Used Chips for sale (4,458)

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 22.12.2221, Equipment: chip conveyor, Chip conveyor that fits PUMA DNT 2600M from SARIGOL. Csdpfxou Up Dko Afpogn

Condition: refurbished (used), Chip conveyor MAYFRAN MT-10 for OKUMA LR-15 lathe Cjdpfx Afex Aggaepsgn

Condition: used, Tipping container for forklift trucks RMS Rotherm Mechanical Systems Type KK-125 Chip bin - bulk tipping container - folding container Manufacturer no.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping body - Tipping process is triggered by gravity - 4 polyurethane swivel castors, Ø 160 mm, 2 of which are swivel-mounted - Fork entry pockets/forklift attachment Codpfx Aoxpqzzsfpsgn Dead weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Overall height with chassis: 1190 mm Good condition Suitable for collecting, storing and transferring recyclables

Condition: used, SPE Renergi Low Temperature Dryer. Codpfjwp Rqfox Afpogn The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: ready for operation (used), Chip conveyor, chip transporter, Knoll 320 S-1/200, Used Machine Manufacturer: Knoll Type: 320 S-1/200 Overall Dimensions: Width: 6200 mm Depth: 1300 mm Height: 1610 mm Belt Specifications: 480 x 130 x 60 x 310 mm Cgjdpfx Afjxtwqdjpon Belt Speed: 1.8 m/min Year of Manufacture: 2015 Discharge Opening Size: 550 x 530 mm Hopper Opening: 3120 x 410 mm Slat Pitch: 315 mm

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 215 mm, travel distance Z-axis: 520 mm, quill diameter: 72 mm, quill stroke: 110 mm, overall weight: 3,070 kg, swing diameter over bed slide: 500 mm, swing diameter over top slide: 220 mm, Equipment: chip conveyor, CNC lathe OPTIturn S600 slant bed with Sinumerik 828 D control system, including the following options: - Safety Integrate - Remnant material detection and processing - Shopturn step programming - Network drive management - 3-D simulation - Real-time drawing/track back - 15.6-inch color display, multitouch - Spindle mount DIN ISO 702-1 No. 6; chuck through-hole Ø 65mm; hydraulically operated chuck Ø 215mm; tailstock mount MK4 - Hydraulic tool turret LS200 with 12 tool stations, max. holder height 25mm - 30° slant bed for especially large machining diameters - Dimensionally stable linear guides ensure long service life through maximum static and dynamic rigidity - Handwheels for manual movement - Heat exchanger on control cabinet - Includes machine feet - Hydraulic unit 1500W, 60 liters - Foot pedal for hydraulic chuck clamping/release - Foot pedal for tailstock with hydraulic quill - Halogen work lamp - Siemens servo motors on all axes - Chip conveyor - Chip trolley - Device for manual tool measurement - Portable electronic handwheel - Renishaw tool probe - Includes machine feet - Electrical connection, 31 KVA three-phase 400V ~ 50 Hz - Control upgrade PPU290 SW8 - Sauter turret VDI30-12T - Automatic tailstock movement - Through-spindle coolant 20 bar - Oil skimmer - Coolant pump 5 bar - Automatic tool measurement - Automatic parts catcher Cjdpsw U Rv Dofx Afpogn - Axial driven tool holder - Radial driven tool holder

Condition: good (used), Year of construction: 2018, functionality: fully functional, Wood chip heating system with moving grate combustion, with flue gas dedusting, with Glosfume fine dust filter system. Boiler size: 257 cm long, 151 cm wide, 293 cm high. Weight: 7 tons. Dismantling must be performed by the buyer. Codpfxsxciido Afpsgn

Condition: new, - Conveyor belt / chip conveyor belt for dowel drilling machine Nottmeyer or similar. - Length (mm): approx. 7520 - Width (mm): approx. 770 Codpfjguak Asx Afpogn

Condition: used, Tipper container for forklift RMS Rotherm Mechanical Systems Type KK - 125 Chip container - bulk container - folding container Manufacturer No.: 84477 Year of manufacture: 2011 Load capacity: max. 2000 kg Volume: approx. 1 m³ Fork entry pockets: 200 x 60 mm Fork spacing inside/outside: 505/900 mm - Manual locking device for the tipping trough - Tipping process triggered by gravity - 4 plastic caster wheels Ø 175 mm, 2 of which are swivel wheels with wheel locks - Fork pockets/forklift carriage pick-up Net weight: 195 kg Width: 1130 mm Depth: 1570 mm Container height: 880 mm Cjdpfx Afjxcbn Sjpogn Overall height with chassis: 1200 mm Good condition Suitable for collecting, storing, and transferring recyclables

Condition: used, The chip conveyor is a single conveyor, it is used to continuously and reliably convey short broken metal chips from the working area of the machine tool into a collecting container and at the same time to separate the metal chips from the cooling lubricant. This ensures more efficient production processes, improved dimensional accuracy of the workpieces and a longer shelf life of the coolant. The chip conveyor consists of a metal housing with a central chain strand and drivers. It is driven by a 230 V three-phase geared motor which can be connected to your machine tool by means of a plug. Oil return guide Cgodpeclu H Uefx Afpon

Year of construction: 2001, condition: like new (used), Filter area: 22 m²# Csdek Tahzepfx Afpjgn Nominal volume flow: 4700 m³/h Minimum flow rate: 3530 m³/h External pressure suction port at V min.: 2450 Pa Sound pressure level max.: 69 dB Suction nozzle Ø: 250 mm Suction engine speed: 3000 rpm Motor: 400V 5.5KW Required space: 2520 x 900 x 1963 mm Weight: 730 kg

Year of construction: 2002, condition: good (used), Hinge width 300 mm Slide-in width - / height 390 x 100 mm Insertion length 4615 mm Height from floor to lower edge of chip ejector 700 mm Hinge drive 0.37 kW Transport dimensions L x W x H approx. 5965 x 750 x 1010 mm (height without feet!) Weight approx. 500 kg Foot height adjustable yes This hinged chip conveyor manufacturer TEKNICALDE model TC 1 ½ 300 was used on a CNC bed milling machine MTE Kompakt. Cedpfx Aemdqx Hsfpegn Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Cgjdpfx Afshwt H Aopsn Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: used, Tipping container, tipping skip for forklift trucks Chip container – bulk tipping skip – folding container Load capacity: approx. 1000 kg Volume: 1 m³ Entry brackets: 230 x 110 mm Fork spacing inside: 160 mm Fork spacing outside: max. 600 mm - Fork entry pockets – entry brackets for transport and emptying by forklift or pedestrian pallet truck - Manual tipping mechanism via hand lever - 4 heavy-duty plastic fixed castors Ø 175 mm, 2 of which are swivel castors - Foldable tow bar Csdpfehly Ifjx Afpjgn Dead weight: 220 kg Length: 1700 mm Width: 1060 mm Height: 1500 mm Very good condition Suitable for collecting, storing and transferring recyclable materials

Condition: used, Chip conveyor, scraper conveyor with coolant tank KNOLL type 750 K-3/650 Scraper belt conveyor Serial no.: 346919 Order no.: 200725773 Year of construction 2007 Metal link width approx. 670 mm Codpfx Afephvl Tspegn Distance between flights approx. 550 mm Length of possible chip removal 330 to approx. 3000 mm Insertion length approx. 2700 mm Insertion height approx. 400 mm Insertion width approx. 860 mm Conveyor height - ejection height 1800 mm Belt speed approx. 20 mm/sec. = 1.2 m/min. Motor power belt drive 0.55 kW Motor power coolant pump 3.0 kW Coolant pump flow rate 40 liters/min. Mains connection 400 Volt, 50 Hz - Scraper chain drive via gear motor - Coolant tank with integrated pump - Coolant pump, BRINKMANN centrifugal pump, type TS 24/180 - Steel cover plates with drop handles for lifting, chequer plate can be used Space requirement L x W x H 6100 x 1150 x 2320 mm dead weight approx. 2000 kg good condition The conveyor is for transporting chips from a milling machine, lathe or machining center.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1410x1130x1295 mm Codpfsvz Ei Iex Afpsgn Weight 320 kg Total power requirement 22 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 890x1081x830 mm Csdsvz Emaopfx Afpsgn Weight 268 kg Total power requirement 15 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 740x630x1028 mm Weight 60 kg Codpovz Endsfx Afpjgn Total power requirement 3 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 910x1200x850 mm Weight 400 kg Total power requirement 18,5 kw Cedovz Exvepfx Afpegn

Year of construction: 2025, condition: new, Dimensions (L/W/H) 690x771x790 mm Weight 130 kg Total power requirement 5,5 kw Cgjdevz Enwopfx Afpon

Year of construction: 2025, condition: new, Dimensions (L/W/H) 800x847x790 mm Weight 250 kg Cedpfovz E Dlsx Afpogn Total power requirement 7,5 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 880x1037x820 mm Weight 188 kg Cgedpsvz Ew Eofx Afpsn Total power requirement 11 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1510x1250x1400 mm Weight 600 kg Cgodjvz Enqjpfx Afpsn Total power requirement 30 kw

Condition: used, Year of construction: 2019, functionality: fully functional, total height: 5,000 mm, total width: 5,000 mm, total length: 10,000 mm, We are selling this chip processing plant from SPYRA. Coarse metal parts (tramp metal) in the chips, which can cause malfunctions and operational disruptions in conventional centrifuges and chip crushers, are no problem for SPYRA machines and systems! Year of manufacture: 2019 Plant components: - Chip shredder - Chip centrifuge (for de-oiling) - Lifting and tilting device (for filling the chip crusher) - Conveyor belt (from the chip crusher to the centrifuge) - Swivel conveyor belt after the centrifuge (for filling several containers) - Control cabinet The machines in the system can be set up in various ways, so the dimensions are not fixed. The system comes with complete documentation, including drawings, operating instructions, etc. for all system components. Cgodpfx Aexpwy Rjfpjn If you have any photo requests for specific parts, please let us know exactly which ones you would like us to send you. This also applies to any further information about the system. If you are interested, please send us a realistic offer. The system can be viewed before purchase in 78554 Aldingen (Germany).

Year of construction: 2023, condition: like new (used), 2 SPECIAL TIPPING SKIPS BN2100 L GOUBARD ON WHEELS D 160, PAINTED, SEALED DOOR, FIXED LID WITH COLLAR + AUTOMATIC RELEASE. FORK PASSAGE 170x70 MM, AXLE SPACING 900 MM – SPECIAL DOOR – DUST TIGHT. NEW UNIT PRICE: €4,500.00; FOR BOTH SKIPS: €4,500.00. Codow Ex T Hjpfx Afpegn