Used Ejector Sleeve for sale (1,575)

Condition: used, Year of construction: 2004, Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  - Output: up tp 50,000 bph - Last used for:  - 0,25 l Vichy bottle - 0,5l Set 1 - 0,5l Set 2 - 0,5l Set 3 - 0,7l GDB - 0,75l GDB Hedpjxch Acofx Amtst - Inspection modules - Bottom inspection camera - Sealing surface inspection camera - Thread inspection camera with cone optics - Side wall inspection camera - Contour detection and color detection with camera Accessories/scope of delivery    - Ejector - some spare parts available - some conveyors

Condition: used, Technical details: pressure: 250 t Hsdpfx Amsu N Ddwotst stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm *

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder, clamping sleeve, sliding gate sleeve Manufacturer: Helmet, helmet rail -Type: Profile 500 -Length: 250 mm Hjdpfxjv R Tdrs Amtet -Dimensions: see photos -Quantity: 122x helmet rails available -Price: per piece -Minimum order quantity: 2 pieces -Dimensions: 250/65/H60 mm -Weight: 1.3 kg/pc.

Year of construction: 2022, condition: new, grinding diameter:260 mm grinding length:1000 mm centre height:130 mm Hjdpog N Nh Defx Amtot dimensions of grinding wheel:400x60x127 mm grinding wheel speeds:1700,1900,2200 U/min grinding head swivelling:+/- 30 Grad table swivelling +/-:9 Grad Tailstock spindle taper:4 MK grinding wheel motor:4 kW hydraulic motor:1,5 kW work piece motor:0,37 kW net weight:2400 kg gross weight:2950 kg PLC control:Siemens S7 tailstock sleeve movement:pneumatic, via foot padel operating panel:New Rittal operating panel with touchscreen screen from Siemens centers sleeves:2 grinding wheel flange:2 unused cylindrical grinding machine, manufactured by ABA type URS 400 Year, 2009 Further technical data, and standard and optional equipment, as defined in Appendix. Payment: 100% before loading of the machine Warranty: no

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding Hedpfx Amevxkv Ujtot -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: excellent (used), Precision grinder for cutting ejectors to size and grinding fronts Grinder features: A precise device enabling semi-automatic cutting of ejectors to size and grinding fronts in one clamping The grinder can be adjusted during operation The belt tension can be adjusted and controlled automatically (the greater the resistance, the tighter the belt) Grinder for cutting ejectors and grinding fronts Hodpsvyuw Sofx Amtot Grinder for cutting ejectors and grinding fronts Manufacturer code 100 Grinder parameters: Motor power - 0.735kW Max. speed - 3 600 rpm Diameter range - ⌀1-25 mm Maximum length - 300 mm (optionally 500 or 600 mm) Length tolerance for ⌀25x300 mm: +/- 0.01 mm Dimensions LxWxH: 430x360x500 mm Weight - 109 kg Link to the video on YouTube:

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Hodovzmtzopfx Amtst Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: good (used), Quick-action clamping device, quick-action clamp, quick-action vice, drilling device, machine vice, drilling machine vice, clamping sleeve, collet Hodev Uw Amjpfx Amtst -Thread cutting head: self-opening thread cutting head -Type: CH7-44 -Image: M48 -Collet: Ø 25 mm -Dimensions: 330/210/H135 mm -Weight: 17.4 kg

Condition: good (used), Tool holder, milling holder, milling tool Hedpfx Amecwb Nnstet -Number: 25x SK50 mounts -various: versions -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 10x SK50 mounts Hedpfx Aecx Sdnsmtet -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 40 kg

Condition: used, Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools Hsdpfx Amscx Sdretet -suitable for tool changers -Sale: only complete -Weight: 10 kg

Condition: used, Tool holder, milling holder, milling tool -Adapter -Take: SK40 -Tool holder: MK2 -with: CNC pull studs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Number: 8x recordings available -Price: per piece -Total length: 155 mm -Weight: 0.8 kg/piece Hedpoc Il Exofx Amtet

Condition: good (used), Tool holder, milling tool holder -Number: 21x SK50 recording -various versions -Drill chucks, surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -Price/Sale: complete Hsdpec Innzefx Amtot -Weight: 82 kg

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Hjdpfxoc Umfts Amtjt Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request.

Condition: good (used), Three-jaw chuck key, three-jaw lathe chuck, faceplate chuck key, chuck key Hodpsfth Sbefx Amtst -Hexagon: SW 24 mm -Sleeve: Ø 45 mm -Dimensions: 870/45/H610 mm -Weight: 6.4 kg

Condition: used, Tool holder, milling holder, milling tool, boring head, spindle tool, reducing sleeves, clip-on holder -Milling mount: mount MK4 -Measures: see pictures -Dimension: Ø 56 x 670 mm Hodpof Sgxdefx Amtet -Weight: 7.5 kg

Condition: new, TC 180 x 1000 V Center distance: 1000 mm Center height: 178 mm Swing over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, stepless: 30 - 2500 RPM Mechanical feed steps: 3 Motor power: 2.2 kW Longitudinal feed Z: (40) 0.044 - 1.96 mm/rev Cross feed X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Inch thread: (32) 4 - 56 TPI Module thread: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Hodpfxeir Imye Amtst Tailstock spindle diameter: Ø 40 mm Tailstock spindle taper: MK 3 Tailstock quill travel: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance test report according to DIN - Precise, hardened, and ground guides - Robust headstock with oil circulation lubrication, precision-bearing spindle, gears hardened and ground for lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking system (V models) - Torsion-resistant machine beds made of MEEHANITE quality cast iron, stress-relieved by annealing and with multiple ribs for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gear - Pulse button for main spindle - CE / IEC as well as German documentation and German service Standard equipment (standard accessories): - Machine stand with splash guard back panel - 3-jaw chuck - 4-way tool post - Foot pedal with mechanical braking system - Coolant system - Chuck guard and spindle cover in accordance with European CE safety standards - 1 Fixed center for main spindle - 1 Fixed center MK3 - 1 Test report - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tool Available options for this lathe: - 3-axis digital display - Quick-change tool holder system Multifix also available as geared variants

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t Hsdpfxou Id Rus Amtst space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: used, Technical details: turning diameter over bed: 1040 mm turning diameter over support: 720 mm centre distance: 5400 mm center height over bed: 540 mm control: Siemens 828D CNC mit shop turn turning dia. in gap: 1300 mm length of gap: 640 mm spindle bore: 152 mm Hodpfx Aju Ix Rpjmtet revolution per minute: 3,5...1000/ 4 steps U/min feed:: x-Achse: 37,24 (m/min) m/min feed:: z-Achse: 21,91 (m/min) m/min force of feed longitudinal: x-Achse: 6,44 (KN) N feed force Z - max.: 17,2 (KN) N tailstock taper MT: MK 6 tailstock quill stroke: 300 mm total power requirement: ca. 30 kW weight of the machine ca.: 14,1 t space requirement approx.:: L:7,7xB:1,7xH:2,0 m CNC Lathe with shop turn Geometric overhaul is in procedure. Equipment: - headstock Morse 6, travel of spindle sleeve 300mm - thread cutting possible (metric thread, inch threads, module threads) - multi quick steel holder swiveable 360° - 3-jaw lathe chuck Ø=630mm - chuck protection - 2 steady rests (Lynettes) (1x fixed + 1x fixed open) - 4 pcs tips for tailstocks - 5 x multi quick change steel holder for chisel - 1 x drill chuck 16mm + 2x drills with MK-cone sleeves 68,5mm & 24,75mm - 1 lot self constructed clamping means Accessories: - face chuck Ø=800mm (adaptation necessary) - CNC turning with shop turn - your benefits at first glance: - flexible programing via graphic interactive (without DIN/ISO knowledge) or text programming with contour definition and cycle support - user friendly operation through practical set up -and measuring operations, clearly arranged tool managment and 3D-Simulation - increase of productivity via supporting PC-Software for work preparation without machine assignment *

Year of construction: 2012, condition: good (used), Medium-pressure conveying system for wood chips approx. 4 tons per hour Conveying line originally 180 m, 150 mm, partially available Air flow rate approx. 2,350 m³/h Hjdpfxjb Uyizj Amtet Motor power Three-phase motor according to IEC 55 kW Degree of protection IP54 1 Housing made of high-quality gray cast iron, equipped with two axis-parallel and centrally arranged, dynamically balanced rotary pistons, with hardened and ground, helically toothed precision control gears, each mounted in roller bearings. Drive via V-belts, with the two pulleys and the associated high-performance narrow V-belts, as well as a protective cover. 1 Drive unit with motor mounting rails, shaft connection with easy-to-assemble taper-lock clamping sleeves, completely mounted on a common base frame. 1 Combined intake filter silencer (absorption silencer) 1 Resonance absorption pressure silencer, designed as a base frame 1 Base frame 1 Pressure valve 1 Check valve 1 Elastic connecting sleeve with clamps 1 Manometer 1 Set of vibration isolators with mounting screws 1 Electrical pressure monitoring consisting of a pressure transmitter and a display device, as well as an electrical output signal 1 Sound enclosure made of galvanized sheet steel with an oil collection tray and ceiling coating RAL 5001, segment design with internal lining and forced ventilation, fan wheel driven by the blower shaft. Sound enclosure for outdoor installation.

Condition: good (used), Tool holder, milling tool holder -Number: 4x SK50 recording -Inner diameter: 12/16/20/25 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 15 kg Hodpfxsb A Smxs Amtjt

Condition: good (used), Collet chuck, tool holder, tool holder, milling chuck, milling tool -Recording: SK40 -Clamping sleeves: 28 mm Price: complete Quantity: 10 available -Weight: 15 kg Hodpfsb A Stfex Amtjt

Condition: good (used), Tool holder, milling tool holder Hodpfx Ameb D I Dkstjt -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

Condition: good (used), Tool holder, milling tool holder -Number: 8x SK50 recording -various versions Hjdpjb Ecdpjfx Amtet -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 26 kg

Condition: good (used), Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm Hodsb Ecd Dopfx Amtot -Weight: 4 kg