Used Colchester for sale (48)

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Lhjdpjy E S D Eofx Ancjl

Condition: ready for operation (used), lathe Colchester Master Ljdpsd Hdqvjfx Ancehl

Condition: used, Lathe COLCHESTER TRIUMPH 2000 Ledpfx Aozrh Svjncshl

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Lhsdpfsypud Uex Ancsl

Condition: good (used), Year of construction: 1999, All additional equipement from pictures will come. Lhjdpfx Anjww Irijcjl Technical details shown on picture.

Condition: good (used), Year of construction: 2004, Technical details shown on pictures. Lhodeww Haxspfx Ancjl Parts shown by hand not come.

Condition: good (used), Steady rest COLCHESTER Magnum Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhsdpjzcnw Iofx Ancjl

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm Lhsdpfx Anexnqzxocol bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 2-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard attachment jaws Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Switchable lathe chuck guard 2 steady rests Chip guard Coolant device Work light Guideways in good condition without scratches, not worn Machine is in good overall condition with signs of wear commensurate with age. Includes operating instructions Translated with (free version)

Condition: excellent (used), Year of construction: 1999, • FANUC 210i - T control (cycles) • Max. distance between centers: 1,250 mm • Max. turning diameter: 400 / 585 mm in offset • Spindle speed: 12 . . . 2,500 rpm • Spindle bore: 54 mm • X-axis: 210 mm • Z-axis: 1,181 mm • Cutting gap adjustment: 0.05 – 0.8 mm • Motor power: 7.5 kW • Weight: approx. 2,700 kg Ljdpfx Anow S E R Recshl

Condition: excellent (used), Swing over bed 400 mm Distance between centers 650 mm Spindle speeds 0-2500 rpm Ledpeq Dll Dofx Ancjhl Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), functionality: fully functional, turning diameter over bed slide: 335 mm, center height: 165 mm, turning length: 635 mm, swing diameter over cross slide: 210 mm, rotational speed (max.): 1,800 rpm, quill mount: MK 3, three-jaw chuck diameter: 200 mm, For sale is a Colchester lathe in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Colchester • Model: Student-1800 • Distance between centers/turning length: approx. 635 mm • Center height: approx. 165 mm • Turning diameter over bed: approx. 335 mm • Turning diameter over carriage: approx. 210 mm • Max. spindle speed: approx. 1800 rpm • Spindle bore: approx. Ø40 mm • Three-jaw chuck: approx. Ø 200 mm • Spindle nose: 4 in. D.1. Camlock • Tailstock spindle: MK3 • Condition: Used, functional Shipping costs via freight forwarder are possible (please inquire, providing your postal code). International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale ex works 42855 Remscheid, free loading. Errors in technical data and prior sale reserved. Lsdpfxozlcrqs Ancehl

Condition: good (used), Year of construction: 2008, Colchester Harrison Alpha 1400U CNC lathe Footprint: 1.7 x 3.1 m Height: Approx. 1500 mm Weight: 3200 kg Equipment: Electrically interlocked chuck guard, full safety guard, coolant tank and pump 100 l, fully extendable chip tray, machine lighting Machining length: 1250 mm Turning diameter: 400 mm Center distance: 1250 mm Spindle bore: 54 mm Turret, number of tools: 8 Lhsdpfornkdyex Ancel Tool size: Standard: 20 x 20 mm Boring bar: 32 mm No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Colchester / Harrison / 600 Lathes TORNADO 300 CNC lathe TECHNICAL DATA Spindle power: 18 / 22 kW Spindle connection: A2-8 Spindle bore: 90.5 mm Chuck sizes (A type): 265 mm Drawtube diameter: 82 mm Front bearing (inner diameter): 130 mm Max. Spindle speed: 4000 rpm X-axis: 240 mm Travel over center of rotation: 213 mm Under turning center: 27 mm Working stroke Z-axis: 500 mm Feed speeds: Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 20 m/min Min. feed step: 0.001 mm Lsdpernkhysfx Ancehl Tool carrier: Turret, number of tools: 12 Tool holder mounting: VDI 3425 / 40 Turning chisel, shank size: 25 x 25 mm Max. Drill rod diameter: 40 mm Tailstock quill diameter: 95 mm Quill inner cone: No. 5 MK Quill stroke: 125 mm Tailstock travel: 485 mm Max. Tailstock quill axial force: 7860 N Swing diameter: 530 mm Turning diameter over cross slide: 330 mm Max. Machining diameter: 300 mm Max. Turning length: 500 mm Height of turning center above floor: 913 mm Bed width Z-direction: 750 mm Bed width X-direction: 393 mm Bed width tailstock guide: 255 mm Cross slide width: 256 mm Bed slide inclination: 600 mm Installation area: 3.26 m2 Weight: 3300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, machine/vehicle number: 1457, Outer diameter: 205 mm Height: 59 mm Lsdeb Nxhmopfx Ancshl Camlock fitting according to DIN 55029: Size 3

Condition: used, Year of construction: 1992, turning diameter over bed 350 mm turning diameter over slide rest 196 mm turning length 1250 mm turning speeds 3250 U/min Ljdpfx Aneyqvxpocehl bed width 350 mm total power requirement 7,5 kW dimensions of the machine ca. 4x1,5x1,5 m - Accessories available. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Distance between centers: 1,200 mm Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Chuck size: 250 mm Axes: X, Z Lsdszgt Urjpfx Ancshl MACHINE DETAILS Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws

Condition: excellent (used), Swing over bed 360 mm Distance between centers 650 mm Lhsdsrx Rwnepfx Ancjl Spindle speeds 20-3250 rpm Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2004, functionality: fully functional, Colchester CNC lathe Model Tornado T 220 S Year : 2004 Turning lenght : 540 mm. Turning diameter : 290 mm. Sving over bed : 510 mm. RPM : 3500 Spindle borer : 66 mm. Tools in revolver :12 stk. Control : FANUC 21i - TB Lsdpfx Anjy T E Tcecjhl Chuck - Toolholder - Interface RS-232 C - Coolant

Condition: used, Year of construction: 1986, turning diameter over bed:335 mm turning diameter over slide rest:165 mm turning length:635 mm total power requirement:2,2 kW :3 - Achsen - Digitalanzeige :Ø 40 mm :30 - 2500 U/min :D1-4 Camlock 4-jaw-chuck diameter:200 mm 3-jaw chuck:200 mm mm :MK 3 weight of the machine ca.:860 kg dimensions of the machine ca.:1700x1000x1700 mm digital readout:Heidenhain Machine is in good condition. Ljdpfx Aoufud Rjncohl Accesssories like tool holders etc come with the machine

Condition: good (used), Colchester Tornado 100 CNC Lathe - Max. turning diameter: 400 mm - Distance between centers: 500 mm - Bar capacity: 42 mm - Year of manufacture: 1995 - Weight: 2,400 kg - Turret with 12 stations - VDI 3425 / 30 tool holders Lodpfoy Einhox Ancjhl Hydraulic collet and chuck

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS MACHINE DETAILS Electrical Data Voltage: 380 V Frequency: 50 Hz Phases: 3 & N Current consumption: 10 / 16 A Motor Power Main motor power: 12.5 HP Pump motor power: 0.05 HP Total power: 12.55 HP The seller cannot guarantee the following technical data and therefore recommends an on-site inspection! Swing over bed: 535 mm Swing over cross slide: 356–370 mm Swing in gap: 815 mm Spindle bore: 90 mm Spindle nose: D1-11 Camlock Tailstock taper: Morse taper MT5 Spindle speed range: 18–1400 rpm Number of spindle speeds: 16 Motor power: approx. 9.3 kW Power supply: 3-phase Lhjdpfx Ajy Iwydsncel

Condition: used, used spindle headstock suitable as a source of spare parts Ledpfx Aney Ul Hfjcshl spindle bore 90 mm clutch in good condition

Condition: used, Year of construction: 2000, operating hours: 17,200 h, functionality: fully functional, machine/vehicle number: T 90077, turning length: 450 mm, turning diameter: 230 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, overall weight: 2,800 kg, - Year of manufacture: 2000 - Single owner, used in-house - Fully functional, under power, ready for demonstration - Operating hours: 17,200 h - X-axis travel: 200 mm - Z-axis travel: 450 mm - Turning diameter: 230 mm Ledpfx Aoxgtrkoncohl - Turning length: 450 mm - Spindle speed: 4,000 rpm - Spindle bore: 52 mm - Spindle motor power: 11 kW - Control: Fanuc 21 i - Tailstock - 12-station VDI 30 turret - Chip conveyor - Weight: 2,800 kg Net price ex-works, unloaded, from location Luckenwalde (Germany), excluding transport