Used Dmg Cmx for sale (408)

Condition: excellent (used), Year of construction: 2014, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, table width: 1,000 mm, table length: 1,250 mm, table load: 3,000 kg, number of slots in tool magazine: 180, Work piece up to 1530 x 1295 x 3500 Kg Tool size up to 650 mm length and 30 Kg Tool size up to 400 x 250 mm and 30 Kg Extende feed rate up to 15 kN-100% ED Coolant Filtration     BLUM Laser NT 3D Quick ser MPC protection 3D Measuring probe DXF Import   Tool package 180 Tool HSK-100A 2 x Cast iron angle plates 1500 mm   15000 Working hours 1e owner machine  X - Travel: 1600mm Dedex Sqptspfx Afnocc Y - Travel: 1100mm Z - Travel: 1400mm B-Axis indexing: 360000° Table Length: 1250mm Table Width: 1000mm Table load: 3000 Number of pallets: 2 Feed rate X-Axis: 60000mm/min. Feed rate Y-Axis: 60000mm/min. Feed rate Z-Axis: 60000mm/min. Spindle Taper: HSK-100ISO/Bt/Mk Power on spindle: 52kW Speeds / ranges: 12000Rpm ATC / revolver: 180 Number of controlled axis:4 Length: 9170mm Width: 6320mm Height: 3969mm Weight: 39500kg

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Dedpfox Sv I Ujx Afnjcc Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: excellent (used), Year of construction: 2003, x-path 350 mm y-path 240 mm Dcsdeu Rdpijpfx Afnsc z-path 340 mm Control Siemens Type 810 D Total power requirement 15 kW Machine weight approx. 1.6 t Space requirement approx. m Universal CNC tool milling machine Type DMU 35 M - 810 D Working range: X-axis (longitudinal stroke of milling slide) 350 mm Y-axis (transverse stroke of milling slide) 240 mm Z-axis (vertical stroke of table slide) 340 mm C-axis - table rotation, manual 360 ° B-axis - table swivel, manual + 105 / -15 ° Table surface (rounded) 280 x 400 mm Table load approx. 100 kg Tool holder SK 40 Spindle speeds stfl. programmable 20 - 6,300 rpm Feed values / rapid traverse stls. 20 - 5,000 mm/min. Feed drive/power 1.6 Nm AC main drive approx. 10 kW Total drive approx. 15 kW - 400 V - 50 Hz Weight approx. 1,600 kg Accessories / special equipment: - SIEMENS path control type 810 D (Processor 840 D) for interpolation in 3 axes with electronic handwheel screen, swiveling control panel, SIEMENS SHOPMILL software (version 05.03.22) with additional DECKEL MAHO Programming area for quick and easy workshop programming. - Manual tool change with SK 40 holder, pneumatic tool clamping - Universal table, manually rotatable & tiltable via handwheels and digital position display position display on the control screen (rotary encoder), enables 5- side machining in one clamping operation - Complete enclosure of the machine with 2 sliding doors, unfortunately currently no coolant tank available as the machine was connected to a central system. was connected to a central system. operating instructions

Condition: used, Year of construction: 2012, operating hours: 28,500 h, functionality: fully functional, machine/vehicle number: 1536580436A, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: TNC620, workpiece weight (max.): 250 kg, rotational speed (max.): 10,000 rpm, overall weight: 4,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 15,000 h, number of slots in tool magazine: 16, Equipment: rotational speed infinitely variable, We are offering this used DMG MORI DMU 50 ecoline universal machining centre, year of manufacture 2012. This is a 3+2 axis machine. If you have any questions or need further information, feel free to send us a message or give us a call. Dcodpfsyf Ihljx Afnjc

Condition: excellent (used), CNC lathe DMG CLX 450 V3, year 2018, Siemens, in very good condition. Dcedjx Hqh Sspfx Afnec

Condition: ready for operation (used), Year of construction: 2001, operating hours: 22,180 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC430, total height: 3,200 mm, table width: 1,250 mm, table length: 1,000 mm, table load: 2,000 kg, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 120, product length (max.): 6,000 mm, number of axes: 5, This 5-axis DMG DMU 125 P hi-dyn was manufactured in 2001. It features a Heidenhain control system, a SK50 spindle taper, and 120 tool stations. With spindle hours totaling 22,180, consider the opportunity to buy this DMG DMU 125 P hi-dyn universal machining centre. Contact us for more information about this machine. • Spindle hours: 22,180 • Tool magazine/stations: 120 • Travel distances: 1250 x 880 x 800 • Tool holder: SK50 • Changer: 120 tool positions in chain magazine • Gripper type: Double gripper • Control: Heidenhain TNC 430 • Working range: Longitudinal: 1250 mm Transverse: 880 mm Vertical: 800 mm • Dimensions: approx. 6 x 8 x approx. 3.20 m height • Weight: approx. 18,000 kgB axis is indexedAdditional data: • Full protection cabin • IKZ through spindle center • Blow air through spindle center retrofitted • Chip conveyor • Coolant tank 600 liters • NC rotary table D1250 x 1000 mm • Max. load at table center 2,000 kg • Clamping grid 9 slots 18H7 a 100 mm • Kit motor with SK50 gearbox – spindle speed 8,000 rpm • Renishaw MP10 SK50 infrared measuring probe • Electronic handwheel • 4 operating modes possible • Flushing gun with pump Technical Specification Taper Size SK 50 Through-spindle Coolant Yes Dcsdpjx Sz Dhjfx Afnoc Dimensions Machine Depth 8000 mm

Condition: used, Year of construction: 2006, DMG DMC 70H Duoblock + RS4 CNC Machining Centre (2006) Manufacturer: DMG Model: DMC 70H Duoblock + RS4 CNC Machining Centre Dodjx S N E Hspfx Afnscc Year of manufacture: 2006 Condition: Used, powered on and ready for demonstration Power-on hours: 92,800 h Spindle hours: 70,200 h Spindle speed: 18,000 rpm Spindle mount: SK40 Tool magazine: 180 positions Internal coolant supply (IKZ): 40/80 bar Belt filter system RS4 pallet station including 4 pallets. Further information to follow.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,186 h, Control Unit Djdpfex Sz Dusx Afnjcc Brand HEIDENHAIN Main Drive Number of axis 5 Tool taper SK 40 This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland Dcsdpfx Asxxn Ukjfnjc X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 6,500 h, number of axes: 3, This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It features a KITAGAWA Hollow Clamping Device, enhanced coolant system at 5 bar, and an integrated parts catcher. Additional attributes include a hinged belt conveyor, I/F for bar feed, and a signal light system. Ideal for turn-mill operations, consider the opportunity to buy this DMG Mori Seiki NLX2500Y 700 horizontal turning machine. Contact us for more information about this machine. Additional equipment • KITAGAWA Hollow Clamping Device with KITAGAWA SS1881K21 for the main spindle • Coolant system with increased pressure (5 bar) • Hinged belt conveyor, right-hand discharge • Integrated parts catcher for the main spindle • Interface for bar feed, LNS Dcjdpfx Afsx D D Uwsnsc • Double foot switch with protective cover • Signal light (red, yellow, green) • Tool overhang length 100 mm for driven Y-axis travel + Tool holder package • Transformer 45000 VA • 15 bar pump with filter Extra Information The machine has only approximately 6,500 operating hours and is in top condition Included in the price of the machine: 12 driven toolholders, including quick-change systems, and 17 static toolholders. Value new: over €30,000

Condition: used, Technical details: x-travel: 800 mm y-travel: 710 mm z-travel: 710 mm speeds:: 6000 U/min Dcedpox A Szijfx Afnoc table:: 500 x 630 mm with tool changer: 40 Plätze spindle taper:: SK 50 total power requirement: 25 kW weight of the machine ca.: 11500 kg

Condition: ready for operation (used), Year of construction: 2003, Make: DMG / DECKEL MAHO Type of machine: DMC 70 eVolution Year of manufacture: 2003 Control system: MillPlus Dcodpfeydfbmox Afnoc Tool holder: SK40 x-travel: 700 mm y-travel: 550 mm z-travel: 500 mm Speed range: 12.000 U/min max. Table load: 800 kg Table dimensions: 900 × 550 mm

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Dcodpfx Asydd Acjfnec

Condition: used, _____ Description: Year of manuf. : 2008 Control : Siemens 840 Speed : 8000 rpm Movement X/Y/Z : 800/800/800 mm Tool holder : HSK 100 In General: Year of manufacture:2008 Speed:8,000 rpm Tool holder:HSK 100 Control system:Siemens 840 D Travel X/Y/Z:800/800/800 mm Table speed:700 rpm Spindle: Dcedpjwx A Hqsfx Afnec Technology:Geared spindle Speed:8,000 rpm Max. power:28 kW Max. torque:727 Nm Tool holder:HSK-100 Turning function:Spindle clamping NC swivel head: Technology:Universal milling head B-axis:0.001° NC- Millturn table: Max. speed:700 rpm Clamping surface:800 x 630 mm Max. table load:800 kg Tool magazin: Technology:Chain magazine Number of stations:120 Tool changer:Double gripper Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system, 80 bar Coolant temperature control:Immersion cooler Position measuring systems:Direct in all axes Automation:2-fold pallet changer Turning function:Spindle clamping + rotary table Workpiece measurement:Preparation for measuring probe Process monitoring:Operating mode 4 Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical separator

Condition: ready for operation (used), Year of construction: 2006, CNC machining center DMC 635V Year of manufacture 2006 Heidenhain TNC 530i control Control approx. 58,400 hours Program run approx. 19,980 hours According to the sticker in the control cabinet, the spindle and motor were replaced in January 2019 at 10,660 hours. No documentation available. Machine runs smoothly Travel distances X 635 Y 510 Z 460 Tool holder SK 40 20-position tool changer Table 790×560 with chip conveyor Weight approx. 3700 kg Dsdpfsw Tir Ujx Afnjcc This offer is directed exclusively at commercial enterprises within the meaning of §14 BGB (German Civil Code). No sale to private individuals.

Condition: good (used), Year of construction: 2009, Ref. -No.: 10616 Manufacturer: DMG Type: DMU 210 P Year of construction: 2009 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 257XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Dcsdpex R R Hcofx Afnoc Tool Taper: SK 50 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm Total Power Requirement: 38 kW No. Of Working Stations: 60 Internal cooling: 40 bar Holding torque: 22.700 Nm Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. The machine can be viewed under power.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Dodpfxsx R R E Ss Afnjcc Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: SK 50 Numbers Of Tools In Magazin: 60 Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, Control Unit Brand HEIDENHAIN Main Drive Number of axis 5 Spindle Speed 18000 RPM Dedpfx Asx Rd Hpsfnecc Tool taper SK 40 This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2019, DMG turning center (Y2019) in outstanding condition with only 2800 spindle hours! Including: Subspindle C-axis Y-axis Chip conveyor Iemca Kid 80 bar feeder Optional: set of static and driven tools + jaws Full technical specifications in the attached documents. Cnc control M730UM CNC with CELOS Turret 12 stations Distance between centers 700 mm X-axis travel 260 mm Y-axis travel ca 50 mm Z-axis travel 795 mm Max. turning diameter ø 366 mm Swing over bed ø 920 mm Swing over cross-slide 740 mm Bar work capacity 80 mm Immediately available for delivery. Please note: WE HAVE A SECOND IDENTICAL NLX 2500/700 SY (2019) AVAILABLE FOR SALE (without barfeeder) AT THE SAME LOCATION AS THIS MACHINE. LET US KNOW IF YOU ARE CONSIDERING BUYING 2 MACHINES. Dedpfeya I Ibsx Afnocc Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 700 mm Dcjdpfxjx Rur Ao Afnoc z-travel 550 mm Control Heidenhain TNC 530

Condition: excellent (used), Year of construction: 2006, operating hours: 13,556 h, turning diameter over cross slide: 324 mm, turning length: 600 mm, turning diameter: 680 mm, spindle bore: 79 mm, rotational speed (max.): 5,000 rpm, Hello, I have for sale a DMG GILDEMEISTER CTX 420 v3 CNC lathe, year of manufacture 2006. The machine is in very good technical and visual condition, equipped with Sinumerik 840D ShopTurn control. Tool probe installed, all tools are driven on the C axis. The lathe is connected to power and can be inspected under working conditions. Only 13,500 working hours. Technical data: Djdpfx Aoyfuazofnecc Working area: * Maximum turning diameter: 680 mm * Turning diameter over bed: 680 mm * Maximum turning diameter over cross slide: 324 mm * Maximum turning length: 600 mm * Spindle bore diameter: 79 mm * Maximum spindle speed: 5000 rpm * Tool measurement probe The lathe has only 13,500 operating hours.

Condition: good (used), Year of construction: 2017, 1 used machining center Brand DMG Type Milltap 700 Year of manufacture 2017 Serial number A00007 Dcsdpfev T Rtiox Afnsc with interchangeable pallet and robot automation Control system: Siemens 840D SL Travel paths: X 700 mm Y 420 mm Z 380 mm Table size 840 x 420 mm Spindle Speed: 10,000 rpm Tool holder: DIN30 25-position tool changer Dimensions and weight Dimensions: 2,500 mm x 1,650 mm x 2,950 mm Weight: approx. 3,400 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and included accessories: Tool changer Chip conveyor Internal tool cooling with high-pressure system 40 bar Preparation 4-axis Oil and emulsion separator Air blown through spindle center Nano package Renishaw measuring kit WH 3 workpiece loading and unloading system with 6-axis Fanuc robot PGN 50 special gripper unit

Condition: good (used), Year of construction: 2013, 1 used tool presetter Manufacturer: DMG Type: Microset Vio 210 Year of manufacture: 2013 Dedpfx Afjqzgw Ajnecc Serial no.: 99510021418 X-axis measuring range: 410 mm Z-axis measuring range: 465 mm With workbench, under-table, 1,400 mm wide, integrated telescopic drawer cabinet, 5 drawers, with 15" Terra monitor, keyboard, mouse, and Dymo 450 label printer

Condition: used, Year of construction: 2022, operating hours: 5,500 h, functionality: fully functional, DMG Mori Sprint 20/8 + IEMCA bar feeder + filter station with high-pressure pump for tools. Year of production: 2022 Operating hours: 5500 Dcodpfx Afox If T Sonoc The machine is connected to the power supply and can be tested.

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter: 200 mm, spindle motor power: 11 W, spindle speed (max.): 5,000 rpm, spindle bore: 50 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, chuck outer diameter: 210 mm, bar diameter (max.): 50 mm, We offer this used DMG Gildemeister CTX 310 eco CNC turning and milling center, year 2008. The lathe is in perfect working condition, and various sets of chucks and driven tools are included in the price. All original paper manuals are available. Dcjdpfx Ajyc Nrgofnsc If you have any questions or require further information, please do not hesitate to send us a message or call us.