Used Demolition Shears for sale (1,713)

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 241 143, cutting length (max.): 3,600 mm, Veneer shears with one blade; length: 3.60 m Hsdpfjwql N Ssx Aaqew

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness aluminum (max.): 16 mm, sheet thickness steel (max.): 13 mm, back gauge speed R-axis: 50 mm/s, TECHNICAL DETAILS Maximum sheet thickness (steel): 13 mm Maximum sheet thickness (aluminum): 16 mm Maximum cutting length: 3,100 mm Hedpsw Ucy Iofx Aaqsw Cutting angle: 0.5° – 3° Sheet thickness (450 N/mm²): 1 - 13 mm Backgauge speed, R axis: 150 mm/s Backgauge travel, Z axis: 1,000 mm Front support arm length (from blade): 1,500 mm Rear buffer speed: 125 mm/s Cuts per minute at full length: 18 Cuts per minute at minimum length: 46 Min. cutting clearance: 0.04 mm Max. cutting clearance: 0.5 mm Positioning accuracy: +/-0.03 mm MACHINE DETAILS Power supply type: Three-phase Main power supply: 3/N/PE - 50Hz - 400/230V Motor power: 30 kW Total weight: 12,500 kg Overall length: 4,000 mm Overall width: 4,500 mm Overall height: 2,000 mm EQUIPMENT - Documentation/manual - Finger guard - Safety light barrier DESCRIPTION SafanDarley guillotine shears feature unique technology. The hydraulic system is controlled electronically during the cutting process. The amount of energy consumed by this system is calculated according to the thickness of the material being cut. The backlash-free ball screw drive enables positioning accuracy of +/-0.03 mm, while the minimal clearance of 0.04 mm allows quality cuts even on materials ranging from 0.5 mm up to the machine’s maximum thickness. The design of the worktable ensures a straight cut, even under heavy loads. The automatic selection of clearance and cutting angle according to material type and thickness, as well as compensation for backgauge position, allow even less-experienced operators to run the machine efficiently and consistently achieve high product quality.

Condition: good (used), Huttenlocher - Plate Shear 2580x8mm - Cutting length: 2500mm - Maximum cutting thickness: 8mm - Fully functional - Manual back gauge Dimensions: LxWxH 3.2x2.5x1.6 meters / Weight 6.5 t Hjdpfsw I A Daex Aaqow Subject to errors and input mistakes.

Condition: good (used), I offer here a set from Schechtl Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Hedpfxoudbzmj Aaqjw Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Condition: used, functionality: fully functional, Brand: HACO Hsdewtp I Dspfx Aaqew Capacity: 3000 x 6 Electric back gauge with display

Condition: good (used), functionality: fully functional, Year of construction: 1983, We are selling a used guillotine shear from the manufacturer Digep DLB 4 3050. The machine is fully operational, connected to power, and fitted with sharp blades. Hedpfxjw Rdzlo Aaqsw Technical specifications: - Sheet thickness: 4 mm - Sheet width: 3050 mm - Machine dimensions: 3.7 x 2.1 x 1.4 m - Machine weight: approx. 4.65 t The price is ex works loaded at the location in Werdau.

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Infeed dimensions 650mm x 250mm with infeed vibrating trough Hsdpfx Aswu Nwneaqjw

Condition: used, functionality: fully functional, Year of construction: 1999, machine/vehicle number: 86.33, working width: 3,190 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, overall weight: 6,800 kg, Equipment: documentation/manual, For Sale: RAS POWERcut We offer you the opportunity to acquire a high-quality guillotine shear from the renowned brand RAS POWERcut. This powerful machine is ideal for anyone involved in sheet metal processing who values maximum precision and efficiency. Product Details: - Model: Powercut 86.33 - Year of manufacture: 1999 - Condition: Used Hodpfx Aaow R Trmjqow - Technical specifications: Weight 6,800 kg Width: 3,830 mm Cutting length: 3,190 mm Max. sheet thickness: steel 6 mm Back gauge depth: 5 – 1,000 mm Benefits: - High precision and reliability - User-friendly interface - Low maintenance and durable Price: ON REQUEST If you are interested or require further information, please do not hesitate to contact us. Take this opportunity to optimize your production with this first-class machine!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, controller model: MULTICUT-ECO 2000, working width: 3,190 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 3,190 mm Sheet thickness: 6 mm Frame gap: 3,250 mm Cutting angle: 1.2° Strokes per minute: 32 - 75 spm Throat depth: 100 mm Adjustable backgauge: 5-1,000 mm Table height: 800 mm Travel speed: 180 mm/s MACHINE DETAILS Total power requirement: 15 kW Machine weight: approx. 6,200 kg Oil capacity: 150 l EQUIPMENT - Electro-hydraulic guillotine shear, "swing-beam" type - RAS "MULTICUT-ECO 2000" CNC control unit Movable, front-operated 3-axis control unit with up to 900 program lines Sheet support device for thin sheet cutting, selectable Including piece and cycle counter Selectable operating modes - Front support tables with ball casters - Central, motorized quick blade gap adjustment Hsdpfxjww E N Se Aaqjw - 1x RAS extra-long side gauge - 2x RAS extra-long support arms - 1x Free-moving foot switch - 1x RAS pneumatic sheet support device for thin sheets - 1x RAS movable scrap flap - 1x RAS extra blade set for guillotine shear

Condition: used, Professional steel shears for sheet metal fitters, assemblers, workshops, heavy-duty construction sturdy design with scissors body made of hardened and tempered steel Tooth lever transmission Lever fuse about torsion spring Blade made of high quality steel, hardened and ground adjustable clamp cut sheets, flat, round and square steel Hsdpfxsc Sc Ifj Aaqew Steel sheet up to mm: 8 Steel up to mm: 20 Square steel up mm: 18 Blade length mm: 175 Net weight kg: 47.5 Dimensions ca. 0.5 x 0.25 m x 2 m

Condition: used, functionality: fully functional, working width: 2,500 mm, sheet thickness (max.): 4 mm, Guillotine Shear NTC 2500/4 Hjdpfxjw N E Rrj Aaqjw

Condition: new, functionality: fully functional, Year of construction: 2025, Sorting and Demolition grapple HEUSS GSR16-800 16tn excavator Heuss Sorting & Demolition Grapple For max 16tn Excavator Mount of your choosing included (CW05, MS01, S-link etc) Intergrated slewring- 2 hidromotors rotator. Hardox 400 buckets, weldox frame. Hardened bolts Cr/Mdn 4 Hjdpow Hf Ugjfx Aaqow Clamping 300 bar max oilpress Rotating 190 bar max oilpress Weight 860 kg Opening 1800mm Breedte 800mm

Condition: ready for operation (used), operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: 36290, cutting force: 650 t, overall weight: 62,080 kg, table length: 6,000 mm, table width: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Performance and forces Hsdew Nv Diopfx Aaqow Shear force: 650 t Power consumption: 200 kW Working range Chamber length: 6,000 mm Closed chamber width: 781 mm Loading table dimensions: 6,000 x 2,500 mm MACHINE DETAILS Weight including table: 62,080 kg Operating hours: 8,000 Note: The machine will be available from 01.03.2026.

Condition: excellent (used), Capacity 2000 x 4 Hsdpfx Asuml R Eeaqjw Overall dimensions 3000 x 2000 Rear sheet support

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 4,125 h, working width: 3,050 mm, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, TECHNICAL DETAILS Sheet width: 3,050 mm Sheet thickness: 13 mm Back gauge – electric: 10–1,000 mm Strokes: 16 strokes/min Control: Elgo MACHINE DETAILS Total power requirement: 22 kW Operating hours: approx. 4,124 h EQUIPMENT - Automatic cutting gap adjustment - Sheet lifting device - Foot switch - Digital back gauge 1,000 Elgo - Scrap chute - Rear safety guards Hodpfx Aajww E Nxeqjw - Angle stop - Material support arms

Condition: used, guillotine scissors cutting blades, replacement blades for guillotine scissors, replacement blades, cutting blades, scissor blades Hedpfjn Nbnqex Aaqow -Cutting knife. Replacement blades for table shears, 2 pieces -Cutting length: 2550 mm -Hole spacing: 125/200 mm / Ø10 mm see photos -Price/tax: complete -Total weight: 40 kg

Condition: used, Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Hoko, lever scissors profile steel scissors type HB 15 -Steel sheet: up to 10 mm -Flat/band iron: up to 18 mm -Round steel: up to 20 mm -Sheet metal: up to 6 mm -mitred: 50 x 5 -Cutting capacity: see photo nameplate -hold-down: Hodpfxeiaqmie Aaqsw -Total dimensions: 670/200/H1670 mm -Transport dimension: 1340/200/H510 mm -Weight: 90 kg

Condition: used, Hand lever snips, lever scissors, long knife sheet metal and round steel snips, sheet metal snips, profile steel snips Hedpfsibirzjx Aaqjw -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears type 3R 4 -Steel sheet: up to 4 mm -Round steel: up to 11 mm -hold-down: -Total dimensions: 295/125/H865 mm -Transport dimension: 690/125/H310 mm -Weight: 11 kg

Condition: used, Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears -Steel sheet: up to 7 mm -Round steel: up to 20 mm -Rectangular profile: up to 18x18 mm -hold-down: Hedpfx Aaoibriioqew -Total dimensions: 480/210/H1360 mm -Transport dimension: 1070/210/H470 mm -Weight: 41 kg

Condition: used, Air demolition hammer Hjdpfx Aajcm I Uioqsw -Operating pressure: 7 bar -Number: 1x demolition hammer available -Dimensions: 500/220/H70 mm -Weight: 6kg

Condition: used, Hand lever snips, long blade tin and round steel snips, tin snips -Manufacturer: Peddinghaus sheet metal and round steel shears type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Knife length: 150 mm -Lever arm with: safety spring Hsdpefgi Nqsfx Aaqjw -Number: 2x lever scissors available -Price per piece -Dimensions: 275/100/H1180 mm / 280/100/H934 -Weight: 11 kg/pc.

Condition: used, Compressed air demolition hammer -Operating pressure: 7 bar Hedpfxocm D A Is Aaqsw -Number: 1x demolition hammer available -Price: per piece -Dimensions: 640/365/H125 mm -Weight: 22 kg

Condition: used, Hand lever shears, long knife sheet metal and round steel shears, lever shears -Hand lever snips: tin snips with stop and stable base -Blade insert length: Approx. 160 mm -Lever arm: with rack and pinion translation -Hold-down device: continuously adjustable -Total dimensions: 1000/780/H1870 mm -Transport dimension: 1000/780/H1300 mm -Weight: 100 kg Hsdpfx Aaeibw Dxoqew

Condition: used, Hand lever shears, long knife sheet metal and round steel shears, lever shears -Manufacturer: Mubea, tin and round steel shears -Blade insert length: 200 mm -Steel sheet: up to 7 mm -Flat/band iron: up to 100x9 mm Hsdpfx Asif Azusaqew -Round steel: up to 20 mm -Rectangular profile: up to . 18x18mm -Lever arm: with rack and pinion translation -Total dimensions: 540/180/H1570 mm -Transport dimension: 1250/180/H490 mm -Weight: 44kg

Condition: used, Hand lever snips, lever scissors, long-knife tin and round steel snips, tin snips, profile steel snips -Manufacturer: Peddinghaus, lever shears sheet metal and round steel shears type 3R 5 -Steel sheet: up to 5 mm Hsdpfxoiachko Aaqsw -Round steel: up to 13 mm -Total dimensions: 500/150/H1025 mm -Transport dimension: 850/150/H370 mm -Weight: 22kg