Used Dmu 40 Evo for sale (234)

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 2,800 mm, total width: 2,450 mm, table load: 800 kg, overall weight: 8,800 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 4,060 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 104V linear was manufactured in 2006. It features an X-axis travel of 1040 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a robust table size of 1250 x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 104V linear vertical machining centre we have for sale. Contact us for further details. Isdpozvxb Nefx Ap Dsih • Table size: 1250 × 600 mm • Condition: Good working condition • Note: Machine was purchased as retrofitted from DMG in 2011 and spindle was replaced for a new one in the past. Additional equipment • Electrical cabinet air conditioning • Spindle temperature control • Internal mist separator for the working area • Workpiece probe Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2003, x-travel 1.600 mm y-travel 1.250 mm z-travel 1.000 mm size of pallet 1.000 x 1.250 mm control SIN840D power capacity at 40 % load 38,00 KW spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW max. torque at 40% / 100% load 288 / 187 Nm tool taper SK50 feed X/Y/Z/-axis 20 - 15.000 mm/min rapid traverse X/Y/Z 60,00 m/min B - axis -150° / +80° x 0,001 ° feed B-axis 3.600 ° / min C-axis 360 x 0,001 ° Rapid motion C- axis 1 - 3.600 U / min. table load 3.000 Kg tool magacine with 240 tool diameter 110 mm wotkpiece diameter with 2 vacant positions 250 mm tool length - max. 650 mm weight of tools max. 15,00 kg total power requirement 75,00 kW weight of the machine ca. 55,00 t dimensions of the machine ca. 12,50 x 8,00 x 4,20 m 5-axis machining center with control SIEMENS Sinumerik 840D incl. ShopMill electronical handwheel operating mode 4 240-position tool magazine 4-position pallet storage system TS641 measuring probe BLUM laser Isdszpbfdspfx Ap Doih coolant system coolant through the spindle chip conveyor coolant cooling Machine can be inspected under power

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details. • Control: Heidenhain iTNC 530, 3D-Path / 3D-Contouring • Rapid traverse: 30 m/min • Main drive: AC 13/9 kW • Tool taper: ISO 40 / SK40 DIN 69871 • Tool clamping: DIN 69872 • Tool changer: 20 positions, SK40, double gripper • Table size: 1,200 × 560 mm • Measuring system: Direct measuring system X/Y/Z with air purge • Coolant / air blast: Switchable via M-function at spindle nozzles Ijdpfezv Sylex Ap Dsih • Operation mode: Process monitoring with manual intervention • Software: Smart TNC incl. DZF and engraving cycle • Data communication: DMG Netservice Euro ISDN • Operating hours: 24,915.5 h (control ON) / 12,002.7 h (spindle ON) Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Iijdjv Sy Sfspfx Ap Djh Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,419 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 350 kg, number of slots in tool magazine: 24, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Iedpfx Aszpxdwsp Djih Travel range, X-axis: 630 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 560 mm Tool magazine slots: 24 Tool holder: SK 40 Rotary range, C-axis: 360° Table clamping surface: 600 x 1,000 mm Table diameter: 600 mm Maximum table load: 350 kg Table weight: 800 kg Number of T-slots: 8 / 1 T-slot width: 14 H12 / 14 H7 T-slot spacing: 63 mm MACHINE DETAILS Number of axes: 5 (3+2) EQUIPMENT Controlled NC swivel milling head (B-axis) NC rotary table integrated in the fixed table (C-axis)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 20,082 h, travel distance X-axis: 700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMC 70 H duoblock was manufactured in 2007. It features a Siemens 840D control unit and a robust tool holder type of SK40. The machine is equipped with hydraulically clamped clamping towers, ensuring secure workpiece handling. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 70 H duoblock horizontal machining centre we have for sale. Contact us for further details. Iedpey Ndibefx Ap Deih • Apparent power: 60 kVA • Nominal current (max): 86 A • Fuse protection: 100 A • Voltage: 400 V • Frequency: 50 Hz • Control voltage: 24 V Additional equipment • 2 hydraulically clamped clamping towers (workholding) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1994, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, For sale is a Deckel Mori 70 V gantry machining center. The machining center is ready for immediate use and fully functional. Technical specifications: Year of manufacture: 1994 Grundig Dialog 112 control system X travel 700 mm Y travel 550 mm Z travel 500 mm SK 40 chuck mount Brushless AC servo motor Drive type: Continuously variable 0-8000 rpm Feed speed: Continuously variable 10000 mm/min Table size: 900 x 550 mm Table load: 0.8 t Machine weight: approx. 7.2 t Knoll scraper conveyor belt Internal cooling system Ijdpfx Asv T U Udep Deih Rapid traverse x/y 30000 mm/min Rapid traverse z 20000 mm/min Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT. Viewings available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are available! Machine Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website.

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: SIEMENS, controller model: 840D, total height: 2,700 mm, total width: 1,950 mm, overall weight: 7,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25,000 W, product length (max.): 3,308 mm, number of axes: 3, This 3-axis DECKEL MAHO DMP 60V was manufactured in 2003. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 425 mm. The machine is equipped with a spindle speed range of 20 to 18,000 rpm and a tool changer with 25 magazine positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMP 60V vertical machining centre we have for sale. Contact us for further details. Iiedpfxoznc T Ho Ap Djh - Control Unit: Siemens 840D / SINUMERIK 840D powerline- Spindle Speed Range: 20 to 18,000 rpm- AC Main Drive Power: 35/25 kW (40/100% ED)- Tool Changer / Capacity: 25 magazine positions- Tool Holder Taper: HSK-A 63- Worktable Type: Swivel / Pallet Changer- Clamping Surface Area: 2x 660 x 400 mm- Internal Coolant Supply (IKZ): 40 bar / 23 l/min / 600 L tank- Coolant / Filtration System: Interlit Kompakt-Filteranlage (Type: SPB 3/600, Filter surface: 0.7 m², Tank capacity: 600 l, YOM: 2003) with gravity paper belt filter unit- Coolant / Chip Management: Scraper belt chip conveyor (1000 mm discharge height) with auxiliary 200 L coolant tank- Accessories: Electronic handwheel, integrated blow-off/spray gun attached to front cabinet- Machine Dimensions (Height): 2700 mm (Machine height), 2645 mm (Transport height)- Machine Dimensions (Width): 1950 mm (Without control panel), 2990 mm (With control panel / door open), 1950 mm (Transport width)- Machine Dimensions (Length): 3308 mm (Machine length), 3850 mm (Transport length with swivelled control)- Required Floor Area: 6000 x 4000 mm (Standard), 6000 x 5200 mm (With chip conveyor), 6000 x 5300 mm (With chip conveyor and coolant system)- Transport Dimensions (L x W x H): Approx. 3400 x 2000 x 2700 mm- Documentation Included: Machine Handbook

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, operating hours of spindle: 44,377 h, coolant supply: 40 bar, spindle nose: HSK 63, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is fully operational and can be inspected while powered on. Deckel Maho DMF 250 Year of manufacture: 2004 X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm B-axis: +/- 105° Iiedpfx Aozaq Ecjp Dsh Work table: 3100 x 900 mm Spindle: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 tools Control system: Heidenhain iTNC 530 Equipped with: - Chip conveyor - Coolant system through spindle, 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (L x W x H): 6000 x 3800 x 2950 mm Machine weight: 25,000 kg Jakob Friedrich J. Friedrich Werkzeugmaschinen Mistelstrasse 18 75334 Straubenhardt Warehouse: Auf der Hub 10 76307 Karlsbad-Ittersbach

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Iisdpfx Aex Nr Tujp Djh Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective, display defective (loose connection)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,831 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,700 mm, total width: 2,800 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, product length (max.): 3,300 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 63V vertical machining centre was manufactured in 1997. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a tool magazine capacity of 24 tools and a maximum spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for further details. • Table: • Size: 800 × 500 mm • Operating hours: 19,831 h (actual counter from control) • Condition: Powered, connected, and fully operational • Note: Control upgrade from Sinumerik 810D to 840D Iisdpeyw Rmvjfx Ap Dsh Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 1998, Deckel Maho 5 axis vertical machining center in good condition with only ca 8600 spindle hours. Iisdpsz Hbn Refx Ap Deh Fully simultaneous 5 axis machining, controlled with CAM system. Heidenhain TNC426 control, 12000 rpm spindle speed and 30 positions in tool (SK40) magazine READY FOR IMMEDIATE DELIVERY. Travel X 800mm Travel Y 700mm Travel Z 600mm Max spindle speed 12000 rpm Tool changer/magazine SK40 Working spindle SK Places in tool magazine 30 Control Heidenhain TNC426 Rapid traverse X, Y and Z axis 24 m/min Spindel hours 8400 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit- Chip Conveyor Not Included Technical Specification Through-spindle Coolant No Iisdpfxsy Uvnys Ap Djh

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t Ijdpfx Ajywgtxop Doih EQUIPMENT Swivelling rotary table Documentation

Condition: used, X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation. Iedpezuwxqofx Ap Djih

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 30216 & 30277, feed length X-axis: 1,000 mm, travel distance X-axis: 1,000 mm, Universal tool milling machine Make: MAHO Model: MH 1000 2x available! Isdpfxep S Scho Ap Dsih x-way 1000 mm tool holder SK 40 digital display . Head tiltable +/- . Table tilt and swivel +/- . Quill stroke . - 3-axis digital display - Universal table 1.250 x 740 mm (T-slot 16 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - 6 autom. quill feeds 0,02/0,03/0,05/0,08/0,12/0,20 mm/Umdr. - central lubrication, manually operated The machine can be inspected with pleasure. Immediately ready for use Free loading, transport no problem.

Condition: ready for operation (used), Year of construction: 2009, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 635 mm Y-AXIS TRAVEL: 510 mm Z-AXIS TRAVEL: 460 mm RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 10000 rpm; 9 - 13 kW; 57 - 83 Nm; SK-40 TABLE SIZE: 790 x 560 mm MAX ADMITTED LOAD: 600 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS MAX TOOL DIAMETER: 80 (130) mm Iedezlu S Nspfx Ap Dsih MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 6 Kg CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 3650 Kg OVERALL DIMENSIONS: 3375 x 2440 x 2665 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. Iijdpey S Azhjfx Ap Deh • Rapid Traverse (X / Y / Z): 30 m/min • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2007, x-travel 3.600 mm y-travel 920 mm z-travel 820 mm control iTNC530 Heidenhain B - axis +/- 90 x 1 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X-axis 100 m/min rapid traverse Y-axis 60 m/min rapid traverse Z-axis 60 m/min spindle turning speed - stepless 20 - 10.000 U/min tool taper SK50 power capacity at 100 % load 32,00 kW power capacity at 40 % load 48,00 KW max. torque at 40% / 100% load 294 / 196 kW table surface area 4.200 x 900 mm number of T-slots 9 T-slot - distance 100 mm T-slots 1x 18H7 / 8x 18H12 table load capacity - central/maximum 4.200 kg tool magazin: 80 tool diameter 115 mm wotkpiece diameter with 2 vacant positions 160 mm tool length - max. 360 mm weight of tools max. 12,00 kg total power requirement 85,00 kW Iedpfx Aey Sbikjp Djih weight of the machine ca. 32,00 t dimensions of the machine ca. 11,50 x 6,60 x H3,30 m Vertical machining center with HEIDENHAIN iTNC530 control, swivel milling head, partition wall, tool rack magazine with 80 positions, chip conveyor, coolant system, NC-extension table Ø700mm, operating mode 4.

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m Iiedpfx Aex R Em Dsp Djh CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg Iiodjyaci Hjpfx Ap Dsh feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: used, Year of construction: 2004, x-travel 1040 mm y-travel 600 mm z-travel 500 mm feed 30 m/min control Siemens type 840 D table surface area 1250x600 mm table load 800 kg Tool changer 30 Fach spindle taper ISO SK 40 turning speeds 12000 U/min total power requirement 24 kvA weight of the machine ca. 8,8 t dimensions of the machine ca. . m Chip Conveyor Quick-Clamping System The tech. Data are manufacturer or operator information and therefore non- Iiodpfx Apjzdcb Ro Deh binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Isdpfoz D Aquox Ap Deih Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Current geometry protocols available Year of manufacture: 2001 Operating hours: 56,376 Spindle hours: 26,451 Technical data: Travel range X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% ED); 10 kW (100% ED) Speed: 18,000 rpm Tool interface: HSK 63 Magazine capacity HSK 63: 60 Equipment: - 3D path control MillPlus IT - Horizontal tool changer with dual gripper - Automatic swivel milling head Ijdpfsu Rnlujx Ap Doih - Rotating viewing window - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis HSK 63 (only in conjunction with HSK 63 motor spindle) - Tool interface for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4: Extended manual operation - Coolant gun with pump - Tool breakage monitoring HSK 63, mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent operation of chip conveyor - Internal coolant supply, switchable from 40 bar to 80 bar

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Iiedpjy Szq Uefx Ap Doh Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe