Used Centering for sale (13,155)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Gbodpfx Asxy Tmnsm Aer

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Gbedoxy Tlwepfx Am Asr

Condition: used, Year of construction: 2011, AXES Gbedpfeyymz Uex Am Asr Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: ready for operation (used), Type: FEELER QM-40S Fanuc 18i-MB control Renishaw tool setter X-axis travel: 1000 mm Y-axis travel: 520 mm Z-axis travel: 505 mm Table size: 520 × 1150 mm Gbjdpfx Asyi H R Tem Aer Max. table load: 500 kg Spindle taper: ISO 40 (7/24 taper No.40) Spindle speed: up to 10,000 rpm Main power: 15 / 18.5 kW Tool changer: 24 positions (random ATC) Max. tool weight: 8 kg Max. tool length: 300 mm Max. tool diameter: Ø80 mm (Ø150 mm without adjacent tools) Rapid traverse: X: 48 m/min Y: 48 m/min Z: 30 m/min Cooling: internal cooling (high-pressure spindle cooling) external cooling chip flushing Required air pressure: 6–8 bar Power supply: 20 kVA Spindle oil cooled Machine weight: approx. 6,300 kg Machine dimensions: 2,800 × 2,185 mm Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is excluding VAT (VAT deductible for businesses)

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA Gbedozqgh Hepfx Am Aer weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2003, XXL-Center RAS 75.06-2 long bending center for fully automatic positive and negative bending, where it is not necessary to turn the sheet metal. Usable length 6400 mm Gbedpfxjzru Nzo Am Aor Maximum sheet metal thickness (400 N/mm²) 1.5 mm Four motorized and extremely fast axes controlled by CNC (no hydraulics) For: • Upper and lower bending beam speed: 126 degrees/s • Upper beam speed: 60 mm/s • Back gauge travel: 12-750 mm • Back gauge speed: 350 mm/s • Bending accuracy (depending on the quality of the sheet metal): up to +/- 1 degree

Condition: good (used), Year of construction: 2005, HURCO vertical machining center with 4th axis, including: 16.000 RPM SK40 (BIG-PLUS) spindle HYDAC cooling unit High-Pressure Through-Spindle Coolant System Tool Length Measurement and Workpiece Position Detection with two Renishaw probing systems CNC-Controlled Rotary Table MR320 X-axis Travel 1270 mm Y-axis Travel 650 mm Z-axis Travel 610 mm Max spindle speed 16000 rpm Gbsdpjzt R Ivsfx Am Aer Full technical specifications in the attached document. Viewing of the machine in operation is possible upon appointment. Availability: 12/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: good (used), Year of construction: 2007, CNC turning machine DOOSAN Type: PUMA 480 LM Year of manufacture: 2007 Control: Fanuc 21i T Technical data Swinging diameter mm 900 Turning diameter standard mm 380 Max. turning diameter mm 650 Turning length mm 2001 Travel X-Z axis mm 362/155 Bar diameter mm 165.5 Spindle bore mm 181 Chuck diameter mm 530 Spindle speed rpm 1500 Gbodpozqzm Dofx Am Aor Drive power kW 45 Tool turret number 12 Powered tools number 12 Speed of powered tools rpm 3000 Drive power kW 11 Accessories 3-jaw power chuck, tailstock programmable (following) with programmable center, chip conveyor with hinged belt, steady rest self-centering SLU 4 Ø 35-245 mm, tool load monitoring, coolant pump 14 bar, Automatic tool measuring arm.

Condition: excellent (used), Year of construction: 2011, operating hours: 2,450 h, travel distance X-axis: 6,000 mm, travel distance Y-axis: 12,001,400 mm, travel distance Z-axis: 18,001,790 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 3,000 kg, total height: 4,700 mm, total length: 12,700 mm, total width: 7,800 mm, rotary table diameter: 2,200 mm, rotational speed (max.): 200 rpm, overall weight: 57,000 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,450 h, coolant supply: 40 bar, number of slots in tool magazine: 60, tool length: 460 mm, Equipment: chip conveyor, documentation/manual, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 6000 Y-axis travel mm: 1200/1400 Z-axis travel mm: 1800 (H) / 1790 (V) C-axis degrees: 360º (0,001) A-axis degrees: ±180° B-axis degrees: ±180° Rapid traverse m/min: 30 Worktable Table dimensions mm: 6000x1235 Milling/turning table nc: Table dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 max. torque Nm: 4600 Spindle Spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/cont) Spindle torque Nm: 382/278 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 With free neighboring places mm: 200 With occupied neighboring places mm: 104 Max. Tool Length mm: 460 Max tool weight kg: 25 Chip-to-chip time s: 9.8 Equipment Electronic Handwheel Godpfxjzb H Tfs Am Aobr Chip conveyor Infrared probe Internal cooling lubricant supply Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Workarea light DXF import function Paper band filter Automatic door Indexing Head Set Up for Shaft Machining Axles can be hydraulically locked using the M function Machine running times Under power: 29447 Spindle Working: 2450 Basic machine dimensions / weight Length mm: 12700 Width mm: 7800 Height mm: 4700 Weight kg: 57000

Condition: good (used), Year of construction: 1997, spindle bore: 62 mm, turning diameter over bed slide: 440 mm, turning diameter over top slide: 230 mm, turning length: 2,000 mm, total length: 3,500 mm, total width: 700 mm, total height: 1,500 mm, spindle speed (max.): 2,000 rpm, Centre lathe ZMM Sliven - CU 400 MACH-ID 9758 Make: ZMM Sliven Type: CU 400 Year: 1997 DBC Turning Length: 2000mm Swing over bed Ø: 440mm Swing over cross slide Ø:230mm Swing in the gap Ø: 620mm Godpfjzpwixex Am Aebr Spindle bore: 62mm Spindle power: 8kW Bed width: 360mm Tailstock spindle Ø: 70Ø Stroke pinole: 180mm Spindle taper: 5Mk Speeds / ranges: 2000Rpm Length: 3500mm Width: 700mm Height: 1500mm Weight: 2600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2015, functionality: fully functional, table length: 6,000 mm, positioning speed: 30 m/min, table width: 2,540 mm, working height: 1,092 mm, workpiece weight (max.): 5,000 kg, overall weight: 24,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO B254 - CNC PUNCHING, DRILLING & THERMAL CUTTING CENTER | YEAR 2015 The Ficep Tipo B254 is a CNC-controlled punching, drilling and thermal cutting center for the complete processing of steel plates and flat products in a single pass. Punching, drilling, countersinking, tapping, marking and thermal cutting via plasma and oxy-fuel are carried out on one machine without intermediate handling. CONDITION Used - technically sound. The machine is currently in productive operation and CAN BE INSPECTED UNDER POWER (by appointment). Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. Details on the technical condition are disclosed individually upon serious interest. FUNCTION & APPLICATION The system combines three processing units in one CNC-controlled line: hydraulic punching unit (1000 kN), drilling head (20.1 kW) and thermal cutting unit with plasma torch (Hypertherm HPR 260) plus oxy-fuel torch. All processes run via the Mitrol CNC as automated machining cycles; the machine processes steel plates up to 2540 x 6000 mm. Typical applications: structural steel fabrication, structural engineering and prefabrication of gusset plates, end plates and connection plates. TECHNICAL DATA - Machine type: Automatic CNC punching and thermal cutting system for plates - Year: 2015 | Serial number: 34201 | Machine weight: 24,000 kg - Working height: approx. 1,090 mm | Max. positioning weight (plate): 5,000 kg - Max. plate size: 2540 x 6000 mm | Min. plate width: 508 mm - Punching force: 1000 kN | Stripping force: 100 kN | Punching tools: 8 - Max. punch diameter: 32 mm | Max. punching thickness: 20 mm - Drilling heads: 1 | Drilling tools per head: 8 - Max. drilling diameter: 40 mm | Max. drilling thickness: 100 mm - Spindle power: 20.1 kW | Max. spindle speed: 4000 rpm - Plasma torches: 1 | Oxy-fuel torches: 1 | Plasma source: Hypertherm HPR 260 - Max. plasma cutting thickness: 35 mm (pierce start) / 60 mm (edge start) - Max. longitudinal feed speed: 30 m/min - CNC control: Mitrol CNC (master/slave), online remote diagnostics - Processes: punching, drilling, countersinking, tapping, milling, marking, scribing, oxy-fuel and plasma cutting Min. plate length, max. overall material thickness and cross positioning speed are confirmed during inspection. SCOPE OF DELIVERY - 1 x Ficep Tipo B254 plate processing center (year 2015) - 1 x Hydraulic punching unit 1000 kN with 8-position tool changer - 1 x Drilling unit 20.1 kW with 8-position tool changer - 1 x Plasma cutting torch | 1 x Oxy-fuel cutting torch - 1 x Hypertherm HPR 260 plasma cutting system - 1 x Marking unit (configuration to be confirmed during inspection) - 1 x Chip conveyor - 1 x Donaldson Torit dust extraction system | 1 x Punching tool set LOGISTICS & LOCATION Gjdoxn T H Depfx Am Asbr Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in Ficep structural steel machines. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing under power | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 1997, Mazak VTC-20B M+ Vertical CNC Machining Centre with Mazatrol M Plus CNC Control, Table Size 1460mm x 510mm, 20 Tool ATC, CAT 40 Spindle Taper, Spindle Speed Max 10,000rpm, Travels X = 1040mm, Y = 510mm, Z = 640mm, Table Load 500kg, Machine Weight 5850kg. S/No. 125075 (1997) Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Gbjdpfxszr Iyms Am Ajr

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Mazak machining center, type VTC-200C, year 2002, in like-new condition, 10,000 rpm with spindle cooling. X = 1660 Y = 510 Z = 510 1000 kg capacity on the table. Several high-quality vices are included. Weight: 9100 kg BT 40 A few holders are included. Space for 30 tools in the magazine. The machine can be picked up ex-works in week 34 of 2026. Gedpfx Aozhv Uwom Aebr

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Gsdsyux S Hepfx Am Ajbr

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, turning diameter: 420 mm, Used Mazak Quick Turn Nexus 350-2-M Gbedpfx Amoyzxtxs Asr year 2004 max turning diameter Ø 420MM max turning length 1000MM 2 axes x/z, C axis, M-spindle The machine is well-maintained and was in production until 31-3-2026.

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 Horizontal Machining Center Spindle cooling Maximum spindle speed: 7000 rpm Z- 1000 mm X- 1300 mm Y- 1100 mm Tool magazine for 80 tools Gbodpeyuyfhjfx Am Aor 1 spindle, 2 pallets, 800x800 mm cubes, x-z-y-b, 4-axis

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes 10-pallet system Gbedpfx Asyrf I Asm Aer We have 2 units available. Price is per unit, ex location.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, Used Okuma MA-600 HB horizontal machining center, year 2008, including turncut function, spindle cooling, 6000 rpm. Travels: Z-810 mm, X-1000 mm, Y-900 mm. Tool magazine for 150 tools, 1 spindle, 4 axes, 6-pallet changer function. Gbedpfeywicvjx Am Asr

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,050 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 880 mm, spindle speed (max.): 7,000 rpm, Used Mazak FH-8800 horizontal machining center Max spindle speed: 7000 rpm Including spindle cooling Gbjdpeyvf Ttofx Am Aer Z-880 X-1050 Y-800 Tool magazine for 80 tools 1 spindle, 2 pallets, 500x500 mm cubes, 4-axis (x-z-y-b)

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar passage: 42 mm, total height: 1,700 mm, total length: 2,220 mm, total width: 1,460 mm, overall weight: 3,100 kg, Miyano BNA-42 DHY3 CNC turning center, manufactured in 2022, in very good and fully functional condition. The machine is immediately ready for operation and has only 2,963 operating hours. HIGHLIGHTS - 2 spindles: main spindle and sub-spindle - 2 turrets - Y-axis on the upper turret - Driven tools - Max. bar diameter, main spindle: 42 mm - Max. bar diameter, sub-spindle: 34 mm - Kraft & Bauer fire protection system - Extraction system - Knoll chip conveyor TECHNICAL DATA Main spindle - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle motor power: 7.5 / 5.5 kW - C-axis resolution: 0.001° Sub-spindle - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle motor power: 5.5 / 3.7 kW - C-axis resolution: 0.001° Upper turret - 8 stations - X-axis travel: 140 mm - Z-axis travel: 235 mm - Y-axis travel: 70 mm (+/- 35 mm) - Speed of driven tools: 5,000 rpm - Power of driven tools: 1.0 kW Lower turret - 6 stations - X / Z-axis travel: 140 / 310 mm Gbjdpjw Igyrefx Am Aer Electrical supply - Total connected load: 30 kVA Dimensions and weight - Footprint: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: approx. 3,100 kg The machine is located at our facility in Hornberg. Further information and additional images are available upon request.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI mit SmartNC, table width: 500 mm, table length: 900 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of slots in tool magazine: 30, Equipment: chip conveyor, For sale is a very well-maintained vertical CNC machining center, Quaser MV 154 P, manufactured in 05/2015, with initial commissioning in 09/2016. The machine is in very good technical condition and fully functional. A particular advantage is the recently renewed main spindle, which has only approximately 10 operating hours – the spindle is practically as new. An inspection while the machine is powered on is possible by prior arrangement. TECHNICAL DATA Control: - Heidenhain iTNC 530 HSCI with SmartNC Travel distances: Gjdpfjibat Isx Am Aebr - X-axis: 760 mm - Y-axis: 530 mm - Z-axis: 560 mm - Rapid traverse: 40 m/min Main spindle: - Maximum speed: 12,000 rpm - Maximum power: 25 kW Tool magazine and work table: - Tool magazine: 30 positions - Table size: 900 × 500 mm EQUIPMENT - Chip conveyor - Inclined bed filter system - Zero-point clamping system - 4th axis Rotamatik 120 - Blum measuring probe RENEWED COMPONENTS - Main spindle renewed, operating time only approx. 10 hours - Motor newly re-bearinged - Ball screw of the X-axis renewed - Däublin unit renewed The machine can be inspected and demonstrated at our location in 78132 Hornberg by arrangement. For questions, further technical information, or to arrange an inspection, Arnd Sauter GmbH is always at your service. Price: 55,000 EUR net, ex works. Subject to prior sale and errors.

Condition: used, Year of construction: 2005, Available immediately ex-yard: CNC turning and milling center Mori Seiki Type ZT 1500 YB Year of manufacture 2005 Gbedozt U Tpjpfx Am Ajr CNC control MSX 501 Main and counter spindle, 2 tool turrets, powered tool stations Turning diameter max. 310 mm Max. distance between spindle centers 1000 mm Max. turning diameter 190 mm Max. turning length 235 mm Spindle speeds 50 – 5000 rpm Drive power main spindle 22/18.5 kW Spindle bore 73 mm Chuck diameter 210 mm Bar diameter 52 mm Tool turret 2 Tool positions 2 x 16 stations Number of powered stations 2 x 16 stations Speeds of powered stations max. 6000 rpm Drive power each 5.5 / 2.2 kW Chip conveyor Coolant system Y-axis 1 x C-axis 2 x Counter spindle Powered stations 2 x Tool turrets 2 x Fixed tool holders 12 plus 10 Powered tool holders 6 plus 1 Bar loader IEMCA Master 880 MP – E Weight 10 tons

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 200 mm, spindle bore: 38 mm, turning diameter over bed slide: 300 mm, turning diameter over top slide: 200 mm, center height: 150 mm, turning length: 610 mm, total length: 1,320 mm, total width: 610 mm, total height: 1,250 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 75 rpm, Model: GH 1230 Year: 2015 Swing Over Bed: 300mm Swing Over Top Slide: 200mm Distance Between Centres: 610mm Spindle Speeds: 75-2000 RPM Spindle Bore: 38mm Machine With: Digital Readout Gsdpfx Amozlhuke Aobr 3 Jaw Chuck 4 Jaw Chuck Some Tooling Dimensions: 1320 x 610 x 1250mm High Weight: 520 KGS

Condition: used, functionality: fully functional, turning diameter over cross slide: 660 mm, spindle bore: 105 mm, turning diameter: 910 mm, turning diameter over bed slide: 813 mm, turning diameter over top slide: 535 mm, turning length: 2,500 mm, spindle speed (max.): 643 rpm, spindle speed (min.): 16 rpm, Binns & Berry TB 909 Double Gap Bed Lathe Model: TB 808 Swing Over Bed: 808mm (32”) Swing Over Top Slide: 535mm (21.4”) Gsdpszlhtajfx Am Ajbr Distance Between Centers: 2500mm (100”) Spindle Speeds: 16.6 – 643 RPM Spindle Bore: 105mm (4.2”) Machine With: 4 Jaw Chuck 3 Jaw Chuck Fixed Steady 2 Axis Digital Readout Rapid Traverse To Saddle

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 2,000 mm, Mazak CNC Mill – Turn Centre Model: E-650H Control: Mazatrol 640M Pro Gjdpfx Amszlhp Io Asbr Year: 2004 Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist