Used Calibration for sale (1,009)

Condition: used, Hardness tester, hardness measuring machine, hardness tester, hardness tester, impact hardness tester, hardness comparison plate, test block, calibration and adjustment plate -Manufacturer: SiB, hardness reference block test block -Type: 199HBW 5/750 -Dimension box: 180/170/H35 mm -Weight: 1.4 kg Nwodjk Egkwopfx Af Uoi

Condition: good (used), Force measuring device, force measuring instrument, calibration, force measurement technology, load cell, tensile force measuring bearing, force sensor, tensile and compressive force sensor -Manufacturer: Lorenz, 4 pieces tension and compression force sensor with Durbal, rod end spherical bearing -Sensor: Lorenz Type K-12 -Measuring range: - 100 kN -Sensitivity: 1.000mV/V / 0.999mV/V / 1.001mV/V -Swivel bearing: Durbal EF 35-20-501 -Dimensions of the articulated rod: 445 to 530 x 81 x 65 mm Nodpfx Afeg Sxyvo Ujwi -Fork head: Bore Ø 35 mm -Number: 3 boxes available, sensitivity as shown in photos -Price: per box -Box dimensions: 590/390/H200 mm -Weight: 30.2 kg/box

Condition: used, Year of construction: 1999, Measuring machine, coordinate measuring machine, form tester -Handover: in current condition as viewed -Calculator missing, x-axis damaged (Carriage guide defective) -Manufacturer:Mahr, form tester type MMQ 40 -Measuring height: 490 mm Njdpfx Afsua Nl Es Uowi -Technical data: see photos documentation -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Dimensions: 700/450/H900 mm -Total weight: 218 kg

Condition: used, Year of construction: 1998, Measuring machine, coordinate measuring machine, thread measuring machine, master scanner -Handover: in its current condition as inspected -Status: without control Nwedpfx Ajqpl Srsf Uji -Manufacturer: IAC, Master Scanner measuring machine -Type: MSXP 60x25 -Accessories: incl. calibration and measuring accessories / technical documentation, see photos -Transport dimensions: 900/400/H700 mm -Total weight: 159 kg

Condition: used, machine/vehicle number: 0901666, Force measuring device, force measuring device, calibration, force measuring technology, load cell, tensile force bearing -Manufacturer: ASA-RT Nwsdsfmm Dfopfx Af Uei -Product: Force measuring bearing type ATB-RP030/600 -Dimensions: 80/65/H20 mm -Weight: 0.6 kg

Condition: used, Year of construction: 2001, Year of manufacture: 2001 1 unit 1 combined contact roller/sanding pad unit, with sanding belt grit adjustment and calibration device Steel contact roller (profiled) Automatically adjusting contact roller Electronically controlled segmented pressure bar in a compact design, element width 50 mm Program-controlled adjustment of the sanding pressure of individual segments Unit drive with electronic, wear-free brake 3-pole switchable drive motor 3.7/7.5/15 kW (Sanding belt speeds 4.5/9/18 m/s) Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm Machine complete with rubberized pressure rollers Nwjdpji Eu Aqsfx Af Uei Pneumatic sanding belt tensioning with integrated sanding belt edge alignment Terminal with 50 freely programmable sanding programs for fully automated machine control Belt feed rate of 4 and 8 m/min Price: €14,900 plus VAT

Condition: used, machine/vehicle number: 0901666, Force measuring device, force measuring device, calibration, force measuring technology, load cell -Manufacturer: Johann Rein -Type: 1Mp Nwsdpfocdcn Hex Af Uei -Dimensions: 190/290/H130 mm -Weight: 4.5 kg

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 540-02 painting robot, serial number IRB0540-02-0087 The ABB Robotics IRB 540-02 (serial number IRB0540-02-0087) is a specialized 6-axis painting robot designed for precision applications such as coating plastic parts, electronic components, and furniture. It is known for its excellent surface quality and high process repeatability. Technical specifications: • Payload: 5 kg handling capacity • Number of axes: 6 • Robot weight: Approx. 240 kg • Mounting options: Floor or overhead mounting • System integration: Uses the S4P robot controller as standard and can be equipped with precision paint dispensing systems. Key advantages of the series: • High finish quality: Specifically calibrated for water-based, solvent-based, and powder coating processes. • Low material consumption: By integrating paint regulators and color change valves, overspray and paint waste can be drastically reduced. • Flexibility: Offers a large working area and a compact design, making it possible to coat even complex 3D geometries evenly. Used item – normal signs of wear. "Sample photo. The actual product may vary." Nwodpfx Aezm Hmbof Uji Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify the delivery address.

Condition: good (used), weight of the machine ca. 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Nwodpfxezidz Us Af Uji Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 550 mm Table diameter: 260 mm Base circle diameter: 0–630 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 300 kg X-axis: 230 mm Y-axis: 370 mm Z-axis: 500 mm Max. workpiece diameter: 630 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 2000 kg Nwjdpfxjzidz Ie Af Uei X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: used, Year of construction: 2016, Year: 2016 Condition: very good Counter state: 10.4 mil Configuration: - 2 x Collators DSC 10/60 ( 20 bins ) - LUL - HM hand marry + ejaction unit - 1 x DMB 600 - stitching and folding unit - 1 x DBM 600T - face trimmer - 1 x long delivery Technical Specification - Duplo DSC 10/60 - Paper Size and Media - Minimum size: approx. 120 × 148 mm - Maximum size: approx. 350 × 500 mm - (up to 350 × 610 mm for some versions) - Paper weight: - standard: approx. 52–300 g/m² - coated paper: approx. 79–300 g/m² - Media types: loose sheets, folded sheets, cross-folded sheets Capacity and Performance - Bin capacity: approx. 60–65 mm per station - Collating speed: up to 9,000–10,000 sets/hour (depending on configuration) - Inline production speed: approx. 4,000–5,000 booklets/hour Feeding and Transport System - vacuum belt feeding with air separation (Air Management System) - Error detection: double sheet detection, missing sheet detection, paper jam detection - Additional features: automatic calibration for different paper types Technical Specification - Duplo DBM-600 / DBM-600T (Stitching & Folding Unit – 600i Booklet System) - Paper Size and Media - Sheet size (min.): approx. 105 × 170 mm - Sheet size (max.): approx. 356 × 508 mm - (up to 230 × 610 mm for long sheets) - Supported formats: - A4, A3, B4, B5, Letter, Legal (various orientations) Capacity and Performance - Production speed: up to 5,200 booklets/hour - 2-up production speed: up to 9,000 booklets/hour (with trimmer) - Folding capacity: up to 30 sheets (80 gsm) - Stitching capacity: up to 50 sheets (80 gsm) - (approx. 5 mm thickness, depending on paper) - Maximum booklet thickness: approx. 6 mm (≈120 pages) Stitching System Nwsdpfx Aszblbhjf Uoi - Number of heads: 2 standard (optional 4 stitching heads – not included) - Stitch types: saddle stitching, side stitching, corner stitching - stitch & fold / fold only - Stitch head type: Hohner 43/6S - Stitch distance (1-up): approx. 60–320 mm Booklet Formats - Finished booklet size (1-up): - max: approx. 350 × 254 mm - min: approx. 120 × 75 mm - Untrimmed booklet size: - max: approx. 356 × 254 mm Trimming Unit - Duplo DBM-600T - Face trimming (standard): - adjustable trim range - head & foot trimming - 2-up processing capability - trim range: approx. 2–60 mm Folding System - Type: automatic roller folding system - Adjustment: fine tuning from approx. 0.1 mm Control and Automation - Control system: PC-controlled interface - graphical user interface (GUI) - Automation features: fully automatic setup, job memory and recall - quick changeover between jobs Electrical and Physical Data - Power supply: 220–240 V, 50/60 Hz - Power consumption: - DBM-600: approx. 465 W - DBM-600T: approx. 645 W - Dimensions (DBM-600): approx. 1848 × 929 × 1227 mm - Weight (DBM-600): approx. 377 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking Nsdszh Rufjpfx Af Ujwi - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2026, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 3,100 rpm, rotational speed (min.): 700 rpm, total width: 1,487 mm, total length: 4,440 mm, total height: 2,793 mm, throat depth: 1,490 mm, overall weight: 1,900 kg, Equipment: CE marking, documentation/manual, NEW | YEAR 2026 | CE CERTIFIED | MADE IN POLAND | EXW €38,000 + VAT WHY THE PRIAM The Priam is a vertical, electronically controlled glass drilling machine that does most of the work for the operator. The entire feed is electronically controlled — drilling is smooth and repeatable. The operator's role is minimal. After mounting the hole saws, they press the "Calibration" button — the machine measures the length of both drills (front and rear) and their diameter, then automatically assigns the correct spindle speed. After every drill change, the machine will not start drilling until calibration is done — setup errors are impossible. The hole position on the vertical axis is entered on the monitor and the support bar travels there automatically (up to 1,060 mm below the spindle axis); horizontally, the glass is positioned against 6 stops. The machine does the rest: the pneumatic clamp measures the glass thickness, the rear spindle pre-drills to a depth calculated by the controller, and the front spindle completes the hole from the other side — chip-free, clean edges at the first attempt. Optional: double-sided chamfering (hole saw with chamfering ring), tapered holes, and pulse drilling mode for laminated (VSG) glass. BUILT FOR SERIAL PRODUCTION Up to 20 holes on the vertical axis can be programmed — the operator enters the dimensions once and the machine drills them automatically. In serial production (shower enclosures, balustrades) the following panes are drilled without re-entering positions. Drilling at position 0 on the support bar allows holes on the glass edge (half-moon cut-outs). Performance: a Ø 75 mm hole in 4 mm glass in approx. 25–30 s (feed in glass approx. 1 mm/s, speed set by the operator). Recommended: thin-wall, self-sharpening hole saws (e.g. Champion, L=75 mm). TECHNICAL DATA Drilling diameter range: Ø 5–80 mm (both drills same diameter) Glass thickness: 2–20 mm Max. pane size: 2,000 × 4,000 mm, up to 200 kg Support bar travel: up to 1,060 mm below spindle axis Holes on the glass edge (half-moon): yes, position 0 Drilling program: up to 20 holes on the vertical axis Spindle speed: adjustable 700–2,800 RPM, assigned automatically after calibration Feed: automatic, electronically controlled Cooling: closed water circuit, approx. 30 l Compressed air: 6 bar (pneumatic clamping) Power supply: 400 V / 16 A / 4 kW Machine dimensions (L × W × H): 4,440 × 1,487 × 2,793 mm Weight: 1,900 kg Nwjdpfxjh Ek H Ss Af Usi Scope of delivery: CE marking, documentation, operating manual MANUFACTURER, SERVICE, TERMS EXPOGLASS is a Polish manufacturer of glass processing machinery — built at our own factory in Nysa (in-house welding shop and powder coating). Service with online support; spare and wear parts available from stock. Delivery and commissioning across the EU, operator training on site. Delivery time: approx. 8 weeks. Warranty: 12 months. Visit our factory and see the Priam drill your own glass samples before you buy — video of the machine in operation in this listing. Glasstec 2026, Düsseldorf, 20–23 October, Hall 12, Stand 12A72.

Condition: used, Year of construction: 2006, functionality: fully functional, grinding width: 900 mm, For sale are professional, wide-belt wet grinding machines, BÜTFERING PROFI SPW 409 RTTR (SteelMaster Prima), designed for grinding the surfaces of stainless steel, aluminum, and other metals after laser cutting. The machine is in good technical condition and fully functional, but 2 out of the 4 grinding stations require calibration or repair, as they are currently grinding with insufficient accuracy. Two stations are operating accurately. Nwodpfx Aezkh Stof Usi The machine is connected and ready for inspection and testing. Technical specifications: Manufacturer: BÜTFERING Model: PROFI SPW 409 RTTR / SteelMaster Prima Year of manufacture: 2006 Made in: Germany Number of stations: 4 Power supply: 400 V / 50 Hz Required air pressure: 8 bar Grinding width: 900 mm Equipment: 4 grinding stations Touch screen control panel Wet grinding system Conveyor belt Adjustable feed rate Industrial cooling system Ideally suited for: Stainless steel products Aluminum products Sheet metal processing companies Metal surface preparation prior to painting Removal of slag after laser or plasma cutting Surface grinding and satin (No. 4) finishing. If you have any further questions, please do not hesitate to ask.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: P260713253, 𝘼𝙪𝙩𝙤𝙢𝙖𝙩𝙞𝙘 𝘿𝙤𝙪𝙗𝙡𝙚-𝙀𝙣𝙙 𝙋𝙧𝙤𝙛𝙞𝙡𝙞𝙣𝙜 𝙇𝙞𝙣𝙚 𝙛𝙤𝙧 𝙋𝙖𝙧𝙦𝙪𝙚𝙩 𝙁𝙡𝙤𝙤𝙧𝙞𝙣𝙜 1. 𝗚𝗲𝗻𝗲𝗿𝗮𝗹 𝗜𝗻𝗳𝗼𝗿𝗺𝗮𝘁𝗶𝗼𝗻 • HOMAG OPTIMAT FRP225/7/10PL/L – Longitudinal Profiling Machine • HOMAG OPTIMAT FRP226/5/5PL/Q – Cross Profiling Machine Automatic, high-speed double-end profiling line designed for the production of solid wood, engineered wood, and laminate flooring. The line performs precision machining on all four edges, including tongue-and-groove and click-locking profiles. 2. 𝗠𝗮𝘁𝗲𝗿𝗶𝗮𝗹𝘀 𝗣𝗿𝗼𝗰𝗲𝘀𝘀𝗲𝗱 • Solid hardwood flooring • Engineered wood flooring • Laminate flooring • Multi-layer parquet • Decorative flooring panels 3. 𝗠𝗮𝗶𝗻 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗦𝗽𝗲𝗰𝗶𝗳𝗶𝗰𝗮𝘁𝗶𝗼𝗻 Parameter Specification Machine Type Double-End Tenoner / Profiling Line Longitudinal Machine HOMAG FRP225 Cross Machine HOMAG FRP226 Maximum Feed Speed Up to 80 m/min Working Principle Continuous automatic feed Number of Working Units 7 (FRP225) + 5 (FRP226) Total Working Units 12 Production Mode Continuous 4. 𝗪𝗼𝗿𝗸𝗽𝗶𝗲𝗰𝗲 𝗖𝗮𝗽𝗮𝗰𝗶𝘁𝘆 Parameter Typical Range Thickness 5–25 mm Nwodpfx Afjzmrw Ss Uei Width Customer-specific configuration Length Customer-specific configuration 5. 𝗠𝗮𝗰𝗵𝗶𝗻𝗶𝗻𝗴 𝗢𝗽𝗲𝗿𝗮𝘁𝗶𝗼𝗻𝘀 The line is capable of performing: • Longitudinal profiling • Cross-end profiling • Tongue machining • Groove machining • Click profile machining (depending on tooling) • Micro-bevel production • Relief grooves • Edge trimming • Sizing and calibration • Four-side profiling 6. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝗳𝗶𝗴𝘂𝗿𝗮𝘁𝗶𝗼𝗻 HOMAG FRP225 Function • Longitudinal edge profiling Configuration • Six machining units • High-frequency spindle motors • Precision side guides • Automatic pressure system • Heavy-duty chain conveyor HOMAG FRP226 Function • Cross-end profiling Configuration • Four machining units • Automatic synchronization with FRP225 • Precision positioning system • High-speed transfer conveyor 7. 𝗗𝗿𝗶𝘃𝗲 𝗦𝘆𝘀𝘁𝗲𝗺 • High-frequency spindle motors • Variable-speed feed drive • Precision chain transport system • Pneumatic pressure rollers • Servo-controlled positioning (depending on machine version) 8. 𝗧𝗼𝗼𝗹𝗶𝗻𝗴 • Leitz • Leuco • Kanefusa • AKE • Tigra Typical tooling: • Profile cutters • Grooving cutters • Chamfer cutters • Relief cutters • Diamond tooling (PCD) 9. 𝗠𝗮𝗰𝗵𝗶𝗻𝗲 𝗖𝗼𝗻𝘁𝗿𝗼𝗹 • Siemens PLC control system • Frequency-controlled spindle drives • Digital machine diagnostics • Electronic feed speed adjustment 10. 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗣𝗲𝗿𝗳𝗼𝗿𝗺𝗮𝗻𝗰𝗲 Parameter Typical Value Feed Speed Up to 80 m/min Production Capacity Approximately 1,500–4,000 m² per shift* 11. 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗣𝗿𝗼𝗱𝘂𝗰𝘁𝗶𝗼𝗻 𝗟𝗶𝗻𝗲 𝗟𝗮𝘆𝗼𝘂𝘁 1. Automatic infeed system 2. HOMAG FRP225 longitudinal profiler 3. Automatic transfer section 4. HOMAG FRP226 cross profiler 5. Inspection station 6. Automatic stacker 12. 𝗠𝗮𝗶𝗻 𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 • High dimensional accuracy • Excellent profile repeatability • High production speed • Fast tooling changeover • Continuous automatic operation • Suitable for traditional tongue-and-groove and modern click systems • Reliable industrial design for high-volume production 𝗧𝘆𝗽𝗶𝗰𝗮𝗹 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻𝘀 • Solid parquet flooring • Engineered flooring • Laminate flooring • Luxury wood flooring • High-precision click flooring systems

Condition: new, Year of construction: 2026, VERSION with the most powerful engine with a total power of S6: 2.6kW. A more powerful engine means stable operation and easy processing of hard materials: Hardwood requires more force for processing. A powerful engine will handle this without a problem. The latest version of the machine with an innovative tabletop opening system: Competitive old-type machines have "butterfly" tabletops. Before each start of work, the feed table and the receiving table should be calibrated with each other. Even small differences between them lead to damage in the material, giving undesirable effects. The new solution of connected tabletops allows for precise adjustment of both tables at the same time! Thanks to this, once set, the tables are permanently calibrated. When changing the planing height, both tables move simultaneously. Such a solution not only saves time, makes work with the machine more convenient, but also increases the precision of planing by 30% compared to the old solution. This is very important, especially when working with thinner materials. Trouble-free change from a planer to a thicknesser. The transition from planer to thicknesser is very quick and easy. It consists of unlocking the eccentrics and lifting the tables and moving the chip extraction cover. Work precision. Smooth height adjustment of the tops with a scale. The thicknesser table mounted centrally on the column has a knob for adjusting the setting up and down Aluminum swinging ruler (700x150 mm) with a scale strip allowing for precise setting at an angle in the range of 90-45 degrees. Technical parameters Knife shaft diameter 75 mm Knife shaft speed 4000 rpm Suction nozzle diameter 100 mm Swing ruler tilt angle 90–45° Number of knives 3 Shaft length 250 mm Knife dimensions 250x30x3 mm Nwodpfx Ajvxh A Ssf Uoi Maximum planer width 250 mm Maximum thicknesser width 250 mm Maximum planing height 180 mm Maximum thicknesser cutting depth 3 mm Maximum planer cutting depth 2.5 mm Thicknesser feed speed 6 m/min Fence size 700 x 150 mm Machine dimensions (length x width) 1080 x 269 mm Weight 175 kg Total engine power S1: 2.2 kW S6: 2.6 kW Power supply 400V

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Applications Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Operating manual (DTR) Nedpfexy Hy Usx Af Ujwi CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Manual (DTR): Polish/ English CE declaration: yes

Condition: excellent (used), Catalog number 8036 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: – from above: Nwodpjzin Sdefx Af Uoi rubber roller, pressure roller, knurled 1) metal roller, knurled, for calibrating rubber roller, pressure roller 2) rubber roller, knurled + sequential shoe + metal roller rubber roller, pressure roller total power of units 15kW -from below: 2 rubber rollers, slip rollers conveyor belt 2 rubber rollers, slip rollers grinding thickness potentiometer belt blowing system pneumatic belt oscillation controlled by photoelectric sensors electric table lifting + manual (for precise adjustment) 2 feed speed types 0.3kW with pneumatic brake working pressure 6-8bar diameter of dust extraction nozzle 2x140mm overall dimensions L/W/H 1840x1650x2000mm weight 1160kg – unpainted – made in Italy – automatic shoe – 2 units – grinding thickness potentiometer – DTR documentation – used grinder, very good condition Net price: 48900 PLN Net price: 11640 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: used, operating hours: 13,848 h, machine/vehicle number: SO139, Used MRT 3503 R Rotational Molding MachineTechnical Specifications & Performance DataThe MRT 3503 R is a heavy-duty industrial forming system engineered for high-temperature plastic processing and container manufacturing. Its robust structure and precise motion control make it suitable for demanding production environments in industrial packaging and beverage production support, including integration upstream of filling and labeling equipment within a used bottling line or second hand production setup. The machine combines large-format capacity with controlled rotation on multiple axes to deliver consistent, repeatable forming quality.Model: MRT 3503 RSpherical diameter: 3500 mmMachine length: 14960 mmMachine width: 13026 mmMachine height: 5480 mmCarriages: 3Straight arm: 1Maximum load (straight arm): 2000 kgSecondary axis diameter (straight arm): 3250 mmOffset arm: AvailableMaximum load (offset arm): 1550 kgSecondary axis diameter (offset arm): 2900 mmPrimary axis revolutions: 0–8 rpmSecondary axis revolutions: 0–8 rpmBurner brand/model: WEISHAUPT WM-G10/2 A exec. ZM-LNDigital burner power (max): 630 kWBurner calibration power: 550 kWMaximum operating temperature: 300°CAlarm temperature: 340°CFuel type: Natural gas methaneAverage fuel consumption (continuous cycle):46 m³/hInstalled electrical power: 42 kWVoltage/Frequency: 400 V / 50 HzAverage electricity consumption (continuous cycle): 30–35 kW/hCompressed air: 2 lines, 6 bar max; 32000 Nl/hWater pressure: 2 barWater consumption (max): 4–6 l/minStructure finish: RAL 5002 / RAL 3020; Protections RAL 1023Arm surface finish: High-temperature silverAdvanced Automation & Control SystemsThe MRT 3503 R features precise rotational control with independently adjustable primary and secondary axes from 0 to 8 rpm for accurate thermal forming profiles. A digital WEISHAUPT burner package enables stable process temperatures up to 300°C, with an alarm setpoint at 340°C for enhanced protection. Electrical integration is standardized at 400 V, 50 Hz with 42 kW installed power for auxiliary systems. Operator safety is supported by guarded enclosures and compliance certification, while color-coded protections aid visual management. The controlled heating, rotation, and timing provide consistent part quality and predictable cycle times in industrial packaging applications.Production Line Integration CapabilitiesThis machine can operate as a standalone forming cell or be integra... Nwsdeziyy Hepfx Af Uoi

Condition: like new (used), functionality: fully functional, Roller shutter - extrusion die set Nwsdpfx Afjxgpbbs Uoi - complete, die head with heating element and calibration tool * die connection currently for Weber CE7 but other mounts available on request - double strand 2x 5m/min - roller shutter cover width 52mm - fully retracted - includes mounting plate (as shown) to fit on calibration table

Condition: used, Year of construction: 2024, New machine – special price – year of manufacture 2024. HAND GUARD Edition Single Flex, unit. Image included. The HAND GUARD system is based on the early detection of a hazardous situation and thus protects the user from injuries. It functions in every camera-based system and initially warns the user visually to indicate an impending danger. If the danger persists, the saw blade is lowered without damaging the machine or the material. HAND GUARD supports the processing of various materials, such as wood, metal, and plastic. • Contactless and injury-free • Quick start-up • 100% damage-free • Works with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter, fully retractable under a single-sided pivoting saw unit. Pivoting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and pivoting adjustment and a maximum saw blade overhang of 179 mm. (Partial installation of the scoring unit required). In addition, there is the control unit at eye level, with which you can adjust the height and pivoting of the saw blade, plus, depending on the choice of the control package, the speed and other functions. The new, clear industrial design marks the exceptional position of the Altendorf brand: In this panel saw, distinctive design meets timeless aesthetics. The Altendorf double carriage is famous for its smooth running and precise movement. It can be locked steplessly at any position. The large double rollers keep the upper carriage in absolute connection with the lower carriage in the respective guide rods. This running quality is maintained even under decades of stress and contamination. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm, which provides helpful support when cutting long workpieces on the parallel fence. Positionable 90° under the double carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction on the parallel and mitre fence when pivoting the saw unit • Stepless fine adjustment of the axes via +/# buttons • Easy calibration of the axis • Machine diagnostics, operating hour counter, USB interface • Calling up the last dimension input (back function) • Conversion from peak to butt dimension on the parallel and mitre fence Nwsdpfeyyap Ejx Af Uji • Shift-cut function with automatic determination of missing angles or dimensions • Extended tool management for max. 100 storable tools • Storage of the scoring position (3-axis scoring unit) • Storage of the thickness and cutting width of the main tool • Storage of the speed of the main tool Additional functions: • Grooving: with automatic step-by-step positioning of the parallel fence • Chain dimension function: cutting sequences with the same distance on the parallel fence • Miter cut with allowance • Calculator function with result transfer to the axes • Geometric shapes, determination of missing angles or dimensions • Bevel cuts, determination of missing angles or dimensions • 9999 storable cutting programs • Standard preparation for remote maintenance • Template holder directly next to the touchscreen Accessories included in the Edition Single Flex: • Double carriage with a carriage length of 3000 mm • Vario drive 5.5 kW (7.5 hp) VAR

Condition: ready for operation (used), Year of construction: 2004, number of axes: 6, Welding robot manufactured in 2004. This ABB IRB 2400L Welding Cell features a robust design with a positioner model ABB IRB 500R and includes Fronius TPS 4000 welding equipment. It comes equipped with essential safety features such as a light curtain and safety fencing. If you are looking to get high-quality welding capabilities, consider the ABB IRB 2400L Welding Cell we have for sale. Contact us for further details. Nwedpfx Ajzhmryjf Uei - Industrial Robot Model: ABB IRB 2400L- Positioner Model: ABB IRB 500R- Welding Equipment: Fronius TPS 4000- Supply Voltage: 3x400V/PE/N- Cable Cross-section: 5 x 16 mm²- Fuse Protection: 63 A delayed- Compressed Air Requirements: 6 bar, G1/2"- Robot Control Cabinet: Included- Machine Sequence Control Cabinet: Included- Robot Base Height: 800 mm- Safety Equipment: Light curtain, safety fencing, glare protection partition wall, service door (monitored by ABB), rear access protection (mechanical, h=1100mm)- Maintenance Units: Torch cleaning system, TCP Calibration unit- Control Stations: Main start panel, Pre-Reset button- Footprint Dimensions: Approx. 8025 mm (length) x 5500 mm (width)- Center-to-center distance: 2000 mm x 1200 mm turning circle- Load capacity: 500 kg per side of the table / Maximum load difference: 350 kg- machine hours: 68.107h

Condition: excellent (used), Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50 Hz Rated power: 10 kW, Rated current: 21 A Sound pressure level at 1m distance (free-field measurement): < 69 dB (A) Side feed-through: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R-23 Weight: approx. 570 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: Nedpfx Aozg Tyzjf Uowi 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, KB Prüftechnik Hardness Testing Machine, Type: KB 750 BVRZ Machine Type: KB 750 1 kg - 750 kg UNIVERSAL DIGITAL KB universal hardness testing machines for automatic and standard-compliant hardness testing. Suitable for all hardness testing methods in the load range HV 0.2 1 - 3000 kgf, Vickers, Brinell, Rockwell, Super-Rockwell, Knoop (only HK 1), ball indentation hardness (plastics) and depth measurement according to Vickers and Brinell. Fully automatic testing sequence, evaluation of the indentations on the integrated LCD monitor using an integrated video camera and zoom lens guarantees the highest evaluation accuracy according to the standard. All hardness values are displayed digitally immediately. User-friendly and powerful control panel with a color LCD monitor, high contrast and glare-free. The measurement of the indentation is performed without parallax. The testing forces are electronically controlled and applied with the highest precision. The video image can optionally be output as a BMP file. All KB hardness testing machines are supplied with a basic equipment package that enables immediate operation with the ordered indenters. A selection of fixtures, testing tables, indenters, lenses, hardness comparison blocks, etc. is available. A connection to a PC or central computer is possible with all KB hardness testing machines. In conjunction with the fully automatic software and motorized cross table, the machine can be operated as a fully automatic system. fully automatic testing sequence optical evaluation via integrated video evaluation extremely user-friendly and powerful large LCD color display industrially designed foil keypad variable software adaptation Zoom lens 1:7 parallax-free measurement load cells, controlled load application, LED lighting Rockwell resolution 0.025 HRC extremely powerful 200 freely definable test programs Calibration machine accuracy (option) new LED ring light (option) Nedpfx Afszg Tyuj Uewi automatic image evaluation (option) 2 interfaces parallel + serial, as well as keyboard connection extended load range XL (option) freely switchable language selection German, English, French, Italian KB750 BVRZ: Test load 3-750 kgf Brinell ISO 6506 HB depth measurement Vickers ISO 6507 HV depth measurement Rockwell ISO 6508 Rockwell ISO 6508 Superrockwell Testing table ∅80 mm Motor zoom 1:7 Lens 4x for HV10-HB5/750 NOT suitable for HV5 Operating function: Programmable digital panel with the following functions: Measurement of the hardness indentation on the LCD display, with adjustable measuring marks, without parallax Logically structured, simple operating guidance Any number of test programs can be created and stored (200) Automatic force selection by selecting the testing method Freely selectable application times of the testing forces Freely selectable dwell times of the testing forces Online help Automatic correction for curved surfaces according to DIN EN ISO Control of the fully automatic testing sequence Direct, digital hardness value display Tolerance display Conversions according to DIN 50150 Table B1 Protocol generation in DIN A4 format with standard printer via parallel interface Serial interface for data output to PC Optional network 4 languages: German-English-French-Italian Statistics functions, such as: Number of tests Min / Max Average Range Standard deviation cp / cpk Histogram (Changes and errors in the technical data are subject to change!)

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Nodpfezg Tx Rsx Af Ujwi Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.