Used Dolev 800 for sale (8,347)

Condition: new, height of stroke ca. 700 - 1000 mm 0 500 kg Kedpfx Aozugg Rjiijdr

Condition: used, machine/vehicle number: 8799, Inlet: 400 x 800 mm Rotor diameter: 400 mm Kdodeyr I Hbspfx Aiier Width: 800 mm Rotor blades: 5 Stator blades: 2 Drive: 45 kW Sprue mill, granulator, plastic mill, cutting mill

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 Ksdpfx Ajzrpt Isiisdr overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m Kdsdpezrptnefx Aiijr stored in dismantled condition - Video at seller’s site before dismantling available

Condition: reconditioned (used), Year of construction: 2002, CNC vertical machining center MIKRON VCP 800 W With path control Heidenhain iTNC 530 Year of construction: 2002 Travels: X 800 Y 650 Z 500 Speed range: 0 - 20,000 rpm infinitely variable With the following accessories: Rigid angular table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully protected cabin with sliding doors and interior lighting Kdodpfx Aijviq U Esier Electronic handwheel Tool measurement in the work area ( BLUM laser ) 3 D measuring probe infrared Renishaw Chip conveyor Coolant device 4 pcs. Height-adjustable machine shoes Operating instructions

Condition: used, Offer consist of: Calender production system -Rilecart R 800 -Rilecart R 422 -Rilecart FAR-5/55 MK2 -SETMASTER -Kugler All-Inclusive Service Package Kjdpfx Aszru Scsiiedr We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. Kdodpfx Aozvn Theiijr The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: excellent (used), Year of construction: 2005, operating hours: 36,012 h, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 318 cm³, injection pressure: 2,470 bar, injection weight: 291 g, mold height (min.): 250 mm, Arburg 470C-1500-800 injection molding machine with conveyor belt and picker (257) Year of production: 2005 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 45 Kjdpfx Aezfhx Aoiisdr Injection weight [g]: 291 Injection pressure [bar]: 2470 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 44.9 Working hours [h]: 36012 Weight [kg]: 4860 Dimensions [mm]: 4400 x 1600 Core string: 1x Robot socket: euro12 Feed hopper: NO

Condition: used, Year of construction: 1987, material width 800 mm material thickness 0,4 - 2,5 mm no. of straightening rolls 8 straightening roll diameter 53 mm number of draw-in rolls 2 diameter of draw-in rolls 160 mm material thickness at 800 mm material width (Niro) 0,6 mm material thickness at 800 mm material width (steel 1,0 mm material thickness at 150 mm material width (Niro) 2,5 mm material cross-cut 975 mm² speed - 35 m/min power requirement 2,1 kW weight 7,0 t dimensions (WxDxH) 2,0 x 2,0 x 2,3 m Kdedpjzrpufefx Aiisr Straightening machine RM 8-53/160-800 with infinitely varibale drive, motoric driven straightening rolls, supporting rolls, hydraulic lifting of the roller cassette, motorized adjustment of the rolls, hydraulic threading wedge, side guidance at the inlet

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1289892, Oscillating stainless steel granulator with enclosed product feed and manual dosing unit. The mill is mounted on a stainless steel frame with feet. Various sizes of sieve inserts are included with the system. The installation is fully documented with all details, including parts lists, operating manual, drawings, etc. Electrical connection: 380 V, 50 Hz, 2.5 Amp. The MG-800 has been qualified in accordance with GMP guidelines and is fully documented. Packaging, loading, and load securing on a truck are included in the sale price. Kdodpfx Ajvt Sywoiier

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. Kdsdezvbldspfx Aiijr The steel substructure is only partially present.

Year of construction: 2003, condition: good (used), This band saw, from our renowned brand SICA S.p.a., is currently stored at Plastima Used Machinery. The saw was manufactured in 2003 and is in used, but good condition. Ksdpjzunwdofx Aiisdr Brand: SICA S.p.A. Model: TRS/U 110-800 Year of construction: 2003 Power: 5.5 kW Maximum pipe outer diameter: 110 to 800 mm

Condition: excellent (used), Year of construction: 2012, URBAN welding and cleaning line consisting of two 4-head URBAN AKS 6410 welding machines, including an automatic conveyor belt running perpendicular to the welding machines, with a URBAN SV 800/2 automatic corner cleaning machine with two heads and an infeed/outfeed table. Operated in single-shift production, in very good condition, programmed for VEKA profiles. Includes welding supports, safety fences, and tools for the automatic corner cleaning machine. WINDOWS-based control system, network compatible. Kdedpfxozu S Exe Aiior Product capacity: at least 200 frames/sashes in 8 hours.

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Kdjdoxy Tmnepfx Aiior

Condition: new, Year of construction: 2026, We have high-quality load banks from our series production for sale, with the following technical specifications: Condition: NEW Areas of application: - Load testing of emergency generators and uninterruptible power supply (UPS) systems - Grid stabilization through power consumption - Engine test benches Technical features: - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW Kjdpjfm T Eujfx Aiiodr - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load levels can be set via any key combination - Test report printout - Test automation, automatic start of load levels Operation and control: - Directly via the keypad on the load bank - Via remote box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Includes electrical wiring diagrams Includes manual Includes software Delivery and commissioning possible for an additional charge.

Condition: used, Year of construction: 2007, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, overall weight: 8,300 kg, Mikron HSM 800 – High Speed Machining Center Year 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production. Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation. The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine. Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H). Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process stability and thermal accuracy. Control: Heidenhain iTNC 530 Spindle speed: 24000 - rpm Travel Y-axis: 600 - mm Dimensions of the clamping surface: 900 x 600 mm Travel Z-axis: 500 - mm Travel X-axis: 800 - mm Dimensions (LxWxH) approx.: 3000 x 2500 x 2800 mm Weight approx.: 8,300 kg Year of construction: 2,007 Condition: in working order Terms of payment: 100% prepayment before pick-up Kjdpfxoy Tkc Ae Aiijdr Terms of delivery: From foundation under power: Yes

Condition: good (used), Year of construction: 1989, turning diameter over cross slide: 820 mm, spindle bore: 128 mm, turning diameter over bed slide: 515 mm, turning length: 2,000 mm, total length: 6,000 mm, total width: 1,900 mm, total height: 1,800 mm, spindle speed (max.): 1,400 rpm, Centre lathe Kodpozpwwpefx Aiijdr VDF BOEHRINGER - DUE 800 MACH-ID 9760 Make: VDF BOEHRINGER Type: DUE 800 Year: 1989 3 Axis HeidenHain ND780 dro 3 chuck 400 mm 4 chuck 800 mm Steady rest closed ca 400 mm Steady rest C-Type ca 400 mm DBC Turning Length: 2000mm Swing over bed Ø: 820mm Swing over cross slide Ø:515mm Spindle bore: 128mm Spindle power: 30kW Bed width: 560mm Speeds / ranges: 1400Rpm Quill Ø: 125mm Workpiece load: 5000 Length: 6000mm Width: 1900mm Height: 1800mm Weight: 6700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2000, 2 x Mikron VCP 800 milling machines, manufactured in 1999 and 2000. Kjdjzu Ivaspfx Aiiodr

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 800 mm, Travel (Axes) X Axis (mm): 850 Y Axis (mm): 500 Z Axis (mm): 550 Table Table dimensions (mm): 850 x 500 Max load capacity (kg): 350 Pallet change time (seconds): 12 Spindle Spindle speed (rpm): 12,000 Spindle taper: No. 40 Feed Rates Rapid traverse X/Y/Z (m/min): 36/36/36 Cutting feed rate (mm/min): 1–20,000 Tool Change System Tool holder: BT-40 Pull stud: 90° Tool magazine capacity: 32 positions Max. tool diameter with adjacent tools (mm): 75 Max. tool diameter without adjacent tools (mm): 150 Max. tool length (mm): 200 Max. tool weight (kg): 7 Tool-to-tool change time (sec): 1.5 Power Spindle motor power (kW): 11/15 Dimensions Installation footprint (mm): 3500 x 2300 x 2500 Net machine weight (kg): 6,700 MT 800P CONFIGURATION - CE conformity declaration - Fanuc 0iMD - Main transformer 380-200V/50Hz - 11/15 kW spindle motor Kedpfsy Ayk Ujx Aiiodr - Spindle speed 10,000 rpm, DIRECT DRIVE - High-pressure coolant system, 20 Bar - Spindle chiller - Upgraded roller guideways - BT 40 - 32-position tool magazine - Pneumatic chip cleaning system - Maintenance tool kit - Programming and maintenance manuals in Italian - Integrated work light - Chip conveyor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 55 mm Shot weight: 434 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 474 cm3 Platen dimensions : 795 x 795 mm Working hours: 25.969 h Kodex Ir Ngopfx Aiiodr Type: Horizontal Drive: Hydraulic Equipment: 1x core puller Euromap 67

Condition: excellent (used), Year of construction: 2020, clamping force: 2,000 kN, Equipment: documentation/manual, Clamping force: 200 t Screw diameter: 50 mm Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Type: Horizontal Drive: Electric Hours: 34535 Kdedjyfh Uljpfx Aiior Available 3 units (2020-2019)

Condition: excellent (used), Year of construction: 2014, Clamping force: 200 t Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Kjdpfeyktgqex Aiiodr Injection pressure: 2000 bar Euromap 67 1x core puller Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 2001, Demag ergotech concept 800/420-310 (2001) Kdjdpoyyzqwsfx Aiior

Condition: good (used), Year of construction: 2003, Demag ergotech extra 800-430 (2003) Kdodpfxeyyzi Hs Aiijr

Condition: excellent (used), Year of construction: 2009, Clamping force: 320 t Clamping force: 3200 kN Opening force: 130 kN Opening force (boosted): 100 / 800 kN Opening stroke: 700 mm Mould height: 300–700 mm Distance between platens: 1000–1400 mm Platen size: 1040 × 1040 mm Max mould weight (per half): 3600 kg Ejector force: 100 kN Ejector stroke: 250 mm Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 392 cm3 Pump drive power: 45 / 55 / 55 kW Dry cycle time: 3.5–504 s Total installed power: 70.5 / 89 / 96 kW Kdedpfxsyya Ino Aiier Working hours: 53.212 h Type: Horizontal Drive: Hydraulic