Used Dmg Cmx for sale (408)

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026. Cpjdpfeyaqgyox Afneu

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! Csdpoyaqczjfx Afnspu FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, total height: 2,900 mm, table width: 400 mm, table length: 400 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 28,000 rpm, operating hours of spindle: 39,945 h, coolant supply: 40 bar, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: Cjdpfx Aeu Ivkgsfnepu - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Technical data automation: - Available, on request.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,084 h, spindle speed (max.): 4,000 rpm, spindle motor power: 25,500 W, controller manufacturer: SIEMENS, controller model: 840D SL with ShopTurn, number of axes: 3, This 3-axis DMG MORI CLX 450 V6 was manufactured in 2022. It features a Siemens 840D SL control, a main spindle with a maximum speed of 4000 rpm, and a counter-spindle reaching 5000 rpm. The machine includes a 12-position servo turret with driven tool stations and a Y-axis stroke of ±60 mm. If you are looking to get high-quality turning capabilities, consider the DMG CLX 450 V6 machine we have for sale. Contact us for more information. • General configuration: CNC turning center with X, Z, C axes; Y-axis ±60 mm; counter-spindle; driven tools • Operator panel: DMG MORI SLIMline multi-touch, 19″ • Control: Siemens 840D SL with ShopTurn • Main spindle: A2-8"; 17/25.5 kW (100%/40% DC); max 4000 rpm; through-spindle clamping; max bar capacity Ø 80 mm • Counter-spindle: A2-6"; built-in motor spindle ISM 52; 13/14 kW (100%/40% DC); max 5000 rpm; non-through clamping • Tool turret: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); capability to mount 6 BT holders on turret periphery; TRIFIX precision coupling • Measuring systems: Direct measuring systems on X, Y, Z (Z with air-purge option) • Axes and performance: Y-axis stroke ±60 mm; C-axis on both spindles; high-precision 45 mm linear roller guides; increased rigidity for heavy-duty turning Additional equipment • Chip conveyor (chip discharge to the right) • Coolant gun, 5 bar • Optional high-pressure coolant system Cedpfx Afsx E D Uvsnjpu • Optional oil mist extractor AFS 600, 600 m³/h, H13 filtration class • Manual tool measuring probe (MARPOSS) • Optional direct measurement system for Z-axis with purge • Y-Axis Parting Cycle option (V4/V6) • Pressure-differential clamping for main spindle • External chuck flushing (main and counter-spindle) • 4-colour signal tower • Setup package included (C-P7223F) • The machine is ready for connection to a bar feeder.

Year of construction: 2015, operating hours: 48,086 h, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840D Main Drive Number of spindles 2 Tool taper IMS 76 Number of axis 3 Cpodjx D Ndwopfx Afnsu Tail Stock Pinol tool taper VID 30 Tools Number of station 2x16 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2015. It features a Siemens 840 D control, a main spindle and counter spindle, and a bar machine package for efficient operations. Ideal for complex turning and milling tasks, it includes a hinge type conveyor and a coolant system with multiple pressure settings. If you are looking to get high-quality turning capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2009, total height: 2,370 mm, overall weight: 2,500 kg, product length (max.): 2,850 mm, This 4-axis DMG Lasertec 40 laser engraving machine was manufactured in 2009. It features a picosecond laser with an average power of 50W and a wavelength of 1064 nm. The machine offers a travel range of X=400 mm, Y=300 mm, and Z=500 mm, with maximum feed rates of 15 m/min for X and Y axes and 12 m/min for the Z axis. Consider the opportunity to buy this DMG Lasertec 40 laser engraving machine. Contact us for more information. • Machine footprint (incl. operation/maintenance with extraction): Depth 3.5 m, Width 3.0 m, Height 2.5 m • Weight with X-Y table: approx. 2,500 kg • Machine power consumption (with laser and cooling unit): 16 kVA Cedpfxeya Ah Ao Afnspu • Fuse: 40 A at 400 V • Operating voltage: 3/N/PE/400 V/230 V 50 Hz • Maximum permissible deviation: ±10% • Control voltage: 24 V DC • Permissible ambient temperature: +15°C to +35°C • Permissible relative humidity: max. 75% at 20°C • Travel range (with X-Y table): X = 400 mm (longitudinal), Y = 300 mm (transverse), Z = 500 mm (vertical) • Table size: 400 x 300 mm • Feed drive: Digitally controlled AC motor and ball screw in each linear axis • Maximum feed rate: X/Y: 15 m/min; Z: 12 m/min • Guides: Ball screw guides in all linear axes • Measuring systems: X, Y, Z indirect linear encoder • Machine accuracy: P = 0.010 mm (VDI/DGQ 3441) • Laser type: Picosecond laser • Average laser power: 50 W • Wavelength: 1064 nm • Scanner: Planar field lens; focal length 163 mm; field size 65 x 65 mm • Lubrication: Manual central lubrication • Electrical control cabinet: with cooling unit (integrated into the machine) • Cabin: Fully enclosed cabin including roof; laser safety screen (optionally multiple); optimal operator access

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Cpedpfsw Rrcqex Afnsu Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m

Condition: excellent (used), Year of construction: 2015, operating hours: 7,110 h, functionality: fully functional, DMG DMU 65 Monoblock 5-axis machining centre (2015) Manufacturer: DMG Model: DMU 65 Monoblock Year of manufacture: 2015 Condition: used, very good, still in production. Power-on hours: 21,336 h Spindle hours: 7,112 h Control: Heidenhain iTNC 530 X-axis: 735 mm Y-axis: 650 mm Z-axis: 560 mm Tool holder: SK40 Spindle speed: 10,000 rpm Chip conveyor CTS 40 bar Belt filter system 3D probe Documentation Cpjdsx Iwb Iopfx Afnou Tool measurement Further accessories optional.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Cjdsx Tg S Tepfx Afnspu Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: used, Year of construction: 2014, x-travel 600 mm y-travel 500 mm z-travel 500 mm total power requirement --- kW Cedpsycxinofx Afnjpu weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: used, Year of construction: 2014, x-travel 400 mm y-travel 400 mm z-travel 375 mm total power requirement --- kW weight of the machine ca. 7,6 t Cpedoycxihjpfx Afnsu dimensions of the machine ca. --- m

Condition: used, Year of construction: 2001, turning diameter 390 mm centre distance 1850 mm swing diameter 610 mm control SINUMERIK 840D turning speeds 20-4000 U/min spindle bore 79 mm bar capacity 65 mm total power requirement 33 kW Control System Siemens Sinumerik 840D Bed Design: 4-rail bed Guideways: Roller guides Working Area Maximum swing diameter: 610 mm Standard turning diameter: 390 mm Distance between spindles: 1850 mm Traverse travel cross/longitudinal – Slide 1: 605 / 1470 mm Y-axis – Slide 1: 210 mm B-axis – Slide 1: 240° Traverse travel cross/longitudinal – Slide 2: 227 / 1440 mm Longitudinal travel – Slide 3: 1460 mm Turning and Milling Spindle – Slide 1 Number of tools: 80 Tool holder: HSK-A63 Max. spindle speed: 12,000 rpm Max. drive power 40/100% duty cycle: 10 / 15 kW Indexing unit: 1.0° Csdpfox Tu Susx Afnspu Clamping torque (locking): 500 Nm Spindle 1 – Left Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Spindle 2 – Right Max. bar capacity: 65 mm Spindle nose faceplate: 220 h5 Spindle bore: 79 mm Internal draw tube: 68 mm Front bearing diameter: 140 mm Main Drive 1 and 2 – Left / Right Max. drive power 40/100% duty cycle: 25 / 33 kW Speed range: 20 – 4000 rpm Rated speed: 700 rpm Max. torque 40/100% duty cycle: 840 / 460 Nm Drive type / design: AC / 1 Design: Integrated spindle motor C-axis speed (rapid traverse): 100 rpm C-axis torque (holding torque): 350 Nm C-axis indexing accuracy: 0.025° Slide 1 Rapid traverse speed X/Ys/Z: 46 / 24 / 60 m/min Feed force X/Ys/Z: 11 / 16 / 11 kN Position resolution X/Y/Z: 0.001 mm Ball screw X (d × p): Ø40 × 15 mm Ball screw Ys (d × p): Ø40 × 10 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 2 Rapid traverse speed X/Z: 24 / 60 m/min Feed force X/Z: 7.5 / 11 kN Position resolution X/Z: 0.001 mm Ball screw X (d × p): Ø32 × 15 mm Ball screw Z (d × p): Ø50 × 25 mm Slide 3 Rapid traverse speed Z: 60 m/min Feed force Z: 12 kN Position resolution Z: 0.001 mm Ball screw Z (d × p): Ø50 × 25 mm Tool Changer – Turret Head Gripper type: Double gripper Control type: Cam-controlled Tool change time G1/G2: 1.3 / 2.6 s Tool Spindle Speed 4000 rpm Coolant Unit 180 liters

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, total height: 2,840 mm, table load: 600 kg, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, tool weight: 8,000 g, number of axes: 3, This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Additional equipment • Job Shop package • Renishaw PP40 wireless workpiece probe • TS27R tool measurement probe • Scraper-type chip conveyor • Coolant tank capacity: 200 L (left side) • Coolant pump: 20 bar internal through-spindle coolant • Machine enclosure roof Cpsdpjx D Nigofx Afnou • LED work area lighting Machine Benefits Technical Machine Benefits • Table size: 850 × 650 mm • 24-position automatic tool changer with double gripper • Drive type: ball screw drives with ac servomotors • Voltage: 3 × 400 v Extra Information The machine is in fully functional condition Tested and confirmed by DMG service report, including accuracy measurements Complete documentation is available Currently disconnected from power Dimensions Machine Depth 3065 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, overall weight: 10,000 kg, PREMIUM LISTING – DMG MORI DMU 60 eVo (2017) | 5-Axis | TNC 640 | 120 Tools | Automation-Ready | 40 bar Cjdpfoygky Tox Afnspu Overview Offered for sale is a high-specification DMG MORI DMU 60 eVo 5-axis machining centre, Made in Germany, equipped with a robust configuration suitable for demanding production requirements. The machine is automation-ready, making it ideal for lights-out manufacturing and future integration of pallet or robotic systems. Key Highlights • Year: 2017 • Control: Heidenhain TNC 640 (ERGOline® Control, 19” screen) • 5-axis NC swivel rotary table (B-axis -5° to +110°, C-axis 360°) • 120-position tool magazine • High-speed spindle up to 18,000 rpm, SK40 BIG-PLUS • Automation-ready + extended M65 interface • DMG MORI geometric inspection protocol available Configuration & Options (as equipped) Control / Software / Operation • Heidenhain TNC 640, ERGOline® Control, 19” display • Operating mode 4 – process monitoring in production • Electronic handwheel 5-Axis Table / Measuring • NC swivel rotary table 600 × 500 mm • B-axis -5° to +110°, C-axis 360° • Max load: 400 kg • Direct measuring systems (rotary axes) • Renishaw OMP60 optical infrared probe Spindle / Tooling / Magazine • Spindle interface: SK40 BIG-PLUS 18,000–20,000 rpm 35 kW (40% ED) / 25 kW (100% ED) • Tool magazine: 120 positions (chain magazine with double gripper) • Tool breakage detection TRS2 (contactless detection; suitable for small diameters) Coolant / Chip Management / Enclosure • Internal coolant supply (IKZ), 40 bar (paper band filter tank 600 L) • Chip conveyor • Extended chip flushing (additional flushing of work area) • Chip wash gun • Spindle centre air blast (selectable via M-function, conditioned air with low oil content) • Rotating safety window (rotating viewing pane) • Oil & emulsion mist separator (mechanical) • Automation Ready • Extended M65 interface Connectivity / Service • DMG MORI Messenger (installation kit for machine connection) • DMG MORI Netservice client (remote diagnostics support via external PC)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 3, This DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. • 2 x 16 fold Sauter star VID 30 • Siemens 840 D • Excentric turning and milling operation • TC alternating speed • Counter spindle • Glass scales Y1, Z1, Z2, Z3, X1, X2, X3 Additional equipment • 980 liter coolant with 8 bar/20 L and 20 bar/40 L programmed by M function Codpex D Nd Dsfx Afnepu • Pater band filter • Chuck rinsing device for main outside • Chuck rinsing device for counter outside • Coolant spray gun • Hinge type conveyor • Bar machine package • Window cleaning with compressed air • SK package for alu machining • Tool breakage Artis CTM

Condition: ready for operation (used), Year of construction: 2011, operating hours: 63,655 h, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 28,000 rpm, spindle motor power: 29,000 W, swivel angle C-axis (max.): 360 °, number of axes: 5, This DMG Mori HSC 55 linear Universal Machining Centre was manufactured in the year 2011 and has 61913 control hours, 59275 machines on hours, 10986 program run hours, and 10631 Spindle running time (spindle exchange at approx.7300 hours). The machine has a spindle speed of 20 - 28000 rpm and a capacity for 30 tools. It is equipped with a pallet changer, control is Heidenhain iTNC 530 control unit and has 5 axis. Machine Benefits Qualitative Machine Benefits • The machine has capacity for 30 tools • Pallet changer Technical Machine Benefits • Measuring length: 400 x 400 mm • Axial run-out of the clamping surface Ø 350 mm • Axial stability of the work spindle: 0,005 mm • Spindle nose : 250 mm • Tool holder hsk-a63 according to din69893 • Pickup tool changer 16 places (chain) • Active cooling unit for main spindle and linear drives// active cooling unit for control cabinet Codpfex D Eqgjx Afnopu • Direct absolute measuring system incl. Sealing air • Coolant/blast air changeover • Z-axis extension to z = 460mm Extra Information Machine still under power.

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN iTNC 530 Table dimensions 500 x 380 mm table weight 500 Kg c-axis 0.001º ( ± 360º) 0 b-axis 180 ° rapid traverse X-axis 80 m/min feeds 50 m/min spindle turning speed range 18.000 U/min spindle taper BT- 40 spindle drive 30 kW Internal cooling system 40 bar Cpjdpfx Afsxluf Ajnou handwheel HEIDENHAIN HR-410 Working hours 51.770 h Spindle hours 14.627 h total power requirement 50 kVA weight of the machine ca. 6,5 t

Condition: used, Year of construction: 2011, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm Control SIEMENS SINUMERIC 840D table-size 2.900x700 mm table weight 2.150 Kg tool adaptor SK 40 DIN 69872 Codpfev Da T Hjx Afnopu workpiece length - max. 300 mm workpiece weight 6 kg workpiece dia. 80/130 mm 30 fach main drive 18,4/14 kW speed 14.000 mm/min rapid traverse 40 m/min feed 40 m/min Machine on 18.859 h Spindle hours 5.666 h internal coolant system feed 40 Bar/600 l Chip coveyor inkl. Machine on 19.230 Spindle hours 5.998 h total power requirement 55 kW weight of the machine ca. 14.520 kg Acceleration in the axis 4 m/s2 -Cleaning gun -Portable handwheel -Direct measurement system

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain Cpjdpfsyb S Ihex Afnsu greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: SIEMENS, controller model: 840D Powerline, This DMG Gildemeister Twin 65 was manufactured in 2004. It features a Siemens 840D Powerline control, 2x Sauter revolver with 12x VDI 30 each, and a revolver 1 with Y-axis. It includes a parts pick-up device, belt filter system, coolant tank of 980L with 20/40 bar, and a bar loading magazine IRCO Profimat 65. Reach out for more information about this machine. Additional equipment • Parts pick-up device NC controlled • Belt filter system with coolant tank 980L with 20/40 bar • Bar loading magazine IRCO profimat 65 • Bar passage max. 65mm • Bar length 3000mm • Various tool holders Cpedpfx Aoyaik Rsfnju Machine Benefits Technical Machine Benefits • 2x sauter revolver with 12x vdi 30 each • Revolver 1 with y axis Extra Information Machine still under power

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (min.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer. Cjdjyazdpepfx Afnepu

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package 6 months ago (not in use since) TECHNICAL DETAILS Centre distance: 700 mm Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Taper: MT5, live center Centers without center tip Overhang length for driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assembly units: Integrated MK4 bearing for center Chip and cooling system Scraper belt chip conveyor: with magnetic separation, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air discharge system for tool holders Compressed air discharge system for tailstock center In-line filter for cooling system FEATURES - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki portal robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO Csdpfxexamqmj Afnopu - Machine does not include a chuck

Condition: used, Manufacturer: DMG Gildemaster Country of Origin: Italy CNC Control: FANUC 16i-TB with 7 axes CE Declaration of Conformity Technical Data - Number of axes: 7 - Number of spindles: 2 Travel distances: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: Csdpsygl N Njfx Afnjpu Tool drive power: 1.1 kW Max. speed: 6,000 rpm IEMCA SMART 316 bar feeder Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 mm Machine weight: approx. 2,200 kg Main spindle and counter spindle with new bearings!

Condition: excellent (used), Year of construction: 2019, Delivery at the beginning of June 2026!!! Control: CELOS with Heidenhain TNC 640 Milling head: Universal milling head with controlled A-axis HSK63A Spindle options: Spindle tool holder HSK-A 63 Tool magazine: Tool magazine, wheel type, 63 positions HSK63A Coolant / Chip removal: Through-spindle coolant system, 80 bar, frequency controlled; oil/emulsion mist extraction unit; cooling device with air blast Csdpfxex Uqyke Afnopu Measuring / Monitoring: Heidenhain infrared probe SK 40, 3D quickSET; MPC Machine Protection Control Further options: Operating mode 4 Options for HEIDENHAIN control: Electronic handwheel Documentation: 1 set documentation in German; electrical schematic in German Display language: German

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2006. It features a Siemens 840D powerline control with Shopmill, and robust traverse paths of 1000 mm in X, Y, and Z axes. Equipped with a high-speed range up to 8000 rpm, dual gear stages, and an HSK 100 tool holder with up to 360 positions. Includes two 800x800 mm pallets and a B-axis at 0.001° precision. Contact us for more information about this machine. Additional equipment • Electronic handwheel Cedpjyaau Tjfx Afnepu • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Measuring probe Renishaw OMP 60 • Chip flushing gun Machine Benefits Technical Machine Benefits • Tool holder: hsk 100 • Tool positions: 270 / 360 • Number of pallets: 2 • Pallet size: 800 x 800 mm Extra Information Machine still under power