Used Drilling Tailstock for sale (6,154)

Condition: used, Tailstock for lathe, counter bearing for dividing head, dividing head -from: Schaublin 102 -Collet holder: type W25 Hodpfx Aed Riw Hsgzeg -Drawing: with the photos -Dimensions: 450/360/H170 mm -Weight: 11kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 7694, table width: 250 mm, table length: 300 mm, overall weight: 200 kg, spindle speed (max.): 1,420 rpm, No reserve price – guaranteed sale to the highest bidder! Hodpfxoxqntko Agzjg The machine is being auctioned due to a business liquidation. Placing a bid obliges the buyer to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: 160 to 1,420 rpm Table dimensions: 300 x 250 mm Number of T-slots: 2 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 700 x 450 x 1,900 mm Weight: 200 kg

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Hsdpfx Aox Hfugegzsg Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Electrical schematics Operating manuals

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Hodpfewuz Dgjx Agzog

Condition: good (used), Year of construction: 2013, total length: 3,990 mm, total height: 2,500 mm, total width: 2,280 mm, overall weight: 8,500 kg, INGERSOLL CM SYSTEMS AOHD AGILE OIL HOLE DRILL Equipped with: Siemens 840D Control (2) Drill Heads 20-Tool Rack HSK 50A Taper (2) 7" 3-Jaw Chucks (2) Tailstocks (2) Steady Rests Chip Auger Chip Conveyor Mist Collector Hydraulic System Q R 2 Lube System Air Compressor Specifications: Maximum Length: 1050 mm (41.3") Minimum Length: 180.0 mm (7.1") Maximum Stroke: 250.00 mm Maximum Main Journal Diameter: 115.0 mm (4.5") Maximum Pin Journal Diameter: 100.00 mm (3.9") Maximum Swing Diameter: 250.0 mm (9.84") X-Axis Travel: 1450 mm (57.1") Y-Axis Travel: 150 mm (5.9")W/HSK 50 Z-Axis Travel: 305.0 mm (12.0") A-Axis Travel: 360 Degree B-Axis Travel: 90 Degree Feed Rate (Z): 1 m/min Maxim (40"/min max) Position Accuracy of X,Y,Z Axes: .010 mm (.00039") Position Accuracy of A & B Axes: .03 Degree Position Repeatability of X,Y,Z Axes: .005 mm (.0002") Position Repeatability of A & B Axes: .005 Degree Spindle Power: 5.5 kW (7.5 hp) Spindle Speed: 0-6,900 RPM Hodpfx Aertrx Rjgzjg Tool Adaption: HSK 50E or A Tool Storage (ATC): 20 Total - 10 Per Spindle W/HSK 50 Lubrication - Slides & Ball Screws: Automatic Central Lubricator Approximate Floor Space (LxWxH): 4.0 x 2.3 x 2.5 m (13.1 x 7.5 x 8.2 Ft) Approximate Machine Weight: 8,500 kg (18,740 #)

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: BCOR12150, BIESSE BREMA EKO 902 CNC and vertical dowel insertion machine for reduced cycle times Equipment Features - Clamping grippers measure the thickness to adjust drilling depth - Laser-based measuring system for detecting the front and rear panel edges - Length tolerance compensation correcting the workpiece length in X - 5-position tool changer - Drilling head with individually retractable spindles and grooving saw - Diameter: 120 mm - Gluing and dowel insertion units mounted on Y and Z axes Options - 4.5 kW electrospindle; 18,000 rpm - Special drilling unit for hinges Hsdpfx Aow Nytnjgzeg Technical Data - Panel length: 160 - 3200 mm - Panel width: 35 - 900 mm - Panel thickness: 8 - 80 mm - X/Y/Z axis speed: 100 / 60 / 30 m/min - X axis travel: 3200 mm - Y axis travel: 900 mm - Main spindle power: 4.5 kW - Number of controlled axes: 3 axes - Number of drilling spindles: 20 - Number of tool positions: 5

Condition: used, machine/vehicle number: 0719, Mounting cone: MK 6 Core tip angle: 60 ° Hjdpodhwzfefx Agzjg Load: 3000 daN max.workpiece weight: 5000 daN Weight: 16 kg

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10100, table width: 300 mm, table length: 400 mm, spindle speed (max.): 1,400 rpm, drilling depth: 150 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. Placing a bid obliges timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: from 200 to 1,400 rpm Drilling depth: up to 150 mm Table dimensions: 400 x 300 mm Slots: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 300 kg Hjdpfxjxqdw Es Agzjg

Year of construction: 1994, condition: good (used), machine/vehicle number: 491P, Technical data: - Drilling capacity in steel ST 60 28 mm - Drilling capacity in steel ST 60 32 mm - Drilling spindle adaptor MK 3 - right - left rotation Hjdpfxedkx Ans Agzeg - Drilling spindle stroke 150 mm - drilling spindle speed infinitely variable 80 - 1170 rpm - 2 feeds 0,1 / 0,2 mm/rev - throat 290 mm - max distance table - drilling spindle 780 mm - table with 2 T-slots 480 x 400 mm - Height adjustable via toothed rack with hand crank - Drive 400 V / 0,9 / 1,3 kW - Space requirement approx. W 600 x H 2100 x D 900 mm - Weight approx. 420 kg - with: - coolant device - quick-action drill chuck 1-13 - illumination

Condition: used, machine/vehicle number: 008321, X axis working area: 4200 mm Y axis working area: 1350 mm Hsdpfox A Tdljx Agzsg Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Total number of drilling spindles: 18 Total number of tool changer positions: 22

Condition: used, Year of construction: 1965, bore capacity in steel (diameter) 40 mm Hsdjv S Iqcspfx Agzog total power requirement 4 kW

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Year: 2003 Hedpjxphw Tsfx Agzjg Radius of Arm: 1600mm Spindle Taper: MT5 Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: used, machine/vehicle number: 1109, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN max.workpiece weight: 5000 daN Hjdpodhwzaefx Agzog Weight: 16 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock comes from a lathe -Peak height: 145 mm -Recording: MK4 -Dimensions: 410/260/H320 mm -Weight: 51 kg Hsdpsd Inxpefx Agzog

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm Hedpfx Agjvb Drhozsg The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device *

Condition: used, machine/vehicle number: 004922, Max. panel width: 250 mm Max. panel length: 1500 mm Hsdpfx Ageg E Th Sjzjg No of Top Units: 2 Lateral horizontal groups: yes

Year of construction: 1980, condition: used, work piece width 250 mm Hjdpfxexyaghj Agzog workpiece height 35 mm bore diameter 2 mm

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min Hedpfx Agexz Aygszeg * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: used, Mounting cone: MK 6 Core tip angle: 90 ° Load: 3000 daN max.workpiece weight: 6000 daN Weight: 16,9 kg Hsdjdhwy Tspfx Agzsg

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2013 Equipment and technical data: - Interchangeable drilling gears for: - Line boring - Hinges - Mounting plates - Connecting fittings - Front fastenings - Line boring gear can be used rotated by 90° - Pneumatic hold-down device - Drilling gear system for quick change of vertical drilling modules - Vertical drilling gear: Motor power 1.6 kW - Vertical drilling gear: Speed approx. 2,780 rpm - Power supply: 400 V, 3-phase, 50 Hz - Maximum drilling depth / Y-adjustment: approx. 550 mm - Extraction connection: 100 mm Dimensions: approx. 940 x 1560 x 980 mm Weight: approx. 125 kg Availability: approx. mid/end of January 2026 Hjdpfjxwz Nxsx Agzog Location: Hesse

Condition: used, Year of construction: 1991, spindle mount: MK 4, Work table 600mm x 1200mm Arm travel 600mm Hodpfsx N If Hjx Agzsg Tool holder MK 4 Drilling capacity 40mm in steel Thread cutting device Coolant system Documentation

Condition: used, machine/vehicle number: 008013, X axis working area: 5780 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Hedowuz Ekspfx Agzog Maximum edge height: 60 mm Total number of drilling spindles: 16 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Year of manufacture: 2018 Very little used Clamping cube Digital depth display Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Cube table dimensions: 620 mm x 450 mm x 450 mm Arm reach: 300 mm - 1300 mm Hodpfx Agoxdw Ukozsg Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: used, Retainer metric 80 Hjdodhwzwopfx Agzjg Core tip angle: 60 ° Total length: 380 mm Weight: 18 kg

Condition: used, machine/vehicle number: 008134, X axis working area: 5780 mm Y axis working area: 1930 mm Hjdjw Idgijpfx Agzog Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 4 axes Total number of drilling spindles: 32 Total number of tool changer positions: 28