Used Compost Turner for sale (239)

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 338 kW (459.55 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 338 kW / 460 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of rotors: 48 • Rotor speed: 1300 rpm • Tow hitch: 40 mm Knodpfx Ajzdtzmeqrec • Fiberizing of organic material for composting up to a diameter of 30 cm • Shredding of old wood, waste wood up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Year of construction: 1995, condition: good (used), functionality: fully functional, Automatic sheeting machine for joining single-face/corrugated cardboard sheets, complete with delivery system featuring a sheet turner and palletizer. Maximum sheet size: 1400x1600. Knsdpsz Ibmijfx Aqrjc Machine dimensions: - Length: 16630mm - Width: 4330mm - Height: 3350mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: PW2000-003, workpiece weight (max.): 2,000 kg, overall weight: 1,310 kg, table length: 1,400 mm, table width: 900 mm, The machine is in like-new condition! TECHNICAL DETAILS Maximum load capacity: 2,000 kg Tables and support surfaces Number of tables: 2 Support surface per table: 1,400 x 900 mm Swiveling movement Swiveling angle of the tables: 100° Angle of the load-bearing steel profiles: 90° Table travel distances: approx. 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 2,600 x 1,800 x 1,300 mm Machine weight: 1,310 kg Machine operating principle: The turning device consists of two opposing tables, each with a support surface of 1400 x 900 mm. On the side of the table that is facing downwards during swiveling, the load-bearing steel profiles are angled upwards by 90° in order to securely hold the plate to be turned even in a vertical position during the 90° swiveling process. Ksdpfozd A Rdex Aqrjnc Both tables are arranged opposite each other and are swivelled by 100° using hydraulic cylinders. The tables are mounted on a load-bearing substructure, on which one table is fixed and the other is movable relative to it. The movement is carried out by hydraulic cylinders, which can move the table, which is mounted on rollers, by approximately 300 mm. The substructure also supports the hydraulic and electrical components. A hydraulic unit serves as the drive source, supplying the cylinders with oil according to the control commands. The corresponding valves are electrically and/or hydraulically controlled and initiate and maintain the movements of the tables required for their interaction until the turning process is completed. Particular attention is paid to the safety of the movements and the precise adjustment of the table movement in the interaction between pressure and tension when designing the hydraulic system. The geometry of the axes of rotation of the tables results in a change in the load effect on the tilting cylinders. The hydraulics are designed in such a way that the required performance is ensured and an overload of the components is not possible during normal operation. Corresponding filters, combined with a generously sized tank volume, ensure a high availability of the hydraulic system. The necessary electrical control is completely housed in a steel sheet metal enclosure, which contains all the required components. The core of the control is a PLC, in which the operating parameters are processed according to the program specification. In addition, the emergency stop function and all the relays and output units required to control the functions are installed. The turning device is operated via a control panel in which a touch panel is used to input the function parameters, such as swivel table 1 up, swivel table 1 down, move table 1 forward, move table 1 backward, swivel table 2 up, swivel table 2 down, as well as start or stop the automatic mode. In order to avoid a collision of the tables in manual operation, the PLC programming is designed in such a way that this is prevented by the data on the table position and the respective table inclination. After the emergency stop situation has been resolved, the PLC control automatically completes the turning process. The turning device is equipped with heavy-duty rollers and can therefore be moved.

Condition: used, Year of construction: 1998, machine/vehicle number: 7356, Stapelwender / Pile Turner Baumann BSW 2-500Year 1998 - Serial-No. 7356 Bogenformat / Sheet Size max. 550 x 750mm Kjdpsrw Dk Sefx Aqronc Stapelgewicht / loading capacity max. 500kgs Innenmaß Plattform / Interior platform size 620 x 940mm Öffnungsweite Plattform / Opening of platforms min. 460mm - max. 1220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1988, machine/vehicle number: 14068, Stapelwender / Pile Turner DOX 3000 MYear 1988 - Serial-No. 7356 Knodpjh Axkvjfx Aqroc Format / Size max. 720 x 1020mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, functionality: fully functional, total width: 8,000 mm, total height: 4,000 mm, total length: 70,000 mm, Pallet production line, Terwort, 17 seconds/pallet, completely modernized in 2023 Kallfass block saw Knodpfx Ajzp El Uoqrjc Block switch Block buffer Terwort NM1 nailing machine Deck storage Deck gripper Storage 2 x star turners Terwort NM2 nailing machine Skid milling machine Clamping device Miter saw Branding station Forklift Outfeed conveyor

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. Ksdpfx Aqjrzhfasrenc * Direction of rotation: from longitudinal to transservsal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Knedpfx Aqozagkzoroc Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: excellent (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 21O0400016-04, total height: 6,557,000 mm, total width: 2,450,000 mm, total length: 8,290,000 mm, type of input current: three-phase, input voltage: 380 V, power: 90 kW (122.37 HP), Equipment: CE marking, type plate available, The Mixer is a machine designed to blend materials of different consistencies, such as pruning residues and digestate, within the composting process. Feeding can be automatic via conveyor belts or manual using a loader operated by an operator. The machine is in nearly-new condition and can be applied in various fields; it can be inspected and tested, including with specific products. Knedjw Tir Iepfx Aqrec

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. Ksdpfx Ajrzhfpoqrsnc * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from longitudinal to transversal Ksdpsrzhfljfx Aqrsnc This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: ready for operation (used), functionality: fully functional, For sale is a wood chipping line (chipper canter line) with the following components: - Log infeed - Step conveyor for logs, manufacturer Saenger + Massierer - Singulator Knsdezrfkvjpfx Aqrec - Log conveyor - Centering infeed with log turner, manufacturer Kockums, type 447-6 C, serial number 70984 - Chipper centering device, manufacturer Kockums, type 240-12 D - Outfeed conveyor with lateral discharge option - Control cabinet and control system (Siemens Simatic Panel) for the entire line - Max. log diameter: 50 cm The line is sold excluding any warranty and liability for defects.

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Knedpehqhciofx Aqrsc Machine nr: 104/1656

Condition: like new (used), Year of construction: 2017, functionality: fully functional, working width: 1,600 mm, total length: 75,000 mm, total width: 17,000 mm, Technical Details: Cefla painting/finishing line with roller coating machines for panel finishing *Maximum working width: 1650 mm *Automatic loading system with integrated robot Knodpfx Aqjyv Hzgjrjc *Line dimensions: 75 x 17 m *Line configuration: *3 x Cefla Smartclean 32-B brush cleaning machines *3 x Cefla Smartcoater MF Evo roller coating/painting machines *1 x Cefla Smartcoater SP1 Evo finishing machine *2 x Cefla UV-R M1 1600 UV curing tunnels (1 UV lamp each) *1 x Cefla UV-R M3 1600 UV curing tunnel (3 UV lamps) *1 x Cefla UV-R M2 1600 UV curing tunnel (2 UV lamps) *Cefla TR500 motorized conveyor line *Cefla automatic panel turner *Costa top sanding machine with 1 roller and 1 finishing pad *Automatic loading system with 2 x ABB robots

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Knsdpfx Aqsy Hi D Ssrjc Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2001, Titan Die Cutter MLF 170 Year: 2001 with chrome-plated and precision-ground cutting bed Complete with safety guards and operator panel Electrical and hydraulic systems Cutting bed with cold and hot working system CE certified Zenari Engineering Feeder / Pile Turner Model: MettilevaFogli MLF 170 (2002) Automatic pile feeding system Ksdpoyu N R Hofx Aqrenc Hydraulic lifting and transfer system with rollers Adjustable speed and pile height control Max sheet format: 1200 x 1700 mm Max sheet format: 500 x 700 mm Cutting force: suitable for heavy carton and corrugated board Automatic feeder (Zenari MLF 170) Die cutting press (Titan MLF 170) Delivery system with roller track Safety features: full enclosure and operator access controls Regularly serviced and maintained

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 00020, total height: 1,280 mm, total width: 1,510 mm, total length: 1,965 mm, overall weight: 450 kg, type of input current: AC, Equipment: CE marking, SAMZON 104L, a robust and reliable pile turner designed for efficient handling and pallet changing of paper, cardboard, printed materials and other sheet products. The SAMZON 104L is ideal for printing houses, paper processing companies and production environments where fast and safe handling of heavy material stacks is required. Knedpfxsz Iqpgj Aqrsc Availability: Immediately / by agreement Please contact us for further information, photos, specifications or to arrange an inspection.

Year of construction: 2000, condition: good (used), machine/vehicle number: 2000, Standard Equipment Size: 50 x 70 Kodpfefh Nrqsx Aqrjnc

Condition: used, Panel turning device used for loading and unloading panels. Working dimensions: Knedpfx Asrzhfdjqrec * Maximum panel width: 1300 mm. * Maximum panel length: 3200 mm. * Rotation system: double cone. * Direction of rotation: from transverse to longitudinal This device is commonly used in the wood and furniture industry to facilitate the movement of panels during processing. If you have any further questions or need further details, please don't hesitate to ask!

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, HESS RH 2000 complete line, production pallet size 1400-1100, double feeder machine, year of manufacture 2000, stacking and destacking elevator, rack trolley, Doppler, centering device, packaging machine, horizontal strapping, pallet turner, 5 armored mold conveyors, noise-reducing panels, Siemens S7 control. Kedpexliqgsfx Aqrenc

Year of construction: 1999, condition: good (used), functionality: fully functional, Plate turner, maximum dimensions 3200 x 1000 mm. Functional between two through-feed drilling machines. Kodpsza U Ibsfx Aqrenc Has not been used extensively.

Year of construction: 2025, operating hours: 15 h, condition: like new (used), functionality: fully functional, input current: 230 A, machine/vehicle number: 202505, Absolutely like new! Demo unit (price incl. 19% VAT) - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control - Integrated exhaust air management from the cooking chamber Scope of delivery - Starter accessory set consisting of: - 1 × rectangular pan, smooth, 260 × 260 mm - 1 × round snack pan, Ø 190 mm - 1 × round snack pan, Ø 250 mm - 1 × tong for 50 bowls - 1 × turner, 360 mm - 1 × silicone tong, 260 mm - Power cable Housing & design - Color: Red / Stainless steel Technical data - Dimensions (H × W × D): 420 × 540 × 500 mm - Power: 3,000 W - Weight: 29.5 kg - Connection: 230 V / 50 Hz / 16 A The speed oven is a compact high-performance unit for professional use in the catering industry. It is suitable for rapid cooking, baking, and heating of various dishes, designed for efficient workflows with high output. The speed oven features a non-stick coated cooking chamber and integrated exhaust air management. Thanks to TRIAC circuitry, the device allows for precise operation and consistent power regulation. Knodpfjyxy R Tox Aqroc Low odor, enables roasting characteristics without fat or oils ... Functionality - Speed oven with non-stick cooking chamber - Suitable for cooking and heating food - TRIAC circuit for precise power control - Integrated exhaust air management from the cooking chamber Extensive accessories available, such as steak contact plates... (Source: Website Reamotion Delmenhorst)

Condition: good (used), Ram Punch Busch model A Label die cutter Professional machine, German-made. In very good condition. Busch is a market leader in the production of pallet turners and punching machines. 100% functional, ready for production. Technical specifications: Opening: 300 mm Max. format: 180 x 180 mm Cycle rate: 15/min Stroke length: 200 mm Capacity: 900,000 sheets/h Weight: 600 kg Kedpfx Aoz S Uvmoqrenc Equipped with a high-speed hydraulic power unit. Features clamps for mounting dies, with axial die adjustment. Feed table adjustable in all planes. Two operating modes: semi-automatic and manual. Includes a delivery tray (stacking tray).

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year of Manufacture 1975 with control panel in the cabin, bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, max. saw blade width 310 mm, bandsaw blade length 11,500 mm bandsaw size 11495x310x1.85x55 log infeed system approx. 20 m long, four-strand system with inserter block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, drive power 100 kW, carriage speed 5-120 m/min. powered roller conveyor with slab removal with brush, lifting device with puller for trimming complete electrical switchgear cabinets complete sharpening room equipment for bandsaw blades Knsdpfoxvrnisx Aqrsc

Year of construction: 2019, operating hours: 1,685 h, condition: good (used), Backers 2HTA Star Screen / Lindner ZetaStar 75 – Crawler Mobile & Hooklift System For sale is a versatile Backers 2HTA built in 2019 with only 1,685 operating hours. The machine was manufactured by Backers and was also sold under the name Lindner ZetaStar 75. The machine is ideally suited as a secondary screening unit behind shredders and pre-shredders. It performs especially well when processing bulky waste, commercial waste, green waste or waste wood, as the material is efficiently screened and the oversized fraction can be returned directly into the shredder via the hydraulically swivelable oversize conveyor. This eliminates the need for an additional excavator or wheel loader for material recirculation. Thanks to the flexible star and screen deck configuration, the machine can also be used for screening topsoil, wet clay soil, sand, compost or construction waste. The screening size can be individually adjusted; the machine is currently set up for material smaller than 60 mm. Modifications to the stars and screen deck are available at extra cost. Kedpjy Ui Erefx Aqronc The compact design allows easy transportation via hooklift system. On site, the machine can be repositioned quickly using the crawler track system. Technical Data: * Year of manufacture: 2019 * Operating hours: 1,685 h * 2-fraction screening * Perkins engine 74.5 kW * DEF / AdBlue system * Throughput: >120 m³/h * Operating weight: approx. 12 t * Crawler mobile with hooklift system Transport Dimensions: * Transport length: 7.50 m * Transport width: 2.55 m * Transport height: 2.70 m Hopper: * Capacity: 2.5 m³ * Dimensions (L x W x H): 2.80 m x 1.20 m x 1.00 m * Loading height: approx. 3 m Screen Deck: * Dimensions (L x W): 4.20 m x 1.20 m Special Features: * Hydraulically swivelable oversize conveyor * Direct recirculation of oversized material into the shredder * No additional wheel loader required for recirculation * Adjustable screening sizes available * Suitable for various materials * Compact and highly mobile design The machine is in good condition and ready for immediate use. Ideal for recycling companies, composting operations, wood processing, waste management or earthmoving businesses. Viewing and test operation possible by appointment. If interested, please feel free to contact us. Notes: * Sale excludes any warranty or guarantee. * No returns or renegotiations. * Subject to prior sale. * All information provided without guarantee. The seller accepts no liability for errors, omissions or changes in the description. * Sale is subject to prior sale at any time.