Used Dividing Attachment for sale (6,393)

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, Lodezq Iu Ispfx Akqohn 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function Lhjdszp Ak Uspfx Akqsn - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door

Condition: used, functionality: fully functional, total length: 4,350 mm, clamping force: 500 kN, Tool Carrier / Technology Carrier Zettelmeyer W26/20 Currently dismantled and divided into two parts. The carrier was completely overhauled by DEGUMA-SCHÜTZ GmbH and sold to us. DEGUMA-SCHÜTZ GmbH has taken over all documents of the company Zettelmeyer and can also supply spare parts and carry out repairs. Ljdpfx Asywtyfokqshn Please refer to the product images and the attached descriptive document for exact dimensions/information.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, spindle speed (max.): 21,000 rpm, number of axes: 4, This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Machine Benefits Technical Machine Benefits • 4 cnc axes, with chick horizontal axis dividing head and support bearing. • 21 tools • X =m 500 mm / y = 400 mm / z = 330 mm • Central coolant system with pump and filtration • Oil tank. Technical Specification Through-spindle Coolant Yes Ljdpfox D N Ntox Akqjhn

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 25734, wheel diameter: 700 mm, gear diameter: 1,000 mm, wheel width: 152 mm, workpiece spindle speed (max.): 67 rpm, feed length X-axis: 610 mm, feed length Y-axis: 610 mm, feed length Z-axis: 725 mm, pivoting range: 95 °, spindle bore: 203 mm, travel distance X-axis: 610 mm, travel distance Z-axis: 725 mm, Equipment: rotational speed infinitely variable, Equipped with: Fanuc 150MB Control Hydraulic Chucking Work Spindle Large Bore Work Spindle #80 Taper Stock Divider Helical Motion Modified Roll Hansen Coolant Chiller & Filtration Coolant Tank & Pumps Chip Conveyor Chip Hopper Reven Mist Collector Hydraulic System Transformer Cutter Bolt Work Light Operator Platform Hand Tools Documentation Specifications: Extreme Ratio: Face Milling: 10:1, Face Hobbing: 10:1 Full Depth: Maximum: Face Milling:1.25" (31.75mm), Face Hobbing: 0.93" (23.50mm) Face Width: Maximum: Face Milling:6.00" (152.00mm),Face Hobbing: 3.00" (76.20mm) Range of Tooth Numbers: 1-300 Inclusive Gear Pitch Diameter, Maximum: 1000 mm (39.37") Cutter Size, Maximum: 18" (diameter) Face Milling Cutter Size, Maximum: 350 mm (radius) Face Hobbing Root Angle Range (B-Axis) 5 deg.to 90 deg., Face Hobbing:5 deg. to 90 deg. Machine Center to Work Spindle Face:9.00"Fixed, 229mm (Fixed) A-Work Spindle: 0 to 67 RPM, 0 to 333 RPM B-Swinging Base: 0 to 30 deg./sec, N/A C-Cutter: 0 to 500 deg., Same X-Horizontal: +/-305mm (+/-12") Y-Vertical: +/-305 mm (+/-12") Z-Sliding Base: -25/+700mm (-1/+28") B-Root Angle: -5 Degree/+90 Degree Diameter of Taper Hole at Large End: 8" (#80 Taper) to 6" (#60 Taper) Taper Per Foot:3/4", Same Depth of Taper Front:6", 152.40 mm Depth of Bore: 678 mm (26.7") Diameter of Taper Bore: 140 mm (5.5") Diameter Through Spindle of Hole:7.125", 180.98 mm MACHINE DIMENSIONS: Length x Width:233"x 209", 5920 mm x 5310 mm Height: 129", 3280 mm Weight: 65,000 lbs., 29,484 kg Lhedjxaqa Sjpfx Akqjn

Condition: used, Spiral milling device, dividing head, dividing attachment, rotary table, rotary table Lhsdschyx Tepfx Akqsn -Admission inside: SK40 -Tip height: 65 mm -Distance between centers: 440 mm -Passage: Ø mm -Reversing coupling for: left u. Right spiral -Pivotable for conical spirals: 0 - 45 ° -Dimensions: 760/430/H310 mm -Weight: 61 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 89 mm -Height: adjustable -Recording: MK2 -Drawing with the photos Lsdpeb Hbx Ujfx Akqjhn -Dimensions: 220/110/H110 mm -Weight: 5 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment Ledpfx Akjb Hd Ugsqehn -Tip height: 135 mm -Admission -Drawing with the photos -Dimensions: 250/122/H155 mm -Weight: 9.5 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Top height: 300 mm Lodpfxod N Hy Us Akqohn -Recording: MK2 -Drawing: in the photos -Dimensions: 450/120/H330 mm -Weight: 21 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing attachment -Tip height: 110 mm -Drawing: in the photos -Dimensions: 180/95/145 mm -Weight: 4.2 kg Lhodjd N Uyrepfx Akqjn

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe -Handover: in the current condition as seen -Bracket: cracked, see photos -Tailstock: center height adjustable, 155 to 165 mm Lhodpfxjitdiys Akqjn -Dimensions: see the drawing in the photos -Dimensions: 430/175/H210 mm -Weight: 21.7 kg

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment, lathe Lhedpfxei E Agne Akqsn -Tailstock: center height 150 mm -Dimensions: see the drawing in the photos -Dimensions: 180/170/H175 mm -Weight: 5.3 kg

Condition: good (used), Storage location: 3143 Manufacturer: Jakob Schmid Oberkochen Year of manufacture: 1993 Type: RS 1000 Machine number: 1093 1165 Longitudinal travel of the worktable: 200 mm Transverse travel of the worktable: 180 mm Lhedpfxez E U Aro Akqsn Swivel range of the motor: 350° Vertical adjustment: 350 mm Grinding wheel arbor with centering cone: 10 / 20 mm Grinding wheel speed: 6,000 rpm Arbor with dividing head: SK 30 Swivel range of the dividing head: 360° Grinding wheel diameter: 80 mm Connection power: 0.2 kW Condition: good Accessories/equipment: 6-jaw chuck, Additional attachment, MK5 arbor Dimensions with table: 600 x 800 x 1,500 mm Weight of the machine with table: 150 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, HANDTMANN GMD 99-2 | Ground meat portioning machine / Portioning dispenser Manufacturer: Albert Handtmann Maschinenfabrik GmbH & Co. KG Lhedpfxsz Ek Tgj Akqon Model / Type: GMD 99-2 (Type 99-2) Serial number: 33486 Year of manufacture: 2013 Belt / knife width: 220 mm / 220 mm Working clearance: 250 x 100 mm Overall dimensions: 1390 x 700 x 1230 mm The Handtmann GMD 99-2, a professional ground meat portioning machine (Ground Meat Divider), is an industrial device designed for the precise division of a continuously formed product stream into consistent portions. The machine works directly with Handtmann VF 600 series vacuum fillers (and GD grinding attachments), creating an automatic and efficient portioning system. The machine is used in meat processing plants, butcher shops, and catering and delicatessen facilities that focus on the production of packaged ground meat, cevapcici, burgers, roasts, or vegetable-based products. Thanks to its 220 mm wide knife and precise pneumatic or mechanical cutting system, the machine guarantees high throughput and perfect aesthetics for the finished portion before it is placed on a tray or packaged in a flow wrapper.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 180 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 20 rpm, For sale: Aciera F4 milling machine – ISO 30 – very complete with many accessories For sale: an Aciera F4 universal milling machine, equipped with an ISO 30 tool holder and featuring a very extensive range of accessories. The Aciera F4 is a high-quality Swiss precision milling machine, known for its robust construction, accuracy and versatility. This type of machine is very popular with toolmakers, precision workshops and enthusiasts of classic quality machines. Thanks to its universal design, the F4 is suitable for a large number of milling, drilling and precision machining operations. Technical specifications: • Brand: Aciera • Type: F4 • Design: Universal milling machine • Spindle taper: ISO 30 • X-axis travel: 400 mm • Y-axis travel: 180 mm • Z-axis travel: 400 mm • Solid and precise Swiss construction • Suitable for both horizontal and vertical milling, depending on the head and accessories used • Highly versatile Very extensive accessories The machine comes with a very large number of accessories, including various ISO 30 tool holders and other original and matching accessories. Including: • Dividing head • Various dividing plates • Rotary table • Machine vise • Various ISO 30 milling chucks • Various collet chucks and collets Lhedpfszxgyfex Akqon • Milling arbors and holders • Various milling cutters and cutting tools • Clamping tools • Drawbars • Clamping devices • Parallel blocks and clamping materials • Various original and matching machine attachments • And much more The large number of accessories makes this a particularly complete machine that can be used immediately in a wide range of applications. The extensive collection of holders, collets, dividing equipment and clamping tools alone represents a significant value. The Aciera F4 is not a light hobby milling machine, but a real precision and toolmaking machine. With a working area of 400 mm in X, 180 mm in Y and 400 mm in Z, the ISO 30 taper and the extensive accessories, this is a particularly versatile machine. A great opportunity to purchase a very complete Aciera F4 with ISO 30 taper and an exceptionally large number of accessories. Condition: used Location: Emmeloord Asking price: € 6,850 VAT: excluding VAT Inspection and demonstration are possible by appointment. If you are seriously interested or would like more information about the machine and the available accessories, please contact us.

Condition: used, operating hours: 24,200 h, lifting height: 4,720 mm, free lift: 1,590 mm, fuel type: gas, mast type: triplex, fork length: 1,090 mm, fork width: 970 mm, total height: 2,130 mm, total length: 3,640 mm, total width: 1,150 mm, color: orange, Year of manufacture: 2008 Empty weight: 3.864 kg Lifting capacity: 2.000 kg - Year: 2008 - Documentation available: Yes - CE marking present: Yes - Serial number: 11878 - Operating hours: 24200 - Lifting capacity: 2000kg - Lifting height: 4720mm - Overhead clearance: 2130mm - Free lift: 1590mm - Fork length: 1090mm - Maximum fork width: 970mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Free-lift - Mast: Triplex - Drive: LPG - Motor brand: Toyota - Transport dimensions: 3640mm x 1150mm x 2130mm (l x w x h) - Transport weight [kg]: 3864kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Ljdez T Un Eopfx Akqohn VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, Used beam cambering and straightening machine from BAKKER Capacity: 200 tons Includes several tools Ledpfe Aazwfex Akqohn ----- Used beam bending machine from BAKKER Capacity: 200 tons Includes various attachments #Stierli-Bieger #Voortman #Busschers #Dynobend

Condition: good (used), Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: ROTA / Reifen Günther, solid rubber tires with rim, 2 pieces -Tire size: 18x7-8 / Rim 4.33 R-8 -Bolt circle: Ø 145 x 18 mm -Hub bore: Ø 110 mm -Submission/Price: complete Lhsdpfxjz Tqydj Akqon -Dimensions: Ø 430 x 160 mm -Weight: 25 kg/pc.

Condition: used, operating hours: 571 h, lifting height: 4,260 mm, fuel type: electric, mast type: duplex, fork length: 1,500 mm, fork width: 1,825 mm, total height: 3,060 mm, total length: 3,300 mm, total width: 2,010 mm, color: red, Year of manufacture: 2009 Empty weight: 11.000 kg Lifting capacity: 7.000 kg - Year: 2009 - Documentation available: Yes - CE marking present: Yes - Serial number: CE344667 - Operating hours: 571 - Lifting capacity: 7000kg - Lifting height: 4255mm Lodpfo Aazz Dox Akqjhn - Overhead clearance: 3060mm - Fork length: 1500mm - Maximum fork width: 1825mm - Minimum fork width: 470mm - Number of wheels: 6 Wheels - Attachment: Side-shift, Fork positioner - Options: Radio, Full cabin - Mast: Duplex - Drive: Electric - Battery information: - └ Battery voltage: 80V - └ Tray length [mm]: 1365 - └ Tray width [mm]: 650 - └ Tray height [mm]: 595 - Transport dimensions: 3300mm x 2010mm x 3060mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, each with 38 stations with divider plate suitable for 76 blocks : - dimensions 1 full block per station -> ± 1.070 mm x 530 mm - dimensions 2 blocks per station -> ± 535 mm x 530 mm max. thickness blocks 75 mm suitable for cooling with ammonia or freon (not included) dimensions (l x w x h) : ± 4.548 x 1.600 x 1.120 mm 38 blocks weighing ± 20 kg or 76 blocks weighing ± 10 kg ± 1482 kg / Cycle (2h30) Lhjdpfxe Aa Riqj Akqon

Condition: used, Year of construction: 2018, travel -x axis 1.300 mm travel -y axis 670 mm travel -z axis 625 mm control HEIDENHAIN - TNC 620 Ledpfx Aks Adfluoqehn number of spindle speeds 12.000 U/min tool taper SK 40 table dimension (L x W) 1.500 x 670 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 6700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in well-maintained condition, has been used exclusively for machining aluminium and plastics, and is available for inspection under power at any time. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Harwi ULTRA PRO 1550 Vertical Panelsaw (Ex Display machine - Zero working hours!) Included – Motor power 4kW-230/400V-50Hz – Sliding rear wall pneumatic – Cutting depth 55 mm – HM saw blade ø 250 mm – Digital reading horizontal/vertical – Electro clamping horizontal – Cutting guides maximum – Longitudinal stop analogue – Attachment roller – Guide block – Longitudinal stop guide block – Program cams – Strip attack – Pneumatic transport rollers – Frame extraction vertical – TRK extraction system horizontal – 24VDC power supply for extraction unit (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Lhjdpfj Adr Ucjx Akqon Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,560 h, load capacity: 3,500 kg, lifting height: 3,700 mm, free lift: 1,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,100 mm, power: 47 kW (63.90 HP), fork length: 1,200 mm, empty load weight: 4,980 kg, total length: 3,030 mm, drive type: Diesel, construction width: 1,323 mm, Rough terrain forklift Load center: 600 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Lhjdpfx Ae Admdrjkqsn Front tire size: 10.5R20 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 7.00-10 Rear tire condition: 80 - 100% Description: The MSI 35, unique in its class, is a semi-industrial forklift that will be a valuable asset to you in the wood and paper industry or in the recycling sector, thanks to the numerous available attachments and the wide range of tires, with which it can be adapted to all types of loads. It has a lifting capacity of 3 tons. The two drive wheels and the hydrostatic transmission enable easy maneuvering towards loads, facilitate positioning and increase work efficiency. For the operator's comfort, the MSI 30 is equipped with a spacious sprung cabin, which reduces noticeable vibrations. Whether in industrial halls or on light terrain such as gravel or meadows, with the MSI 30 semi-large tire forklift, you will always reach your destination. Side shifter, 3rd valve, 4th valve, rear work lights, front work lights, full cabin.

Condition: used, Year of construction: 2022, operating hours: 5 h, 2022 | Wacker Neuson 803 | Used Mini Excavator < 7t | 5 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 13200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 63 inspection points 63 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Like-new machine. At the time of inspection, the machine was in operational condition. No abnormalities were detected during the functional test conducted. The specified transport dimensions refer to the base unit without attachments. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41478 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Lhsdpfx Akj Advwhoqon 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Production line for radiators Lhsdpfx Akozpbl Doqen You can find further information in the attached PDF document. Accessories, tools shown, and clamping devices are included in the scope of delivery only if this is noted in the additional information. We reserve the right to make changes and correct errors in the technical data and specifications, as well as to sell items before they are shipped!