Used Cnc Turning Centre for sale (16,838)

Condition: used, MAZAK QTN 100II MSY, manufactured in JAPAN, year 2009 Max. turning diameter: 280 mm Spindle max. speed: 6000 rpm Two Hainbuch collet chucks mounted on the spindle Spindle bore: 45 mm 12-station turret Counter spindle max. speed: 6000 rpm Tool probe Part catcher Bar feeder interface Axis travels: X: 185 mm Y: 100 (+/- 50) mm Z: 455 mm W: 460 mm Included with the machine: - 8 standard tool holders Hnjdpfxjzrkztj Af Asr - 4 powered tool holders (2/2) - Documentation - Chip conveyor

Condition: used, Year of construction: 2016, max. workpiece length 4500 mm profile spindle 1 Stück main drive 19,2 kW Hedpfxjzn Ahws Af Aonr

Condition: used, CNC turning machine TRAUB, Type TND 400 Hodszacwdopfx Af Aenr Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: excellent (used), Year of construction: 2008, operating hours: 10,960 h, functionality: fully functional, machine/vehicle number: 01.01.0575, Equipment: documentation/manual, Double-turret CNC lathe (TT type) with a sub-spindle, Dossan Puma TT1800 SY model, featuring various motorized turrets, a center distance of 980 mm, a maximum diameter of 230 mm, a maximum working length of 230 mm, and a bar work diameter of 65 mm, with a bar feeder capable of handling round, square, and hexagonal bars, and a chip extractor. Manufactured in 2008, the machine is in very good condition. Hnedpfx Ajztz Erof Aer

Condition: excellent (used), Year of construction: 2006, operating hours: 37,245 h, functionality: fully functional, machine/vehicle number: 188270, Controller: Mazatrol Matrix Includes: Motoman Robot ES165-D100 – Payload 100 kg Max. machining diameter: 760 mm Max. machining length: 1524 mm Main spindle (new in 2023): Chuck size: 12 Max. speed: 3300 rpm Motor output: 30 kW / 40.0 hp Milling spindle: B-axis travel: 225° Magazine capacity: 20 Max. speed: 12000 rpm Motor output: 19 kW / 25 hp Feed axes: Travel: Hnedpfjztb D Usx Af Ajr X = 630 mm Y = 230 mm Z = 1585 mm Fully integrated Z-axis main and sub spindle

Condition: used, Year of construction: 2011, Doosan CNC lathe, Puma 2100MS Year of manufacture: 2011 Includes chip conveyor Location: Bad Tölz Hodpfxezudn Es Af Aenr Inspection is welcome. We have other used machines available. Please contact us.

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Hodpfx Ajvt D D Uof Ajnr Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: excellent (used), Year of construction: 2001, Turning length: 1,500 mm Turning diameter: 580 mm Travel range X-axis: 598 mm Travel range Y-axis: 230 mm Travel range Z-axis: 1,660 mm Max. turning diameter: 580 mm; turning length: 1,500 mm; control: OSP 7000 L; greatest pass round over bed: 610 mm; swing diameter over slide rest: 580 mm; main spindle: turning speed range - main spindle: 12 - 2,800 min/-1; spindle bearing diameter: 150 mm; spindle bore: 110 mm; spindle nose: JIS A2-11; power capacity - main spindle: 37 (30) kW; C-axis: 0.001°; axis stroke: x-axis: 598 mm; y-axis: 230 (+110 / -120) mm; z-axis: 1,660 mm; feeds: rapid traverse: C: 100 min/-1; cutting feed speed: X / Z / Y: 0.001 - 1,000 mm/rev; turret: type: H2 ATC; number of tool positions: 80 pos.; driven station: stepless; spindle speed - driven tool stations: 40 - 3,000 min-1; tool shank height: 25 mm; boring bar shank diameter: 50 mm; tailstock: diameter of quill: 120 mm; quill stroke: 170 mm; taper of center: MT 5; tool magazine: tool taper: MAS BT 50; max. tool diameter: 170 mm; max. tool length: 350 mm; max. tool weight: 20 kg. Accessories: 70 pieces of tool holders. Hnodpfx Afjztr Nne Ajr

Condition: new, • Working capacity 3300mm X, 200mmY, 180mm Z • 1 x vertical electro-spindle 7kw with saw • 1 x vertical electro- spindle 7kw 12 – 18000 rpm Hedpfxen Nv S To Af Ajnr • 1 x electro-spindle kw1.7 with point to point vertical / horizontal drilling group • 1 x horizontal electro-spindle 5.6kw 12-18000 rpm • 4+4 work piece holding benches moveable on the X axis/ Each fitted with adjustable pneumatic workpiece clamps • L/H and R/H retractable work piece reference stops • Stand alone electrical control cabinet with hand held remote control for machine set up • Simple parametric programming with 3D working models • Perimeter safety cabin with front doors, vertical operation, synchronised with machine cycle

Condition: good (used), Year of construction: 2019, CNC machine with fixed table and dual drive gantry, five axis interpolating electrospindle. Particularly suitable for SIPS panels, woodworking, plywood, MDF, plastics and thermo formed prodcuts. 6120mm x 1605mm Working field in X / Y axis 6850mm X axis stroke 1970mm Y axis stroke 1080mm Z axis stroke Max height / panel passge 700mm C axis rotation + / - 360 degrees 12kw electrospindle with programmable speeds from 500 - 22,000 rpm 12 Position automatic toolchanger Auxiliary 2 position toolchanger 250m3/hr vacuum pump 2 Field phenolic working table suitable for vacuum cups Hoist points to fix jigs [ series of threaded holes on table for mechanical fixing ] Set of 3 disappearing stops OSAI Series 10 CNC control including [ for example ] PC with Windows XP [ or higher ] Interactive programming Paramteric programming 3D interplolation Cutter radius compensation Extraction requirements 2200m3/hr Weight 5235kg Year - 2019 CE FULL ORIGINAL SPECIFICATION SHOWN IN IMAGES Hnodpfx Afovpv Nbo Aor

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, For sale: Well-maintained EMCO Hyperturn 665 MC Plus with IEMCA Master 880MP-E bar loader, chip conveyor, and high-pressure coolant pumps! Machine was exclusively used for machining brass parts! CNC Turning and Milling Center | EMCO Hyperturn 665 MC Plus with main and sub-spindle, C and Y axes, dual turrets each with 12 driven tool stations! Technical Data: Swing diameter over bed: 600 mm Swing diameter over cross slide: 500 mm Control: Siemens Sinumerik 840D Max. turning diameter: 430 mm Max. turning length: 744 mm Max. bar capacity: 65 mm Travel - X: 270 mm Travel - Z: 750 mm Travel - X2: 205 mm Travel - Z2: 750 mm Travel - Y: 100 (+/- 50) mm Main spindle speed: 0 - 5,000 rpm Sub-spindle speed: 0 - 7,000 rpm Tool turret: 2x 12 positions, all driven! Tool holder: VDI 30 Upper turret: X, Z, Y axes Lower turret: X, Z axes Hedpfx Afexzq Ncj Ajnr Sub-spindle traverse (left/right): Z3 axis C11 spindle: 65 mm diameter (hollow chuck cylinder) C12 spindle: 45 mm diameter (solid chuck cylinder) with part ejector Tool turret type: Sauter 2x 14 bar high-pressure pumps Accessories: Complete tooling cabinet with driven and static toolholders as well as carbide inserts and tool holders Collet chucks for main and sub-spindle Full documentation etc. Machine available immediately! Ready for operation! Loading will be handled by us! Transport can be organized upon request!

Year of construction: 2016, condition: used, Schuco AF300 CNC Profile Machining Centre, 3 Sided Machining of Aluminium & Steel Profiles, 4000mm Bed Length, 18,000 Spindle Speeds, 8 Position ATC, BT30 Spindle Taper, 5 Separately Driven Clamping Blocks, Digital Tool Height Pre Setter, BT30 Tool Rack and Collets. S/No. 9912917 (2016). Country of Origin: Italy Location: These lots are located in Burton-on-Trent, UK. Please see individual lot for loading information and charges. Hsdpfxozqdrio Af Aenr

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Hnjdpfx Afsznmbue Aer

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Hnedpeztducefx Af Asr

Condition: excellent (used), Year of construction: 2004, operating hours: 27,000 h, turning length: 1,070 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,070 mm, workpiece weight (max.): 150 kg, total height: 2,800 mm, total length: 9,000 mm, total width: 5,000 mm, Forkardt chuck, main spindle 250 mm Forkardt chuck, sub spindle 250 mm Chip conveyor Filtration with coolant filtration and paper filtration New main spindle bearing installed in 2022, service life 12,000 hours Machine in excellent condition and fully operational Complete set of manuals and documentation Max. turning diameter: 560 mm X-axis: 485 mm Y-axis: 160 mm Z-axis: 1070 mm B-axis: 240° Spindle bore: 65 mm Spindle speed: 5000 rpm Spindle power: 37 kW Sub spindle speed: 5000 rpm Sub spindle bore: 65 mm Sub spindle power: 37 kW Tool changer: 80 Spindle speed for driven tools: 12000 rpm B-axis interface: HSK63 B-axis spindle speed: 12000 rpm B-axis power: 22 kW Chip conveyor: Yes Tool Eye: Yes Operating hours: 27000 hours Workpiece weight: 150 kg Length: 9000 mm Width: 5000 mm Height: 2800 mm Weight: 14500 kg Hedpfx Aezl Agzsf Aenr

Condition: good (used), Year of construction: 2007, Turning center GILDEMEISTER/DMG Sprint 42 linear with DMG FANUC 160 control, serial number 2601-0386, year of manufacture 2007, operating hours estimated by management at approximately 41,295 hours, chip conveyor, bar feeder FMB Turbo 5-55. Hjdpfx Afsztc Syj Aonr

Condition: good (used), Year of construction: 2006, Turning center SPINNER TC32-MC, control system SIEMENS Sinumerik, hydraulic bar feeder LNS Super Hydrobar, purchased in 2006. Hodpfx Afeztc Hqs Aonr

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 760 mm, turning diameter: 376 mm, spindle motor power: 22 W, spindle speed (max.): 4,000 rpm, overall weight: 6,100 kg, Machine type: PUMA 2600Y Date of installation: 02/2023 Additional tooling: • Capto C3 straight holder: 2x • Capto C3 angle 90° holder: 1x • ER20 collet chuck Capto: 10x • ER32 collet chuck Capto: 4x • Weldon holder Ø20 Capto: 1x • Capto tool rack: 1x • Indexable drill: 1x Ø37 + 1x Ø19.5 Hjdjywllyopfx Af Aenr

Condition: used, Year of construction: 2007, turning diameter 65 mm turning length 150 mm control Siemens 840D spindle passage 75 mm turning length 150 mm c-axis 2x 0,001 ° gripping station 65 mm speeds 5000 U/min rapid traverse 30 m/min turret (x-stations) 3x12 Number of axles 10 St. number of toolholder-holes 36 chip conveyor ja / yes kW coolant filtering unit ja / yes kW Number of working hours 35000 h total power requirement 22 kW weight of the machine ca. 9 t Hsdozdk Evjpfx Af Aenr dimensions of the machine ca. 4,4 x 2 x 2,3 + Iemca m DMG Sprint 64 Linear CNC lathe, built in 2007, 10 axes, 2 spindles, 3 turrets with Iemca Master 880 loading magazine Accessories: a large number of tool holders in total 104 off, 24 of them are driven tool holder

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Hnedpfx Afezh Ndxs Asr Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: used, Year of construction: 2019, operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 12,000 rpm, total length: 4,000 mm, tool holder type of tool turret 2: BT 40, Doosan VCF850 machining center, continuous 5-axis operation, rotary table, Fanuc control. Hodpfxezihg Uo Af Aenr

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: PT20SY0117, total height: 2,500 mm, total length: 4,100 mm, total width: 2,240 mm, overall weight: 12,000 kg, Control: Fanuc 18i - TB Swing over cross slide: Ø800 mm Hedpfx Afezq A Dks Aonr Max. cutting diameter: Ø620 mm Max. turning length: 740 mm Main spindle: speeds 50-5,000 rpm Spindle bore/Spindle nose: Ø76.2 / Ø68 Number of turrets: 12 B-axis: Ø810 mm Rotary tools: speed 50 – 4,000 rpm Rotary tool motor (turret one/turret two): 7.5/5 HP Rapid traverse (X/Z/Y): 790 / 20 m/min Sub spindle rapid traverse: 20 m/min Dimensions: Floor space: L = 4100 x W = 2240 x H = 2500 Machine weight: 12000 kg.

Condition: used, Year of construction: 2002, functionality: fully functional, spindle speed (max.): 3,500 rpm, spindle bore: 91 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 670 mm, total height: 2,100 mm, total length: 4,045 mm, total width: 1,900 mm, spindle nose: 8, overall weight: 6,000 kg, CNC Fanuc 18i - T CAPABILITIES: Max. workable diameter from bar stock: 80 mm Max. workable diameter: 490 mm Max. workable length: 670 mm Max. rotating diameter: 600 mm MAIN SPINDLE: Max. rotation speed: 3500 rpm Spindle nose: ASA 8’’ Spindle bore: 91 mm Inner bearing diameter: 140 mm Chuck diameter: 315 mm Motor power: 22 kW Max. torque: 539 Nm TURRET: Number of positions: 12 Tool shank for external tools: 20 x 20 x 25 x 25 mm Tool shank for internal tools: 32 – 40 - 50 mm Rotation time: (1 position) 0.15 POWER TURRETS: Number of positions: 12 Max. rotation speed: 4,000 rpm Motor power: 5.5/3.7 kW AXES: X-axis travel: 255 mm Z-axis travel: 67 mm B-axis travel: -- mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 24 m/min B-axis rapid traverse: -- m/min TAILSTOCK: Hsdpfjzr N Sdsx Af Asnr Tailstock taper: CM 5 and 4 Automatic B-axis positioning: 660 mm B-axis rapid traverse: 15 m/min COOLANT: Tank capacity: 250 liters Pump nominal flow rate: 120 liters/min Pump motor power: 0.75 kW DIMENSIONS-WEIGHT: Overall dimensions with chip conveyor: 4,450 x 1,900 x 2,100h mm Spindle center height: 1,060 mm Weight with chip conveyor: 6000 kg Machine complete with: • 25 mm Autoblok chuck • 6 fixed internal tool holders • 5 fixed external tool holders • 1 Front tool holder • 4 axial motorized tool holders + 2 radial motorized tool holders • Presetting system • Operating manuals and CE declaration

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, Equipped with DMG MORI M730 UM MAPPS CELOS control system. Year of manufacture: 10/2017, Commissioned: 1/2018 Turning diameter: 356 mm Travel in X: 260 mm Travel in Z: 795 mm Travel in Y: +- 50 mm Spindle bore: 91 mm Main spindle speed range: 4000 rpm Counter spindle speed range: 4500 rpm Driven tool speed range: 10000 rpm Including the following accessories: Work area door with interior lighting 20-position turret with 20 driven stations C-axis, Y-axis Hjdpfx Afezmfxis Aonr Touch probe (Marposs) Counter spindle, parts catcher Workpiece conveyor, workpiece unloader Manual tool presetter (HS) Removable tool presetter (GS) 3-jaw chuck, hydraulic, Kitagawa BB 210 with foot pedal (HS) 3-jaw chuck, hydraulic, Kitagawa B 208 with foot pedal (GS) Bar loader IRCO BREUNING ILS - MUK Various tool holders, 0-40 mm Direct path measuring system, X, Y, Z axes Signal lamp, 4-color Chip conveyor High-pressure coolant system with compact filter unit, 70 bar / 700 l tank Operating manuals

Condition: as good as new (ex-display), Year of construction: 2024, New and unused, 340mm turning diameter, 570mm turning length, Y axis +/- 41mm, 400mm swing, 65mm bar capacity, spindle speed 4,500rpm, 15 station turret, 11/15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, FANUC-i control, tailstock, coolant, tool setter, swarf conveyor, parts catcher, 3 jaw chuck, tooling, Hodpfx Afoziavhj Ajnr