Used Dmg Cmx for sale (384)

Condition: like new (used), DMG Mori NZX CNC – Turning and milling machine Tool setter: Renishaw RP3 Left and right measuring arm in original wooden box Nledjzd Ugkepfx Akaoc

Condition: like new (used), Year of construction: 2019, operating hours: 31,241 h, functionality: fully functional, See AB in the attachment Njdpfx Akjxqm Tvoajlc

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table Nlsdpfxexgnz Te Akaoc - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 630 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, workpiece height (max.): 900 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 2,800 mm, total length: 5,500 mm, total width: 3,500 mm, table width: 400 mm, table load: 400 kg, rotational speed (min.): 14,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 14,000 rpm, coolant supply: 70 bar, spindle motor power: 18,500 W, spindle nose: BT 40, number of slots in tool magazine: 60, tool length: 400 mm, tool diameter: 140 mm, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained DMG MORI machine, complete with all documentation, available for inspection while powered on. - Table with 0.001° precision Nodpfxezdgcfe Akaslc - 60 tool capacity - Chip conveyor - High-pressure system KNOLL 70 bar - Tool setting device Metral + - Fixed cycles - 48 zero-point offsets - Coordinate system rotation - Fanuc 31iA control

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) Nsdpfjx Icyvex Akaolc -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: like new (used), Year of construction: 2017, operating hours: 1,075 h, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: Fanuc, table width: 500 mm, table height: 500 mm, table load: 500 kg, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, Horizontal Machining Center DMG MORI NHX 5000, 2nd Generation Control: M730UM Celos X: 730mm Y: 730mm Z: 880mm Milling Spindle Interface: HSK63-A Speed: 20-15,000/min Power: 37 kW Torque: 250 Nm Pallets Number: 2 Size: 500x500 Load capacity: max. 500 kg Type: Grid pattern Tool magazine Positions: 60 Type: Rotary Coolant system: Knoll system, 70 bar Mist extractor Nledpfx Akszdllwoaec The machine comes from a research institute and has only run for approximately 1075 spindle hours to date. Condition: as new Availability: short notice

Condition: excellent (used), Year of construction: 2015, operating hours: 16,927 h, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, Manufacturer: DMG MORI Type: DMF 260-11 linear Year of manufacture: 2015 Control system: Heidenhain 530 Main spindle renewed in 2026 Technical data: Travel distances: - x-axis: 2,600 mm - y-axis: 1,100 mm - z-axis: 900 mm - b-axis: +/-100 degrees - c-axis: nx 360 degrees Main spindle: - Speed range: 20 - 10,000 rpm - Drive power (40/100%): 44 / 32 kW - Torque (40/100%): 303 / 275 Nm - Tool holder: SK 50 Work table: - Fixed table with integrated rotary table - Table clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool positions: 60 - Chip-to-chip change time: 7.5 s - Operating hours: approx. 16,927 h Nodpfx Akozfzbkeaslc Technical features: - Internal cooling system 40 bar - Spray gun for chip extraction - Rotating viewing window Accessories: - Paper band filter 600 l - Chip conveyor - 2x oil and emulsion mist separators - Electronic handwheel

Condition: excellent (used), Various accessories for DMG Mori NLX. Nsdpfx Akezfh T Toaelc 1- AWG EWS 50.60V5NLIK (Axial boring and milling head, offset axis, EWS - Varia) 2- EWS63.6032NL (Rotating, continuously adjustable swivel head) 3- 2 pcs. 17.BMT40NL (Combination holder for internal and external cooling, diameter 40 mm) 4- 2 pcs. 17.BMT50NL (Combination holder for internal and external cooling, diameter 50 mm) 5- 2 pcs. 8.BMT25NL (Cross mount, steel height 25) 6- 2 pcs. 4.BMT25NLIKX95 (Longitudinal mount, steel height 25) 7- 2 pcs. 4.BMT25NLX70 (Longitudinal mount, steel height 25)

Condition: used, Year of construction: 2000, 5-axis machining center Manufacturer: DMG, Type: DMU125 P, Year of manufacture: 2000, Control: Heidenhain TNC430 Machine with HV milling head and NC rotary table. Spindle connection: ISO 50 Spindle speeds up to: 8000 rpm Travel ranges: X 1250 mm, Y 880 mm, Z 800 mm, A-axis and B-axis Tool magazine: 120 positions. Machine documentation available. Nodpfx Aksuwnzvoajlc

Condition: good (used), Year of construction: 1993, CNC universal milling machine, DMG MORI, Type: MH 600 C Control system: MAHO 532, year of manufacture: 1993. Equipped with an automatic swivel milling head (G17/G18) and B-axis rotary table. Without tool changer. Further data can be found in the data sheet. Complete machine documentation and data backup available. Good overall condition. Nledpfeiihxhex Akasc

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,960 h, controller manufacturer: HEIDENHAIN, number of axes: 2, This 2-axis DMG GILDEMEISTER CTX 320 linear V3 was manufactured in 2004. A versatile turn-mill centre, it offers robust construction and precision for complex machining tasks. If you are looking to get high quality turning and milling capabilities consider the DMG CTX 320 linear V3 machine we have for sale. Contact us for more information. Additional equipment • Bar package with a pick-up device and parts conveyor belt • Bar guide for 1.5 metre bars and workpiece stop • Hainbuch SK 65 clamping top • Indicator light for machine's operating status • Cooling unit for air conditioning the control cabinet • OPTIONAL: A basic tool kit / A large selection of Hainbuch SK 65 clamping heads Machine Benefits Technical Machine Benefits Njdpfxsx Nr T Uj Akaolc • 12-position tool turret with driven tools at all stations Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,064 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D powerline + Shopmill, spindle speed (max.): 8,000 rpm, spindle motor power: 44,000 W, number of axes: 5, This 5-axis DMG DMC 100 H was manufactured in 2005. It features a Siemens 840D powerline control with Shopmill, a 1,000 mm travel in X, Y, and Z axes, and a speed range up to 8,000 rpm. The machine includes a HSK 100 tool holder, 270/360 tool positions, and two 800 x 800 mm pallets. Consider the opportunity to buy this DMG DMC 100 H horizontal machining centre. Contact us for more information. Additional equipment Nljdpfx Ajyaaugskasc • Electronic handwheel • Operating mode 4 • Oil mist extraction • Internal cooling (IKZ): 40 bar • Paper band filter • Chip flushing gun Machine Benefits Technical Machine Benefits • Number of pallets: 2 • Pallet size: 800 x 800 mm • Tool positions: 270 / 360 • Measuring probe: renishaw omp 60 • Spindle power: 44 kW (40% duty cycle) or 32 kW (100% duty cycle) • Maximum torque: 1241 Nm (40% duty cycle) or 827 Nm (100% duty cycle) Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 53,201 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,585 mm, controller manufacturer: SIEMENS, tool weight: 10,000 g, number of axes: 7, This 7-axis Gildemeister GMX 400 Linear was manufactured in 2005. It features a maximum turning diameter of 640 mm and a turning length of 1585 mm. The machine is equipped with a Siemens Sinumerik 840D Powerline CNC control and offers rapid traverse speeds of 40 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 Linear turn-mill centre we have for sale. Contact us for further details. Nljdpey Uvxxsfx Akajc • B-axis swivel range: ±120° • C-axis resolution: 0.001° • Rapid traverse (X/Y/Z): 40 / 24 / 60 m/min • Maximum turning diameter: 640 mm • Standard turning diameter: approx. 400 mm • Maximum turning length: 1585 mm • Bar capacity: approx. 90–92 mm • Chuck diameter: 250 mm • Counter spindle speed: 4000 rpm • Maximum torque: approx. 600–730 Nm • Milling spindle: Integrated motor spindle (ISM) with B-axis • Milling spindle speed: 12,000 rpm • Milling spindle power: 13.2 / 22 kW • Milling spindle max. torque: approx. 100 Nm • Turret: 12-position driven turret • Tool shank: 40 mm, DIN 69880 • Tool length limits: 200–350 mm • Maximum tool diameter: 80–140 mm • Maximum tool projection: 60–70 mm • Connected load: 100 kVA • Additional notes: Linear drive technology; Made in Germany; Machine under power and available for inspection Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit- Chip Conveyor Not Included Technical Specification Through-spindle Coolant No Nljdpfx Asy Uvnyekaoc

Condition: ready for operation (used), Year of construction: 2012, operating hours: 27,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, overall weight: 21,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG MORI DMC 100U duoBlock was manufactured in 2012. It features a pallet clamping surface of 1000 × 800 mm, rapid traverse rates up to 60 m/min, and a high-speed spindle at 18,000 rpm. The machine includes a 60-position tool changer and a 980-litre coolant system. Accessories like a chip conveyor, oil mist collector, and BLUM laser tool measurement enhance its functionality. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 100U duoBlock machine we have for sale. Contact us for more information. • Working table: • Number of pallets: 2 (working/preparation area) • Pallet clamping surface: 1000 × 800 mm • Pallet weight: 630 kg • Axis travels: • B: 210° • C: 360° • Movements: • Acceleration (X/Y/Z): 7.0 / 6.5 / 6.5 m/s² • Resolution (X/Y/Z): 0.001 mm • Position tolerance (X/Y/Z): 0.006 mm • Position tolerance (A/B/C): 8 / 6 / 5 arcsec • Workpiece capacity: Nsdpfex D Eh Eox Akaelc • Max diameter: 1000 mm • Max height: 1600 mm • Max weight: 2000 kg • Spindle: • Torque: 119 Nm (40% ED) • Tool changer: 60 positions • Coolant system: 980-litre high-pressure through-spindle with paper band filter • Availability: In excellent condition, available for demo (video available) Additional equipment • 7 extra pallets • Chip conveyor • Oil mist collector • Infrared measuring sensor • BLUM laser tool measurement • 3D Quick Set preparation • Cooling unit • Air blast through spindle • Maintenance kit (filters, wipers, installation tools) • Full manuals (English, Estonian, and digital copy)

Year of construction: 2011, condition: ready for operation (used), Swing diameter over bed/facing slide: 330mm/260mm, max. turning diameter: 200mm, max. turning length: 450mm, travel X/Z: 160mm/450mm, rapid traverse: 30m/min, speed: 5000rpm, tool stations: 12, tool holder: VDI30, max. workpiece weight: 100kg. Machine dimensions X/Y/Z: approx. 3300mm/1750mm/2400mm, weight: approx. 3800kg. Documentation available. An on-site inspection is possible. Nlodpfx Ajzdkphskasc

Year of construction: 2011, condition: ready for operation (used), A CNC universal lathe is available. Swing diameter over bed/facing slide: 680mm/465mm, max. turning diameter: 465mm, max. turning length: 1050mm, travel X/Z: 300mm/1050mm, rapid traverse: 20m/min, speed: 3250rpm, tool positions: 12, tool holder: VDI40. Machine dimensions X/Y/Z: approx. 3300mm/1950mm/2500mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Njdpezdkpbjfx Akajlc

Condition: excellent (used), Year of construction: 2008, DMG DMC 635 V TNC530 Heidenhain Vertical CNC Machining Center The machine has undergone a thorough inspection, and the spindle has been overhauled, with bearing replacement and spindle taper grinding performed. It is in very good technical condition. Technical specifications: Travel range (X/Y/Z = 635/510/460) Working area (travels): X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm. Spindle: Rotational speed: 20 – 8,000 rpm. Spindle taper: SK40 Work table: Dimensions: 790 x 560 mm. Maximum load: 600 kg. Tool magazine: Capacity: 20 tools. Feeds: Rapid traverse (X/Y/Z): 25 m/min Nlodozfarzopfx Akaoc Control: Heidenhain iTNC 530. Dimensions and weight: Weight: approx. 3,900 kg. Dimensions: approx. 3.0 m x 2.3 m x 2.5 m. The machine has a cast iron construction and is designed for precise machining of parts, often used in series production. It is possible to equip the milling machine with a 4th-axis rotary table. The machine can be inspected and tested at our company's premises.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 - Number of spindles : 3 MAIN SPINDLE - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 52 [mm] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 38 [mm] - C axis indexing precision : 0.0001 [°] Nlsdpey I Dixofx Akasc TURNING-MILLING SPINDLE - X/Z stroke : 455/800 [mm] - Y stroke : 105 [mm] - B Axis stroke : 120 [°] - B axis indexing precision : 0.0001 [°] - Tool type : HSK50 - Spindle speeds : 30000 [rpm] - Spindle power : 9 [kW] TOOL CHANGER - Tool magazine capacity : 76 LOWER TURRET - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 48 [kVA] MACHINE HOURS - Number of working hours : 18186 [h] EQUIPMENT - CNC : FANUC 31i MAPPSIV - Linear scales - Tailstock option with counterspindle - Tool probe - Workpiece probe : Renishaw - Bar loader : IEMCA KID 80 - Electric transformer

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Nedpjy U Hkljfx Akaolc Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Nedpfx Akoy U Hkfeaslc Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: 810D, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,600 h, Equipment: chip conveyor, rotational speed infinitely variable, Very nice DMC 1035 V ECO with Siemens control system Year of manufacture: 2012 Program run hours: 7,600 h Nledpox Dci Tjfx Akaoc SK 40 with 10,000 rpm spindle 30-position tool changer Production package with measuring probe and tool length measuring device in the work area Internal cooling Chip conveyor Available immediately.

Condition: used, Year of construction: 2016, x-travel 600 mm y-travel 560 mm z-travel 510 mm feed 36 m/min control Siemens type Shopmill 840 D table surface area 800x500 mm workpiece weight 600 kg Tool changer 30 spindle taper ISO SK40 turning speeds 12000 U/min Nljdpfx Ajzdcbdokasc weight of the machine ca. 5 t dimensions of the machine ca. 4000x5000x3000 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2015, operating hours: 43,196 h, functionality: fully functional, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, controller model: Fanuc 310 is, spindle speed (max.): 5,000 rpm, counter spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! CNC turning center with comprehensive accessories! A wide range of like-new spare parts is also available! TECHNICAL DETAILS Travel X1 axis: 165 mm Travel X2 axis: 165 mm Travel Y1 axis: 80 (+50 / -30) mm Travel Z1 axis: 678 mm Travel Z2 axis: 640 mm Travel W2 axis: 690 mm Rapid traverse X/Y/Z/W axis: 30 m/min Acceleration X/Y/Z/W axis: 5 m/s² Main and counter spindle Power main spindle: 20 / 25 kW Power counter spindle: 17 kW Speed main spindle max.: 5,000 rpm Speed counter spindle max.: 5,000 rpm Bar diameter main spindle max.: 65 mm Bar diameter counter spindle max.: 45 mm Number of turrets: 2 Number of rotating tools per station: 12 driven positions Tool system: VDI 30 Speed driven tools: max. 4,000 rpm MACHINE DETAILS Control: Fanuc 310 is Nedpfeza Alhsx Akaolc Coolant tank capacity: approx. 650 l Coolant pump capacity per turret: max. 20 l/min Pump pressure: 7 bar Connected power: 91 kVA Dimensions & Weight Machine dimensions (L x W x H): 4,500 x 1,990 x 2,300 mm Machine weight: approx. 9,500 kg Operating hours Power-on hours: 64,274 h Operating hours: 43,196 h EQUIPMENT IEMCA MASTER 865 MP 43 L bar loader Drive for slides 1 and 2, all 12 positions C-axis for main and counter spindle Y-axis for slide 1 Chip conveyor, belt type Counter spindle collet cleaning with coolant Workpiece discharge including belt Mechanical preparation for oil mist filter Electrical and software interface for bar loader Angular synchronization between main and counter spindle Automatic machine shutdown 2 additional inputs/outputs, 4 M-functions Thread drilling without compensation chuck Piece and time counter Software for polygonal turning for slides 1 and 2 Constant cutting speed Helical interpolation for slide 1 Spindle speed monitoring Four-color warning light Cooling unit for control cabinet Collet chuck type MPF 65/140 without axial feed for main spindle, max. diameter 65 mm Manual collet changer type SACO MPT65/140 and MPF65/140 Differential pressure for counter spindle with the possibility of setting two different clamping pressures 1 set of soft jaws for collet chuck type SMW 175-BBD Collet chuck type SMW 175-BBD for counter spindle including adapter for spindle adjustment Tool wear monitoring system for CNC FANUC Sister tool selection system for Tool Monitor CNC FANUC External flushing of jaws and collets with coolant on main and counter spindle

Condition: used, Year of construction: 2010, turning diameter 700 mm turning length 1250 mm control Siemens 840 G Ergoline spindle passage 104 mm spindle speed: 4000 spindle motor 35/45 kW max. torque on the spindle 600/700 Nm Spindlespeed subspindle 4000 U/min milling head -swivable ° turning speed range - milling 00 U/min tool taper Capto C6 tool magazin: 36 y-axis +/- 200 mm mm weight of the machine ca. 18,5 t Used CNC- Lathe with sub- spindle and milling head - milling head full axis + 1° clamping - chipconveyor - aircondition for elextric box - new milling spindle in 2025 - absolute scale X/Y/Z1 axis - Shop Mill dialig programming - 8/20 bar coolant programmable - band filter system - Bar package (Partscatcher, prepared for ba magazin) Nlsdpfxey T R Rmo Akajc Machine sold without jaws.