Used Chip Bonnet for sale (4,635)

Condition: new, - Conveyor belt / chip conveyor belt for dowel drilling machine Nottmeyer or similar. Kodpfsguak Ajx Anyslu - Length (mm): approx. 7520 - Width (mm): approx. 770

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: Nr.50086, New machine for sale due to circumstances: 6 connection points with ventilation duct. Collection only! Price ex location 31637 Rodewald. Kljdpfx Answ Uf S Hjyou

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Kledpfx Aei A Ix Hsnyou

Condition: ready for operation (used), With hydraulic pump. Klodpfshw E D Sjx Anysu

Condition: ready for operation (used), belt conveyor for chips and wood waste and bark Kljdpfxepkzwmj Anyou functional length approx. 3500mm width approx. 400mm BEVI motor 2,2 kW, 400 V

Condition: like new (used), Year of construction: 2022, operating hours: 1 h, functionality: fully functional, total length: 5,595 mm, total height: 2,031 mm, total width: 680 mm, delivery head: 1,550 mm, ejection height: 1,400 mm, type of input current: three-phase, conveying length: 2,750 mm, input voltage: 380 V, transport height: 450 mm, conveyor belt length: 5,595 mm, input current: 1 A, input frequency: 50 Hz, Deburring conveyor technology for dry operation Type: P-40 Design: Z-shape Chain pitch: 40 mm Conveyor width (standard): 680 mm Container width: 680 mm Loading length: 2,750 mm Loading height: 240 mm Loading area: 2,750 mm Incline angle: 30° Discharge height: 1,550 mm Discharge height above floor: 1,400 mm Discharge length: 450.0 mm Total conveyor length: 6,157 mm Lifting eyes: Yes Inclined section covered: Yes Loading hopper: Yes Covers in loading area: Smooth sheet steel Discharge chute: Yes Discharge chute height: 150 mm Reach-in protection per EN618: Yes, conveyor CE-compliant Castors: Yes Kljdpfxowvgpkj Anyju Adjustable feet: Yes Drive: Gear motor Drive position: Right side Brand: SEW Power consumption: 0.25 kW Overload protection via limit switch (slip ring)

Year of construction: 2003, condition: used, wood chip sieve Ksdpfex Ta Nfsx Anyolu

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h Kjdpfxsw Nqu As Anyelu - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr Klodpfx Aew Nq Amjnyou - Brass: 2.2 t/hr - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: new, Available from stock in various versions! Suitable, for example, for machines from Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. For installation on aluminium circular saws, ideally suited for double mitre saws and automatic sawing systems. Power output 2.2 or 3.0 kW, with or without remote start feature. 160 litre removable container. 2 extraction ports. Mobile, with 2 lockable rollers. Hoses, connectors, and reducers available to suit your requirements. Kljdpfswczfaex Anyju

Year of construction: 2026, condition: new, Screening plant for screening wood chips Design: stationary or semi-mobile New production Screening capacity: approx. 20 - 40 m³/h (depending on design) consisting of: - Vibrating hopper type AVB - Screening machine type ASM - Bottom frame / hook lift (option) - Trough belt conveyor belt type MFB - Electrical installation Functional description and mode of operation: The woodchips are fed into the vibrating hopper by means of a wheel loader. The wood chips then pass onto the oscillating screen type ASM. The screen separates the wood chips into three size classes (overlengths, chips, dust). The fractions are discharged from the wood chip screen by means of conveyor belts. The capacity of the screening machine (depending on the design) is between 20 - 40 m³/h for wood chips. Advantages: Kedpfx Anjin Ewloyelu - High screening capacity - High separation efficiency - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive operation in woodworking shops and manufacturing facilities. The unit stands out thanks to its two high-capacity BIG-BAG containers, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it ensures effective extraction of sawdust, dust, and wood chips even during long-term continuous operation. Key Advantages Two BIG-BAGs – a unique market solution increasing waste collection capacity VIBER system – automatic filter shaking ensures consistent extraction performance TC housing – fully enclosed, sound-insulated design reducing noise and vibration DAMAGE PROTECT – mechanical protection safeguarding the impeller against damage from larger objects REHEAT – heat recovery from exhaust air, improving the facility’s energy efficiency Construction and Technology Kljdeudav Njpfx Anyju The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced impeller, ensuring stable, trouble-free operation and high suction performance of up to 11,300 m³/h. The housing is designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Precision and Performance With 64 polyester filters rated at 5 microns and the option to install an additional HEPA filter, the unit guarantees safe and highly efficient air purification. The high suction velocity (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG model is an ideal solution for: woodworking shops furniture factories operators of panel saws, edge banders, and sanders other facilities requiring a central dust extraction system Standard Equipment VIBER automatic filter cleaning system Two BIG-BAG containers Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT safety system Optional Equipment HEPA filter for ultra-fine particles BIG-BAG fill level sensors Automatic fan reverse system Technical Specifications Power supply voltage: 400 V Power: 11 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 64 pcs Filtration area: 30 m² Inlet diameter: 350 mm Outlet diameter: 500 mm Capacity: 11,300 m³/h Vacuum pressure: 3000 Pa Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3250 × 1100 × 3700 mm Weight: 820 kg

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, Klsdpfx Ansvzqtxjysu low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Year of construction: 2005, condition: excellent (used), engine power 55 kW sieve diameter 6 mm Klodslx Ndlopfx Anyeu rotor width 450 mm

Condition: used, Chip screen Year of manufacture: 1996 Kedpfx Anoyhn Dxjyjlu Manufacturer: Konewood/Andritz Model: CS600 Screen capacity: 400-675 m3/h Weight around: 10 tons

Condition: refurbished (used), Wood chip screen IDL000756 - Three layers - Manufacturer: Passimo OY Kledpfxetmtf Rj Anyeu - Screen area: 15 m2 - After renovation.

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Kodjrl Ra Hspfx Anyjlu Drying capacity - 10t/h

Condition: new, Chip Screen Manufacturer: Vecoplan Module: VSS 15/2 Year: 2016 Klodjwqmpajpfx Anyju Screening area: 1.5m2 Number of screen floors: 2 pcs Length: 3900mm Width: 1750mm Height: 1950mm Weight: 2300kg

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Kedpfewp Rqfjx Anyjlu Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: new, functionality: fully functional, Year of construction: 2026, Applications & Customer Benefits: Ideal for handling, transporting, and separating liquid–solid materials in industrial, workshop, and warehouse environments. Customers benefit from safe material flow, easy mobility, and reduced downtime thanks to durable, ergonomic design. Key Features: • Robust S235 steel (3 mm), oil & water proof • Chain lock with push handle for safe handling • Painted or galvanized finish for durability • 2 fixed wheels + 2 swivel wheels with brakes, solid rubber Ø180 mm • Forklift entry pockets for easy transport Additional Options: Kedpfx Ajw U Axdonyjlu • Sieve plate & 1" drain valve for liquid/solid separation • Custom color on request Tech Highlights: L 1.38–1.44 m · W 1.07–1.31 m · H 1.05–1.23 m · Qmax 300 kg · Volume 500–1000 l · Weight 180–260 kg

Condition: new, Year of construction: 2026, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 230V or 400 V / 50 Hz SUCTION CONNECTIONS Kledpfx Ansvuggheyeu 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg The price given is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, A machine designed for aluminium and steel chips (not aluminium dust) as well as grinding dust collection from machines, along with cleaning workstations. A side turbine makes the collector perfect for connection to machines that produce large number of chips. Also equipped with a dust filter and a tank (a drawer) for by-product removal. Machine features Quick and easy filter replacement Large container for waste with easy access Compact and stable body High efficiency Kledjvuq Amopfx Anyju Technical data Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400V/50Hz Intake connectors 2×100 mm Suction efficiency without bag 2200 m³/h Suction efficiency with bag/hose 1500 m³/h Dimensions 840×660×710 mm Weight 72 kg

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 Kjdpfx Aneudaazeyelu DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Kledpfxsq Nmw Ie Anyeu

Condition: not inspected (used), Year of construction: 1993, operating hours: 23,456 h, functionality: unexamined, machine/vehicle number: 22734, overall weight: 1,500 kg, power: 160 kW (217.54 HP), heating capacity: 160 kW (217.54 HP), space requirement length: 2,000 mm, space requirement height: 2,200 mm, space requirement width: 1,100 mm, temperature: 95 °C, Mawera FU160 TRA boiler body for sale as spare part. Untested, dismantled, ready for loading immediately. Klsdovvmvfopfx Anysu