Used Carousel Lathe for sale (5,629)

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, Lathe – cycle-controlled | Brand: SEIGER | Type: SLZ 2000 Year of manufacture: 2011 The machine can be inspected by appointment. Condition: Fully functional / ready for operation. Operating hours (February 2026): approx. 15.289 h TECHNICAL DATA Working area: - Center distance: 4.000 mm - Swing diameter over bed rail: 2.000 mm - Swing diameter over cross slide guide: 1.400 mm - Cross slide travel: 760 mm - Bed width: 1.350 mm Turning tool: cross-section (height x width) 40 x 40 mm Turning spindle: - Spindle diameter in front bearing: 300 mm - Spindle bore: 120 mm Main drive AC: - Drive power 100% / 60% duty cycle: 54 / 70 kW - Max. torque at the spindle: approx. 18.000 Nm - Speed range: 3 - 450 rpm Tailstock: - Quill diameter: 320 mm Permissible workpiece masses: - Between centres without steady rest: 18 tons Weights: - Machine: 24 tons Space requirements/dimensions (Length x Widt x Height): - Machine without cladding: 10,5 x 4,2 x 2,8 m Electrical: - Supply voltage / rated frequency: 400 V, 50 Hz - Power consumption main drive: 54 kW EQUIPMENT / ACCESSORIES: - Control system: SINUMERIK 840D pl - 2 x chip conveyors - Documentation - CE marking Cedpfx Aeyq Rwtoftjgp No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: refurbished (used), Spindle bore diameter 250 mm Distance between points 6.000mm Height between points 600mm Diameter admitted on bench 1.200mm Cgsdog Rn U Ijpfx Aftep Diameter admitted on carriage 910mm Admitted diameter on neck 1,500mm Neck length 410mm Bench width 630mm Course transversal cart 670mm Course charriot superior 200mm Course counterpoint shaft 250mm Diameter axis tailstock 120mm

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Cgodeynky Aepfx Aftep Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: good (used), Year of construction: 1999, turning diameter over cross slide: 230 mm, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, quill stroke: 120 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 3,000 rpm, Swing diameter over bed: 400 mm Codeyn Dqzepfx Aftegp Swing diameter over cross slide: 230 mm Distance between centers: 1,000 mm Spindle bore: 50 mm Speed: 1–3,000 rpm Quick-change toolpost Three-jaw chuck Tailstock Quill travel: 120 mm Various tools (without cabinet) Dimensions LxWxH: 2400 x 1450 x 1900 mm

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Turning diameter over bed: 480 mm Cedpfewm D Ilsx Aftegp Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2011, functionality: fully functional, General Manufacturer: EMAG Codpfjyq Rwgsx Aftjgp Machine Type: VSC 400 (VSC 7 DSL) Description according to sales documentation: Vertical turning machine with associated Promot portal loader Year of manufacture (machine): 2011 Year of manufacture (loader): 2011 Application: The machine was used for finish turning of hardened bevel gears for passenger car axle drives Condition (as per documentation): technically in good condition consistent with its age Scope of supply EMAG VSC 7 Dsl vertical turning machine Promot portal loader Not included in the scope of supply All workpiece-contacting components Gripper jaws for the portal loader Shuttle supports on the part feed Clamping devices Tools Promot loader control system Type of current: 3~ Frequency: 50 Hz Operating voltage: 400 V General control voltage: 24 V Valve control voltage: 24 V Connected load: 43 kW Rated current: 68 A Main fuse: 100 A Lighting connection: 24 V / 18 W Total weight: 9,000 kg Promot loader data Manufacturer: Promot Automation Machine type: PROMOT Portal with Cellmaster Year of manufacture: 2011 Operating voltage: 400 V AC / 50 Hz Control voltage: 24 V DC Load voltage: 24 V DC Rated machine current: 12 A Main connection fuse: 25 A Conductor colors according to Promot nameplate Main circuit L1, L2, L3: 400 V AC – black Auxiliary circuit: 230 V AC – black Main circuit (contactors): 24 V DC – blue Control circuit PC: 24 V DC – blue Control circuit (signal lamps): 24 V DC – blue Control circuit (solenoid valves): 24 V DC – blue External voltage: 24 V DC – orange Neutral conductor N: light blue Protective conductor PE: green/yellow

Condition: used, Year of construction: 2023, Technical details: turning diameter: 770 mm turning diameter over slide: 650 mm turning length: 750 mm max. diameter of work permitted:: 82 mm y-axis: +/- 60 mm turret (x-stations): 12 VDI 40 turning speeds: 4.000 1/min tail stock: ja total power requirement: 47 kVA weight of the machine ca.: 7,8 t dimensions of the machine ca.: 3,3 x 1,9 x 2,3 m Accerories main spindle power 16 / 24 kW CNC lathe, NC-tailstock, C-axis with brake, live tooling (10,5 kW, 5.400 rpm), 3-jaw chuck SCHUNK ROTA THW 260-81, chip conveyor, prepared for oilmist suction, parts catcher and belt (right side), coolant device 300l, 8/20bar, accessories (8pcs. live-toolholder...) approx. 3.000 working hours * Codpfx Aoxhd Ufeftogp

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 350 mm, turning diameter: 350 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 4,500 rpm, feed length X-axis: 205 mm, feed length Z-axis: 580 mm, swing diameter over cross slide: 350 mm, feed rate X-axis: 15 m/min, feed rate Z-axis: 15 m/min, turning diameter over bed slide: 700 mm, workpiece weight (max.): 150 kg, type of input current: three-phase, torque: 250 Nm, overall weight: 4,200 kg, swing diameter over bed slide: 700 mm, bar passage: 65 mm, chuck outer diameter: 200 mm, spindle nose: A2 6, Equipment: documentation/manual, rotational speed infinitely variable, CNC lathe Hwacheon CUTEX 180 BL with 350 mm turning diameter, spindle bore Ø76 mm, 65 mm bar capacity, 12-station turret with 24 indexing positions, and Siemens Sinumerik 828D control. The Hwacheon CUTEX 180 BL is a powerful CNC turning center designed for precise and efficient series production. Featuring a robust Meehanite cast iron bed with high-quality linear guides, the machine ensures outstanding stability and excellent vibration damping during demanding machining operations. The maximum turning diameter is 350 mm, with a swing over bed of 700 mm. The high-performance main spindle achieves speeds up to 4,500 rpm, allowing for high metal removal rates while maintaining excellent process stability. The BL version benefits from an enlarged spindle bore of 76 mm and a bar capacity of 65 mm, making this machine particularly suitable for efficient bar machining and batch production. The machine is equipped with a 12-station turret offering 24 indexing positions. When using double holders, up to 24 tools can be mounted, significantly increasing tool capacity and reducing setup times. Additional features include: - 200 mm 3-jaw hydraulic chuck - Coolant system with 15 bar pressure - Side chip conveyor - Parts catcher - Preparation for bar feeder Control is provided via a Siemens Sinumerik 828D with a large 15-inch display, ensuring convenient programming, quick setup, and high process reliability for daily production. We would be happy to provide further information, technical specifications, or a video of the machine in operation upon request. Inspection of the machine is possible at any time by appointment. CNC lathe Hwacheon CNC lathe CNC lathe 350 mm CNC lathe Siemens 828D CNC lathe bar machining Cgsdpfx Afjyrdf Totsp

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,000 mm, turning diameter over top slide: 570 mm, quill diameter: 340 mm, We are selling a Seiger SLZ570E cycle lathe. The machine was used for single-part production and is in very good condition. It is sold with a large amount of accessories, which can be inspected on site at our premises. Technical data: Control: Heidenhain Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Bed width: 350 mm Spindle head according to DIN 55027 size 8 Tailstock quill diameter: 90 mm Tailstock quill stroke: 180 mm Csdpfoyrb Hbex Aftegp Tailstock taper: MK 5 Centre distance: 1,000 mm

Condition: used, Year of construction: 2000, max swing diameter 700mm, X/Y 255/520mm, tailstock, 12-position tool turret, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 12t Cgodeym Sm Uspfx Aftjp

Condition: excellent (used), Year of construction: 2007, Fagor CNC lathe Full specifications available in photos Codjym Ef Rjpfx Aftegp Machine in excellent condition

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Further information will follow. Csdpfxeyrg Iwj Aftjgp

Year of construction: 2012, operating hours: 0 h, condition: new, machine/vehicle number: 01312012-5, 7 axes simultaneous, control Fanuc 32i-A Manufacturing origin Taiwan Voltage 400/50/3 Netweight 2400 kg Custom position 8458.11 20 Dimensions 2605 x 1420 x 2150 mm TECHNICAL DATA : - max turning dia of main spindle 20 mm - max turning dia of sub spindle 20 mm - max turning length (fixed guide bush) 200 mm - max turning length (rotary guide bush) 85 mm (option : 150 mm) - max turning length (non guide bush) 45 mm - max drilling capacity of main spindle 10 mm - max drilling capacity of sub spindle 10 mm - max tapping capacity of main spindle M8 - max tapping capacity of sub spindle M8 - max cross drilling capacity 10 mm - max cross tapping capacity M6 - number of external turning tools 8 pcs - number of internal turning tools 5 pcs - number of cross drillings 4 (option : 7) - face tool holder (sub spindle) 4 pcs - size of tool 12 x 12 x 90 mm - number of axis controls 7 (X1/Y1/Z1/X2/Z2/C1/C2) - bore of spindle 29 mm - spindle speed range 200 ~ 8000 t/min - rapid traverse X / Z 24 m/min - main spindle motor 3.7 kW - sub spindle motor 2.2 kW - motor axis X1 / Z1 0.5 / 0.75 kW - motor axis Y 0.75 kW - cross drilling motor 0.75 kW - end drilling motor 0.75 kW - motor axes X2 / Z2 0.5 / 0.5 kW - coolant motor 0.375 kW - power requirement 15KVA errors and omissions excepted data gived without obligation Inventory nr. 1120009, standard accessories Spindle servomotor Cgjdpfxsd Hr Imo Aftep External tool holder (8-tool) Internal tool holder (5-tool) Parts catcher Tools & toobox Lighting device Non guide bushing holder Cutting coolant (pump 4T6-6) Lubrication device Operational manual Pressure pushing shank 2 sets Guide bushing x 1 (TD-25S type 16°) Collet chuck x 2 (TF-25 type 16°) Side drilling tool holder (7 tools) Sub-spindle Part conveyor Double C axis Fixed drilling tool holders for sub-spindle x2 Drilling and milling tool holder for sub-spindle External turning tool holder for sub-spindle Sub-spindle tool holder for 4-position excentric end drilling Cutting coolant inspection Formal CE Fixed guide bush holder (TD-25 S type 16°) Chip conveyor with cart Transformer Coolant chiller High pressure coolant blocks

Condition: used, Year of construction: 2010, IMT W20 T2 Vertical Lathe Codpfx Ajwb Svgjftjgp Control: Fanuc 32i-Model A Turning Diameter: 542 mm Chuck: Schunk 500 160 Turning Length: 450 mm Maximum Swing Diameter: 640 mm Maximum Speed (rpm): 2500 Spindle Power: 29.5 HP X-Axis Travel: 450 mm Z-Axis Travel: 450 mm X-Axis Rapid Traverse: 15,000 mm/min Z-Axis Rapid Traverse: 15,000 mm/min Number of Turning Tools: 6

Condition: used, Year of construction: 2006, with C-axis with driven tools FANUC 18T-C control Cedpfxor E Amge Aftjgp turning diameter -380 mm turning length 490 mm Spindle speed -3,500 rpm Upper turret holder with 12 positions, 6 of which are driven Tool presetter Chip conveyor

Condition: ready for operation (used), Centre height: 700 mm Centre distance: 1800 mm Max. swing diameter over bed/in gap: 1300/1740 mm Turning diameter over cross slide: 740 mm 12 spindle speeds: 3 - 135 rpm 12 feeds: 0.15 - 2 mm/rev Cross slide adjustment: 350 mm Electrical connection: 380 V, 6.6 kW Cgjdpfx Afoyn Ed Netop Weight approx.: 5.5 t Required space: 3800 x 1600 x 1700 mm

Condition: used, Year of construction: 2010, DMG CTX alpha 500 CNC Universal Lathe Condition: Used Year of manufacture: 2010 Specifications: Working area: Swing diameter over bed: 500 mm Max. turning diameter: 200 mm Centre distance: 700 mm Turning length: 500 mm Axis travels: X-axis travel: 190 mm Y-axis travel: 80 mm Z-axis travel: 525 mm Main spindle: Spindle bore diameter: 73 mm Spindle speed (S1, 100% duty cycle): 5,500 rpm Spindle speed (40% duty cycle): 5,500 rpm Electrical connection: Rated apparent power: 25 kVA Dimensions: With chip conveyor (LxWxH): 4450x2510x1825 mm Weight incl. control cabinet: approx. 4,300 kg Cjdpfx Afsyrgzqotegp

Condition: used, Year of construction: 1993, Weiler Condor B conventional lead and feed screw lathe Condition: Used Cgjdpfxoyrgx As Aftep Year of manufacture: 1993 Specifications: Distance between centres: 750 mm Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 170 mm Spindle bore: 40 mm Speed range: 22 - 2800 rpm Drive power: 3.2 kW Weight: approx. 1200 kg Dimensions (LxWxH): 1900 x 1000 x 1400 mm Equipment: Lead and feed screw 3-axis digital readout Spindle brake (switchable) Multifix quick-change tool post

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 62 mm, turning length: 1,250 mm, turning diameter over bed slide: 365 mm, center height: 280 mm, overall weight: 4,000 kg, O F F E R We can offer you, subject to prior sale and errors excepted, ex-stock and without obligation: V D F - BOEHRINGER Cjdpsyqw Eqefx Aftegp Cycle-Controlled Universal Lathe Model DUS 560 Year of Manufacture 1998 / completely overhauled in 2008 _____ Centre height 280 mm Max. swing diameter over bed 570 mm Max. swing diameter over cross slide 365 mm Cross slide / top slide travel 345/125 mm Centre distance / max. turning length 1,250 mm Spindle bore 62 mm Spindle speeds, 2-step infinitely variable 3–500 / 15–2,500 rpm Infinitely variable longitudinal and facing feeds 0.01–50 mm/rev Rapid traverse longitudinal/cross 5 and 10 m/min Max. feed force facing/longitudinal 6.5 / 12.5 kN Workpiece weight max. between centers/with tailstock 400 / 1,000 kg Thread pitches 0.1 – 400 mm/pitch Spindle drive motor 15/21 kW Total drive 25 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control, type 805, with direct input of all turning parameters via interactive user interfaces and suitable software, controller and monitor integrated in the sliding door, with memory extension and software for free contour entry, graphics, etc. • 2 electronic handwheels for fine adjustment of carriage movement in Z and X axes, and new joystick for rapid traverse +Z/-Z and +X/-X, joystick for main spindle with stepless forward and reverse speeds • Mounted 3-jaw chuck model SCA Ø 300 mm, faceplate approx. Ø 500 mm, 4-jaw chuck Ø 315 mm, driver plate approx. 250 mm, single faceplate 500 mm, various jaws • Mounted MULTIFIX toolpost type CD with 5 different Multifix holders • Separate toolpost block for mounting CAPTO toolholder with internal coolant supply, various holders, partially with collets • Tailstock with air bearing for easy movement, work light • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate electrical cabinet, adjustable spindle end stop, work light, etc. Condition: very good – guides in very good condition, machine is under power and ready for demonstration Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to receiving your order. Further lathes of all sizes in stock – please enquire.

Condition: used, Year of construction: 1997, Weiler Condor B Conventional lead and feed screw lathe Condition: Used Year of manufacture: 1997 Specifications: Centre distance: 750 mm Centre height: 165 mm Swing over bed: 330 mm Swing over cross slide: 170 mm Spindle bore: 40 mm Speed range: 22 - 2800 rpm Drive power: 3.2 kW Csdpfx Afjyrgw Estegp Weight: approx. 1200 kg Dimensions (LxWxH): 1900 x 1000 x 1400 mm Equipment: Lead and feed screw 3-axis digital readout Spindle brake (switchable) Multifix tool holder

Condition: used, Year of construction: 2003, Lathe DMG Type NEF 320 K Condition: Used Year of Manufacture: 2003 Control: SINUMERIK 810DE-L CCUO Cycles for taper turning and thread cutting Technical Data Swing over bed: 320 mm Swing over cross slide: 150 mm Chuck: 200 mm Cross travel: 150 mm Feed drive AC: 4 m/min Main spindle: Size 6 Spindle bore: 52 mm Spindle mounting: MK 6 Spindle front bearing diameter: 85 mm Drive power: 7 kW Max. torque: 320 Nm Speed range: 14 - 3550 rpm Gear stages: 2 Tool post: Multifix size B Quill: 70 mm Quill stroke: 120 mm Cgedpfoyrggmsx Aftep Quill mounting: MK5 Dimensions Length / Width: 2600 mm / 1440 mm Weight: approx. 1440 kg

Condition: used, Year of construction: 1996, Spinner TC 32 MC CNC Lathe Condition: Used Year of manufacture: 1996 Control: Siemens 810D Conversational programming: Siemens Machine Description: C-axis for spindle with software option Transmit for face machining, and Tracyl (cylindrical interpolation) for outer surface machining. Hydraulic hollow clamping cylinder with three-jaw chuck D125 mm and various set jaws (hard and soft) Fully enclosed splash guard, coolant system, work area lighting Technical Data Turning length: max. 245 mm Chuck: 125 mm Longitudinal travel: 245 mm Spindle bore: 42 mm Spindle motor power: 5.5 kW Tailstock available Swing over cross slide: 120 mm Cgedpfx Afoyrgbqstep Cross travel: 96 mm Spindle nose as face flange: 110 mm Spindle speeds: max. 6000 rpm Rapid traverse: X: 15 m/min Z: 24 m/min Probe for internal tool measurement available Dimensions: approx. 2000 mm x 2000 mm x 2200 mm Weight: approx. 1,400 kg

Condition: good (used), Year of construction: 2007, Turning Length 3.500 mm Turning diameter 720 mm Some technical details are shown on photos. Machine is located in Germany. Cjdpfx Aox Hvvusftsgp

Condition: like new (used), Year of construction: 2022, functionality: fully functional, MAZAK QUICK TURN 250MSY x 1000U Maximum turning diameter: 380 mm Maximum machining length: 1,005 mm Max. main spindle speed: 4,000 rpm Cgodpfeypa Tbox Aftsp Max. sub-spindle speed: 6,000 rpm Max. bar capacity: 80 mm The machine is equipped with: - CNC CONTROL Mazatrol SmoothG - KITAGAWA three-jaw chuck BB-210 for main spindle, diameter 254 mm - KITAGAWA three-jaw chuck B-206 for sub-spindle, diameter 169 mm - Tool Eye - C-axis - C-axis sub-spindle positioning accuracy 0.0001° - Y-axis - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - Standard MAZAK tool package

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : Cgodpfx Ajdr R Tceftsp - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT