Used Cling for sale (2,405)

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Gjdpfjw Am Nqsx Ag Tebg Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Year of construction: 2024, condition: new, - Cutting Force : 1100 Tons - Capacity : up tp 50 tons per hour - Side Compression Force : 2 x 120 Tons - Clemp Compression Force : 160 Tons - Electric Motor : 264 kW - Machine Weight : 85.000 kg - PLC Controlled - Remote Control Avaliable - Output Length Adjustable Gbededfcpaopfx Ag Tjg

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Frequency-controlled feed belt Gsdpfoxcuviex Ag Tsbg This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel Gbedpfovrw Ansx Ag Tsg (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Gbjdpexrta Eofx Ag Tjg Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, Alligator shear Gedjhq Nlgspfx Ag Tjbg brand new AVAILABLE NOW, ex work IUT Beyeler AG, DE-06188 Landsberg Financing and rental possible. We are looking for used alligator shears! The McIntyre 407 Alligator shear is a non ferrous shear which is both affordable and efficient. It has a 407mm 16″ blade length and enough power and speed to handle a wide variety of cutting tasks. This versatile alligator shear was built originally for scrapyard use so is robust enough to withstand difficult working environments. It is now our most popular shear with thousands in daily use worldwide. The McIntyre 407 non ferrous scrap shear can handle: Automotive scrap Whole gear boxes Cylinder heads and blocks Oversized gate valves And of course all the usual non ferrous metal cutting tasks. It can also handle ferrous metals if needed.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator, drive power: 250 kW, control cabinet with star-delta starter. Rotor length: 1200 mm, rotor diameter: 800 mm, number of knives/rotor: 36 pcs, number of knives/stator: 4 x 6 pcs. 2 hydraulically swiveling stators with 2 rows of counter-knives each. Hydraulic pusher, bearing temperature monitoring, central lubrication for rotor bearings. Net weight: 29,800 kg. Year of manufacture: 2005, overhauled in 2025, all wear parts have been replaced. Gbjdpfxsxiw Hwo Ag Teg

Condition: used, Year of construction: 2006, Bale size 400x400 mm Force 1 Step 850 KN Force 2 Step 850 KN Force 3 Step 850 KN Steel < 8 to/h Aluminium < 4 kg/h Driving Power 50 KW Arrangement Surface 7,5 x 7,2 m x m Machine weight 29 to Press box aperture1,9 x 0,95 mxm Gbodpfx Asltinwsg Teg Place: Germany Available immediately

Year of construction: 2013, operating hours: 10,000 h, condition: used, functionality: fully functional, Recent 75 Extruder - Re-pelletizing line Austrian-made, designed by engineers who left EREMA. The manufacturer was later acquired by EREMA. First commissioning: March 2013 Current operating hours: ~10,000 hours Usage history: 2013–2018: operated in a polyethylene film blowing plant, with technological waste 2018–2020: operated in a recycling plant, with irregular utilization 2020-2023: operated intermittently The line is for sale as a complete extruder, equipped with conveyor belts, and a metal detector. Materials processed by the extruder: LDPE, LLDPE, HDPE, PP, POM (According to the accompanying manufacturer's description, it is also suitable for granulating other materials.) COMPONENTS - With metal detector, - Large feed belt - Agglomeration unit - Stainless steel drum, diameter: 1000 mm - Drive motor: AC 55 kW Main parameters of the extruder Screw diameter: 75 mm Screw drive: 65 kW Consists of 4 separate motors that switch on depending on the load! Favorable energy consumption! L/D ratio: 35 D Variable screw speed Gjdox Ddatopfx Ag Tjbg Touchscreen control panel Double degasserer Double filter changer Head cutting section with shaking table Centrifuge Liquid cooler. Check out our other products.(Shredder, Grinder, washing-line...)

Condition: excellent (used), operating hours: 2,658 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,000 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, input current: 200 A, oil tank capacity: 1,250 l, empty load weight: 29,000 kg, Technical data baler: Manufacturer BOA Recycling Systems B.V. Type M75-45-A-5-1.6 Ecoline Year of construction 2021 Hours of operation 2,658 hours (as of May 2024) Number of pressed bales 42,212 pieces (as of May 2024) Press power main press 71,2 kN (71 t) Specific press capacity 9 kg/cm² Operating pressure 280 bar Cylinder stroke 2,200 mm Feed channel 1,620 x 1,000 mm Capacity per cycle time 2,4 m³ Theoretic cycle time 21 seconds Theoretic throughput rate 450 m³/hour Bale size 1,100 x 720 mm, length variably adjustable up to 1,400 mm Driving motor 45 kW Connected load 100 kW Current consumption 200 A Tying system 5-fold vertical, fully automatic, the press stamp is prepared for an additional 3-fold horizontal binding Throughput rate at a bulk weight of 30 kg/cbm approx. 13,6 tons/hour bulk weight of 50 kg/cbm approx. 24,2 tons/hour bulk weight of 100 kg/cbm approx. 36,4 tons/hour bulk weight of 150 kg/cbm approx. 54,7 tons/hour Bale weight up to 600 kg, depends on material Volume hydraulic oil tank 1,250 l SPS controller Siemens S7 1500 Operating panel Siemens SIMATIC HMI TOUCH Transport dimensions of press 10,000 x 2,800 x 3,385 mm (l x w x h) Press height set up with feed chute 4,743 mm Press height with conveyor belt 7,123 mm Machine weight baler approx. 29 tons Noise level <85 dB (A) Gsdpfju Thcvsx Ag Tebg Condition of the baler: With 2,658 operating hours, the press is almost as good as new and in very good condition, has hardly any signs of wear and is ready for immediate use. Due to larger material input quantities, the pressing force and throughput of the machine no longer meet the customer's current requirements and is therefore being replaced by a new 120 tonne baler. Only the baler is for sale, without conveyor belt and wire drawing stations. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1988, operating hours: 1 h, machine/vehicle number: V 516, total width: 2,000 mm, total length: 7,000 mm, total height: 1,800 mm, operating pressure: 300 bar, pressing force: 90 t, sheet thickness aluminum (max.): 5 mm, power: 11 kW (14.96 HP), empty load weight: 16,000 kg, cutting force: 90 t, year of last overhaul: 2025, Bale size 400x400 mm Force 1 Step 900 KN Force 2 Step 900 KN Steel max. 2500-3500 Kg/Std. Aluminium max. 2000 - 3000 Kg/Std. Driving Power 11 KW Arrangement Surface 7x2x2,5 m x m Gjdpfx Aslhqd Rog Tobg Machine weight 16 to Place: Austria Aviable: 30.01.2025

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Gsdsvf E Avspfx Ag Tobg Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Gsdjxy Rddjpfx Ag Tsbg

Condition: new, Year of construction: 2025, Minimum requirements for the forklift: 4 wheels; at least 2 tons lifting capacity; an additional oil channel available; fork length not less than 1200 mm; fork cross-section: maximum width 150 mm, maximum thickness 60 mm; minimum fork spacing: 700 mm. Gsdpfx Aexy N Dpog Tjbg

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Gbodpfxjxy Nkpo Ag Tsg

Condition: repair required (used), Year of construction: 2000, operating hours: 10 h, functionality: not functional, Place: Austria Gsdpfx Agoxy I I Ts Tjbg Available immediately

Condition: like new (used), functionality: fully functional, Z1015201800 Z1010880270 etc. Gsdpfx Aexy I D Ujg Tobg

Condition: like new (used), functionality: fully functional, RMVI-3030-1-015 RMVI-3030-1-014 RMVI-3030-1-013 RMVI-3030-1-012 RMVI-3030-1-011 Godjxy Imispfx Ag Tobg MR-2002-4-27

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Place: Austria Available immediately Gjdpfx Aexy Iiksg Tjbg

Condition: ready for operation (used), Year of construction: 2011, operating hours: 180 h, functionality: fully functional, Place: Austria Available immediately Gbjdpfxexy Idhj Ag Teg

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Force Presscylinder: 6000 KN Steel, Gush: 16 to/h Aluminium: 6-8 to/h Driving Power: 2x22 kW Arrangement Surface 7,1x3,3 Machnie weight: 51 to Place: Austria Available immediately Gjdpfx Agjxy Hbxe Tsbg

Condition: like new (used), Year of construction: 2001, functionality: limited functionality, Hauptabmessungen 2965 × 1000 × 570 mm (ohne Dreheinrichtung) Gesamtgewicht 2 595 kg (ohne Dreheinrichtung) Gbjdpexy E Sijfx Ag Tsg Betriebsdruck 100 bar Zylinderduckkraft 380 kN Betriebsdruck max. 160 bar Zylinderduckkraft max. 610 kN Maulöffnung ca. 300 × 300 mm Schneidleistung Rundstahl Ø 75 mm; Quadratstahl 65 × 65 mm; Rohr AD 273 × 16 mm; IP-200, C-280, L-220 Schneidmesser beidseitig verwendbar Schnittspalt einstellbar Dreheinrichtung Verdrehen über Ölmotor und Kettentrieb

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, conveyor belt length: 2,500 mm, conveyor belt width: 900 mm, conveyor belt speed: 4,000 mm/s, total width: 1,560 mm, total height: 2,500 mm, overall weight: 700 kg, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 16 A, Equipment: documentation/manual, emergency stop, Inside width: 430 mm Inside depth: 550 mm Gsdpefhxagefx Ag Tobg Length: 7300 mm Driving power: 15 kW Driving Speed: 38 1/min Operating voltage: 3 x 400 V AC + PEN, 50 Hz

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Gbodpfjxy E H Hjx Ag Tsg Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Cycle time: 10 sec. Gbedjxy E Evspfx Ag Teg Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz