Used Dry Air Generator for sale (35,633)

Condition: used, Screw compressor KAESER type BS 50 Serial no.: 402852 Year of manufacture: 1990 Volume flow: 5 m³/min. Operating pressure: 7.5 bar Ppjdpoiyu Ifofx Abmol Main motor power: 30 kW Electrical connection: 400 Volt, 50 Hz Connection thread: 1 1/2" inch - 1107.90 hours of operation read - 749.00 load hours read - Sound-insulated Dimensions (L x W x H): 1600 x 1070 x 1350 mm Weight: 900 kg Very good condition Was a reserve compressor and has only few operating hours.

Condition: good (used), Year of construction: 2000, Colortronic CTT 30 Granule Dryer For climate- and air-independent drying of thermoplastic granules and regrind prior to processing, removing residual moisture from both the inside and outside of the granules. Colortronic dry-air dryers operate according to the absorption principle. Instead of heating the air, the moisture is absorbed and removed in the drying hopper. Ppedpfx Abjxlrdcomsl Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Year of manufacture: 7/2000 Find more items - new and used - in our shop! International shipping costs on request!

Condition: new, Year of construction: 2024, flue capacity: 175 kW Conventional yeld capacity: 140 kW flue diameter: 200 mm hot air delivery pipes: 3 x 250 mm flue length: 950 mm oven width: 600 mm oven hight: 860 mm air flow: 6300 m³/h power consumption: 8900 W aproximate surface to heat up: 2200 m³ area to be heated: 500/600 m² heater height without hot air conveying pipes: 2200 mm Psdpsk Utrpofx Abmspl heater width: 930 mm heater length: 1700 mm weight: 615 kg

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° You can find more items - new and used - in our store! International shipping costs on request! Ppjdpewb Axrjfx Abmjl

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation Pedswb A Hiepfx Abmepl - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, functionality: fully functional, For sale are 2 Koch CKT 1500 drying plants. One unit from 1999 with 4 drying containers (3x800l/1x1200l), and one unit from 2003 with drying containers (3x100l, 3x200l, 3x300l, 1x400l). The dryers are fully functional and still in operation, and can be inspected until mid-September. Sale is complete with piping, without Koch conveying technology. Price upon request. Ppjdpfx Asw Ry Axobmol

Condition: new, functionality: fully functional, overall weight: 450 kg, Year of construction: 2022, machine/vehicle number: 41728980, THERMOBILE, IMA-200 RHP GB 200-RHP, mobile warm air generator (400 V) with separate exhaust gas duct, mounted oil burner RG 4, heating oil pre-filter, radial fan and plug-in thermostat preparation. Year of manufacture 2022, operating hours: 0 - Nominal heat load 200 kW - Air output 13000 m³/h - Connection 400 V - Pressure 500 Pa - Weight 450 kg Technical highlights of this series: - Burner hood with oil drip pan - Blow-out opening Ø 600 mm - Preparation for recirculation operation (optional intake manifold available, article no. TE41728445) - Thermostat connection prepared (plug-in contact) - Electrical distribution placed in a shock-protected manner - Robust design with large wheels for easy Pjdpfxjvnuq Ij Abmspl Transport even on difficult terrain Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain hats are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a freight forwarder. If you do not have contact with any shipping companies, we will be happy to provide you with addresses or make inquiries for you.

Condition: ready for operation (used), Year of construction: 2010, Mobile oil warm air generator / heater / heater 120 kW - Used device from rental fleet - built in 2007 - for construction heating / building sites / stables / tents / trade fairs / workshops / etc. Ppsdovnu Akopfx Abmsl Offer description: TB 110, mobile oil warm air generator with separate exhaust gas duct, mounted oil burner RG 2, heating oil pre-filter with quick venting and single-line system, radial fan and plug-in thermostat preparation. Nominal heat load: 120 kW Air output: 6500 m³/h Connection: 230 V/50 Hz Motor output: 1.1 kW Weight: 235 kg Dimensions LxWxH: 200 x 90 x 115 mm Accessories such as room thermostat, warm air hoses, tanks and tank heaters, as well as exhaust pipes and rain caps are not included in this offer, but can be offered on request. Note: The buyer can have the item picked up by a shipping company. If you do not have contact with shipping companies, we will be happy to help you with addresses or inquire for you.

Condition: new, Year of construction: 2014, I sell the Hot Air drying tunnel BURKLE Modell: Easy Dry JET 1300 Filter: TRDUE / 700 m3/hr. Ventilator 7,5kW / 6800m3/hr. / 35 m/s Working width: 1400mm Total length: 6,00m Elektric connection 36,5kW Heating system 12 blowing units Heating medium water up to 80°C Max. Heating power 45 kW Max. Temperature of heated surfaces 120°C Ppedpsr Arrwefx Abmjl Siemens Simatic Touch control panel Year 2014. Machine NEW, not used before ! Available immeditely.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,373 h, overall weight: 530 kg, volume flow: 1.41 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, Equipment: refrigerant dryer, APS 15 COMBI DRY X screw compressor On 500 l pressure vessel With refrigerant dryer. Motor 11 kW Output 1.41 m3/min Ppodpfx Aowxzfxebmsl Pressure 10 bar Year of manufacture 2021 Operating hours 4373 MTG

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20526 Podpfoxu A Dfex Abmopl Specifications: Model: AD500 Year of Manufacture: 2020 Voltage: 400V Maximum Working Pressure: 14 bar Weight: 165 kg Condition: In good working order Delivery Status: Ready for delivery Description:Pneumatech AD500 refrigerated air dryer, manufactured in 2020. The unit is in good working condition. Ready for immediate delivery and use. Total Weight: 165

Condition: new, Year of construction: 2025, A compact set including a Theor 20 and an N20S air-dryer. The newest solution applied in pneumatics, along with quality materials and components. Easy handling, solid chassis and high efficiency. Additional double filtration in the air-dryer. Pedpemqlm Tjfx Abmjpl Set by default includes: Theor 20 screw compressor N20S air-dryer 500L Container Theor 20 Compact technical data Compressor Motor power 15 kW Air-dryer Motor power 0.69 kW Data Efficiency at 8 bar 2.6 m3/min Efficiency at 10 bar 2.2 m3/min Outlet G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, functionality: fully functional, Set containing LUFT 1000 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 1000 COMPRESSOR REFRIGERATION AIR DRYER N10S Pjdpfjrh E Dqsx Abmepl 500L TANK Technical parameters LUFT 1000 COMPACT Compressor Engine power 7.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 6 bar 750 lpm Capacity at 8 bar 700L/min Capacity at 10 bar 670 lpm Outlet G3/4" Overall dimensions 1320x650x945 mm Weight 500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Set containing LUFT 1000 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 270l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 1000 COMPRESSOR REFRIGERATION AIR DRYER N10S 270L TANK Psdpfsmqlprox Abmspl Technical parameters LUFT 1000 COMPACT Compressor Engine power 7.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 6 bar 750 lpm Capacity at 8 bar 700L/min Capacity at 10 bar 670 lpm Outlet G3/4" Overall dimensions 1320x650x945 mm Weight 500 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, A set containing THEOR 20 INVERTER screw compressor, N20S refrigeration air dryer. The screw compressor of the Polish brand CORMAK THEOR series is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: THEOR 20 COMPRESSOR with inverter (version equipped with inverter) REFRIGERATION AIR DRYER N20S The set does not include a tank! Possibility to buy additional cylinders Pjdsmqlqdopfx Abmopl THEOR 20 COMPACT technical parameters Compressor Engine power 15kW Dehumidifier Engine power 0.69kW General parameters Capacity at 6 bar 1800 lpm Capacity at 8 bar 1700 l/min Capacity at 10 bar 1600 l/min Departure G3/4" The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 270l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S 270L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Ppsdpfxerh E Egs Abmjl Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, Set containing LUFT 700 screw compressor, N10S refrigeration air dryer and compressed air tank with a capacity of 500l. The screw compressor of the Polish brand CORMAK, the LUFT series, is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Additional double filtration on the dehumidifier! KIT INCLUDES: LUFT 700 COMPRESSOR REFRIGERATION AIR DRYER N10S Ppjdsrh E Erepfx Abmsl 500L TANK Technical parameters LUFT 700 COMPACT Compressor Engine power 5.5kW Dehumidifier Engine power 0.29kW General parameters Capacity at 0-6 bar 680 lpm Capacity at 6 bar 650L/min Capacity at 8 bar 650 lpm Capacity at 10 bar 620 lpm Outlet G3/4" Overall dimensions 1250 x 600 x 895 mm Weight 380 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, The screw compressor of the Polish brand CORMAK, the THEOR H1520 COMPACT series, with an integrated dryer is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key benefits: strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components to ensure safe and effective work a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the radiator with the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filtration system with triple separation for effective work the compressor uses a reliable and reliable solution, which is a direct drive transmission system between the engine and the screw mechanism (via the so-called claw clutch), which ensures: high effective efficiency; more effective leveling of vibrations low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) electronic control from the MAM series allows you to set parameters, including: intervals between service inspections, power failure alarms, phase direction changes, phase loss, overheating. Possibility to buy additional cylinders. Technical parameters: Compressor Engine power 15kW Dimensions 1550x750x1200mm Weight 500kg Exhaust thread G 3/4" General parameters Capacity at 0-6 bar 1350L/min Capacity at 6 bar 1350L/min Capacity at 8 bar 1250L/min Capacity at 10 bar 1250L/min Capacity at 12 bar 1150L/min Capacity at 14 bar 1150L/min Capacity at 16 bar 1050L/min Capacity at 18 bar 930L/min Capacity at 20 bar 930L/min The price is a net price. Price does not include shipping costs. Psdpfx Abjmrmx Tomjpl For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, The screw compressor of the Polish brand CORMAK, the THEOR H1515.8 COMPACT series, with an integrated dryer is the most modern solutions used in pneumatics in combination with the use of high-quality materials and components. Low operating costs, ease of use, ergonomic and solid construction as well as high efficiency of the device guarantee effective and trouble-free operation. Key benefits: strong, compact design of a screw compressor from a European manufacturer automation based on modern and quality-tested components to ensure safe and effective work a specially designed cooler ensures optimal working conditions even when the device is heavily loaded connection of the radiator with the module through good quality hydraulic hoses the technology used allows for significant energy savings special air outlet design for more efficient work a powerful and robust pump is installed in the compressor unique filtration system with triple separation for effective work the compressor uses a reliable and reliable solution, which is a direct drive transmission system between the engine and the screw mechanism (via the so-called claw clutch), which ensures: high effective efficiency; more effective leveling of vibrations low noise of the screw compressor thanks to a specially designed soundproof housing (sound insulation boards) electronic control from the MAM series allows you to set parameters, including: intervals between service inspections, power failure alarms, phase direction changes, phase loss, overheating. Possibility to buy additional cylinders. Technical parameters: Compressor Engine power 15kW Dimensions 1550x750x1200mm Weight 500kg Exhaust thread G 3/4" General parameters Capacity at 0-6 bar 1700L/min Capacity at 6 bar 1650L/min Capacity at 8 bar 1500L/min Capacity at 10 bar 1500L/min Capacity at 12 bar 1350L/min Capacity at 14 bar 1350L/min The price is a net price. Price does not include shipping costs. Ppodpfx Abomrmy Aemsl For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  Application: Air dryer for 7 7-bar low-pressure compressor Flow Capacity: 760 L/s Operating Pressure: Up to 14 bar Power Supply: 5.6 kW Refrigerant: R410A Weight: 380 kg Podpoxrnn Djfx Abmepl

Condition: used, Year of construction: 2010, Operating hours: 58,730 h Ppsdpsydlycefx Abmol Technical data: Max. compressed air pressure: 14 bar Ambient temperature, max.: 50°C Refrigerant: R410A, 0.86 kg Connection: 230 V Weight, approx.: 154 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, Refrigeration dryer with condensate separator, year of manufacture 12/2020, capacity/volume flow: approx. 1.75 m³/min (≈ 105 m³/h / 1050 l/min), pressure dew point: typically +3 °C (under reference conditions), max. operating pressure: up to approx. 14 bar, dimensions: approx. 255×455×708 mm, weight: approx. 36 kg, in good condition. Price ex location. Transport available at extra cost! Pedeybbggjpfx Abmjpl

Condition: good (used), Year of construction: 1999, Refrigeration dryer Manufacturer: KAESER Model: TE 121 Year of manufacture: 1999 Motor rated power: 2.1 kW Serviced by Kaeser. 21126ä Ppsdpfx Ajttwzbebmol

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Premium dryer with inverter Atlas Copco FD220VSD-G 13.20 m³/min. Year of manufacture: 2023 Psdpjya Dn Defx Abmepl

Condition: used, Year of construction: 2021, Max. pressure: 16 bar Pjdpfx Ajxz Al Njbmspl Power: 0.81 kW