Used Closure Mould for sale (2,597)

Condition: good (used), Code: 0234 Pjdpfjxukguex Ab Togu Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall dimensions mm 4800 x 1650 x 1450 h Weight kg 3000

Year of construction: 2021, condition: used, Clamping force: 2700kN, injection volume: 500cm³, injection pressure: 3500bar, EUROMAP size: 2700-1750, rated power: 22kW, weight: approx. 10.7t, nozzle contact force: 58kN, total current: 138A, upstream fuse: 160A, max. short-circuit current: 10kA, enclosure type (UL): 1, hydraulic motor operating hours: 730h, hydraulic pump (clamping force): 65h, operating system active: 3,360h, was regularly maintained, is in well-maintained condition, an on-site inspection is possible. Pjdjz Ekdljpfx Ab Tegu

Year of construction: 2018, condition: used, Clamping force: 900kN, screw diameter: 30mm, L/D ratio: 22, specific injection pressure: 1540bar, calculated shot volume: 88.4cm³, max. shot weight (PS): 80.4g, tie-bar spacing (H×V): 470mm/420mm, min. mold height: 225mm, max. platen distance: 700mm, opening stroke: 475mm, ejector stroke: 150mm, ejector force: 41.2kN, control system: UNILOG B8, weight: 4200kg. Documentation available. An on-site inspection is possible. Pgedpfx Asz Hn Speb Tsu

Condition: ready for operation (used), Year of construction: 2011, operating hours: 32,000 h, functionality: fully functional, clamping force: 2,100 kN, screw diameter: 50 mm, clearance between the columns: 580,580 mm, injection weight: 402 g, opening stroke: 690 mm, installation height: 340 mm, Incl. Geiger robot Midiliner F 10.0 year 2011, Conveyor and safety cage Pgjdps Aarbbefx Ab Tou

Condition: used, Year of construction: 2019, Number of spindles 6 St. Working width 230 mm Working height 150 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 6-24 m/min. LEADERMAC Type LMC 623 COMPACT Four-Sided Moulder ----- Sold on behalf of a client! Pgedps Adfctofx Ab Tju Working width (min. – max.): 15 – 230 mm Working height (min. – max.): 10 – 150 mm Width and height are motorized/controlled 6 spindles, spindle diameter 40 mm, 6,000 rpm Spindle configuration ----- Spindle 1: bottom Spindle 2: right Spindle 3: left Spindle 4: top Spindle 5: top Spindle 6: bottom Technical specifications provided by the manufacturer – no guarantee!

Condition: good (used), Year of construction: 2013, operating hours: 71,000 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, total length: 4,400 mm, total width: 1,900 mm, total height: 2,000 mm, overall weight: 5,280 kg, warehouse no.: 503728 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2013 operation hours: 71000 h technical data clamping unit clamping force: 1000 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 637 x 637 mm Pgjdpfx Absz Eaumo Tou min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm ejector stroke: 175 mm ejector force: 40 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 760 kg technical data injection unit screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar screw length: 20 l/d screw stroke: 150 mm screw torque: 380 N plasticising rate: 20 g/s PS injection rate into the open: 113 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 4.4m x 1.9m x 2m total weight: 5280KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine incl. Handling Anti vibration mounts mould heating 6x technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift 6 kg year of construction: 2013

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle Pgjdpswm Iy Eofx Ab Tou The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Year of construction: 2012, condition: used, A Sabal backpart moulding machine for shaping shoe counters and heel areas is offered. Hot activation stations: 2, cold pressing stations: 2, quick-change device for pads and lasts, pincer pull device: adjustable with millimetric precision, pincer pull at activation and pressing stations, valve monitoring, mechanical stops at the pressing stations, switchable heated pressing station for processing Lefa counters, flanging function. Weight: approx. 600kg, machine dimensions X/Y/Z: approx. 1760mm/800mm/1750mm. Documentation available. An on-site inspection is possible. Pgodpszvghwsfx Ab Teu

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, Pgjdpfeu Udd Sox Ab Tsu spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm Pjdpsw S Ewqjfx Ab Tegu • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: used, Year of construction: 1969, Used Machine Year of manufacture: 1969 Features and technical specifications: - Working width: max. 170 mm; planing head: 125 x 170 x 35 mm Psdpfo Ad Rn Isx Ab Tjgu - Working height: max. 130 mm; planing head: 125 x 130 x 35 mm - 1st shaft: bottom, 3 kW - 2nd shaft: right, 3 kW - 3rd shaft: left, 4 kW - 4th shaft: right, 4 kW - 5th shaft: top, 4 kW - Feed speed: continuously adjustable from 5 to 40 m/min

Condition: good (used), Year of construction: 2011, operating hours: 59,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 30 mm, clearance between the columns: 270 mm, injection pressure: 2,000 bar, total length: 3,180 mm, total width: 1,430 mm, total height: 1,850 mm, overall weight: 2,110 kg, warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm Pedpfx Absz Eax Es Togu injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen text german screen text german core pulling hydraulically 1x Anti vibration mounts

Year of construction: 1999, condition: used, Clamping force: 8,000kN, operating voltage: 400V, mains frequency: 50Hz, power supply: three-phase AC, 3 phases, total rated current: 400A, max. motor current: 205A, upstream fuse protection: 2x200A, an on-site inspection is possible. Pjdpfxe Ad Nn He Ab Tjgu

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1510 x 1370 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 48 kN Injection unit: Screw diameter 80 mm Ls/D ratio 22,5 Injection pressure 2205 bar Stroke volume 1810 ccm Shot weight (PS) 1647 gr. Injection rate 498 ccm/s Screw speed 195 1/min Plasticising rate max. 106 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Pgsdpfx Absz N E Eyo Tju Installed heating capacity 44 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,50 x 3,00 x 2,70 m Total machine weight 35000 kg Accessories: - Anti vibration pads - 10-fold water regulator - Krauss Maffei Robot LRX250 X: 900 mm Servo Y: 1000/1000 mm Servo Z: 3500 mm Servo C: 0 - 90 ° Additional Options: - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Robot interface according to Euromap 67 - 6 x hydraulic sequentional valves - 12 x hotrunner controller - 1 x Air valve

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Good morning, I am offering for sale a Felder F900Z Z vertical milling machine. The machine is in VERY GOOD condition – it has been used less than it has been idle. It is a solid machine, ideal for precise woodworking. Its condition is visible in the photos, and it is ready for use – with no hidden defects. Pgedoz R R Ttjpfx Ab Tou Please contact me via WhatsApp: 783-547-702.

Condition: good (used), Manufacturer: DEMAG Year of manufacture: 1995 Machine number: 878-0140 Operating hours: h Type: Ergotech 250-1450 system Control system: NC4 Screw diameter: 60 mm Displacement: 763 cm³ Injection weight: 690 g Injection pressure: 1,905 bar Clamping unit: Clamping force: 250 t Holding force: 275 t Opening stroke: 675 mm Minimum/maximum tool mounting height: 330 / 710 mm Ejector stroke: 200 mm Ejector plate dimensions: 950 x 950 mm Tie bar spacing: 630 x 630 mm Plate distance: 1,385 mm Condition: good, ready for operation Equipment: 4 core pulls Handling: Robot System DR 322 Travel ranges x – y – z: 800 x 1,600 x 3,000 mm Heater connection: 27 kW Podpfx Ae Aaz Tasb Togu Screw drive connection: 35 kW Weight: 13.5 t Dimensions: 6,400 x 1,900 x 2,300 mm

Year of construction: 2017, condition: ready for operation (used), Clamping force: 1800kN, max. opening stroke: 750mm, min. mold installation height: 300mm, screw diameter: 40mm, L/D: 20, G4 S10, clear tie-bar spacing: tie-barless, max. stroke volume: 220cm³, injection rate: 223cm³/s, max. injection pressure: 1930bar, material barrel: M9 (bimetallic barrel), length: 6455mm, height: 2100mm, weight without mold: 13.7t, operating hours: 59,947h, with documentation. Available from December 2026, an on-site inspection is possible. Psdpfxjztzqzs Ab Togu

Condition: like new (used), Year of construction: 1998, functionality: fully functional, Swivel spindle milling machine VEMA TFMS 2-4 in very good condition, like new; the machine comes from a correctional facility and has only been idle for the past few years; it has been used very little and operated by only one person. VEMA is a company from Northern Germany; the machine's design is similar to the KÖLLE F45 or the PANHANS 240. everything functions perfectly all bearings and guides are in good condition year of manufacture 1998 the machine has the control panel on top with a milling stop that can be adjusted on one side or completely in depth; this is possible with a handwheel in each case. For complete adjustment, there is a mechanical counter; the counter can be set to zero at any point by pressing a button, allowing the stop to be adjusted quickly and very precisely. both stop jaws can also be adjusted individually; there are also 2 mechanical counters, which allow for one-sided adjustment and also enable facing operations, for example, on a gluing profile. the milling stop can be rotated on the machine table the machine has an extra-powerful motor with 7500 watts with pneumatic spindle locking the chips can be removed very well, with 2 extraction ports 120mm with a 30mm spindle that can be adjusted steplessly from -10 to 45°; the spindle is adjusted by handwheel with a mechanical counter. Pgodo Afaugjpfx Ab Tju with right/left rotation we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros; this means you have no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. with a large table opening that can be reduced by means of various rings; this means that milling cutters with a very large diameter can also be used, and you can also mill safely with small milling cutters (the rings are included, but they are not visible in the pictures). with 3000, 6000, 4500, 7500 and 9000 rpm the spindle height adjustment is also done by handwheel; here too, there is a very precise mechanical counter for reading the height. the table is made of highly ribbed cast iron with an interchangeable spindle (a 40mm spindle can also be used) very robust and durable design; the machine was built for the most demanding milling operations and is suitable for all milling operations. optimal power transmission through belt drive with instruction manual with 3-roller feed HOLZ HER ETX the feed has right/left rotation; the feed rollers are individually mounted and all are like new; it has 8 speeds the machine table is 1020mm wide and 980mm deep + 500mm wide extensions on the left and right the machine can be used immediately 380V, 7500W Weight: approx. 1000kg with all necessary safety devices; the machine is approved by the Holz-BG (German Wood and Furniture Employers' Accident Insurance Association). the machine weighs approx. 1000kg with motor protection switch against overload professional equipment, not cheap hardware store junk optimal, simple, fast and safe handling

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Type: KM180-750 AX All Electric Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Further information: 👉 Fully electric machine offering maximum precision, lowest energy consumption and highest process stability his machine belongs to the proven AX series from KraussMaffei, known for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial parts. Key features: * Solid and durable construction for long-term operation * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial use * Good availability of spare parts The machine is equipped with a KraussMaffei linear robot (LRX-S100), which allows efficient and automated part handling, increasing productivity and reducing cycle times. Podew E E Evjpfx Ab Tjgu Thanks to its well-balanced performance and flexibility, this machine represents a very attractive solution for both technical parts and series production. The machine was manufactured in 2011 and appears to be in good working condition, as shown in the pictures.

Condition: repair required (used), Injection moulding machine, Engel ES 330/85, Used machine Pgodpeukn S Hjfx Ab Tju As shown in the pictures, its working condition is uncertain. Overall dimensions :3100 x 1950 x 2600 mm Weight: 5500 kg Manufacturer: Engel Type: ES 330/85 Year of manufacture: 1997 Electrical data: 380V, 60 A, Contoller cards: Keba PS 244; Keba DO 321; Keba DO 321; Keba DO 321; Keba DI 325; Keba DI 325; Keba DI 325; Keba TT 081; Keba AR 181; Keba PD 242; Keba CU 211

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Pedpfx Ajz Dibmob Tegu Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Pgsdpfx Ajw Rqwtob Tou

Condition: used, Year of construction: 1993, Number of spindles 6 St. Working width 230 mm Working height 160 mm Feed motor 4 kW Dimensions (L/W/H) 4400 x 1800 x 1500 mm WEINIG Unimat 23 Automatic Planing and Grooving Machine For sale on behalf of a customer customer is still working on it, machine can be visited ----- Pjdpfxozz Ai Us Ab Tegu Manufacturer’s Technical Specifications: Working width: 20–230 mm Working height: 6–160 mm Number of spindles: 6 Motor power per spindle: 5.5 kW (7.5 PS) Feed motor power: 4.0 kW (5.5 PS) Spindle speed: 6,000 rpm 3 units, table rollers ----- ----- Planing table length: 2 m 1 adjustment gauge 2 planing heads, 240 mm 3 brake units are defective; these could be reinstalled by an electrician. ----- Additional technical data (former order confirmation) attached ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable sales tax.

Condition: used, A package of six injection moulds for the series production of office organization products is available. The molds can be used to manufacture nestable filing trays, PET filing trays A4-C4, high-gloss and matte PS filing trays, a frame for a 3-tier filing tray unit, and a PET desk organizer. Materials processed: PET, recycled PET and PS. Mold numbers: W23630, W23635, W61014F2, W61015F5, W61019 and W62539. Mold dimensions depending on the mold: 397-570mm × 396-820mm × 369-637mm. Mold weights where documented: 450-1450kg. Average cycle times: 24.4-43.2s. Machine classes previously used where documented: 250t, 275t and 380t. According to the available documentation, the molds are in good condition. W61019 is used exclusively to manufacture the frame for the 3-tier filing tray unit. The molds are sold as a complete package. An on-site inspection of the molds is possible by arrangement. Pgsdpjzyq S Uofx Ab Teu

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Number of spindles: 7 Spindle arrangement: bottom, right, left, top, bottom, top, left Diameter of the dust extraction port: 7x120 mm Adjustable feed rate: 4-24 m/min Feed via universal joints Power supply: 400 V Total power: 17 kW Pgodpfszgup Rex Ab Tsu Overall dimensions: Length: 2550 mm Width: 1050 mm Height: 1200 mm