Used Drill Head for sale (13,569)

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Number: max. 5x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 195/75/H90 mm -Weight: 3 kg Cjdpfx Asb A R Hisk Ajri

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks Codpfortrx Rex Ak Aeri (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox Cjdpob A R Rdefx Ak Ajri -Number: max. 4x drill bits -Recording: M8 -right/left: rotating alternately -Drill bit spacing: 32 mm -Dimensions: 145/60/H100 mm -Weight: 4 kg

Condition: used, Year of construction: 1985, Used Machine Cjdezk N Dwspfx Ak Ajri Year of Manufacture: 1985 Features and Technical Specifications: - For horizontal and vertical structural drilling - For vertical row drilling in a 32 mm grid - Vertical drilling unit with dual-spindle drill heads, freely positionable on an indexing shaft - 1.5 kW motor with 1,400 rpm - 1.5 kW motor with 2,800 rpm - Drill heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits - Machine needs to be inspected/serviced. Basic functions are intact Availability: available shortly Location: 63934 Röllbach

Condition: good (used), Multi-spindle head, multi-spindle drill head, dowel drill head, hardware drill head -Dimensions: 190/85/75 mm -Drilling distance: 26 mm -Medium drill bit: offset by 5 mm -Number: 1x drill heads available Price: per piece Crodpfob A I Ulsx Ak Aoi -Weight: 2 kg/piece

Condition: good (used), Multi-spindle head, drill beam, multi-spindle drill head, articulated multi-spindle head, row drilling machine, dowel drill head, dowel drilling machine, drilling gearbox -Quantity: max. 1x drill bit Crjdjb A R Rlepfx Ak Aoi -Recording: M8 -Dimensions: 80/80/H150 mm -Weight: 0.8 kg

Condition: used, Year of construction: 1997, Mollart Machine Tools 3 Axis, Knee Type Omnisprint Gun Drilling Machine with GE Fanuc Series 18 - M CNC Control, Twin Spindle Z Axis, Max Gun Drill size 22mm x 1000mm, FSE Swarf Management System with 1250l Oil Tank, Paper Roll Clarifier Filter and Swarf Conveyor, Fanuc Drill Spindle Motor. S/No. A270 - 0397 (1997). Country of Origin: United Kingdom Cedpj Afwlqofx Ak Asri Please Note: This Lot is located in Birmingham, UK.

Condition: new, power: 349 kW (474.51 HP), first registration: 10/2023, fuel type: diesel, tire size: 13R22.5, axle configuration: 6x4, wheelbase: 3,500 mm, fuel: diesel, fuel tank capacity: 390 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, total length: 7,170 mm, total width: 2,500 mm, total height: 3,140 mm, Equipment: air conditioning, = Additional Options and Accessories = - Leaf spring suspension - Sun visor = Further Information = Transmission: TX-16M, automatic Year of manufacture: 2023 Tire size: 13R22.5 Brakes: Drum brakes Crjdpfx Akozru E Nj Aji Suspension: Leaf spring suspension Front axle: Steerable Number of cylinders: 6 Engine displacement: 12,882 cc Unladen weight: 9,655 kg

Condition: good (used), functionality: fully functional, Alzmetall Alzstar 40/S Vario Pillar Drilling Machine Technical data: Manufacturer: Alzmetall Type: Alzstar 40/S Vario Machine: Pillar drilling machine Csdpfxs Aggh Ee Ak Aori Drilling capacity in steel E335 (St 60): 40 mm Thread cutting capacity in steel E335 (St 60): M24 Spindle mount: MK3 (Morse taper 3) Distance from spindle to column: 293 mm Table dimensions: 515 × 360 mm Distance from spindle to table: 117–701 mm Column diameter: 115 mm Spindle stroke: 120 mm Motor power: 1.45 / 1.9 kW Spindle speed: 160–2,250 rpm Motor speed: 1,500 / 3,000 rpm

Condition: used, Johansson Type: Johansson Cordimatic 7000 Coordinate Measuring Machine The coordinate measuring machine for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control, rotary/swivel probe & probe changer library) Crsdpfx Aozd N Shsk Aoi Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 controller Condition: used Scope of delivery: (See image) (Changes and errors in technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Year of manufacture: 2015 Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cjdpfx Akezavvgj Ajri Yorick Diebels

Condition: good (used), Further information available upon request. Cincinnati drill presses, various models. Csdpjz Ih Iyjfx Ak Ajri

Condition: used, Year of construction: 1989, Technical details: bore capacity in steel (diameter): 28 mm throat: 285 mm bore stroke: 165 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 3 spindle speed:: 65 - 1.750 / 4x steples U/min feed: 0,1; 0,2; 0,3 manuell/automatisch mm/U Distance spindle/table max.: 80 - 680 mm table clamping surface:: 500 x 370 mm table rotating: 360 ° drill table adjustment: 600 vertical mm column diameter: Ø 130 mm total power requirement: 7,5 kW weight of the machine ca.: 273 kg dimension machine xH: 0,9 x 0,6 x 1,9 m The machine can cut threads, change of direction left/right selectable via foot switch and/or depth stop Crsdeu Idkzjpfx Ak Aei Table can be swiveled and adjusted in height. *

Condition: used, Technical details: number of spindles: 4 bore capacity in steel (diameter): 2-16 mm bore stroke: 140 mm drill spindle - Morse Taper: MK 3 spindle throat: 280 mm spindle distance: 455 mm headstock adjustment: 250 via Hand - Kurbel mm feed:: 0,08 - 0,12 - 0,20 - 0,31 / 4 steps mm/U feed:: automatic + manuell spindle speed:: 180 - 2000 / 8 steps U/min distance between table/spindle: min. 3x 140mm und 1x 260mm mm distance between table/spindle: max. 3x 700mm und 1x 820mm mm table surface area: 1800 x 350 mm table adjustment: 300 via Hand mm total power requirement: 6,3 kW weight of the machine ca.: 2,4 t dimension machine xH: 2,1 x 0,9 x 2,2 m Application: Drilling, countersinking; reaming and thread cutting. Each drill spindle has its own drive motor Credsu Idugepfx Ak Aji Equipment: Foot pedal/operation Hand crank *

Condition: used, Year of construction: 1984, Technical details: Credju Ng Irspfx Ak Asi grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm Cjdpfxou Ng Ncs Ak Asri number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Technical details: bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 160 mm spindle taper MT: MK3 feed steps: 0,1; 0,2; 0,3 mm/U und manuell spindle speed:: max. 1800 stufenlos U/min Distance spindle/table max.: 750 mm table clamping surface:: L: 280 x B: 355 mm table rotating: nein ° clamping table - swivable: 360 Grad drill table adjustment: vertikal: 600 mm Crsdpsva Higefx Ak Asi column diameter: 130 mm threading: Nein / no total power requirement: 1,1 kW weight of the machine ca.: 570 kg dimension machine xH: 0,9 x 0,9 x 1,9 m This machine has 2 tables. Drilling table LxW: 370 x 500 mm Attachment table: LxW: 420 x 750 mm Clamping surface = 320 x 600 mm, transverse displacement (X-axis) 250 mm possible Ejection of tool via ejector wedge accessories: vice machine base *

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M Csdpfxevca Rcj Ak Asri No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 16 mm throat: 250 mm bore stroke: 125 mm spindle taper MT: MK 2 spindle speed:: 350 - 2000 / 8step U/min table clamping surface:: 280 x 355 mm table rotating: ja ° Crodpfx Aeu Idhmsk Aei drill table adjustment: 520 vertical mm distance table - lower edge spindle: max. 600 mm column diameter: 110 mm total power requirement: 1,1 kW weight of the machine ca.: 272 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: -Drill chuck 13 mm -twist drill 10 mm with 45° countersunk cut -machine vice *

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, power: 63 kW (85.66 HP), overall weight: 5,260 kg, drilling depth: 122,000 mm, TECHNICAL DETAILS Traction force: max. 89 kN (approx. 9.1 t) Thrust force: max. 75.6 kN (approx. 7.7 t) Torque: max. 2,980 Nm Spindle speed: max. 225 rpm Drilling depth: approx. 122 m (depending on ground conditions) Pilot hole diameter: min. approx. 102 mm Drill string length: approx. 3,050 mm Credpfx Ako Ahxyaj Aoi Drill string diameter: 52 mm Drill string connection diameter: 67 mm Drill string magazine capacity: approx. 122 m Drilling angle: 10–14° MACHINE DETAILS Engine: Cummins 4-cylinder turbo diesel Displacement: 3.3 l Engine power: 63 kW (approx. 85 hp) Flushing pump flow rate: max. 120 l/min Flushing pump pressure: max. 103 bar Fuel tank volume: 114 l Hydraulic oil tank volume: 72 l Dimensions & Weight Dimensions (L x W x H): approx. 5,260 x 1,310 x 2,390 mm Operating weight: approx. 5,260 kg EQUIPMENT Enclosed operator cabin with joystick control Hydraulic drill string changer with drill string magazine Hydraulic clamping and breaking device Integrated drilling flushing pump Hydraulic anchoring system Ditch Witch ESID warning system Electronic 750 display Rubber track undercarriage External cable control Drill string, partially stored separately Various drilling and reaming tools Drill string connections and adapters Accessory and tool box Operating manual JT2020 Mach 1 Spare parts manual JT2020 Spare parts manual FM13

Condition: good (used), Year of construction: 1980, machine/vehicle number: 2226-3, Offer 26331 Technical data: - Drilling capacity in full steel ST 60: 23 mm - Drilling capacity in GG 25: 30 mm - Thread cutting in ST 60: M 20 - Thread cutting in GG 25: M 26 - Drill spindle connection: MK 3 - Quill stroke: 135 mm - 12 drill spindle speeds: 70 - 1550 rpm - Drilling feed: 0.075 - 0.30 mm - Min./max. distance spindle – table: 220 / 670 mm - Drilling radius min./max.: 305 / 920 mm - Table size: 1060 x 600 mm - Drive: 400 V / 1.1 - 1.6 kW - Space requirement approx.: W 1200 x H 2500 x D 2300 mm - Weight approx.: 1380 kg - Includes: - Thread cutting device Crsdpfx Aj Agtagsk Asi - Hydraulic column and boom clamping - T-slot clamping plate, vertical, on the left side of the machine

Condition: excellent (used), Year of construction: 2003, Hettich Blue Max hinge drilling machine, type: Blue Max 19 - FS Number of spindles per row of holes: 11 Number of horizontal spindles: 5 Pot-joint drilling head: yes Cedpszhx D Uofx Ak Ajri Drill spacing: 32 mm Clamping device: yes / pneumatic Power consumption: 2.2 kW Stop rulers Accessories: many drill bits (see photos) Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 32 mm x-travel: 750 mm y-travel: 520 mm drill capacity in cast iron: 45 mm revolution per minute: 90 - 4500 U/min feed steps: 6 bore spindle stroke: 250 mm boring spindle diameter: 30 mm drill spindle - Morse Taper: MK4 vertical adjustment of the arm: 520 mm throat max.: 1000 mm throat min.: 250 mm column diameter: 400 mm swivel range of the arm: 180 ° table clamping surface LxW: 1150 x 800 mm total power requirement: 3,5 KW weight of the machine ca.: 2000 kg dimension machine approx.LxWxH: 1,7 x 1,07 x 2,61 m The KOVOSVIT VO 32 is a robust and versatile radial drilling machine designed for industrial applications. The machine is suitable for drilling, boring, countersinking, reaming, and tapping operations in steel, cast iron, and other materials. Thanks to its swiveling radial arm and large reach, even large and heavy workpieces can be machined conveniently without the need for complex repositioning. The machine features a massive cast-iron construction, a powerful main drive, and an automatic feed system. The drilling head can be moved along the radial arm, providing a large working area. Its solid design ensures high precision, reliability, and a long service life, even under continuous operation. Cjdpjzgwgfjfx Ak Aeri Equipment: ·Including coolant pump ·1 × boring tool block (boring cube) ·1 × machine vise *

Condition: reconditioned (used), functionality: fully functional, The used BERGONZI TR 40 radial drill is a robust drill press, complete with hydraulic clamps and a worktable, with a maximum drilling capacity of 40 mm in steel and an arm length of 1250 mm; it comes complete with a worktable, a new coolant system, and all necessary regulatory adjustments. Cjdpfx Akj Ad N Exo Asri

Condition: used, Paper drilling machine, Hang 106 DTK4, 4-spindle drilling machine, with various drill bits, 2 different speeds. In good condition. Crjdpfxjzwdg Te Ak Aei If you are interested, we would also be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our facility, by prior appointment.