Used Cast Angle Plates for sale (19,071)

Condition: used, Technical details: Dedpfx Aksu N Dl Is Aocp floor-plate length: 7040 mm plate width: 2230 mm plate height: 330 mm weight of the machine ca.: 12800 / Stück kg 2 pieces of cast steel plates for sale free. Surface finished T-slots according to DIN 650: a=28mm; h=58mm; b=49mm; c=28, and distance T-slot to T-slot: 305mm The plates are equipped for side mounting/clamping connection. Through holes 11 pieces Ø 28mm continuous with counterbore Ø 600mm x 260mm and 12 pieces Ø 28mm continuous with counterbore Ø 114 x 270mm. Our price per plate. *

Condition: good (used), Year of construction: 1990, total height: 350 mm, total length: 5,100 mm, total width: 1,500 mm, T slotted bed plate STOLLE - Cast iron Floorplate Length: 5100mm Floorplate Width: 1500mm Height: 350mm No. Of T-slots: 5 Distance from T to T-slot / Jump:300mm T -slot size: 28mm Weight a plate approx.: 5800kg Number of matching pieces: 1 Dedpfx Akjxdwwfs Ajcp Length: 5100mm Width: 1500mm Height: 350mm

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, total length: 9,060 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,450 mm, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Hub axle - Aluminum rims - Air suspension - Disc brakes = Notes = Beautiful and fully functional Van Hool 20FT tipper chassis (year of manufacture 2003) with ABS/EBS, SAF axles with disc brakes (Intradisc), 2 lift axles, ADR approval (EXII, EXIII, FL, AT), tipping capability with 24V connection up to a 20° tipping angle, unladen weight: 5,300 kg, permissible total weight: 39,000 kg, tires: 385/65-R22.5 (tread depth left: 4/11/12 mm; tread depth right: 9/11/9 mm), Dutch registration = Further Information = General Information Year of construction: 2003 License plate: OH-91-FS Axle Configuration Tire size: 385/65 R22.5 Dodpoy H Hdpjfx Ak Ascp Axle brand: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 25%; Tire tread depth right: 55% Rear axle 2: Aluminum rims; Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 3: Aluminum rims; Max. axle load: 9000 kg; Tire tread depth left: 75%; Tire tread depth right: 55% Weights Unladen weight: 5,300 kg Payload: 33,700 kg GVW: 39,000 kg Functional Body brand: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Further Information Please contact Arne Honingh for further information.

Condition: good (used), Year of construction: 2000, total length: 3,000 mm, total width: 2,000 mm, plate height: 350 mm, T slotted bed plate Dsdowp Hwhepfx Ak Aocp STOLLE - CAST IRON Cast iron floorplates 3000 x 2000 x 350 mm Floorplate Length: 3000mm Floorplate Width: 2000mm Height: 350mm No. Of T-slots: 6 Distance from T to T-slot / Jump:330mm T -slot size: 54mm Weight a plate approx.: 5700kg Number of matching pieces: 4 Length: 3000mm Width: 2000mm Height: 350mm Weight: 4800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1988, Technical details: floor-plate length: 4000 mm plate width: 2000 mm plate height: 460 mm Dedsu N Druspfx Ak Ajcp weight of the machine ca.: 6000 kg 2 pieces cast steel plates for sale free. T-slots according to DIN 650 a=40; h=56; b=74; c=28mm; center distance of T-slots = 250 mm The plates are equipped for lateral fixing. *

Condition: used, Technical details: floor-plate length: 4900 mm plate width: 1460 mm plate height: 300 mm Plate thickness: 300 mm Dcedoval Hqjpfx Ak Aep weight of the machine ca.: 5,3 / pro Platte t transport dimensions LxWxH: ca. 4,9 x 1,5 x 0,3 / pro Platte m There are two plate fields for sale. Material cast steel T-slots according to DIN 650: a=58; h=108; b=110; c=50 mm Center stand 295 mm 6x through holes Ø 40 mm 2 groove areas are broken out on the face of one panel. *

Condition: used, Technical details: floor-plate length: 3500 mm plate width: 1500 mm plate height: 345 mm weight of the machine ca.: 3,7 / pro Platte t transport dimensions LxWxH: ca. 3,5 x 1,5 x 0,35 / pro Platte m Es stehen 4 Aufspannplatten zum Verkauf. There are 4 clamping plates for sale. Manufacturer: MORA-Meuselwitzer Guss Material cast steel T-slot according to DIN 650: a=13.5; h=24; b=24.5; c=11mm one long side surface finely milled 2x plates are equipped with guide rails * Dsdpfx Aeval Iusk Ajcp

Condition: used, Technical details: floor-plate length: 5040 mm plate width: 2230 mm plate height: 460 mm weight of the machine ca.: 9500 kg Machine table can be used as clamping plate. Dcodpfou N Dqqjx Ak Ajp - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55.5; a=33.0mm - center distance 250mm *

Condition: used, Technical details: floor-plate length: 2500 mm plate width: 1250 mm plate height: 100 mm transport dimensions LxWxH: 2,53 x 1,25 x100 m Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Dcedpswm Ngtofx Ak Asp Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 through-holes with D=17mm *

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1000 mm plate height: 1700 mm material thickness: 150 mm Dedpfxju N Dmls Ak Aocp weight of the machine ca.: 2300 kg Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands securely on the floor. The plate can be moved via two wheels each. *

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m Dodpju N D Rdjfx Ak Ajcp There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm *

Condition: used, Technical details: Dcodpfx Aou N Dglsk Ajp floor-plate length: 3000 mm plate width: 1775 mm plate height: 350 mm Material of the plate = cast steel. incl. 6x adjustment screws M30 7pcs. T-slots according to DIN 650 a=35; h=60; b=62; c=26mm; center distance 250mm The clamping plate is equipped with a side fixing on the longitudinal side and on the front side. *

Condition: new, sheet width 4050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 20 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 12.000 kg range L-W-H 5150 x 2250 x 2200 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Driven by recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table Dodpj Agpg Hjfx Ak Aecp - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet metal support device "MONOBLOCK" * For cutting thin sheet metal * Image shows a machine of similar design

Condition: new, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 10 Stück no. of strokes 14 - 24 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 850 mm oil volume 200 ltr. weight of the machine ca. 6.500 kg range L-W-H 2500 x 2250 x 1950 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Driven by recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function Dods Agphcspfx Ak Ajcp * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet metal support device "MONOBLOCK" * For cutting thin sheet metal * Image shows a machine of similar design

Condition: used, Technical details: floor-plate length: 2003 mm plate width: 1005 mm plate height: 180 mm transport dimensions LxWxH: 2,02 x 1,05 x0,18 m 3 pcs availabe (price per piece) Cast steel Table surface 2020mm x 995 mm Longitudinal groove: Number 4 Size: a=38, h=60, b=59, c=24 mm Center-to-center distance 250 mm Dcjdpownfu Njfx Ak Aop Fixing hole: Number 4 Size D=30mm *

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm plate height: 28 mm weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Dcsdpfju N Dg Sex Ak Ajp Steel plate, cast steel, used - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm *

Condition: used, Technical details: floor-plate length: 4015 mm plate width: 2000 mm plate height: 310 mm weight of the machine ca.: 5800 kg Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm i.D. Dcsdpfx Akju N Drho Aep *

Condition: used, Technical details: floor-plate length: 5600 mm plate width: 1890 mm plate height: 1. 335 2, 390 3, 370 mm weight of the machine ca.: 9,0 pro Platte t transport dimensions LxWxH: 5,6 x 1,89 x 335 (390) (370) m 3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distance 315mm Through-hole Number 23 Size D=130 i.D. * Dcjdpfx Akju Rl Ugs Ajp

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Dcjdpfx Aksu Icn Ee Asp Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 7.800 kg range L-W-H 4150 x 2250 x 1900 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" Dcsdpfx Ae Afzuzsk Ajp - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical machine model

Condition: new, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 16 Stück no. of strokes 9 - 17 Hub/min cutting angle 0.5 - 2.5 ° throat 150 mm table height 830 mm oil volume 250 ltr. weight of the machine ca. 11.000 kg range L-W-H 4150 x 2350 x 2450 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system Dcsdpfx Ako Afzu Ij Ajp * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting along a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical model

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 8.000 kg range L-W-H 4150 x 2250 x 1900 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment + cutting-angle adjustment * Piece counting * Cutting-length limitation Dcedpfxs Afzvre Ak Aep * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel distance . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80.0 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard, with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - 1x mobile foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet support device for cutting thin metal sheets * Image shows a machine of a similar design

Condition: good (used), Year of construction: 1990, overall weight: 6,200 kg, total length: 4,000 mm, total width: 2,000 mm, plate height: 295 mm, T slotted bed plate 4000 x 2000 x 295 mm STOLLE - DTS Cast iron floorplates Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 295mm No. Of T-slots: 4 Dcodpfx Ae Ahhd Eek Aop Distance from T to T-slot / Jump:400mm T -slot size: 42mm Weight a plate approx.: 6000kg Length: 4000mm Width: 2000mm Height: 295mm Weight: 6200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, overall weight: 5,500 kg, total height: 365 mm, total length: 4,500 mm, total width: 1,750 mm, T slotted bed plate STOLLE - RDG Cast iron floorplates 4500 x 1750 x 365 mm (2x) Dedpjzc Idbofx Ak Aocp MACH-ID 6452 Make: STOLLE Type: RDG Year: 2000 Floorplate Length: 4500mm Floorplate Width: 1750mm Height: 365mm No. Of T-slots: 5 Distance from T to T-slot / Jump:320mm T -slot size: 36mm Number of matching pieces: 2 Length: 4500mm Width: 1750mm Height: 365mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Technical details: floor-plate length: 4600 mm Djdpfjwtctgsx Ak Ascp plate width: 1450 mm plate height: 300 mm Plate thickness: 300 mm weight of the machine ca.: 7,2 / Platte t 2 clamping plates ( price per plate) Material cast steel Finished surface T-slots according to DIN 650: a=40; h=66; b=71; c=29 mm Center stand 300mm 6x through holes Ø 41.0 mm *