Used Double Decoiler for sale (11,165)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Kjdpfxsxnlgcs Ab Toln Storage location: Garbsen

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine. No. Year of construction 2005 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support - new deburring brush Space requirement L x W x H 550 x 450 x 440 mm Kedpfx Aehrkrwjb Toln Weight 65 kg good condition

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Kodjhrkrpspfx Ab Teln Weight 45 kg good condition

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Kodpfov Srfwex Ab Teln Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: used, mileage: 1,109,410 km, power: 370 kW (503.06 HP), first registration: 02/2009, fuel type: diesel, number of seats: 81, gearing type: automatic, emission class: euro5, color: grey, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++Top Condition+++ +++Panoramic Roof+++ General Engine: Mercedes-Benz AdBlue Emission Standard: EURO5 Total Seats: 81 Seating: 79+1+1 sleeper seats with lap belts Transmission: Automatic Safety * Retarder * Cruise Control * ABS, ESP, EBS * Fog lights * Xenon headlights * Rear-view camera Passenger Area * Auxiliary heating * Air conditioning * Tables * Curtains * Luggage racks * Luggage nets * Individual air vents * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Microwave * Coffee machine * Central toilet Klsdpfx Abjykgh Ue Ton * Leather headrest inserts * Tour guide microphone * Driver microphone * Wheelchair space Audio, Communication, Electronics * Navigation system * Radio, CD * Video, DVD * Multimedia system * Power inverter Exterior * Trailer coupling * Matrix/destination display system Gorba * Double-width door – number: 1 * Lifting/lowering system * Power steering * Digital tachograph card * Sun visor * Sleeper cabin pre-installed * Electrically adjustable exterior mirrors * Driver’s door * Ski box lashing eyes * Central locking * Roof hatches * Roof fans * Roof ventilator * Panoramic roof Other * German registration certificate * Twin tires * Vehicle length: 13.89 m * Vehicle width: 2.55 m * Vehicle height: 4.00 m * Wheel covers * Tires: FA approx. 80% * Tires: MA approx. 40% * Tires: RA approx. 40% Our internal vehicle number: 12155 Errors excepted. Pictures and text may differ from the actual vehicle. Always over 300 vehicles in stock.

Condition: excellent (used), functionality: fully functional, Double miter saw OMS INVINCIBLE OK 330 Maximum cutting length: 3000 mm Maximum cutting width: 140 mm Units adjustable at 45°/-45° Motor power: 2×3HP ~2.2kW Kledsylm Nuepfx Ab Tsn Saw blades: 330 mm Pneumatic vertical material clamp

Condition: ready for operation (used), Year of construction: 2010, x-travel 10000 mm y-travel 1500 mm z-travel 1000 mm passage 1300 mm passage width 1500 mm Kodpfxjx S Rx Ij Ab Tjln control Siemens Sinumerik 840 D turning speeds 2 Stufen: 6000 U/min Number of working hours 54821 h tool taper SK 50 Boring power 120 mm thread capacity M 55 toolpiece magazine: chain magazine 30 Stück rapid traverse X-axis 36000 m/min rapid motion Y-axis 30000 m/min rapid traverse Z-axis 30000 m/min total power requirement 36 kW dimensions of the machine ca. 12 x 11 m Gantry-style milling machine with movable portal bridge and stationary clamping table. Features: • Clamping table designed with transverse clamping beams spaced 750 mm ndard panel panels are not included. Panel panels must be purchased separately if required. • Hydraulic clamping device with clamping bridges for axis machining, includinghydraulic system • Angle drilling and milling head, n = 4000 rpm SK50 • High accuracy and stability thanks to Hirth gearing • Automatic tool change in the angle head • RWP20.50-M touch probe • Pendulum operation • Safety fence with light curtains, Sick brand • Clamping table with 750 mm transverse clamping beams • 30-position tool chain magazine on the gantry frame • Machine cooling system • Integrated water-to-air heat exchanger in the control cabinet • Unisign remote diagnostics for Siemens Sinumerik 840 D • Makrolon curtains on both sides of the gantry bridge motorized height adjustment • Partition wall with viewing window • Chip conveyor with hinged belt design • Mounting and alignment elements • Documentation Accessories: 1 spare SK50 angle drill and milling head 1 spare Hexagon RWP 20.50-M touch probe 1 2500 x 1200 mm T-slot clamping frame, which can be installed on the machineinstead of the hydraulic device. Various spare parts

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, cutting height (max.): 160 mm, cutting width (max.): 700 mm, height adjustment type: mechanical, total length: 17,000 mm, total width: 2,500 mm, total height: 1,000 mm, saw drive: 31,000 W, Double-edge circular saw with conveyor rollers from Paul Type: PKAH Year of manufacture: 1989 5-meter driven conveyor rollers Klsdpswa T Dcefx Ab Ten 2 x 5-meter non-driven conveyor rollers With side-mounted board removal belt Total L x W x H: 17 x 2.5 x 1 meter Boards up to 70 cm wide and 16 cm thick can be edged. Width electrically adjustable. Height mechanically adjustable. 400 V Max. 63 A 31 kW Please contact us if you are interested or have any questions.

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - afwikkeltoren met 4 afwikkelaars (AG 3000 a) Capaciteit per afroller: 3 ton armlengte: 1350 mm Kjdpfjxqh Sasx Ab Tjln maximale snelheid: 25 m/min, frequentiegestuurd 2 - bobine-selector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min, frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min, frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min, frequentiegestuurd 5 - Schechtl-schaar voor het op lengte snijden met Siemens Touch CNC-besturing 1250 x 2 mm

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades Kljdpoyi T H Isfx Ab Ten - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Year of construction: 1989, condition: used, functionality: fully functional, Model Gemini ESCO D6-SR with decoiler Year of manufacture: 1989 Max. material diameter: approx. 9 mm Max. processing length per stroke: approx. 62 mm Number of rotating tools: 3 (or turret version with 4 positions) Max. tool head speed: up to approx. 7,100 rpm Machine dimensions (machine bed only): approx. 1,000 × 3,400 mm Operating voltage: 380V 50 Hz Control voltage: 110 V 50Hz Klodpfx Aoyip E Tsb Ton Rated power: 3.4 kW Rated current: 6 A

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Blade diameter 550 mm Electronic head tilting Kljdoxvhiijpfx Ab Tjn Internal/external tilting from 22°30′ to 135° Labeling machine

Condition: excellent (used), functionality: fully functional, Usable cutting length: 4000 mm Blade diameter: 500 mm Electronic tilting of the heads Kodpfx Ajx Ifimob Tjln Internal/external tilting from 22°30′ to 135° Feeler probe Chip conveyor belt

Condition: excellent (used), functionality: fully functional, Blade diameter: 350 mm Maximum cutting capacity: 4000 mm Pneumatic tilting of the heads Number of speeds: 2 Maximum blade speed: 2820 rpm Motor power: 4.8 kW Machine dimensions: 5600 x 1800 x 2000 mm Kjdpfjxzfa Nox Ab Tsln Machine weight: 1400 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Max rotational speed 24,000 rpm Aggregate heads Kodpsuqw E Nefx Ab Teln 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Year of construction: 2011, condition: like new (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Pneumatic tilting of heads External tilt 45° Ksdpfex A Ar Ssx Ab Tsln Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Usable cutting length 5000 mm Blade diameter 550 mm Electronic head tilting Internal/external inclination from 22°30′ to 135 ° Measuring probe Klodpfeyg Epvsx Ab Ton

Condition: excellent (used), functionality: fully functional, Double-sided edge sanding line consisting of two machines with 6 sanding units each. Kodpfx Absuyizce Tjln

Condition: excellent (used), functionality: fully functional, Electronic X-axis control X-axis positioning speed (m/min): 25 Kjdpfx Aboxqx S Re Teln Pneumatic tilting of heads External tilt 45° Mechanical adjustment of intermediate angles Hydropneumatic blade feed Usable cutting length (mm): 4,000 Minimum standard cut at 2 heads at 90° (mm): 310 Blade diameter (mm): 450

Condition: used, -Dimensions (LxWxH): 2150x1970x2730 mm Klsdpfx Asyly Iqsb Tsn -Model: LR-812-H -2 trolleys: 800x600 -360 baguettes -Baking surface: 19.2 m² -Refractory stone system -Power: 5 kW -Voltage: 400V -Rotary rack convection oven with integrated heat recovery and internal heat release through refractory stone sidewalls 1-Exhaust duct 2-Convection turbine 3-Burner 4-Rotary mechanism 5-High-performance steam generator 6-Extraction wall 7-Suspended rotary trolley/trolleys 8-Insulation 9-Rotating tray

Condition: excellent (used), I am selling an industrial table grinder. Price 550€/ for 1 piece. Klodpfx Aeud A A Seb Tjn

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Kodpfx Aexzu Rqjb Toln Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: good (used), I am selling a Rema DS 12/ST in good condition. Ksdpfx Abeu Uvv Te Teln

Condition: used, band length ca. 1.700 mm + 2.700 mm Kjdpfx Abjv Hgb Ns Tjln cutting width max. 2.500 mm Cutting height max. ca. 80 mm

Condition: used, functionality: fully functional, operating hours: 962 h, load capacity: 1,400 kg, lifting height: 2,500 mm, fuel type: electric, mast type: simplex, construction height: 1,700 mm, fork length: 1,190 mm, drive type: Elektro, Double-deck stacker Mast type: Standard Transmission: Automatic Ksdpfx Abjxy Au Ij Tsln Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Polyurethane Front tyre condition: 80 - 100% Rear tyre type: Polyurethane Rear tyre condition: 80 - 100% Battery voltage: 24V Battery year: 2020 Battery condition: 60 - 80% Description: Price includes new safety inspection (UVV), very good paintwork, battery regenerated with a Power Cycler including Kappa Test 71%, suitable charger with plug, integrated scale, electric steering. We are happy to organise low-cost transport for you. Lease-to-own available! CE certificate, scale, electric steering.