Used Carousel Lathe for sale (5,489)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 250 mm, turning diameter: 210 mm, spindle bore: 100 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 1,355 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 370 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 18 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,675 mm, total length: 4,400 mm, total width: 2,100 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, overall weight: 5,000 kg, We offer this very good Biglia BV 210 CNC vertical lathe, year of construction 2005. Gedpfxozbdgce Ahnobn If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Gsdpfxjwcfgbo Ahnobn Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gbedpfxsrtrlzs Ahnon Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Gbjdpfxjw Iqumj Ahnen Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons Godpfx Ahjv Nw Npenjbn

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Gjdpewwarusfx Ahnebn Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm Godpevzln Refx Ahnebn spindle taper A2-11 number of spindle speeds 2000rpm engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm Gjdpfx Ahjzb Ipzenjbn 1750 mm between centres Coolant pump and tank

Condition: good (used), Year of construction: 2006, 510mm swing, 320mm max. machining diameter, 525mm max turned length, Gsdpfxezcwz No Ahnsbn 4000rpm spindle, 65mm bar capacity, 12 station turret, 15W spindle motor, FANUC Oi control, collet chuck, Tool setter Tailstock, Parts Catcher, Swarf Conveyor, Coolant

Condition: used, turning diameter over bed slide: 1,000 mm, turning length: 6,500 mm, Swift Heavy Duty Long Bed Lathe Swing Over Bed: 1000mm Gbodpfx Aszbx A Sshnjn Distance Between Centres: 6500mm Spindle Speeds: 7.5 – 450 RPM Machine With: 800mm 4 Jaw Chuck Fixed Roller Steady 400mm Dia Travelling Steady Rapid Traverse To Saddle Digital Readout

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Gsdjzbhc Ijpfx Ahnobn Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: good (used), Year of construction: 2006, CAZENEUVE OPTICA 360 CNC - NUM - 2006* *CNC training/production lathe – Very recent for an Optica – CE marked* *1. Identification* Make: CAZENEUVE S.A. - Pont-Évêque Model: OPTICA 360 Serial Number: 5055 Year: 2006 - CE Marking Control: NUM Distance between centers: 750 mm Spindle bore: Ø 54 mm Gjdpfx Ajzc Ul Sshnjbn *2. Why this 2006 model?* It is one of the last Optica 360 models produced. Therefore: 1. *NUM Control*: Reliable, parts and service are still provided by NUM. It is the standard in France. 2. *Year 2006*: Less wear, more modern electronics than models from the 90s. 3. *3 Cazeneuve modes*: Manual / Training / CNC. Ideal for a general mechanical workshop or vocational school. 4. *Robust*: Cast iron bed, 7.5 kW. You can switch from machining brass to pre-treated materials without any issues. *Condition*: Very clean for a 2006 machine. Original white/blue paint, no damage. Machine is on blocks, stored in a dry place. Can be seen powered on. *3. Technical Specifications* Characteristic | Value Ø over bed | 360 mm Ø over carriage | 200 mm Distance between centers | 750 mm Spindle bore | Ø 54 mm Spindle nose | A2-5 Spindle power | 7.5 kW Spindle speed | 50 to 3500 rpm Control | NUM 1020 / 1050 *Specify if you know which one* Weight | ~2300 kg *4. Included Equipment* - 3-jaw chuck Ø 200 - Rotating tailstock CM4 - Full splash guard with door safety interlock - Operator panel + NUM screen - Lighting - Cazeneuve technical documentation + NUM schematics - Basic tooling

Year of construction: 2006, condition: used, total length: 4,300 mm, total width: 2,100 mm, total height: 2,100 mm, Empty weight: 5.000 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Siemens - Power [kW]: 30.0 - Swing over bed [mm]: 350 - Distance between centres [mm]: 600 - Bed width [mm]: 210 - Spindle bore [mm]: 62 - Max. spindle speed [rpm]: 3500 - Options: Chip conveyor, Three-jaw chuck, Bar feeder, Live tools, C-axis - X-axis travel [mm]: 271 - Y-axis travel [mm]: 600 Gjdpfx Ahozc I Efensbn - Transport dimensions: 4300mm x 2100mm x 2100mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Brand : CMZ Model : TBI 520 MC Cnc : FANUC 18i-TB with Manual guide Yom : 2005 Times operation: 1371h Distance between centres: 1.100 mm Swing over bed: 520 mm Ø Max. Turning: 420 mm X Travel X : 296 mm Z Travel : 1090 mm Rapid Feeds (X, Z Axis): 18 m/min Rapid Feeds (Z Axis): 24 m/min Max Speed of the Head: 3000 rpm Spindle Bar Diameter: 82 mm Chuck Bore Ø: 95 mm Spindle Max. Power : 22 kw Number turret positions; 12 (VDI-50) Number positions of Driven tools 12 Driven Tools Speed 4000 rpm Max Power Driven Tools 8,5 kw C Axis and Driven Tools INCLUDED Hydraulic Steady Rest installation: INCLUDED Tool Presetter INCLUDED 2 Axial Driven Tool Holders INCLUDED 2 Radial Driven Tool Holders INCLUDED Installed Power 50 KVA Equipped with chip conveyor Gbjdpfxjzczaco Ahnen

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Tailstock Coolant tank and tray 6 tool holders Gbjdpfozakk Eex Ahnon

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing Gjdpfxszakgtj Ahnjbn 1000mm between centres 10 station turret Tailstock Coolant pump and tank Swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing Gsdpfxjzaix Ij Ahnebn 2000mm between centres 8 station turret Coolant pump and tank Swarf conveyor

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND Godpfjy H Hc Esx Ahnobn MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS OPERATOR SAFETY DOOR GOOD RANGE OF ACCESSORIES

Condition: good (used), Conventional lathe, Pinacho model ML 18-250, year 2019. Distance between centers: 1,500 mm, main spindle bore: 58 mm, chuck diameter: 250 mm, swing over bed: 502 mm, bed width: 300 mm, Fagor Innova digital readout. Gsdpfx Ahjzcxnwonobn

Condition: used, Year of construction: 1999, total length: 3,350 mm, total width: 1,550 mm, total height: 1,800 mm, Colour: White Empty weight: 3.300 kg In very good condition. In 2017 Refurbished for €32.000 Gbjdpfoy Ivx Esx Ahnsn - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: Teach-in - Control system brand: Monforts - Control system type: Monforts Control System MTC K - Power [kW]: 15.0 - Centre height [mm]: 250 - Swing over bed [mm]: 500 - Carriage turning diameter [mm]: 290 - Distance between centres [mm]: 1500 - Spindle bore [mm]: 70 - Min. spindle speed [rpm]: 2 - Max. spindle speed [rpm]: 2800 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3350mm x 1550mm x 1800mm (l x w x h) - Transport weight [kg]: 3300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), steady rest CNC Lathe VDF Wohlenberg - U1270 MACH-ID 9187 Make: VDF Wohlenberg Type: U1270 Length:1400mm Gbsdpfx Ahjzcn Srjnsn Width:800mm Height:1500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1970, spindle bore: 105 mm, turning diameter over bed slide: 1,600 mm, turning length: 8,000 mm, total length: 13,210 mm, total width: 2,420 mm, total height: 2,400 mm, bed width: 1,100 mm, rotational speed (max.): 224 rpm, overall weight: 33,000 kg, workpiece weight (max.): 25,000 kg, Centre lathe POREBA - TCC160 Gedpfozcm Rmox Ahnjbn MACH-ID 8822 Make: POREBA Type: TCC160 Year: 1970 Work load supported 2 steady 25.000 Kg Work load not supported 16000 Kg incl. 4 Chuck 1600 mm incl. 2 x Steady rest incl. internal grinding attachment incl. external grinding attachment incl. milling saddle support DBC Turning Length: 8000mm Swing over bed Ø: 1600mm Swing over cross slide Ø:1250mm Spindle bore: 105mm Spindle power: 55kW Bed width: 1100mm Tailstock spindle Ø: 220Ø Stroke pinole: 600mm Spindle taper: Metric 80Mk Speeds / ranges: 224Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 5000mm/min. Workpiece load: 25000 Length: 13210mm Width: 2420mm Height: 2400mm Weight: 33000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), turning length: 5,038 mm, spindle motor power: 80,000 W, spindle bore: 122 mm, travel distance X-axis: 490 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 5,038 mm, total height: 3,300 mm, total length: 16,000 mm, total width: 4,900 mm, overall weight: 30,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/5000 MACH-ID 9642 Make: HEYLIGENSTAEDT Type: Heynumat 35/5000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: +180 to -5038mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm Gsdozcmzxopfx Ahnjbn B-Axis power: 28kW Length: 16000mm Width: 4900mm Height: 3300mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2002, turning length: 6,000 mm, spindle bore: 122 mm, travel distance X-axis: 90 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 6,110 mm, rotational speed (max.): 2,200 rpm, total height: 3,300 mm, total length: 16,000 mm, total width: 5,300 mm, overall weight: 32,000 kg, Multi-tasking lathe HEYLIGENSTAEDT - Heynumat 35/6000 MACH-ID 9643 Make: HEYLIGENSTAEDT Type: Heynumat 35/6000 Control: SIEMENS 840D Max. turning Ø: 890mm X-Axis: -10 to +490mm Y-Axis: -130 to +300mm Z-Axis: -180 to +6110mm Spindle bore: 122mm Speedrange: 2200Rpm Spindle power: 80kW ATC / revolver: 100 B-Axis Toolsystem:Capto C8 Sandvik B-Axis Speedranges:2200Rpm B-Axis power: 28kW Gbjdpfx Ahszclqlenen Length: 16000mm Width: 5300mm Height: 3300mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, centre distance 2.000 mm turning diameter over bed 350 mm swing over plan sled 470 mm bed width 525 mm turning speeds 25 - 1.250 U/min power capacity 18 kW spindle bore 92 mm spindle head ISO 702-3 Gr. 15 diameter of quill 145 mm Inner cone of the quill MK 6 longitudinal feed 0,035 - mm/-1 face feed 0,009 - 8,0 mm/-1 metrical thread cutting 0,5 - 304 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. The guideways are in very good condition. Technical features & accessories: - various accessories Gbsdpfozczhmsx Ahnen Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale!