Used Cnc Milling for sale (15,474)

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Kjdewzx Ntjpfx Ahyjdg Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.

Condition: good (used), Year of construction: 1989, operating hours: 4,000 h, functionality: fully functional, feed length X-axis: 1,500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (min.): 3,200 rpm, CNC milling machine Reckermann Delta 1300 Kombi with Heidenhain TCN135 Kedpex Tqd Hefx Ahyjdg Year of manufacture: approx. 1993 Spindle hours: approx. 10,000 3 axes, X=1500mm, Y=400mm, Z=450mm travel. Spindle speed: 3200 With horizontal spindle Tool holder: SK50 Coolant-lubricant tank present but currently not connected Various tool holders with assorted tools The machine is in very good condition. It is precise and does everything it should and as expected.

Condition: like new (used), Year of construction: 2019, operating hours: 43,841,500 h, functionality: fully functional, machine/vehicle number: 0030000534A, turning diameter over cross slide: 350 mm, turning diameter: 250 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, rotational speed (max.): 5,500 rpm, bar passage: 65 mm, chuck outer diameter: 225 mm, Equipment: documentation/manual, CNC Lathe DMG Mori CLX350 V4 Year: 2019, Control: DMG Mori Slimline / Siemens Shopturn Kodpfx Ahex Tpwfjyedg Spindle hours: approx. 1500h, Power-on hours: approx. 4500 Including Y-axis and driven tools VDI30 and C-axis Automatic tool measurement on the machine using Tooleye Wedge bar chuck: SMW Autoblock 3-jaw chuck KNCS 225/66 with various jaws Collet chuck: SMW Autoblock Spindle bore: 65mm, Spindle speed: 5000 rpm spindle, 5500 rpm driven tools Double coolant filter Prepared for bar feeder High-pressure coolant pump, 12 bar coolant pressure 6 driven tools, 3x vertical / 3x horizontal 12-position tool turret, all driven. Tool holder VDI30 Various tool holders with different tools

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories Kdjdpfx Ahsfrbtdeysg MARCELS MASCHINEN CH

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm travel -z axis 430 mm spindle speed: 3500 1/min spindle bore 75 mm bar diameter 51 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm Kdedettckmjpfx Ahyjg diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (1x radial + 1x axial in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door - chip conveyor

Condition: used, Year of construction: 2004, Deckel Maho DMU 70 eVolution Year of manufacture: 2004, Operating hours: 68,400 h, Spindle hours: 25,024 h Heidenhain TNC 530, SK 40 tool holder, 5-axis swiveling table Travel paths 500 mm x 700 mm, internal cooling, chip conveyor, W + W filter system Filter system also from 2004, model EL-FI 1000, coolant tank capacity 900 l Kdedpstvfpcsfx Ahyjg _____ Our general terms and conditions apply; additionally, the seller is not liable for typographical or data transmission errors. The visual appearance of the offered items corresponds to their age and the pictures shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to businesses and without any guarantee.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC turning center Hardinge Conquest 51T, low hours, year of manufacture 2021, inspection/test run possible at any time Kdsdpfxswtplco Ahysg

Condition: like new (used), Year of construction: 2019, operating hours: 1,600 h, functionality: fully functional, With the EMCO short bar loader SL 1200, EMCO offers the perfect solution for automatic feeding and loading of bars up to a maximum bar length of 1200 mm. Fully operational, in very good condition. Year of manufacture: 2019, only 1,600 operating hours. Technical data for the SL1200: Bar length: 150 - 1200 mm Bar diameter: 8 - 90 mm Feed travel: 1350 mm Max. feed speed: 60 m/min Max. return speed: 60 m/min Bar feed time: approx. 3 sec. Bar changeover time: approx. 10 sec. Material storage: 9 bars with Ø 65 mm or 97 bars with Ø 6 mm Length: 1700 mm Ksdpfx Ahsyabuzsysdg Width: 1100 mm Height: 1200 - 1500 mm Weight: approx. 450 kg

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 50 T Control: Heidenhain TNC426 Spindle speed: 20-9000 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 12000 mm/min Working area X 500mm, Y 400mm, Z 400mm Tool holder: SK40 DIN 69871 Drawbar DIN 69872 Tool changer: 16 positions Max. tool projection length from spindle nose: 290mm Worktable: Manually rotatable and tiltable rotary table Dimensions: 700 x 500mm T-slots M14 Centering bore: 30mm Transport data: Kdsdpfxsx Taq Ns Ahyeg Weight: 3200kg Dimensions (length x width x height): 2.10 x 2.30 x 2.30m

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine Deckel Maho DMU 80 T Kdodpfx Ahex Tapfjyeg Control: Heidenhain TNC426 Spindle speed: 20-6300 rpm Feed rate X, Y, Z: 20-10000 mm/min Rapid traverse X, Y, Z: 15000 mm/min Work envelope: X: 800 mm, Y: 650 mm, Z: 550 mm Tool holder: SK40 DIN 2079 Draw bolt DIN 69 872 Tool changer: 25 positions Max tool diameter: 160 mm Max tool extension from spindle nose: 315 mm Work table: Dimensions: 1100x600 mm T-slots: 9 x M14 Permissible workpiece weight: 500 kg Transport data: Weight: 5800 kg Dimensions (L x W x H): 3.05 x 2.40 x 2.45 m

Condition: used, Year of construction: 2001, Technical details: turning diameter: 33 mm turning length: 330 mm control: 840 total power requirement: 20 kW weight of the machine ca.: 6 t Kjdpfjw D Hh Aox Ahyjdg dimensions of the machine ca.: 3850,2000,2100 m 17 axes 3 revolvers with the powered tools 1 gantry with the driven tools Main and counter spindle with C axes Barfeeder Machine On-time 58,133 hours *

Condition: used, Year of construction: 2003, Technical details: turning diameter: 270 mm weight of the machine ca.: 6,5 t max. swing diameter: 590 mm Kodpfex Dlhljx Ahyodg with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, spindle speed (max.): 2,000 rpm, table length: 4,000 mm, table width: 2,000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS MACH-ID 9328 Make: SACHMANN RAMBAUDI Type: MP-212 HS Control: HeidenHain iTNC530 Year: 2007 KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm Spindle extention L = 600 mm with 2000 Rpm Kodpfjx Nh H Dox Ahysdg 3D Measuring probe MP60 ATC Chain 80 Positions Coolant system 1320 L with 4,8 Bar Rotary indexing table  2000 x 1600 x 15 ton V-Axis (in feed) 1500 mm Rotation 3 U/Min HeidenHein RON 700 encoder for Table rotation Ram size 500 x 500 with 56 kW Chip conveyor  X-Axis: 6000mm Y-Axis: 2000mm Z-Axis: 1400mm Table Length: 4000mm Table Width: 2000mm Table load: 25000 Power on spindle: 37kW Spindle speeds: 2000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 15000mm Width: 8000mm Height: 6000mm Weight: 85000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation Kdsdjxmirgspfx Ahyog - CE marking

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Kedpfxjx Tpyto Ahysdg

Condition: good (used), Year of construction: 2006, Year of manufacture: 2006 CNC control: Mitsubishi MSX-850 X-axis travel (mm): 260 Z-axis travel (mm): 795 Y-axis travel (mm): 100 Swing diameter over bed (mm): ø 920 Swing diameter over cross slide (mm): 742 Upper turret Number of tool stations: 12 Main spindle Max. spindle speed (rpm): 4,000 Spindle drive power (kW): 18.5/15 Spindle bore (mm): 91 Kdjdpfov Egqzjx Ahyog Chuck type: Hollow Chuck (10") Manufacturer: KITAGAWA Tailstock Tailstock travel (mm): 734 Taper: MT3 Equipment Chip conveyor Signal light High-pressure pump Foot switch for chuck or collet system Interface for bar feeder Basic machine: Dimensions/Weight Length (mm): 2,620 Width (mm): 1,898 Height (mm): 2,200 Weight (kg): 6,140

Condition: like new (used), Year of construction: 2013, Machining with diamond tools at feed rates up to 3 mm/min and unit costs up to 56% lower than electrical discharge machining. Maximum travel distance on the X-axis: 200 mm Maximum travel distance on the Y-axis: Kdodpfx Asx Tpibohyeg 400 mm Maximum stroke on the Z-axis: 280 mm Control and software options: SIEMENS

Condition: like new (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, turning length: 650 mm, turning diameter over cross slide: 350 mm, turning diameter: 385 mm, spindle speed (min.): 4,500 rpm, spindle bore: 67 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, For sale: Used DMG NEF400 V3, 5th Generation ISM 2-axis universal lathe with C-axis. Travel distances: X: 255mm Z: 800mm Swing over bed: 385mm Swing diameter: 350mm Turning length: 650mm Equipment: - Main spindle as integrated spindle motor - Max. spindle speed: 4,500 rpm - Drive power: 8.0/11.5 kW (100/40% duty cycle) - 12-position VDI30 disc-type turret with 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 mounting, travel: 680mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speeds for vibration-critical setups - Manual tool measurement device in work area - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump: 12 bar, 23 l/min - Chip conveyor with discharge height of 1,250mm, discharging to the right Kjdsxzqnrjpfx Ahysdg Bar machining package consisting of: - Workpiece pickup unit with left-side conveyor for parts up to max. 65mm diameter, 150mm length, and 3kg max. weight - Bar clamping device inner draw-tube diameter max.: 67mm - Interface for bar loader magazine - Foot switch for tailstock operation - Hydraulic 3-jaw chuck SMW-AUTOBLOK - RMS sensor (Relocation Machine Security) Machine available immediately! Machine ready for operation! Loading by us included! Transport can be arranged upon request!

Condition: like new (used), Year of construction: 2011, operating hours: 9,080 h, functionality: fully functional, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel axes X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: - Tool turret: 12 stations, all powered - Driven tool speed: Max. 10,000 rpm - Parts catcher - Electrical connection: 400 V - Power consumption: 37.6 KVA - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Sub-spindle chuck: Kitagawa B206A521F - Swing diameter: 366 mm - Turning length: 705 mm Kdodpfx Ahsxzqhreyeg - Spindle bore: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Main spindle power: 18.5 kW - Sub-spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manually deployable measuring arm for sub-spindle - Short bar loader, manufacturer: LNS - Includes tools: 8 fixed tools, 3 driven tools - Includes extraction system, brand: Indusa - Includes complete documentation Machine available immediately! Machine has been fully cleaned and inspected! We will undertake loading of the machine! Transport can be organized upon request!

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Kdedpfx Ajxzq Ncjhyeg Loading will be handled by us! Transport can be organized upon request!

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm Kedpfx Aex I A Hcohysdg • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 401932 in 401950, spindle bore: 42 mm, bar passage: 42 mm, For sale: 2 INDEX ABC 42 machining centers, year 2004, each equipped with an FMB automatic bar feeder. The lathes feature two turrets (both with live tooling) and a counter-spindle. Spindle bore diameter: Ø42 mm. Both machines are additionally equipped with powered secondary finishing tools. The machines come with a large amount of extra equipment. Both machines have been regularly maintained and are in very good condition. Kdjdpfx Ahsyahixeyeg One machine has a completely overhauled synchronous spindle – the price for this unit is €30,000. The price for the second unit is €25,000. If both are purchased together, the total price is €50,000.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: R7A V09, spindle bore: 65 mm, bar passage: 65 mm, For sale: two CNC machining centers EMCO HYPERTURN 665, year 2005, complete with bar feeder. Lathes equipped with two turrets (both with driven tools) and counter spindle. Spindle bore Ø65 mm. Kodpfx Aoyahilshysdg Includes a large amount of additional equipment (tool heads, driven tools, etc.). Machines have been regularly maintained and are in good condition. Price of machine with FMB bar feeder: €23,000. Price of machine with Hydrobar bar feeder: €20,000. If both are purchased together, the total price is €40,000.

Condition: good (used), Year of construction: 1994, For sale is a complete, fully CNC-controlled planing mill. The planing mill can be inspected while in operation. A tour and training session prior to dismantling is available upon purchase. The mill has been in reliable operation since 1981 and has always been professionally maintained. The mill was used exclusively for the production of wainscoting and parquet (panels). Reason for sale: New construction of a complete planing mill. Equipment: 1. Stacking unit 2. Rupa vacuum lifter - Age: approx. 1.5 years 3. Cross conveyor 4. Canali band saw - 2 band saws 5. Longitudinal/cross conveyor including roller conveyors 6. Costa planer with 10 spindles Kdedpfx Ahjt Ngwroyog - Fully CNC-controlled Spindle configuration: 1 spindle horizontal 2 lifting spindle right vertical 3 lifting spindle left vertical 4 lifting spindle horizontal 5 lifting spindle right vertical 6 lifting spindle left vertical 7 lifting spindle top horizontal 8 lifting spindle bottom horizontal 9 lifting spindle bottom horizontal 10 jointing spindle bottom horizontal 7. Roller conveyor with discharge 8. Roller conveyor to the Büttfering sanding machine 9. Cross and longitudinal conveyor 10. Büttfering sanding machine - Working width: 1100 mm - 3 units: 1x combo 1x single 1x brush 11. Lifting platform Viewing and contact: The planing mill can be viewed during operation. Schedule a viewing to get an idea of the system before dismantling. Seize the opportunity to purchase a fully functional planing mill!

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC long turning lathe Doosan Puma St20G Year of manufacture 2012 Bar feeder FMB turbo 3-26 Kdodpfxswtg Dij Ahyog Chip conveyor