Used Chip Bonnet for sale (4,549)

Condition: good (used), Hood, John Deere Redpfx Agjb A St Aolon -Type: 318 -With: lettering -Dimensions: 920/380/H180 mm -Weight: 2 kg

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates Redpfx Agovt R Akjlen -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 160 mm -Connection output: 150 x 130 mm -Base plate: 580 x 520 mm -Dimensions total: 990/810/H1055 mm -Weight: 365 kg.

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. Redpfxexwhw As Aglon FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW Rjdpfx Aeb Ilw Tjglen -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible Rodpfx Agsb Iqf Nslsn -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Condition: good (used), Filter hose chip extraction, dust bag, filter, filter bag for chip extraction, dust extraction, extraction system, ventilation ducts and fittings, exhaust hose, extraction hose -Ventilation hose:Exhaust hose with flange -Flange: Ø outside 290 mm, slightly curved -Length: 3500 mm -Number: 20 hoses available -Price: per piece Redpfxepyk Nfe Aglen -Weight: 1.6 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, POWER kW 2.2 FREQUENCY Hz 50 Rjdpfx Agox U D Dcelsn SUPPLY VOLTAGE V 400 MAXIMUM VACUUM mbar 30 MAXIMUM AIR FLOW m³/h 1400 NOZZLE DIAMETER ømm 160

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Redpfsyalblox Agljn

Condition: excellent (used), Chip conveyor from the manufacturer MAYFRAN, model 40.6GS-HR/SP20, conveyor belt length 4200 mm, in very good technical and optical condition, labeling of the control buttons can be relabeled in German or English on request. Rjdpfx Aewk Igaoglsn

Condition: good (used), Year of construction: 1990, Radial fan, chip extraction blower, fan, extraction, chip blower -Radial fan in galvanized housing with sound insulation Redpfx Aeb A H Raegljn -Engine power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Inlet connection: Ø 800 mm -Outlet connection: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW Redob Ig Ugspfx Aglsn -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Rodpfxjwczfao Aglsn

Year of construction: 2003, condition: used, wood chip sieve Rsdpfxjx Ta Nfj Agljn

Condition: used, General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Rodpfx Agegg Sbvslon

Year of construction: 1983, condition: used, Well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Rsdpfjgg Sbnox Aglon

Condition: used, General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Redpfxogg Sb Ie Agljn

Condition: used, General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition. Dimensions: Rjdpfogg Sbcox Agljn

Year of construction: 1979, condition: used, - KOM 1557 - Rjdegg Sabspfx Aglsn General / technical data: well preserved chip conveyor & high discharge for CNC lathe or similar machines Remark: The equipment is in our stock and can be inspected under power. The hinge is in good condition.

Condition: good (used), Chip extraction, filter extraction, bagging filter -Drive: 0.96 kW Rodeb A E Uhepfx Aglen -Speed: 2800 rpm -Connection: Ø 50 mm -Connection: 380 V -Dimensions: 780/470/H340 mm -Weight: 135 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed) Rodsw Rpdrjpfx Aglsn

Condition: used, Chip screen Manufacturer: Bruks Model: BS-32/4 Average capacity: 60 m³/h Momentary peak capacity: 100 m³/h Chips screening area (top deck): 5 m² Redpfjx S Hkgsx Aglon Pinchips screening area (intermediate deck): 3.1 m² Fines screening area (bottom deck): 2.4 m² Installed power: 4.0 kW Net weight: 1.800 kg

Condition: new, Ceramic and plastic vibratory grinding and polishing chips / porcelain chips Rsdpfebdf Evjx Aglsn balls, triangle, tristar, cylinder, elipse, pyramid, cone... sizes and prices on request

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). Rodpfx Aex Agpzoglon The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2025, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA Rodjvzqtxopfx Agljn 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: new, Year of construction: 2026, The CORMAK extraction units of the DCV series have been developed for the filtration of primarily very fine-grained dust. It is designed to clean itself in an automatic cycle without any effort on your part. Our technology department has placed great emphasis on creating a motorised shaking system in which the entire filter cleaning cycle takes place automatically in a closed system. Strengths of the DCV dust extraction units Robust solid construction for quiet and vibration-free operation of the dust extractor Very high tightness of the entire extraction system, guaranteeing best air quality inside the plant and no heat loss during the heating period Powerful and quiet radial fan for high vacuum performance Possibility to build a ceiling system and feed several machines working simultaneously with the DCV extraction units Trouble-free automatic filter shaking system Mobile chassis to facilitate trouble-free movement of the extraction units throughout the plant Waste containers designed to maintain 99.99% containment and equipped with a mobile trolley system Control cabinet with the possibility of precise tracking of filter contamination status or activation / deactivation of the unit The polyester filter traps dust with a diameter of up to 5 microns, for the filtration of smaller particles a filter such as HEPA must be used It is forbidden to use this extraction in explosive atmospheres. The extraction is used for working in the carpentry industry with sawdust, shavings, dust (it is not suitable for working with wet raw material e.g. wet sawdust) Before activating the extraction, the lower beam has to be dismantled in order to have free access to the chip container Technical specifications CONTINUOUS DUTY MOTOR POWER S1 3.0 kW RPM 3000 rpm EXTRACTION CAPACITY 4500 m3 DIAMETER OF THE SUCTION NOZZLE 200 mm SUCTION VELOCITY 28-32 m/s FILTER AREA 6 m2 Rsdpfsuc Unqox Agljn FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 18 DIMENSIONS 752 x 1502 x 2200 mm WEIGHT 200 kg