraulic motor power: 1,5 kW Cutting speed continuously adjustable: 20 - 80 m / min Feed speed of the saw: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Length of automatic material feed, multiple strokes: 9999 mm Dimensions of the saw blade: 6300 x 54 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyPermanent magnetic synchronisation. MotorSaw arm Anti-collision detectionLED work lightLaser line projectionSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMain drive Precision gearboxSplit vice clampingMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade