Used Drawing Board for sale (5,186)

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm Fsdpfxsvuk I Nj Affoga ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz a sister machine can be offered in as is where is condition, partially disassembled

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 1660 mm stroke 400 mm Distance table/ram, stroke up 600 mm Table surface area 1600 x 1000 mm table height over floor 960 mm Die cushion pressure in table 80 t Die cushion stroke in table 200 mm Die cushion area in table 950 x 650 mm Side window 720 mm Ram surface 1600 x 1000 mm Oil volume 1400 l Power capacity 57,0 kW Weight 30,0 t Dimensions (WxDxH) 3,0 x 2,9 x 4,4 m permitted for manual loading according to the German Safety Regulations (UVV) Fgsdpovuuhmjfx Affea with oil-hydraulic drive, hydraulic drawing cushion in table can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1982, pressure 350 t distance between columns 1350 mm stroke 900 mm distance table/ram, max. stroke up, adjustment up 1300 mm table surface area 1300 x 1000 mm pressure of drawing cushion in table 100 t stroke of drawing cushion in table 380 mm die cushion area 350 x 285 mm capacity of ejector in ram 25 t ejector stroke in ram 200 mm table height over floor 750 mm ram surface 1300 x 1000 mm speed down 500 mm/s speed up 160 - 470 mm/s working speed 16 - 44 mm/s drawing speed 57 - 160 mm/s return capacity 32 t oil volume 1700 l power requirement 91,0 kW Dimensions (WxDxH) 3,75 x 2,8 x 7,2 m Fgjdpfx Ajvuk Iijffsa height over floor 5,28 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (Sick), controllable dependant on pressure/time and way, hydraulic drawing cushion in table (controllabe), hydraulic ejector in ram, ram interlocking in TDC, speeds controllable, two-hand operation stored in partly dismantled condition - can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1993, pressure 315 t distance between columns 2060 mm stroke 700 mm Distance table/ram, stroke up 1100 mm Table surface area 2000 x 1000 mm Die cushion pressure in table 125 t Die cushion stroke in table 200 mm die cushion area 1200 x 600 mm Table height above floor 750 mm table height over floor (if standing without pit) 1100 mm Side window 720 mm Ram surface 2000 x 1000 mm Oil volume 1800 l Power capacity 90,0 kW Weight 35,0 t Dimensions (WxDxH) 3,6 x 2,75 x 5,65 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, cutting impact cushioning (with motoric depth adjustment) No foundation pit necessary Fsdpfx Asvuudzoffega can be offered without putting into operation (without operator’s console / screen) or alternatively with new control Siemens S 7-1500 F, with new operator’s console / screen and new user interface

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Fgodpjy Aafrofx Affoa

Condition: new, pressing force: 200 t, DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was already built and delivered to a customer's order. We can manufacture a new machine of this model for you at short notice – including individual options tailored to your requirements. This is a hydraulic deep drawing press with integrated drawing cushion function designed for forming processes, drawing operations, and precise sheet metal processing. Base price: €76,000 net Options (upon request): The options listed are based on completed customer projects and allow targeted adaptation of the machine to your specific application. The basic version offers a functional standard configuration – in practice, it is usually enhanced with additional features and specifically configured to project requirements. Fjdpeyzf A Hjfx Affjga * T-slots and holes to customer specification * Adaptation of stroke, installation height, and press force range * Extended drawing cushion configuration * Customized control modifications * Enhanced safety and monitoring systems ==== Technical Data + Information: ==== General Information * Design: Double column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram area: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Mode selector switch (key switch) * Modes: setup, manual cycle * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches * Hydraulic interlock * Control cabinet IP54 with brand components (SIEMENS, ALLEN BRADLEY, SICK) * Two-layer coating according to RAL colors ===== Deep drawing, sheet metal forming, forming technology, manufacture of drawn parts, series production, metalworking Deep drawing press, hydraulic press, double column press, drawing cushion press, forming press, sheet metal processing press Are you looking for a hydraulic press tailored to your application? Contact us for an individualized quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Condition: excellent (used), Weinig Unistacker Paternoster stacker with additional handling equipment Offer includes 1. Weinig 820 right angle transfer conveyor. Fgedpfx Afsxbpgasfsa 2. Weinig (5 belt) sorting station feeding to paternoster stacker. 3. Weinig 811 Unistack Paternoster stacker with 3x stick magazines. Minimum length approximately 500mm. Maximum length 3100mm. Pack width 1200mm Pack height 1200mm Max. capacity 5 layers per minute 4. Weinig 802 scissors lift roller conveyor feeding to pack outfeed. 5. Weinig 812 powered roller conveyor outfeed. 6. Weinig chain pack outfeed conveyor

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Fgedoycin Uepfx Affja

Year of construction: 2014, condition: not inspected (used), Distribuition Board CTP_PWR2_400 Magnus Interlook Board Drum Driver Module Fodpohcz Hxsfx Affoga Output Rollers

Year of construction: 1995, condition: excellent (used), Very well maintained pre-cutting circular saw for side goods. With hydraulic power unit and accumulator, double clamping hydr. Attachment kit with measuring roller for riving knife. Electric control cabinet with control. Control panel with digital dimension input and operation. Fgjdpfx Ash Eyqvoffoa Photos show original condition.

Condition: new, power: 189 kW (256.97 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: navigation system, parking heater, FA XB 260 12t Swing-Board Body color: Traffic white Cab suspension: mechanically reinforced Extended Day Cab Central locking Exterior sun visor, green, translucent Fog lights and cornering/turning lights Halogen headlights Daytime running lights Green tinted windows Side and rear windows not glazed 5 mirrors Electrically adjustable mirrors Front view mirror Mirror brackets for bodies 2.50 - 2.60 m Headlight beam for right-hand traffic Reversing camera Headlight trims and bumper: cab color Cab steps and wheel arches in cab color Chassis color: anthracite grey Pneumatic steering column lock Manually operated roof hatch Driver's seat: air-suspended luxury driver's seat Parking heater Air Top 2000 Driver seat armrest ECAS remote control Converter 24V to 12V, 15A, 180W Left-hand drive Fodpfxjyy Evws Affjga Soft-touch steering wheel, color black Seat belts black Passenger seat: fixed, velour Engine tunnel storage compartment Air conditioning Electric windows Digital tachograph, VDO version G2V2A Speed limiter setting: 90 km/h FMS interface (pre-installed) Adaptive cruise control with FCW and AEBS-3 Toll preparation PACCAR Connect Antenna: AM/FM + GSM + GPS FM/DAB/DAB+ radio with speakers incl. telephone connection Driver Performance Assistant Manual master switch Lane change warning system Electronic stability control (VSC) Reverse warning Basic immobilizer Hill start assist DAF Side and Turn Assist Alcohol ignition interlock (pre-installed) Speed limit recognition DAF Drowsiness and Distraction Detection Compliant with UN regulations R155 and R156 Rear axle: 8.50 t, air suspension, SR8.14 Front axle: 4.50 t, parabolic, 45N Front axle 1: 4,480 kg, load index 136 Rear axle 1: 8,480 kg, load index 134 Silver-grey wheel trim rings Goodyear Tire pressure monitoring system Front axle(s): 245/70R17.5 Driven rear axle(s): 245/70R17.5 Steel disc wheels, silver-grey F1, 245/70R17.5 GO R1, 245/70R17.5 GO Rear axle ratio 3.73 Mechanical differential lock 8-speed PowerLine 8AP1000 overdrive transmission, 4.89-0.64 PX-7 engine, 189 kW/257 HP. Cab badge: 260 Emission standard Euro 6 Traction control (ASR) Standard transport, full version Idle shutdown, 5 minutes Automatic PowerLine 8-speed transmission Parking brake actuation with test position Exhaust brake Wheelbase 4.65 m / rear overhang 2.75 m Plastic fuel tank, 155 l Front underrun protection Splash guards AdBlue® tank 30 l, right chassis side Fuel tank left AdBlue® tank cap without lock Rear lights with bulbs EAS unit right, outlet right to the rear Operation with drawbar, identification plate, up to max. GCW Pneumatic connection for trailer, turntable coupling Cross member D85-Dc70-V25, coupling D85 A, fitted Electrical connection for trailer + EBS, 24V/2x7-pin Body mounting BAM 1, loose brackets ECAS control Body functions Body connector on chassis Side marker lights Tail lift application Fixed control r., no 1. r. Generator 100 A, batteries 2 x 175 Ah Max. gross combination weight powered axle load 20,000 kg Technically permissible gross chassis weight max 11,990 kg Air intake on top, behind the cab Heated water separator Warranty Plus Powertrain - 3 years/200,000 km Standard fuel quantity Body: ZIKUN Swing-Board I-Body Technical data: Through-loading length: 6,150 mm Loading length: 6,300 mm Through-loading width Rear portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 diameter range: max 18 mm feeding speed: max 15 m/m capstan diameter: 900 mm output: 20 HP Location: In our warehouse Fgjdpfxswxdkqo Affsa

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system Fjdpfx Afsyupulefsga - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 1980, pressure 250 t distance between columns 2000 mm stroke 600 mm Distance table/ram, stroke up 1000 mm table surface area 1700 x 1300 mm table height over floor 800 mm die cushion pressure in table 100 t die cushion stroke in table 180 mm Die cushion area in table 1650 x 700 mm side window 1000 mm ram surface 1700 x 1400 mm weight 31,1 t dimensions (WxDxH) 3,3 x 1,9 x 4,85 m Height above floor 4,55 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic cutting impact No foundation pit necessary Fedpfx Afjvut Tnefjga can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1996, pressure 160 t distance between columns 1380 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 500 mm table surface area 1250 x 850 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 150 mm die cushion area 450 x 450 mm table height over floor 900 mm side window 250 x 400 mm ram surface 1350 x 850 mm speed down 400 mm/s speed up 350 mm/s working speed 50 mm/s oil volume 1850 l power requirement 58,0 + 11,0 kW weight 24,1 t dimensions (WxDxH) 2,85 x 2,15 x 4,6 m Fjdevut Ilspfx Affoga permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure and way, hydraulic drawing cushion / ejector in table, cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1996, pressure 100 t distance between columns 1525 mm stroke 450 mm distance table/ram, max. stroke up, adjustment up 850 mm table surface area 1500 x 1150 mm pressure of drawing cushion in table 30 t Fjdpfxovuufxo Affega stroke of drawing cushion in table 150 mm table height over floor 940 mm side window 480 mm ram surface 1500 x 1150 mm oil volume 1200 l weight 25,0 t dimensions (WxDxH) 4,2 x 1,75 x 5,1 m light guard Sick permitted for manual put-in according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion / ejector in table, hydraulic ejector in ram, hydraulic cutting impact cushioning, mechanical depth stop No foundation pit necessary 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Fodpjyxxy Hefx Affsga

Condition: new, power: 330 kW (448.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * Emissions Standard Euro 6 * Automated Transmission, TraXon, 12 gears * Standard Component Arrangement * Fuel Tank on Left * DAF Connect * Warranty Plus Driveline - 3 years - 300,000 km Options * Exterior Sun Visor Fedpfx Afotv T Avsfega * LED Headlights, Cornering and Fog Lamps * Central Locking, 3 Keys, 2 Remote Controls * Lower Step Cabin in Crystal White * Steering Wheel with Silver Accents * Door Trim: Loose Weave Fabric * Driver's Seat: Luxury Air * Armrests on Both Sides of the Driver's Seat * Passenger Seat: Cinema & Table, Fabric Cover * Dashboard Table * Cool Box or Refrigerator * Automatic Climate Control for Cabin * Parking Heater with Waste Heat Pump and Timer * Roof Hatch with Electric Operation * Accessory Power Supply: Standard + 2x 40 A * ECAS Remote with Extended Functions * Toll Preparation * Digital Tachograph, VDO 1C, Version G2V2 * Speed Limiter Setting: 90 km/h * DAF Infotainment Luxury Plus, Luxury Speakers * Antennas: DAB-Prep. Radio, 2x Mobile, GNSS Extra: CB * Wireless Charger * Reversing Warning System * Front: 8.00 t, Air Suspension, 161 N * Front Air Suspension: Medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * MX-11 Engine, 330 kW/449 HP, Cab Emblem: 450 * 12-Speed TraXon Transmission 12TX2210 DD, 16.69-1.00 * Rear Axle Ratio 2.47 * Mechanical Differential Lock * MX Engine Brake * Parking Brake Assistant * Wheelbase 4.60 m / Rear Overhang 2.55 m * Longitudinal Members 260/7.0 mm, Continuous Inner Reinforcement * 545-l Aluminum Fuel Tank Left, Height 620 mm * Use with Drawbar, Type Plate, up to Max Gross Vehicle Weight * Crossmember D137 + Rockinger Coupling D130 * Pneumatic Coupling for Trailer, Swivel Coupling * Electrical Connection for Trailer, 24 V/15-pin * Hard-wired Body Signals and Warnings * Side Marker Lights * Body Mounting Method BAM 1, Console Type B * Tail Lift Application * Hard-wired Steering Right, No First Right * Alternator 130 A, Batteries 2 x 210 Ah AGM * Battery Energy Monitoring Day Registration 03.12.2025 Payload: 14,390 kg Body: ZIKUN Swing-Board I Body Technical Data: Through-loading length: 7,250 mm Loading length: 7,400 mm Through-loading width: 2,480 mm Rear portal: Loading width inside: 2,480 mm External width: 2,550 mm Through-loading height inside: 2,150 mm Entry height: approx. 1,199 mm Overall height: approx. 3,549 mm Underframe: Stable lightweight construction ZIKUN Flap Swivel Mechanism Fixed Roof Powder-coated in RAL 9010 Pure White Collision protection: Welded steel buffer strips on both sides for impact protection. -- PVC mudguards on rear axle -- Holder for wheel chock + 2 chocks -- Red position lights above tail lift -- Side contour markings in white, rear in red The entire body is sandblasted, primed, and painted or powder coated in one color. Underframe and Superstructure: DAF E1980 WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring telescopic rods (CRS System Ancra-Jungfalk, Dekra certified to VDI 2700 Code XL). Sliding access step Pallet protection edge left and right. Interior lighting as LED spotlights mounted at the top rear, connected to cab switch. Additional interior lighting as LED spotlights mounted at the rear. Front wall/bumper plate made of aluminum-

Condition: excellent (used), functionality: fully functional, Drawing cabinet / map cabinet, six drawers, 1,350 x 930 x 980 Fgsdpfx Afoyxnrxjfea

Condition: new, Sheet metal cutting moulds Fodpfxsfuango Affoga Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Fgjdpfx Afsn Awd Rjfoa Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Fgjdeywpcpopfx Affsa Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Year of construction: 1968, condition: used, Renz DPS spiral drawing-in machine Fodpfx Afjbq A D Rofjga Machine number: 50223

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Fgodjym D E Aepfx Affoa Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. Fedoyubh Rspfx Affsga They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition.