Used Can Press for sale (27,040)

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Gtodpfx Agox Sxuko Tjt Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2024, Exhibition machine Garbsen, new, complete in standard configuration with: - Sturdy, torsion-free steel frame, welded and bolted construction - Upper lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams featuring proven tolerance compensation system (System Ganner) for tightly pressed carcass joints - Counterpressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support panels Gtodpfx Agjx Twc Ae Tet - Continuous pressing surface height of 95 mm on the lower vertical press beam - Electromotive adjustment of both press beams via precision trapezoidal spindle screws (with increased pitch and concentricity accuracy) and high-performance recirculating nuts with grease reservoir - Pressing is carried out electromotively, by 2 separate helical geared motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable using two potentiometers and regulated via frequency converters; the pressing force control is therefore absolutely wear-free - Pressing force for the horizontal press beam: min. 500 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing force for the vertical press beam: min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second - Extremely simple operation via 6 separate push buttons, 8 movement processes can be selected via the control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: length min: 150 mm, max: 2500 mm; height min: 150 mm, max: 1400 mm; depth: 700 mm - Electrical connection: 400V, 3Ph, 50Hz (3.2 kW, 16 A) - Weight: 2100 kg (net) - Dimensions: 3500x1200x2300 mm (L x W x H) Image includes special accessories: machine feet. Surcharge for rapid traverse speed per unit for fast positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be deactivated for pressing special components. Set of machine feet for working height 500 mm per unit. Location: Garbsen

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Cone G25_neu, Electric press brake G25 with spindle drive CoastOne - Made in Finland New machine Pressing force: 104t Bending length: 2600mm Gsdpsx Tg Alsfx Ag Tjtt Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h Gtodpfxox A U Nco Ag Tot bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), functionality: fully functional, Year of construction: 2011, control type: CNC control, bending force (max.): 66 t, working width: 2,040 mm, stroke length: 200 mm, distance between stands: 2,364 mm, Delem CNC control controlled arrester tools Technische Daten / technical details: Druck / pressure 66 to Abkantlänge / bending length 2040 mm Durchgang zwischen den Ständern / distance between columns 2364 mm Hub (Y-Achse) / stroke (Y-axis) 200 mm Verfahrweg X-Achse / travel of X-axis 600 mm Gjdpfxsx Tgmks Ag Tstt Verfahrweg R-Achse / travel of R-axis 150 mm Gewicht / weight 5700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1972, Pressure 800 t distance between columns 3250 mm stroke 1100 mm Gtsdpfjvuuhyox Ag Tot Distance table/ram, stroke up 1900 mm Table surface area 3100 x 1900 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 300 mm Die cushion area in table 2500 x 1800 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 200 mm Die cushion area in ram 2200 x 1000 mm Ram surface 3100 x 1900 mm Side window 900 mm Oil volume 4700 l Power capacity 200,0 kW Dimensions (WxDxH) 4,95 x 3,3 x 10,2 m Height above floor 7,05 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition - Video at seller’s site before dismantling available

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Gsdpfxjx Sw Sue Ag Tott

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Gtsdpfjx Twb Sex Ag Tet

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Cone G30_neu, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G30 Pressing force: 1250 kN Bending spindles: 5 Servo motor power: 5 kW Biegelaenge max: 3100 mm Gjdpex Tgz Uefx Ag Tstt Free Maschinenstaenderdurchgang: 3200 mm Frame Width: 4014 mm Frame height: 2950 mm Frame depth: 1970 mm Frame Type: O-frame Table height: 1000 mm Machine weight: 6000 kg Mounting height: 600 mm Y-axis, bending stroke: 280 mm Y-axis, Repeatability: +/- 0.002 mm Y-axis, bending speed: 10 mm / s Y-axis, Anna marriage approach speed: 100 mm / s Y-axis, Rueckzugsgeschwindigkeit: 100 mm / s X axis. Speed: 500 mm / s X-axis Repeatability: +/- 0.025 mm X-axis stroke: 600 mm X-axis, max. Duration: 800 mm Delta X-axis, speed: 100 mm / s Delta X-axis Repeatability: +/- 0.025 mm Delta X-axis travel: +/- 50mm R-axis, speed: 100 mm / s R-axis Repeatability: +/- 0.05mm R-axis stroke: 200 mm Z-axes, Geschwidnigkeit: 2500 mm / s Z axes Repeatability: +/- 0.5 mm Z axes, traverse: 100 - 3000 mm

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm Gtedpfx Agox S H Uxj Tot - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Gtodpfevtpq Hox Ag Tst Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 2005, Pressure 1000 t distance between columns 4100 mm stroke 1200 mm Distance table/ram, stroke up 2100 mm Table surface area 4000 x 2200 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm Die cushion area in table 3500 x 1600 mm Die cushion pressure in ram 100 t Die cushion stroke in ram 160 mm Die cushion area in ram 3250 x 1600 mm Ram surface 4000 x 2200 mm Side window 1300 mm Oil volume 8000 l Power capacity 300,0 kW Dimensions (WxDxH) 5,75 x 4,3 x 9,55 m Height above floor 7,7 m Gtsdpfxjvuubgj Ag Tot year of manufacture 1973 - modernization 2005 with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram, hydraulic cutting impact cushioning stored in dismantled condition Video at seller’s site before dismantling available

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed Godpfxeulwzme Ag Tott 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Bull12_2026, Electric press brake Bull12 with spindle drive CoastOne - Made in Finland New machine Pressing force: 100t Bending length: 1300mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system Gtodpsx Tgzzsfx Ag Tst - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: used, Year of construction: 1973, Pressure 1600 t distance between columns 4100 mm slide stroke 1450 mm Distance table/ram, stroke up 2750 mm distance table/blank holder, stroke up 2200 Table surface area 4000 x 2200 mm ram pressure 1000 t Pressure of blank holder 600 t stroke of blankholder 1000 mm blank holder surface 4050 x 2200 mm Ram surface 3200 x 1650 mm pressure of drawing cushion in table 360 t Die cushion stroke in table 300 mm die cushion area 3500 x 1600 mm Side window 1100 mm Oil volume 9000 l Power capacity 390,0 kW Weight 250,0 t Dimensions (WxDxH) 5,95 x 4,3 x 10,5 m Height above floor 8,6 m with oil-hydraulic drive, hydraulic controlled drawing cushion in table and ram Gtjdpfevut Ifsx Ag Tet stored in dismantled condition - Video at seller’s site before dismantling available

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: G30_2026, Electric press brake G30 with spindle drive CoastOne - Made in Finland New machine Pressing force: 130t Bending length: 3100mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: Godpfox Tgzujx Ag Tett - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls Gtsdpfx Aevut Dyjg Tjt - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: G40_2026, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G40 Pressing force: 1500 kN Bending spindles: 6 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard Cbgdzvzgpj - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table Gjdpox Tgy Dofx Ag Tott - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation

Condition: used, Year of construction: 2004, Pressure 630 t stroke 800 mm distance between columns 2600 mm Distance table/ram, max. stroke up, adjustment up 1500 mm Table surface area 2500 x 1300 mm pressure of drawing cushion in table 300 t Gedpfx Aev Svarog Tott Die cushion stroke in table 300 mm Ram surface 2500 x 1300 mm Side window 1040 mm feed down 600 mm/s feed up 360 mm/s working feed 14 - 42 mm/s power requirement 145,0 kW Weight 85,0 t dimensions (WxDxH) 4,2 x 4,0 x 7,8 m height over floor 6,80 m height beneath floor 1,0 m Demonstration machine from technical university with approx. 920 operating hours! Mint condition! permitted for manual loading according to the CE-norm with oil-hydraulic drive, controllable dependent on pressure/time and way, upper and lower stroke limitation, light-guard (Sick) on front and back, hydraulic drawing cushion in table with ejector function, hydraulic cutting impact cushioning, mechanical depth stop via 4 motor-adjustable spindles, hydraulic ram interlocking, two-hand operation 2 tool changing consoles, 4 hydraulic ball roller tracks, 4 dampening elements

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Bull15_2026, Electric press brake Bull15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 150t Bending length: 1600mm Gtodpfxex Tgyqs Ag Tjt Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: used, Year of construction: 2000, pressure 16 t throat 350 mm stroke 25 mm no. of strokes 200 - 1000 /min distance table/ram, max. stroke up, adjustment up 230 mm table surface area 480 x 280 mm Table height above floor 1050 mm ram surface 200 x 110 mm ram adjustment 25 mm diameter of blanks - 1800 mm no. of flutes 16 - 460 material thickness 2,0 mm distance between mid parts spindle and mid ram 160 - 680 mm power requirement 6,0 kW Weight 5,60 t dimensions of the machine (WxDxH) 1,4 x 2,9 x 2,4 m year of manufacture 1971 - new control 2000 with infinitely variable AC-drive, pneumatic clutch (Ortlinghaus), manual ram adjustment, electro-pneumatic blank clamping, automatic stripping device, intermittent control (ram lifting for idle stroke), fully automated centralized oil lubrication, two-hand operation, electrical control Siemens S 7 (yom 2000) various change wheels Gsdpjw U Ekvefx Ag Tstt

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: C15_2026, Electric press brake C15 with spindle drive CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1600mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system Gedpsx Tgx Tefx Ag Tstt - 2 sheet followers 36 months warranty after installation

Condition: new, Year of construction: 2026, machine/vehicle number: G20_2026, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G20 Pressing force: 600 kN Bending spindles: 3 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system Gedpfx Aox Tgxyeg Tett - 2x bending aids 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: C12_2026, Electric press brake C12 with spindle drive Gtodjx Tgxgepfx Ag Tot CoastOne - Made in Finland New machine Pressing force: 52t Bending length: 1300mm Controlled axes: X-R axis (2x manual stop fingers) Standard type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touchscreen Optional: - 4 or 5-axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS + light barrier system angle measuring system - extra screen with 3D bending software - support table - Front and rear lights - WILA / Trumpf / Type B - tool holder system - 2 sheet followers 36 months warranty after installation

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: Cone G25_2026, control type: NC control, degree of automation: manual, actuation type: electric, controller manufacturer: CoastOne, controller model: Touchscreen 15", bending force (max.): 80 t, working width: 2,600 mm, type of crowning: CNC-controlled, warranty duration: 36 months, Equipment: CE marking, angle measuring system, angle stop, documentation/manual, emergency stop, european tool clamping system, finger protection, lower tooling, safety light barrier, upper tooling, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G25 Pressing force: 800 kN Bending spindles: 4 Controlled axes: X-R axis (2x manual stop fingers) Gtodpfx Agsx Tgw Aj Tot Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids 36 months warranty after installation