Used Deckel Kf2 for sale (693)

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Dedpfx Akewid Spj Aokw Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, DECKEL MONITOR SCREEN DIALOG FP2 / FP3 Dodpjxn Tzzefx Ak Ajkw

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: Dkjdpfx Asx A Eddok Aow - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment Dkjdpfxeznn Hre Ak Asw - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW Dkjdpfx Aozpbfdek Asw spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with control SIEMENS Sinumerik 840D incl. ShopMill electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser coolant system coolant through the spindle chip conveyor coolant cooling Machine can be inspected under power

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,421 h, functionality: fully functional, machine/vehicle number: 29100009074, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, workpiece diameter (max.): 140 mm, spindle speed (max.): 16,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travel range X-axis: 640 mm Travel range Y-axis: 600 mm Travel range Z-axis: 500 mm Clamping area length: 850 mm Clamping area width: 600 mm T-slots: DIN 650-14 Loading height, top edge of table: 850 mm Table load max.: 600 kg Spindle manufacturer: Franz Kessler GmbH Speed: 1,600 - 4,700 / 4,700 - 16,000 rpm Number of magazine slots: 30 Slot coding: Fixed slot coding Load weight max.: 90 kg Chip-to-chip time without free travel logic t3/t2: 6.8 s Djdozpxqdepfx Ak Ajkw Chip-to-chip time without free travel logic t1 (30): 7.9 s Chip-to-chip time with free travel logic t3/t2: 8.3 s Chip-to-chip time with free travel logic t1 (30): 9.3 s TOOLS AND TOOL MAGAZINE Diameter, standard tool max.: 100 mm Diameter, special tool with free neighboring slots max.: 140 mm Tool length max.: 300 mm Tool weight max.: 6 kg FEED Feed force X, Y, and Z axes: 7,000 N Feed rate X, Y, and Z axes max.: 40 m/min Rapid traverse speed Y and Z axes: 40 m/min Rapid traverse speed X axis: 70 m/min Ball screw diameter/pitch: 40/15 mm POSITIONING SYSTEMS Positioning accuracy, direct measuring system X-axis: 0.008 mm Positioning accuracy, indirect measuring system Y and Z axes: 0.020 mm Positioning accuracy, direct measuring system (option): 0.010 mm Resolution: 0.001 mm Input fineness X, Y, and Z axes: 0.001 mm MACHINE DETAILS Operating hours: 11,421 h Power-on time: 32,054 h Connected power: 33 kVA Nominal current max.: 58 A Fuse rating: 63 A Mains voltage: 400 V Mains frequency: 50/60 Hz Control voltage: 230 V Control voltage: 24 V COOLANT AND CHIP MANAGEMENT Chip box container capacity: 150 l Pump capacity, external coolant supply: 50 l/min Pressure, external coolant supply: 2.0 bar Pump capacity, chip flushing: 90 l/min Pressure, chip flushing: 1.9 bar Pump capacity, flushing gun: 50 l/min Pressure, flushing gun: 2.0 bar

Condition: ready for operation (used), functionality: fully functional, Universal tool grinding machine DECKEL S 11 with accessories & tool cabinet -Grinding stroke 190mm -Grinding stroke during orbital grinding 190mm Dkodpfx Aozx R Awok Aow -Longitudinal adjustment of the grinding spindle approx. 5mm -Vertical adjustment of the grinding head approx. 320mm -Transverse adjustment of the tool slide approx. 100mm -Adjustment ranges: -Grinding head carrier approx. 800mm -Tool carrier approx. 215mm -Universal / dividing head approx. 330mm -Swivel angle / grinding head carrier 360 degrees / grinding head 360 degrees / tool carrier 360 degrees -Clamping surface of the tool slide approx. 500x180mm -Max. workpiece diameter between centers 130mm -Max. workpiece diameter / overhanging clamping (universal dividing head) 620mm -Digital display -Measuring optics -Further accessories (SEE PICTURES) -Documentation -Tool cabinet Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,110 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, rotational speed (max.): 28,000 rpm, overall weight: 14,000 kg, spindle speed (max.): 28,000 rpm, operating hours of spindle: 10,000 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous machining center Linear motors 28,000 rpm spindle with HSK 63A, recently replaced Rotary table, 950mm diameter Wireless workpiece probe MH Laser presetter for tool inspection Optical scales Remote handwheel Dsdpezmxmtefx Ak Askw Chip conveyor NO coolant supply through the spindle Complete with manuals Disconnection scheduled for August 25th Removal scheduled for August 26th

Condition: good (used), Year of construction: 1984, functionality: fully functional, Travel range X: 500 mm Travel range Y: 400 mm Travel range Z: 400 mm Spindle speed: 31.5 – 2000 rpm Tool holder: SK 40 with S20x2 draw-in thread Table type: Fixed table Table clamping surface: 700 x 330 mm Dkedpfxszi Uy Uj Ak Aow Weight: 1600 kg Dimensions: approx. 1700 x 1300 x 1900 mm Paint finish: RAL 6011 Reseda green Digital display: 3-axis HEIDENHAIN Accessories: Central lubrication, coolant tank, other accessories available upon request.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, Michael Deckel S 11 tool grinding machine. The machine is operational and in good condition. Accessories: grinding wheel arbors, collets, operating manuals. Dksdpozbt Aaofx Ak Ajw

Condition: used, functionality: fully functional, DECKEL Tool Grinding Machine Type 2025 / Internal Grinding Machine with Vertical Grinding Spindle – Fully Operational For sale is a used DECKEL precision grinding machine with a vertical grinding spindle for internal cylindrical grinding. Dkodpozhuyxjfx Ak Aow The machine is used, fully operational, and equipped with a digital position display (DRO). Features: Vertical internal grinding spindle Digital readout (X / Y / Z) Original DECKEL components Robust precision engineering Suitable for: Tool making Mold and die industry Precision grinding Internal machining of bores Inspection and test run available by appointment. Loading on site possible. Additional photos available on request.

Condition: good (used), Year of construction: 1986, SOE reamer grinding machine with projection measuring device. Accessories: collets, various grinding wheels. In good, operational condition. Dodpfx Aksy Tuhvs Ajkw

Condition: used, Year of construction: 2006, x-travel 630 mm y-travel 560 mm z-travel 560 mm table surface area 1000 x 600 mm spindle taper HSK 63 A spindle turning speed - stepless 18.000 U/min Dksdpfx Asy Tyzusk Aow feeds x/y/z -stepless 0 - 30.000 mm/min rapid traverse 30 m/min no. of tools in magazin 2 x 12 workpiece diameter at full load 130 mm tool length - max. 315 mm weight of tools max. 8 kg internal coolant system feed 40 bar control HEIDENHAIN control MillPlus iT table load capacity max. 500 kg total power requirement 52 kVA weight of the machine ca. 6,5 t dimensions of machine L x W x H 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640; electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter

Condition: good (used), Year of construction: 1975, Deckel FP2 FPS retrofitted tool milling machine with a 3-axis Heidenhain digital display. The machine is in good condition and comes from a training department. It features a fixed table, electrically interlocked milling head guard, and an SK 40 spindle mount. Accessories include various collets and milling arbors. It is in good, operational condition. A demonstration under power can be arranged. Dkjdpfxezac Sbe Ak Aew

Condition: ready for operation (used), Year of construction: 2006, operating hours: 5,366 h, functionality: fully functional, machine/vehicle number: 11415551674, controller model: Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, table diameter: 600 mm, TECHNICAL DETAILS Spindle speed: 10,000 rpm Dksdpfjzhmw Aox Ak Aew Table diameter: 600 mm Number of tool changer positions: 16 Tool system: SK40 MACHINE DETAILS Control model: Heidenhain i TNC 530 Dimensions & Weight Dimensions (L x W x H): 2,200 x 2,000 x 2,100 mm Weight: approx. 4 t Operating hours, control system on: 24,237 h Operating hours, automatic mode: 5,366 h

Condition: used, Technical Specifications Article number: M100001418 Operation: CNC without mechanical handwheels Control system: CNC contour control DECKEL Contour 3 Dkjdpfx Aszfpicsk Ajw Spindle speed: 63 - 3150 rpm Feed rate: 2-3000 mm/min, continuously adjustable Rapid traverse rate: 3000 mm/min Power: 4.4 kW Tailstock: Extendable tailstock, vertical 80 mm, SK40 Clamping system: DIN 2080 or DIN 69872 Axes: X/Y/Z 485/385/380 mm Tilting table: Rigid tilting table 800 x 460 mm, max. load 400 kg Hydromechanical clamping system SK40 with draw bolts DIN 2080 or DIN 69872 Vertical and horizontal spindle Milling head: Manually swiveling +/- 90 degrees Programming: Deckel Contour 3 - Dialogue-guided programming with versatile machining cycles.

Condition: good (used), Year of construction: 1999, operating hours: 76,863 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 426, Equipment: chip conveyor, Title: 5-Axis Machining Center Deckel Maho DMC 125U L55, Year of Manufacture 1999, with Pallet Changer (5 Positions) Condition: good, technically and visually well-maintained, currently still in full productive use Year of Manufacture: 1999 Location: West Saxony Price: Negotiable Technical Data: Manufacturer: Deckel Maho GmbH, Pfronten Type: DMC 125U L55 Machine No.: 1110 000113 Dkjdpjzxzgajfx Ak Asw Control: Heidenhain TNC 426 5-Axis version with rotary table (B and C axes) Pallet changer with 5 pallet positions Integrated chip conveyor system Separate coolant/hydraulic unit Operating Hours: approx. 76,863 h Spindle Hours: 4,200 h Description: For sale is a 5-axis universal machining center Deckel Maho DMC 125U L55, year of manufacture 1999, with Heidenhain TNC 426 control. The machine features a rotary table with B and C axes for complete 5-axis machining of large workpieces, as well as a pallet changer with 5 positions for efficient, automated workpiece changes. A hall crane is also available at the location, which can be used for transporting and handling the workpieces if required. Condition is good, both technically and visually, with approximately 76,863 operating hours. The machine is currently still in full productive use and can be made available on short notice. Inspection and test run at the location in West Saxony can be arranged. Special Note: If there is sufficient interest, it is also possible to take over the entire production hall, including other machining centers, as a complete package. If you are interested in a complete takeover, please feel free to contact us. Price: Negotiable

Condition: excellent (used), functionality: fully functional, total height: 1,760 mm, total length: 1,100 mm, total width: 800 mm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 520 kg, input voltage: 400 V, spindle nose: ISO 40, Tool grinding machine DECKEL S11 TECHNICAL CHARACTERISTICS: Grinding wheel diameter: 125 [mm] Workpiece spindle nose: ISO 40 Paper filtration unit: No Dsdpfozz Hk Njx Ak Aokw Supply voltage: 400 [V] Total power required: 2 [kVA] Dimensions: 1100 x 800 x 1760 Weight: 520 [Kg] EQUIPMENT INCLUDED: x1 universal index head - Part N°: 255X0X x10 dividing inserts for universal index head x1 tailstock with transverse adjustment - Part N°: 2621000 x1 tailstock with vertical adjustment - Part N°: 2624000 x1 swivel bracket assembly - Part N°: 2626000 x1 universal wheel dresser - Part N°: 2628000 x1 universal setting gauge - Part N°: 2570000 x1 spiral and relief grinding attachment - Part N°: 2580000 x1 relief grinding slide - Part N°: 2673000 x1 machine vice - Part N°: 2635000 x1 opto-electronic measuring unit with miscroscope - Part N°: 2650012 x2 digital readouts RSF-Elektronik x1 radius grinding attachment - Part N°: 2601X00 x1 LED lamp x3 feet pads Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinders, lathes, machining centers, and milling machines.

Condition: excellent (used), Year of construction: 1999, X-axis travel: 1,250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Main spindle: Djdpfjgypabjx Ak Askw Speed range – main spindle, max. 12,000 rpm Drive power – main spindle: 15 / 10 kW Table surface area: 1,500 x 1,050 mm Number of tool positions: 30

Condition: reconditioned (used), Year of construction: 1987, Universal milling machine Manufacturer: DECKEL Dkodpehtrd Isfx Ak Asw Model: FP 1 Aktiv Year of manufacture: 1987 - refurbished, newly painted, RAL 7035 light grey / RAL 7012 basalt grey Machine No.: 2102-3429 with warranty Geometric accuracy check with test report Accessories: - 3-axis Active digital display HEIDENHAIN TNC 113 with Active function in the X, Y, and Z axes - Fixed table 600 x 210 (T-slot: 12 mm) - Vertical milling head SK 40 with draw-in thread S 20 x 2 - Coolant system - Central lubrication, electric - Operating manual - used, sold as is -

Year of construction: 1980, condition: excellent (used), Deckel FP1 milling machine in very good condition. Specifications: - X-axis 300mm - Y-axis 160mm - Z-axis 340mm Dksdpfx Akjkuynuo Aew - spindle mount ISO 40 - spindle speed 40-2000 rpm - dimensions: 1200 x 1100 x 1800 mm - weight: approx. 800 kg Accessories: - Heidenhain TNC 113 digital control for 3 axes - Tilting/swiveling table - Variable feed rate for X and Z axes - Coolant system

Year of construction: 2000, operating hours: 47,085 h, condition: good (used), functionality: fully functional, machine/vehicle number: 42272, Machining center with 5 pallets TECHNICAL DETAILS x-axis travel: 600 mm y-axis travel: 560 mm z-axis travel: 560 mm B-axis (table): 360° Tool holder: SK 40 Djdpfx Aelrupask Askw Pallet size: 5 x 500x400 mm Control system: Siemens 840D MACHINE DETAILS Supply voltage: 300 V / 3 phases / 50 Hz Power: 60 kVA

Year of construction: 1996, operating hours: 91,897 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 288, TECHNICAL DETAILS x-axis travel: 600 mm y-axis travel: 560 mm z-axis travel: 560 mm Control system: Siemens MACHINE DETAILS Connection voltage: 400 V / 3 phases / 50 Hz Connection power: 60 kVA Total power consumption: 12 kW Machine weight: approx. 10 t Dkedpfx Akelruxfo Asw EQUIPMENT - 2 machine pallets - 1 measuring probe

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Manufacturer: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL 7035 light gray / RAL 7012 basalt gray RAL 5008 gray-blue Machine no.: 2203-7097 with warranty Geometric acceptance with test report Accessories: - 3-axis digital display HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tool clamping DIN 2080 - Chip collection tray - Central lubrication, electric - Coolant system - Operating manual Dedpfxslfc U Do Ak Ajkw Used, as is The machine is technically in the condition corresponding to the year of manufacture.

Condition: used, Graver grinder, grinder, angle grinder, rotary steel grinder, thread drill grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder, double bench grinder, tool grinder -Manufacturer: precision mechanics Weilheim, lid tool grinding machine type SO/64-6550 -Motor power: 0.37 kW 2800 rpm -Speed: 2800 rpm Dsdpfx Ajpix Nrjk Aekw -Grinding discs: Ø 100 mm -Dimensions: 510/450/H1280 mm -Weight: 67kg