Used Drilling for sale (4,764)

Condition: excellent (used), CNC FULL Flexible LINE for Drilling and Dowels Inserting (Fitting insertion). With BECKHOFF Numerical Control Composed by the following machines: A) HEDGEHOG Loader with in-feed transverse roller conveyor B) 1st FLEXIBLE CNC Mod. BAT-DTW, through-feed system C) 2nd FLEXIBLE CNC Mod. BAT-DTW, through-feed system D) 3rd FLEXIBLE CNC Mod. BAT-DTW, through-feed system E) 4th FLEXIBLE CNC Mod. BMA-DLS for drilling, montage, glue application and insertion F) Connection TRANSFER Dcsdsm Uyngopfx Ad Njk G) In-feed and rotating system RWA/RWZ- CNC H) In-feed and rotating system ZWA-1- CNC I) CARCASE CLAMP PRESS Mod. KP-3- CNC, through-feed system L) Out-feed transfer

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. Djdpfx Aehvagkjd Nock 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) Dcodpeyyb Suefx Ad Nsk E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Condition: used, bore capacity in steel (diameter) 15 mm throat 215 mm turning speeds 200 - 3600 U/min 350 x 300 mm total power requirement 1,0 kW / Volt tool taper MK 2 weight of the machine ca. 320 Kg dimensions 0,8 x 0,6 x 1,9 mm Bench drill Dsdpfxjzpzb Ss Ad Nock - Base unit with drawers

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Dcedpozlbrvefx Ad Njk Availability: available shortly Location: DE-63934 Röllbach

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Drilling / Milling Machine KNUTH MARK SUPER SV Year of construction: 2021 Travel X: 560 mm Travel Y: 190 mm Travel Z: 400 mm Spindle: CM4 Spindle exit: 120 mm Spindle speed: from 75 to 2500 RPM Table size: 800 x 240 mm Tilting head Scale 3 axes Electronic speed variator Automatic head up/down Automatic X axe travel Manual Y axe travel Supplied with many accessories: Boring heads, clamps holders, etc (see photos) Voltage: 380 V Length: 1400 mm Depth: 1200 mm Djdpfxezqtc Re Ad Nock Height: 2000 mm Weight: approx 500 KG

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 60176, New pneumatic self feed drill unit with 2 signal transmitters and their holders good for drilling or milling Speed (r.p.m. no load): 32,000 rpm Stroke: 40 mm dashpot: 15 mm Motor power: 0.25 kW Dcedjv Tnh Rspfx Ad Nek Total length: 10.63 In. Operating pressure: 5.5 bar lubricated compressed air Suitable for collets (not included) with diameters of 3 to 8 mm Included are 2 signal transmitters (24 V DC, M8 connector, 5 m cable) and holders Other versions (speeds, stroke, etc.) are available upon request.

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Dedpfjzi S Snsx Ad Nsck Width:1800mm Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), spindle mount: MK 4, rotational speed (max.): 3,500 rpm, rotational speed (min.): 130 rpm, throat depth: 300 mm, Alzmetall AB 35 / S Drill press, column drill Pinole travel: 180mm Overhang: 300mm Spindle: MK 4 Drill chuck: 3-16mm Dcjdpfx Ajzqy I Ted Nsk Variable speed: 130 - 3500 rpm Feed rate: 0.1 - 0.2 - 0.3 mm/rev Threading device Coolant unit Vise You are welcome to visit us for an inspection. We will gladly arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, workpiece height (max.): 30 mm, TECHNICAL DETAILS Axis: 920 mm X-axis: 3,000 mm A-axis: 360° Material thickness Z: 12 mm - 30 mm Feed rate: 20 m/min Minimum dimensions (plate): X: 300 mm Y: 120 mm Z: 12 mm Maximum/minimum hole diameter: 3 mm - 35 mm Maximum cutting depth with saw blade: 10 mm MACHINE DETAILS Dcsdpfx Adozkt A Re Nok Motor power: 0.75 HP Voltage: 400 V Required extraction capacity: 2,300 m³/h EQUIPMENT 4-position drill chuck Saw blade in the X direction

Condition: used, machine/vehicle number: 008629, Max. panel length: 1300 mm No of injectors: 1 Dodpozm S Nbjfx Ad Neck Positioning of Units by NC: yes

Condition: good (used), Outreach: 915 mm Taper: MK3 Length: 1700 mm Width: 1,000 mm Dcedpfjd Ixy Isx Ad Nok Height: 2000 mm Weight: 1000 kg

Condition: used, Year of construction: 1998, Second-hand machine Year of manufacture: 1998 This machine can be used to drill corner joints, transom windows and olive joints in loose or compressed timber frames The scanning is carried out at the rebate, the 8 stops for corner bearings and transom windows, as well as for the rebate timber and transom, are automatically engaged once the timber is positioned. The machine features an automatic programme sequence with electric control for the drilling motors, activated by a safety foot pedal Pneumatic connection R 1/4 5–6 bar Extraction velocity 25 m/sec. Extraction nozzle diameter: 120 mm Electrical connection: 0.75 kW Dimensions: 2950 x 650 x 1100 mm Dcsdpfozk Nzpsx Ad Nek Availability: at short notice Storage location: Flörsheim

Condition: used, Second-hand machine For dowel drilling on flat or end faces with roller-bearing-mounted drill shaft and tapered claw coupling Driven by any hand-held drill Working width 650 mm with 7 drill shafts Dedpfjzk Nq Dsx Ad Neck Swivelling drilling beam 0° – 45° – 90° Clamping height 80 mm Minimum drill hole spacing: 30 mm Availability: at short notice Storage location: Flörsheim

Condition: good (used), 12-head drilling machine for sale, Dcsdpfx Adspy D Dwe Nek Table size: 400 x 360 mm

Condition: good (used), Manufacturer: MAS Type: VR 4 Reach: 1000mm Without table! Dedpfjh Eigbex Ad Nock

Condition: good (used), Year of construction: 1990, Unit with side support table External dimensions of drilling machine: Djdpfx Aezqfv Ned Neck Height: 1700 mm Width: 700 mm Depth: 1500 mm Weight: approx. 320 kg External dimensions of the side table: Height: 1100 mm Width: 2600 mm Depth: 1410 mm Condition: good, second-hand

Condition: good (used), operating hours: 200 h, functionality: fully functional, machine/vehicle number: H05107, Bench drill press Knuth SSB 50nSuper MK 4 WORK AREA Drilling capacity 50 mm Threading capacity, steel M 30 Table clamping surface 580 mm x 460 mm Quill stroke 200 mm Manual table travel 515 mm Motorized table travel 405 mm Table swivel range (max.) ± 50° Column diameter 180 mm Distance from spindle nose to table surface 575 mm Distance from spindle nose to base 1165 mm Overhang 360 mm MAIN SPINDLE Dedezqt U Hopfx Ad Nock Speed range 50 rpm - 2000 rpm Spindle taper 4 MK FEED Quill feeds 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 mm/rev

Condition: used, Year of construction: 1990, taper MK 3 serial number 4131 throat 1000 mm documentation ja clamping hydraulisch kW weight of the machine ca. 2,6 t Dcsdszkbqvepfx Ad Nek

Condition: used, Year of construction: 2011, total width: 1,500 mm, total length: 3,000 mm, total height: 1,750 mm, Colour: White Empty weight: 450 kg Dcodpfx Ajzizqgod Nsk - Year: 2011 - Documentation available: No - CE certificate present: No - Serial number: 11060282 - Main motor power [kW]: 1.3 - Table length [mm]: 2000 - Table width [mm]: 520 - Max. drilling stroke [mm]: 60 - Number of spindles [pcs]: 27 - Spindle speed: Manual - Min. spindle speed [rpm]: 2820 - Max. spindle speed [rpm]: 2820 - Distance between spindles [mm]: 30 - Workpiece clamps [pcs]: 10 - Workpiece support/Guide: Traverses - Drills included: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3000mm x 1500mm x 1750mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Power: 280 W Torque: 10 Nm Idle speed: 1050 min-1 Length: 280 mm Dcjdov Inwzopfx Ad Nek Weight: 0.84 kg Other tools for industrial production and maintenance on request.

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels Djdpfxoy Ui Rno Ad Neck left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Year of construction: 1999, condition: used, functionality: fully functional, Manufacturer VITAP Model SIGMA 2TA Machine type Multi support drilling system for line and dowel drillings Year of manufacture 1999 Feed-through line – yes Drilling supports from below – 4 Horizontal drilling supports – 2 Drilling block positionin gmanually Working width max2.500 mm Working depth700 mm Passage height max 40 mm Grid 32 mm – yes Drilling blocks per support – 2 Number of clamping bridges 2 Pneumatic top pressure Drilling support positioning – manually Drilling bars 90° pivotable Dedpfx Adjiffpxo Neck Drilling spindles per support – 2 CE marking – yes Weight 1.600 kg

Condition: used, Second-hand machine Features and technical specifications: Drilling unit comprising a drilling motor with a holder for threaded drill bits with the option to accommodate 6 drill bits in accordance with the drilling pattern of which 5 are for a row of holes spaced 32 mm apart and 1 is offset to the rear at a distance of 32 mm from the Row of holes, e.g. for Häfele Varianta with roller conveyors to the left and right of the drilling machine Dcedpfx Adozk N Tre Njk Availability: at short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 2005, Second-hand machine Year of manufacture: 2005 Features and technical specifications: - Motor: 400 V, 50 Hz, 3-phase, 1.5 kW - Pneumatic single-head drilling machine with 23 spindles - Aluminium ruler with 4 stops (2 profiles on the right/left, 1500 mm each) - with quick-action chuck - 2 patented, accident-proof pressure clamping cylinders - Connection for extraction system in accordance with EC standards - Aluminium drilling beam, spindle centre distance 32 mm - Work table made of MDF and cast iron - Patented spiral system for fine adjustment of the drilling depth - Pneumatic drilling head oscillation with Lockable in any position between 0° and 90° - Fold-down side stops with fine adjustment via counters with decimal display - Drilling height adjustment via dial gauges with decimal display - Back stop, travel up to 300 mm - Fixed stops 37 mm for fitting pot-type band drills - Complies with EC standards - Max. drilling width 704 mm - Max. drilling depth 65 mm Dcedpfxszk N S Uj Ad Nek - Max. workpiece width 960 mm - Max. workpiece length 3000 mm - Max. workpiece thickness 60 mm Availability: at short notice Storage location: 63934 Röllbach