Used Dolev 800 for sale (8,351)

Condition: excellent (used), Year of construction: 2021, operating hours: 11,514 h, functionality: fully functional, machine/vehicle number: 20210202, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 640, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel X-axis: 670 mm Travel Y-axis: 820 mm Travel Z-axis: 600 mm Spindle speed (min.): 18,000 rpm Spindle operating hours: 11,514 h Coolant supply: 40 bar MACHINE DETAILS Apparent power rating: 90 kVA Control manufacturer: Heidenhain Control model: TNC 640 Total weight: 20,000 kg Input voltage: 400 V Full load current: 125 A Bljdpfx Afjymbb Ietod Max. current load: 200 A Short-circuit resistance: 25 kA Voltage: 400.50 V/Hz Net weight: 20,000 kg Machine number: 20210202 EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, cutting height (max.): 800 mm, cutting width (max.): 1,500 mm, saw band length: 8,970 mm, saw band speed: 13,500 mm/s, section length (max.): 3,000 mm, Machine with large cutting capacity, ideally suited for continuous operation in steel construction! TECHNICAL DETAILS Cutting area rectangle: 3000 × 1500 × 800 mm Flywheel diameter: 620 mm Saw band dimensions: 41 × 1.3 mm Maximum saw band length: 8,970 mm Saw band speed: 310 – 810 m/min (infinitely adjustable) Automatic feed max.: 5,000 mm/min Manual feed max.: 6,000 mm/min Hydraulic tank capacity: 250 l Pump delivery rate: 40 l/min MACHINE DETAILS Control model: CNC control EXOR PLC Saw motor power: 7.5 kW Hydraulic motor power: 11 kW Total power: 23 kW Machine weight: approx. 9,000 kg Blsdsymw R Sspfx Afted EQUIPMENT Hydraulic workpiece clamping Automatic or semi-automatic sawing operation Feed table / material feed Large flywheels for smooth running & long band life Heavy-duty industrial design Hydraulic and coolant unit integrated

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT De Ultrix 800 RT is een multifunctioneel bewerkingscentrum met 5 geïnterpoleerde assen en een beweegbare portaalconstructie voor snel frezen, draaien, slijpen, boren, tappen, afwerken, ontbramen en voorbewerken van complexe onderdelen. Bij gebruik voor draaien verticale draaibank: - Draaibereik: 1100 mm - maximaal gewicht van het werkstuk: 700 kg - 40/30 kW op de tafel - Maximaal koppel op de tafel: 1500 Nm - Maximale snelheid van de tafel: 800 rpm!! - hydraulische klemming op tafel - gereedschapsconus voor draaien: KM63 - Gereedschapswisselaar met 150 posities, waarvan 24 voor draaien. Bij gebruik voor frezen, slijpen, boren, ... bewerkingscentrum: - X-as: 800 mm - Y-as: 900 mm - Z-as: 600 mm - A-as: -30° / 110° - C-as: continu - maximaal gewicht van het werkstuk: 700 kg - 55/40 kW op de spindel - maximaal koppel op de spindel: 18 / 16 Nm - maximaal 40.000 toeren per minuut - gereedschapsconus voor frezen: HSK-E40 - Gereedschapswisselaar met 150 posities en 126 gereedschapsposities voor frezen, slijpen en boren Lijst met opties die op de machine zijn gemonteerd: 1 - Hogesnelheidsspindel met 40.000 tpm 2 - tafeldiameter 700 mm met hydraulische klemming 3-150-positie gereedschapswisselaar 4 - spanentransportband 5 - koelsysteem met terugwinning 6 - regeling van de koelvloeistoftemperatuur 7 - hogedrukkoeling (40 tot 70 bar) deurspindel 8 - rookafzuigsysteem 9 - doos voor het verzamelen van chips 10 - Voorinstelsysteem en gereedschapsintegriteit: laser- en mechanische meetsonde voor meetinstrumenten 11 - Renishaw-sonde Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Bsdpfxextgkae Afteld Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: ready for operation (used), total width: 2,011 mm, NIKON-Metris X: 1000 – Y: 2500 – Z: 800 mm Het LK V-SL- model beschikt over een revolutionair ontwerp dat de beste scan- en inspectieprestaties levert van alle werkende CMM's op de markt. De multisensor LK V-SL coördinatenmeetmachine onderscheidt zich door zijn unieke karakter en voldoet aan de eisen van de automobiel- en lucht- en ruimtevaartindustrie. Dankzij de mogelijkheid om zeer nauwkeurige metingen uit te voeren (HA – High Accuracy), versterkt dit systeem als referentie-CMM voor metrologielaboratoria en biedt het een submicronnauwkeurigheid voor toepassingen die de hoogste meetnauwkeurigheid ingewikkeld. Laatste kalibratie: 19 Renishaw-besturingssysteem: -Probekopcontroller: PHC 10-2 -Interfaceselector 191-2 -Probe-interface PI 200 -TP 200 Renishaw-meettaster Laserbesturingssysteem. LC60DX De LC60Dx is ontworpen voor 3D-laserscanning met hoge snelheid en een gemiddeld bereik op coördinatenmeetmachines (CMM's). Het apparaat biedt uitstekende prestaties bij het scannen van grote onderdelen, zoals mallen, autopanelen of structurele componenten, met een nauwkeurigheid tot 9 micron. Renishaw PH10M - Gemotoriseerde indexerende meetkop Rotatie-assen: A-as: ±180° B-as: 0–115° Indexeringsstap: 7,5° → wat een totaal van 720 positieve positieve positieve resultaten oplevert Interface: Autojoint/M8-aansluiting (compatibel met modulaire testsystemen zoals Renishaw TP200, SP25M of Nikon/Metris laserscanners) Maximaal stylusgewicht: ca. 300gr Maximale styluslengte: tot 300 mm Positie herhaalbaarheid: ±0,4 µm (0,0004 mm) Toepassingen: Meting van onderdelen met complexe vormen (turbinebladen, mallen, behuizingen, enz.) Wordt gebruikt in combinatie met probes zoals Renishaw SP25M, TP200 of Nikon/Metris LC15Dx Compatibel met de meeste CMM-merken (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) SCHUNK - snelwissel-klemsysteem voor gebruik op CNC-machines. Het is bedoeld voor het vastzetten van pallets, het opspannen van werkstukken op de machinetafel met een zeer hoge positioneringsnauwkeurigheid (tot 0,005 mm). Fabrikant: SCHUNK (Duitsland) Model: VERO-S NSE plus 90 Type: Snelwisselklemmodule Modulediameter: 90 mm Bedrijfsdruk: 6 bar Klemkracht: tot 25.000 N (25 kN) Materiaal: gehard roestvrij staal Bodpfsxl Hxuex Aftjld Bediening: Pneumatische bediening met mechanische zelfvergrendeling Positioneringsnauwkeurigheid: ≤ 0,005 mm

Condition: ready for operation (used), empty load weight: 7,000 kg, + 3 freeskoppen Max longitudinal travel X-axe: 1500 mm Max cross-travel Y-axe: 800 mm Max travel Z-axe: 500 mm Power on spindle: 15 HP / 11 kW Type of millinghead: ISO 50 Spindlespeeds: 31 > 1400 rpm Bodjycy Ekopfx Aftsld Table size: 2000 x 600 mm Digital screen: Heidenhain 3 axes

Condition: ready for operation (used), total height: 3,300 mm, total width: 3,450 mm, total length: 6,000 mm, controller manufacturer: Siemens, empty load weight: 17,000 kg, Model: FTV 850 Koeling door spindel Het werkgebied kan in twee secties worden verdeeld Bedpfx Afowxz D Uetsld 2 magnetische tafels Bewegende kolom, vergelijkbaar met Mazak VTC / Unisign / Hedelius Zware chassisstructuur Longitudinal travel X-axe: 1800 mm Crosstravel Y -axe: 850 mm Travel Z-axe (Height): 800 mm Dimensions clamping space - table: 2300 x 900 mm Universal (2x 360°): ISO 50 Boring head (1 x90°): 19 kW

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! Zonder freeskop kunt u klassieke verticale bewerkingen uitvoeren. Met de multihoekfrees (MA-25) kunt u veel verschillende vlakken bewerken. MA-25 2-assige freeskop - 30 kW - 2000 tpm - 1500 Nm koppel C-as bereik: 0-360° - 2,5° Bereik van de A-as: +/- 110° - 2,5° Koeling via spindel: 40 bar Totaal vermogen: 67 kW Geen foundation nodig! De Johnford DMC-serie brugfreesmachine met dubbele kolom en beweegbare tafel is vervaardigd uit een brug/kolomconstructie van gegoten Meehanite-ijzer, die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met C-frame. De brugfreesmachines zijn verkrijgbaar in uitvoeringen met beweegbare tafel en met schuifkolom (vaste tafel), met afmetingen variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De lange basisconstructie biedt volledige ondersteuning aan de tafel over de gehele Y-asbeweging van 130 cm, waardoor zeer zware werkstukken bewerkt kunnen worden. De Y- en Z-assen dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt. Dit maakt nauwkeurige bewerkingen en strakke toleranties mogelijk tijdens bewerkingen met hoge snelheid. Doordat er geen tafeloverhang is, worden de helling en de draaiing van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat de stijfheid verder verhoogt. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange levensduur van het gereedschap en een goede oppervlakteafwerking van het werkstuk. De combinatie van twee schroefbandtransporteurs en een rupsbandtransporteur garandeert een volledige spaanafvoer met minimale handmatige reiniging. Bovendien wordt eindige-elementenanalyse (FEA) gebruikt voor het ontwerp van elke brugfreesmachine, waarbij de effecten van realistische omstandigheden, zoals trillingen, warmte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Bjdoxp Sk Dspfx Afteld Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm

Condition: ready for operation (used), Camu decoiler 3 ton Bsdjx Imlpspfx Aftjld Dimeco straightener - 800 x 1,1 mm - 11 x 60 mm straightening rolls - 4 x 60 mm feeding rolls - weight: 850 kg CNC mircrofeeding unit Pressix excentric press - 100 ton - 65 strokes/min - adjustable stroke: 10 130 mm - table: 950 x 660 mm - max opening: 370 mm

Condition: ready for operation (used), nominal power (apparent): 45 kVA, controller manufacturer: Fanuc Series 18i-MB, total length: 11,000 mm, total width: 6,000 mm, empty load weight: 24,000 kg, Type: MCH-800 Distance of spindle end to table center: 300 1300 mm Distance of spindle center to table surface: 50 1050 mm Max workpiece dimensions: 1400 x 1200 mm cooling through spindle X-axes: 1350 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: (5x) 800 x 800 mm (continuous indexing) Max weight on the table: 2 ton Admission in spindle (ISO): ISO-50 Power on the spindle: 18,5 kW Toolstore: yes Blodpfx Afov Sfqgstsd Tools: 90 positions Frequency: 1 > 6000 rpm (option!!)

Condition: ready for operation (used), Metris coördinatenmeetmachine (CMM) gemaakt in het Verenigd Koninkrijk, nu eigendom van Nikon Metrology. Structuur van granieten basis met keramische brug en keramische Z-ram (LK Ceramic Bridge Technology) Geschikte probes: Renishaw PH10M/MQ, TP20, TP200, SP25M, SP80 of Nikon LC15Dx / LC50Cx laserscanners Laatste Kalibratie: 19-09-2024 Functies: Keramisch brugontwerp – zorgt voor dynamische stabiliteit en stijfheid Hoge nauwkeurigheid en snelheid voor dimensionele inspectie van grote of complexe onderdelen Geschikt voor contact- en laserscansensoren Typische toepassingen: lucht- en ruimtevaart, automallen, gereedschappen en precisiefabricage CAMIO MULTISENSOR CMM-SOFTWARE INLCUSIEF: Renishaw (optioneel): - Sonde-interface PI 200 - Interfaceselector IS1-2 - Renishaw PH10MQ - Nikon LC60D - Nikon LC15Dx - TP 200-sonde - SM25-1 - SM25-2 - SM25-3 - FCR 25 Autochange Rack - AOR3 Autochange Rack - Bol Renishaw + Motivair Luchtdroger Blodpfx Ajxl Hxnjftjd

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 320, empty load weight: 8,500 kg, total length: 5,000 mm, total width: 2,720 mm, total height: 2,420 mm, Correa A16 X: 1800 - Y: 800 - Z: 800 mm CNC Longitudinal travel X-axe: 1800 mm Cross travel Y-axe: 800 mm Bledpfx Afjyn Sq Netod Travel Z-axe: 800 mm Dimensions clamping space- table: 2000 x 630 mm Power on spindle: 15 HP Admission in millinghead (ISO): ISO 50 Max speedrange: 25 > 3250 rpm

Condition: ready for operation (used), total height: 3,900 mm, total width: 2,900 mm, total length: 8,000 mm, controller manufacturer: Heidenhain, empty load weight: 13,000 kg, Type: TMML6-centrum Maximale afstand van kolom tot midden van spindel: 1210 mm (diepte van de kiel) Gereedschapswisselaar met 30 posities Spaantransportband Kan achteraf worden uitgerust met nieuwe Heidenhain-besturing Originele tafel kan opnieuw worden gebruikt of een T-gleuf vloerplaat om hogere werkstukken te kunnen bewerken Bjdjv St Efopfx Aftold Longitudinal travel X-axe: 3023 mm Crosstravel Y -axe: 800 mm Travel Z-axe (Height): 1528 mm Dimensions clamping space - table: 4200 x 1000 mm Max Height of workpiece: 2000 mm Power on spindle: 20 kW Admission in millingheadspindle (ISO): ISO 50 Max speedrange: 50 > 1980 rpm

Condition: ready for operation (used), controller manufacturer: Siemens, empty load weight: 55,000 kg, 2-koloms portaalfreesmachine tussen de kolommen: 2550 mm!! 5-assige freeskop koeling door spindel totaal vermogen: 90 kVa Longitudinal travel X-axe: 8000 mm Cross travel Y-axe: 2500 mm Blsdpfxjv Sfkaj Afted Travel Z-axe: 800 mm Dimensions clamping space- table: 9000 x 2500 mm Max height workpiece: 1200 mm Power on spindle: 20 kW Power needed (KVA): 90 ACCESSORIES & TOOLING: toolchanger - 28 toolpositions

Condition: excellent (used), axle configuration: 3 axles, first registration: 03/2019, total width: 2,550 mm, total height: 1,750 mm, suspension: air, color: black, Year of construction: 2019, Axle configuration Make axles: Renders Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Functional Bjdpex Ua Eijfx Aftjld Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Identification Registration number: OV-02-ZB Additional information Please contact Arie or Pedro for more information

Condition: ready for operation (used), Year of construction: 2009, operating hours: 22,000 h, controller manufacturer: HEIDENHAIN, controller model: TurnPlus V7, This 4-axis DMG CTX beta 800 was manufactured in 2009. It features a maximum turning length of 600 mm and a tool turret with 12 stations. The machine is equipped with a Heidenhain TurnPlus V7 control and has a maximum spindle speed of 5,000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG CTX beta 800 horizontal turning machine we have for sale. Contact us for further details. • CE marking: Yes • Max. turning length: 600 mm • Tool turret: 12-station • Tool holder/interface: VDI 40 • Connected load: 65 kVA • Rated current (max): 75 A • Mains voltage: 400 V • Control voltage: 230 V • Control power consumption: 150 W • Operating hours: approx. 87,000 h Blsdpfeypkmfex Aftsd • Spindle hours: approx. 22,000 h • Condition/Maintenance: Linear guide Z1 recently replaced; Turret drive S2 recently replaced; Well-maintained, fully functional • Viewing: Under power possible by appointment • Documentation: Service and maintenance reports; Further documentation and images available upon request Additional equipment • Driven tools from WTO • Optional available: Extensive accessory package (details on request)

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, CNC Vertical Machining Center “BRIDGEPORT VMC 800” With Heidenhain TNC 410 path control Year of manufacture: 2000 Bedpeypb Rhsfx Aftold Travel ranges: X 800 Y 500 Z 500 Spindle speed range: 0 – 10,000 rpm, stepless With the following accessories: Fixed angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 tool magazine slots (SK 40) Fully enclosed safety cabin with sliding doors and internal lighting Various SK 40 tool holders Electronic handwheel Coolant system with reinforced 20 bar pump Chip conveyor Operating manual

Condition: used, Year of construction: 2016, The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options: Tool magazine for 30 tools Tool length measurement, tool breakage detection Factory-installed preparation for chip conveyor (left) Magazine (HSK) for 155 tools Air blower at the workpiece Signal light (end of machining: yellow) Additional: Work area lighting Coolant gun Air blower through the spindle 70 bar preparation, including interface for high-pressure system Automatic opening/closing of the operator door Mazak Monitoring System B RMP 60 (only/H/V) Collision monitoring by Brankamp 2 Renishaw TS27R tool presetting devices NC rotary table Holding device for vertical use of the NC rotary table Table center partition for pendulum machining 3D model of the work area in STEP format 5-axis milling technology Knoll compact filter KF400/2300 (filtration capacity 400 l/min, tank volume 2300 l/min) 1) High-pressure cooling 70 bar, 7 pressure stages Chip conveyor, hinged belt design Additional M-codes: 1 set = 2 M-codes Preparation for dual extraction system (mechanical nozzle) 0.198 mm Transformer for the European market 1 set of manuals in electronic form on CD 1 set of adjustment tools Foundation set (anchor bolts + plates) MAZAK standard paint Work area lighting Bodpfx Asx Idwioftsld Additional items: AirFresh FMN V12 extraction system (installed on both sides and coupled with a door sensor) Holding device for vertical operation of the rotary table 2 x Renishaw TS27R integrated tool presetting devices Spare parts: Y-axis motor, tool magazine Linear axis shifter motor Rotary axis shifter motor Cylinder for swivel unit width: 3500 mm length: 820 mm X-axis travel range: 3000 mm Y-axis travel range: 800 mm Traversal range Z-axis: 720 mm min. distance spindle nose to table top: 140 mm max. distance from spindle nose to table top: 860 mm max. table load: 2500 kgf B-axis: ± 110 degrees Working spindle taper: HSK63 Max speed: 18,000 RPM Min. Drehzahl: 35 min-1 Rated power: ( 100 % continuous operation) 33,0 kW Emergency travel speed X-Y & Z axis: 50 m/min Working table width: 3500 mm Worktable length: 820 mm Width of T-slots: 18 mm Number of T-slots: 7 Distance of T-slots: 100 mm Table height from the floor: 870 mm Tool changer number of tool places (Standard): 30 Number of tool stations (optional): 48 Tool selection method: shortest path tool shank: Steep cone 40 With occupied side positions: 80 mm With available spaces: 130 mm max. tool weight: 8kgf Total weight of all magazine tools: 150 kgf max. tool length: 350 mm Tool change time: (Span-to-Span) 4.7 s Connected load: 400 V / 50/60 Hz Air pressure: 5 – 9 bar Air volume: 260 l/min Tank capacity: 500 l Dimensions (Height x Length x Width): 3376 x 5480 x 4051 mm Weight approx: 16300 kg colour: Gray / Black

Year of construction: 1990, operating hours: 23,710 h, condition: ready for operation (used), This dryer from Motan is in machine storage at Plastima Used Machinery. The dryer is from 1990 and is in good condition. Bsdpfx Aomgadpoftold – Brand: Motan – Model: MDC 800 – Construction year: 1990 – Working hours: 23,710

Condition: used, Comprehensively tested and refurbished used Morton-Lödige model FKM800 304 stainless steel ploughshare mixer. Manufacturer: Morton Material: Stainless steel (304) Capacity: 240-560 litre working capacity. 800 litre total capacity (product dependent) Mixing Chamber: 1,800mm straight side x 760mm diameter Discharge Type: Pneumatically Operated Bomb Door Style Discharge Valve Type Of Blades: Stainless Steel Shaft with Ploughshare Blades Motor: 15kW Motor with Gearbox Also Includes: 2 Stainless Steel Side Entry Choppers Direct Driven by 4kW Motors. Bljdjykn Suepfx Afted Click on the link below to see a video of the machine running. Dimensions: 1,800mm straight side x 760mm diameter

Condition: used, Year of construction: 1999, table length 850 mm table width 550 mm ampere 70 A control CNC MITSUBISHI 32bit axis stroke (X,Y,Z) 550 / 850 / 450 mm weight of the machine ca. 6 t dimensions of the machine ca. 2,4 x 2,65 x 2,68 m Spark Erosion Machine / Cavity Sinking EDM Machine The machine is in a very good condition. Equipment / Eccessories: - Y-travel at electrode change and loading position: 1180 mm - integrated C-axis working head speed adjustable: 10/20 rpm Bledpfxju Dbtlj Aftjd - integrated C-axis / working head measuring resolution: 0.001 mm - load capacity without changer: 50 kg - load capacity with changer: 10 kg - max. head load: 200 kg - max. distance tool carrier plate to work table: 585 cm - min. distance tool carrier plate to work table: 125 mm - working tank: - lifting tank dimensions (W x D x H ): 800 x 1100 x 480 mm - dielectric height programmable/automatic: 440 mm - filter cartridge version: cartridges integrated - electrode changing system / pick-up plate magazine Positions: 20 - electrode weight /single electrode: 15 kg - total changer: 60 kg - generator FP 70 Ampere, multipulse - electrode changer: 20-fold pick-up linear changer - electric hand-operated bottle - C0² fire extinguishing system integrated / dielectric cartridge filter system

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Blsdpfeyn Ncpex Aftod Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. Bledpfxeymnv Ej Afted - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz Bedpfx Afeymm Ereteld - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, Year of construction: 2017, Milling machines Travel distance X: 600 mm Travel distance Y :450 mm Travel distance Z: 300 mm HSC-machines Number of axis: 5 milling machine / machining center Control: Heidenhain TNC 640 spindle chuck: HSK-A63 spindle revolutions: 20000 rpm Speed range to: 20000 U/min table size X: 450 mm table size Y: 450 mm max. workpiece weight: 300 kg tool changer: 170 - time input Power : 25 kW Torque: 120 Nm Rapid traverse: 50 m/min feed rate: 50000 mm/min spindle cooling chip conveyor control Heidenhain 5-axis CNC machining center Bljdpfx Ajym Rrvsftod Heidenhain TNC 640 control 170-position tool changer HSK-A63 spindle interface KNOLL chip conveyor KNOLL oil filtration system KF 400 / FKA 620 HABOR cooling unit suitable for steel machining high precision for tool and mold making automated workpiece handling for series production

Year of construction: 2021, operating hours: 5,797 h, condition: ready for operation (used), This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN Bledpfex D Rlpjx Aftjd • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS present