Used Cnc Corner Cleaning Machine for sale (68,558)

Condition: good (used), Year of construction: 2014, Technical data shown on photos. Csdpsufp Svofx Ak Ajri Parts shown by hand not come.

Condition: like new (used), Year of construction: 2021, operating hours: 5,100 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,175 mm, controller model: Heidenhain 640 control, overall weight: 37,500 kg, spindle speed (max.): 30,000 rpm, operating hours of spindle: 5,100 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 120, We offer in good condition Grob G750 Gen1 from 2021 with only 5100 spindle hours. X-Axis travel: 1000 mm Y-Axis travel: 1100 mm Z-Axis travel: 1175 mm Cods Af Uxujpfx Ak Asri With following options: HSK-A63 120 tools ATC 30.000 RPM Spindle Internal coolant 80 bar Touchprobe Heidenhain TS460 Blum Laser Kinematic quick set including LANG Vices

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system Cjdpfoy N Du Djx Ak Aori - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, Crsdpfx Akjw Sgm Ho Aoi (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Condition: used, Year of construction: 1999, A vertical CNC machining center is offered. Heidenhain CNC control. Equipped with: Tool magazine with tool changer, chip conveyor, enclosed work area with safety doors, separate CNC control panel. Weight: approx. 13000kg. The machine is defective and therefore in need of repair. Viewing possible by appointment. Cjdpfx Ake Agn Nwe Ajri

Condition: used, Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture 2017 – including software & accessories For sale is a high-quality Mitutoyo QS250Z CNC Vision Measuring Machine from 2017, in very good condition. It is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: 2D coordinate measurement Contour and profile measurement Measurement of distances, radii, angles, and diameters Measurement of holes, grooves, edges, and complex geometries Serial measurements with automated measuring programs Documentation and report generation via Mitutoyo software Measurement is performed non-contact using a high-resolution camera system with image processing. Ideal for sensitive or small components where tactile measurement is not suitable. Thanks to CNC control, automated measuring sequences are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: Crjdpeynkbajfx Ak Aji 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Height: approx. 1,100 mm Weight (approx.): approx. 150–200 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) Mitutoyo QS250Z main unit Joystick box Software package: QS-ConfigDisk QSPAK FORMTRACERPAK-AP MiCAT Vision / Form Manuals & documentation Various electronic circuit boards (see images) Other accessories as shown (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2007, -no machining tool required -spindle replaced in 2018 -NUM control system replaced in 2019 -machining dimension X: 5500 mm -machining dimension Y: drilling 1440 mm / milling 1780 mm Codpfx Akoz Ehvro Ajri -safety device: bumpers / safety guards -automatic central lubrication via CNC control -central extraction system -rear tool magazine HSK 63 with 24 positions -chip conveyor -TV-Morbidelli table with 10 supports, L=1500mm -vacuum cups, approx. 15 pcs, X=145/Y=145/H=50 mm + approx. 8 pcs, X=145/Y=55/H=50 mm -positioning aids on Morbidelli table -vacuum cup positioning via laser -vacuum pump 250 CBM/H -drilling head speed adjustable via machine inverter -CNC control with PC Office -prepared for remote service -drilling unit with 30 spindles and 4+2 horizontal spindles -base for vacuum cup mounting on support rail Storage location: Nattheim

Condition: used, CNC Machining Centre – Pertici FC1000, Year 2018 The Pertici FC1000 is a high-productivity CNC machining centre for PVC profile processing. It automatically loads, positions, machines and unloads profiles, ensuring fast and efficient production. Equipped with 7 machining spindles and an automatic screwdriving unit, it performs all machining operations in a single cycle. The machine is controlled by Pertici CNC software, compatible with the main production management systems, and features an automatic magazine for up to 10 bars with a maximum length of 6,100 mm, processing profiles from 35 to 130 mm wide. Main Features 7 machining spindles Integrated automatic screwdriving unit Automatic magazine for up to 10 bars Fully automatic loading and unloading Pertici CNC software Automatic profile handling and positioning system Heavy-duty industrial frame Soundproof safety enclosure Technical Data Cedpfx Ajzg Eggek Aeri Installed power: 6.8 kW Power supply: 380 V three-phase Frequency: 50 Hz Air pressure: 6.5 bar Weight: 1,490 kg Maximum bar length: 6,100 mm Profile width: 35–130 mm Available for immediate delivery from October 2026.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10544 Manufacturer: DECKEL Type: KF 2 Crsdj Ahmu Espfx Ak Aoi Year of construction: 1990 Type of control: N/A Control: N/A Storage location: Halberstadt Country of origin: Germany Power Capacity: 1,6 / 2,0 kW Tool Taper: 20 mm Ø Space requirements: 1600 x 1350 LxWxH (mm) Feed rate: 0-350 mm / min Vertical portal passage, clamping table - lower beam cross member: 300 mm Distance table - spindle nose with vertical milling spindle: 50 mm Distance table - spindle nose with horizontal milling spindle: 450 mm Machine Height: 1950 mm Weight: 2,1 t Pre-milling spindle: 80...1000 min-1 Collets: 20 O taper bushing: Morse 1 Touch lift: 12 O Speed of the milling motor: 1400 RPM Further information: - Optical testing device - Pre-milling spindle - Model milling device - Rotary table - Inclined spindle - Mirror image milling device - Reduction and enlargement device - Roller engraving devices - Machine vice hydraulic clamps - Auxiliary clamping table - Dividing head - Tool cabinet - Clamping claws - template bars - articulated light The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. Csdpfx Ajyy S Uask Asri The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Cedpfx Aezl Ap Njk Asri

Condition: used, Year of construction: 2013, A versatile and flexible NC controlled machining centre suitable for a variety of machining operations including hinge recessing, lock slots, handle holes, key slots and euro grooves etc. Programming is extremely simple thanks to the colour graphic touch screen controller using pre-installed electronic macros. As standard the machine is equipped with one milling head that automatically moves for either vertical or horizontal machining. It also has interpolation of the axis. Specification Axis capacity - X 2800mm, Y 180mm, Z 150mm. (2400mm X capacity when optional drilling head fitted). Codpozzwg Uefx Ak Asri 1 x ER32 collet for milling cutter 16mm max. dia. Max working table dimensions - 3000x618mm X axis positioning speed 35m/min. Y axis / Z axis positioning speed 6m/min. Retractable pneumatic positioning stops 2 off - on front of table Adjustable pneumatic workpiece clamps x 3 - mounted on rear of table. Left hand side ref. stop. Front table extension supports x 2 Router motor power 3.3kw. Router motor RPM 0-18,000 rpm. Touch screen controller - Elco Power 1000. Dust extraction outlet x 1 80mm dia, 2 x 100mm dia CE side and rear safety guards with front light curtain. With following options fitted : - Pneumatic tool change ISO 30 - Drilling unit with ER25 collet. - Extended Y axis stroke 400mm - Increased clamping capacity 200mm. Year - 2013 CE Compliant Serial Number - 22170

Condition: used, CNC turning machine MONFORTS, Type RNC 300 MultiTurn with powered tools and Y-axis Year of manufacture 2005 CNC control FANUC Series 18i-TB Turning diameter over bed slide cover 380 mm Spindle bore 67 mm Spindle speed 25 - 5000 rpm Tool turret 12 stations Tool holder, cylindrical VDI 30 mm Motor power, spindle drive 23 kW Total power consumption 41 kVA Mains connection 400 volts, 50 Hz, 63 amps Crsdpfx Akozfau Aj Aei - hydrostatic guides for the X, Y and Z axes - with tailstock - main spindle with chuck and collet chuck system - 3-jaw chuck SCHUNK ROTA NCD Ø 165 mm with a large number of chuck jaws - collet chuck system HAINBUCH 65, without collets (only one collet as a sample) - 25 tool holders VDI 30 - 4 powered tools with collet ER 25 - chip conveyor with integrated coolant system - approx. 20,000 operating hours Machine footprint with chip conveyor L x W x H approx. 4100 x 2600 x 2100 mm Footprint of the base machine L x W x H 3000 x 2400 x 2100 mm Weight approx. 6 tons very good condition

Condition: used, control: Heidenhain TNC 155 tool taper: SK 40 quill stroke: 110 mm table size: 1000 x 500 mm Crodec Tt Hrspfx Ak Asi travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm accessories: angle table, coolant equipment, div. retainers

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Credpfjx A Eupox Ak Asi Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Codpfxoy Edqqo Ak Aori Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, Eckenrundstossmaschine - Corner Rounding Machine Polygraph Y6R Serial-No. 246292 Gerdes Messer / Straight Knife Stapelhöhe max. 55mm Hub 65mm Handhebel / Table model Manual Operation Cods Agp Aajpfx Ak Ajri Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Eckenrundstossmaschine - Corner Rounding Machine Kolbus EH Serial-No. 294203 Crodpe Agpz Sefx Ak Aei Rundes Messer Nr. 11 / Round Knife No. 11 Stapelhöhe max. 55mm Hub 65mm Handhebel / Table model Manual Operation Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2003, Sub-spindle, Y-axis, B-axis, C-axis SIEMENS 840D ShopMill Turning diameter max 246mm Turning length -445mm Spindle speeds main & sub-spindle -6'000 rpm Turret head: 12 driven positions B-Axis 440 mm Tool presetting device Tool catching attachement Crsdpfx Aez Iaqgjk Aoi Misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Credpfxjyymz Uo Ak Aoi Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: used, total height: 2,700 mm, total length: 9,000 mm, total width: 3,400 mm, Year of manufacture: 2014 Colour: White Empty weight: 4.500 kg - Machine available from: 2026-03-30 - Year: 2014 - Documentation available: Yes - CE certificate present: Yes - Serial number: AA1/017825 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: SCM Maestro - Safety feature: Enclosed fence, Safety light curtain - Vacuum pump present: Yes Crodpex Hwhxefx Ak Aoi - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: VTLF 2.250/0-791 - └ Year of manufacture: 2014 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Vacuum pressure [bar]: 200 - CNC options: Manual control - CNC documentation available: USB stick - Working range X [mm]: 5200 - Working range Y [mm]: 1550 - Z-axis working range [mm]: 160 - Installed length [mm]: 9000 - Installed width [mm]: 5000 - Installed height [mm]: 3100 - Transport dimensions: 9000mm x 3400mm x 2700mm (l x w x h) - Transport weight [kg]: 4500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2026, max. workpiece length: unlimited max. workpiece width: 990 mm Panel thickness: 10 - 60 mm Drilling head: 20 spindles (12 vertical + 8 horizontal) Milling unit: 6-position tool changer Codpfx Akjyl Tibj Ajri Tool changer: 6-position tool changer Units: 16-spindle drilling head Dimensions (LxWxH): 2200 mm x 1600 mm

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Crjdpfxo Adzl Rj Ak Asi CONTROL Control system: Deckel Contour 12 WORK AREA Table dimensions: 800 x 480 mm Number of table slots: 7 Travel range X-axis: approx. 400 mm Travel range Y-axis: 400 mm Travel range Z-axis: 400 mm TOOL HOLDER Tool holder: SK 40 MACHINE DETAILS Manufacturer: Deckel Maho Model: FP3-50 Machine type: CNC milling machine Serial number: 2860-151 Operating voltage: 400 V Frequency: 50/60 Hz Rated current: 24 A Length: 3,000 mm Width: 2,400 mm Height: 2,400 mm Weight: 3,000 kg

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 1.300.030.578, functionality: fully functional, overall weight: 5,000 kg, number of spindles: 8, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 8 pcs. Cedpfx Aoz Nivvek Ajri MACHINE DETAILS Voltage: 400 V Power consumption: 35 A Fuse rating: 50 A Empty weight: 5,000 kg Number of transport packages: 3 pcs. EQUIPMENT Documentation available Drilling tool available Tools included CE marking Type of milling table: beam table Material clamping system: pneumatic

Condition: used, Year of construction: 1988, Deckel FP4MA 2204 – CNC Machining Center - General overhaul in 2022 - Heidenain TNC320 CNC control - CNC or manual control possible - Movable vertical milling head with retractable spindle - Counter bearing for long milling arbors - Hydraulic tool clamping - Automatic gearbox - Automatic clamping in the X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct path measurement - Collision protection coupling in the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools, and tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (transverse): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle head: 150 mm Main drive: - Pole-changing three-phase brake motor: Gearbox with right/left rotation - Power: 3.7 / 4.4 kW - Spindle speed: 63 - 3150 rpm (18 steps) - Step jump: 1.25 - Tool holder: SK40 (M16) - Tool clamping: Disc spring pack Credpfxo Adr R Ds Ak Aji - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axis: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table carriage: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Space requirement (with safety area): approx. 2300 x 2500 mm - Machine weight including vertical milling head and rotary table: approx. 1830 kg - Operating voltage: 400 V - Total connection value: 12.5 kVA - Floor load: 3000 kg/m²