Used End Mill Machine for sale (67,638)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The machine was previously owned by a well-established Formula 1 team from Central Europe! The milling head has been freshly inspected by the machine manufacturer, making it partially overhauled and fully functional. The machine was always covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Gbedpfx Aszcqncohnjn Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis tilting milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area enclosure Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by prior arrangement.

Condition: used, Year of construction: 2007, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table width: 5,500 mm, table length: 2,600 mm, total height: 4,900 mm, total width: 16,200 mm, total length: 9,000 mm, overall weight: 55,100 kg, CNC Floor Type Bed Milling Machine CNC Control Heidenhain iTNC 530 Controlled NC Table 1600 x 1600 mm Table dimensions 5500 x 2600 mm Movement X-axis 8000 mm Movement Y-axis 2100 mm Movement Z-axis 1300 mm Movement W-axis 1000 mm C-axis-swivel of milling head body 360 ° A-axis-swivel of milling head 180° Spindle speed 36 - 6.000 R/min Gedpfx Aheza Egnenobn Spindle motor 42 / 30 kW Spindle taper DIN 69871-SK 50 Tools in tool magazine 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, X axis (longitudinal) 800 mm Y axis (transversal) 400 mm Z axis (vertical) 300 mm Table length 1340 mm Table width 300 mm Gbsdpfx Aow Tyyiohnen Max. spindle speed 2500 rpm Spindle motor power 3 kW Dimensions (L x W x H) 1800.0 × 2000.0 × 2080.0 mm Weight 2050 kg

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate Gbjdpfx Ahezcd D Ronen (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1994, Used machine Year of manufacture: 1994 Features and technical data: - Cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front side - 4 speeds with electronic speed display - External spindle lock - Milling fence with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top and bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment: 220 mm - Table opening: 300 mm - Usable spindle length: 1890 mm - Extraction ports: 150/120 mm Godpfx Aoxllw Ajhnobn - With 4-roller power feed unit Weight: 600 kg Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Installation dimensions: 1200x80x1350 mm Fence jaws made of wood Godpfxjxllxae Ahnobn Incl. Holz Her 3-roller feed unit incl. stand With chassis Availability: short-term Location: Röllbach

Condition: new, CATALOG NUMBER HL001 - New machine, in stock – Pre-milling unit – Radial scraper + polishers TECHNICAL DATA - Panel thickness: 45mm - Edge thickness: 0.4 mm – 3 mm - Min panel width: 90mm Gbedpfozccuujx Ahnsn - Min panel length: 90mm - Feed speed: 7m/min - Pre-milling: 9000 rpm - Top/bottom: 10500 rpm - Front/back: 8800 rpm - Polishing: 2800 rpm - Main motor: 6kW - Feed power: 0.75kW - Pre-milling power: 1.5kW - Glue spindle power: 0.25kW - Top-bottom milling power: 0.18kW - Top milling power: 0.55kW - Top polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Bottom polishing motor: 3-phase 0.12 kW, 1-phase 0.18 kW - Working table height: 856mm, extended support width: 560mm - Extraction connection: 3x100mm - Dimensions (L/W/H): 3200/1200/1200mm, weight: 660kg Net price: 49,900 PLN Net price: 11,880 EUR based on 4.2 EUR exchange rate (Prices may change with significant fluctuations)

Condition: excellent (used), Year of construction: 1993, x-travel 400 mm y-travel 375 mm z-travel 350 mm turning speeds 63 - 4000 U/min spindle taper ISO 40 Pull studs ISO TYP B quill stroke 50.0 mm table: 650 x 350 mm workpiece weight max. 200 kg T-slots 5x 14H7 feed range 10 - 1000 mm/min rapid traverse 1.5 / 1.0 m/min Number of working hours ca. 504 h control DIGI "VRZ 650" voltage 380 V total power requirement 8.0 kW weight of the machine ca. 1550 kg. range L-W-H 1640 x 1580 x 1840 mm from a training center very little run (!!) operating hours approx. 504 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * automatic tool clamping with clamping/pull bar * Swivel milling spindle guard - Robust work table incl. T-slots ... 650 x 350 mm * Number/size of T-slots 5 pieces 14H7 * Distance T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray Godpfxozbc Dye Ahnebn - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: excellent (used), Year of construction: 1993, x-travel 500 mm y-travel 380 mm z-travel 350 mm tool taper ISO 40 spindle turning speed range 63.0 - 4000 U/min feeds 10 - 1000 mm/min quill stroke 50.0 mm table-size 800 x 360 mm table load ca. 250 kg T-slots 14H7 - 5/63 mm rapid traverse X-axis 1.5 m/min rapid traverse Z-axis 1.5 m/min rapid traverse Y-axis 1.0 m/min Control DIGI "VRZ 650" Number of working hours 810 h voltage 380 V Gjdpfx Ajzbc Dgohnsbn control voltage 110 V engine output 8.0 kW weight 1850 kg dimensions of the machine ca. 1880 x 1796 x 1840 mm from a training center very little run (!!) operating hours approx. 810 hours Equipment: - robust conv. electro-motorized universal milling machine - HEIDENHAIN digital display incl. control panel * swiveling, front right * display font 0.005/0.001 mm - Electro-motorized adjustment of all axes (X/Y/Z axis) * rapid traverse in all 3x directions * Manual adjustment via handwheel also possible - Infinitely variable speed adjustment - Vertical milling head with quill adjustment * ISO 40 tool holder * Automatic tool clamping with clamping/pull bar - Robust work table incl. T-slots ... 800 x 390 mm * Number/size of T-slots 5 pieces 14H7 * Distance between T-slots 63.0 mm * Safety housing (own construction) - Coolant device incl. lower chip tray - Counter support = horizontal milling device - Halogen/machine lighting - Central lubrication incl. container - Original operating instructions

Condition: reconditioned (used), Tool milling machine: Deckel Type: FP 2 Condition: Geometrically overhauled, used Year of manufacture: 1980s, geometric overhaul in 2026 Technical data: Travel distances X/Y/Z, approx.: 400 / 200 / 400 mm Tool holder: S20 Spindle speeds: (18) 40 - 2000 rpm Feeds: (18) 8 - 400 mm/min Head swivels: 180° Equipment: - 3-axis digital display, new - Spindle protection device with limit switch, new - Machine light, new - Horizontal and vertical spindle Gbedpozcdarsfx Ahnjn - Fixed angle table - Coolant system - Chip tray

Condition: excellent (used), Year of construction: 1993, Vertical spindle mount SK 30 Speed range 265 – 3000 rpm Drive power 1.5 / 2 hp Horizontal spindle mount SK 30 Gsdezbikmepfx Ahnsbn Speed range 50 – 1500 rpm Drive power 3 / 4.2 hp Table surface area 800 x 200 mm Longitudinal travel X-axis, automatic approx. 600 mm Transverse travel Y-axis, automatic approx. 200 mm Vertical travel Z-axis, automatic approx. 400 mm Distance between table and milling spindle 300 mm Feed rates, stepless 30 - 340 mm/min Rapid traverse yes Dimensions L x W x H approx. 1300 x 1250 x 1800 mm Weight 900 kg Accessories / Special features: • 3-axis digital display ELESTA • Vertical milling head, SK 30 with boring quill, swiveling left-right • Horizontal milling attachment, SK 30 • Feed in all 3 axes, steplessly adjustable via potentiometer on the control panel • Rapid traverse • Rotary table, swiveling left-right • Coolant system • 2-stage main motor • Central lubrication This very good GUALDONI machine comes from an educational institution and can be inspected and demonstrated under power at any time by prior appointment. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2000, Table size: 1340 x 800 mm + table extensions Table height: 870 mm Control panel at eye level Swivel range: -5 - 45° Aigner integral stop Gjdpozb N T Ijfx Ahnsbn Spindle speeds: 3000 / 4500 / 6000 / 9000 1/min Vertical adjustment: 120 mm Milling arbor: 30 mm / MK 5 Dust extraction port: 2x 120 mm Weight: approx. 1000 kg Storage location: Supplier

Condition: used, Year of construction: 2020, x-travel 810 mm y-travel 610 mm z-travel 640 mm b-axis 360 ° Control Ultimax spindle tunring speed 8.000 U/min power capacity 56 kW tool taper SK 50 rapid traverse 45/40/45 m/min auto power on hours ca. 13.674 h spindle hours ca. 4.211 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gsdpfx Ahszbmzvjnebn Technical features & accessories: - Internal coolant system 40 bar - Dual pallet changer 500mm x 500mm with clamping tower and zero-point clamping system (Quant) Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), functionality: fully functional, Internal article number: 26007 Universal milling machine Deckel FP1 Travel distances: X300 / Y160 / Z340 mm Spindle stroke: 60 mm Connection power: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Godpfxozb Ni As Ahnsbn Tool holder: SK40 Feed rate: Continuously variable, 5-500 mm/min Rapid traverse function: Not operational! The machine comes from an educational institution and is in good condition. You are welcome to inspect the machine while it is powered on, in our more than 500 m² heated storage area.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Final price, as differential tax applies according to §25a of the German VAT Act (UstG). You will receive a proper invoice! Internal article number: 26043 CNC milling machine Optimum F100 Year of manufacture: 2007 The machine comes from a public educational institution. Control system: Siemens Sinumerik 802 S base line RS232 interface Spindle mount: ISO40 Speed: 100 - 6000 rpm Travel distances: X 450 / Y 300 / Z 400 mm Table: 920 x 280 mm Table load: 300 kg + Operating manual + Programming manual + Electrical wiring diagram + Accessories (Various tool holders, including various MK4 holders (reduction from basic mount to MK4 available)) + 2-axis digital display Heidenhain + Operating manual + Coolant pump Speed: 90 - 1800 rpm Travel distances: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Rapid traverse: 900 mm/min Power: 1.6 kW / 380V L x W x H: 150 x 150 x 175 cm Gjdpfxezb I Tgs Ahnjbn Weight: 1300 kg The machine is fully functional and can be inspected in operation by arrangement, in our heated warehouse with over 500 m² of space.

Condition: good (used), functionality: fully functional, Internal article number: 26047 Universal milling machine Thiel Duplex 158 + Accessories (Various tool holders, including various MK4 holders (reduction from basic holder to MK4 available)) + 2-axis digital display Heidenhain + Operating manual + Coolant pump Speed: 90 - 1800 RPM Gsdpfx Ahjzb I Nzsnebn Travel: X 400 / Y 200 / Z 400 mm Feed rate: 10 - 160 mm/min Rapid traverse: 900 mm/min Power: 1.6 kW / 380 V L x W x H: 150 x 150 x 175 cm Weight: 1300 kg The machine is fully functional and can be inspected under power by appointment in our heated warehouse, which covers an area of over 500 m².

Condition: excellent (used), Year of construction: 2015, operating hours: 23,488 h, functionality: fully functional, travel distance X-axis: 20,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, UNISIGN UNIPORT 7000 CNC Portal Milling and Drilling Machine For sale is a heavy-duty CNC portal milling/drilling machine, type UNISIGN UNIPORT 7000, from an Italian group that is relocating product-specific machining operations abroad. Due to compliance and safety regulations, as well as the associated workpiece protection measures, the complete photographic documentation of the machine will only be provided upon request to select, end-user customers. The machine features a very large working area with 20,000 mm of travel in the X-axis, 3,500 mm of travel in the Y-axis, and a robust portal design suitable for large and heavy workpieces. Technical specifications: Manufacturer: UNISIGN Type: UNIPORT 7000 Machine type: CNC Portal Milling/Drilling Machine Control system: Siemens Sinumerik 840-D Travel distances: X-axis: 20,000 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Table: approx. 22,250 x 3,170 mm Max. table load: 2,000 kg/m² Portal clearance width: 3,000 mm Distance from spindle nose to table: 250 – 1,500 mm Spindle: Tool interface: HSK 100 Spindle power: 36 kW Max. spindle speed: 4,000 rpm Max. torque: 1,350 Nm Gearbox: 2-stage Machining performance in C45 steel: Full drilling: Ø 130 mm Thread drilling: M55 Milling performance: approx. 1,200 cm³/min Tool magazine: Chain magazine with 48 positions Max. tool length: 500 mm Max. tool weight: 25 kg Tool change time: approx. 10 seconds Feed rate / Rapid traverse: Rapid traverse X/Y/Z: 40,000 mm/min Feed rate range: 5 – 40,000 mm/min Machine data: Machine weight: approx. 146,000 kg Footprint: approx. 28,500 x 10,800 mm Gsdpfezcqw Rsx Ahnsbn Overall height: approx. 5,000 mm Connected load: approx. 80 kVA Electrical system: 400 V / 50 Hz / 3 phases Description: Heavy-duty CNC portal milling machine with a stable portal design, suitable for machining large and heavy workpieces. The machine is equipped with a Siemens Sinumerik 840-D control system, a powerful main spindle, a large table, and an automatic tool magazine. Ideal for mechanical engineering, large part machining, mold making, steel construction, energy technology, or similar applications. Technical specifications are based on available documentation. Subject to change and errors. Inspection possible by appointment.

Condition: used, Year of construction: 2000, travel distance X-axis: 9,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,500 mm, table width: 1,200 mm, table load: 5,000 kg, table length: 9,500 mm, Bed Milling Machine 5-axis Table size 9500 x 1200 mm. Movement x-Axis 9000 mm. Gbjdpfx Aezauvfehnon y-Axis 1500 mm. z-Axis 1500 mm. Max table load 5000 kg/mtr Swiveling of vertical milling head 1°x1º CNC Control Heidenhain TNC 430 CB If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1971, hobbing length 1750 mm milling width 260 mm max. module 10 mm table size incl. water gutter 460 x 2100 mm table clamping surface: 250 x 1850 mm cutter width - max. 100 mm feed of the milling slide, stepless 0 - 500 mm/min. rapid traverse feeds 3000 mm/min milling head -swivable +/- 30 ° Rotation speed range of milling head, in 9 steps 29 - 178 rpm Milling head swivable 2 sides helical gearcutting 30 ° weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation Gbsdpfoylpzyjx Ahnjn

Condition: excellent (used), X-axis: 6,000 mm Y-axis: 1,500 mm Z-axis: 1,500 mm Max. workpiece size: 6,000 x 1,500 x 1,500 mm Spindle connection: SK50 Spindle speed: 4,000 rpm Gjdezcpwvjpfx Ahnobn Control system: HEIDENHAIN TNC 426 Including documentation. Machine was overhauled in 2002, is in very good condition, and can be inspected while powered on.

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Godpfx Asyuty Sshnjbn Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount Gbodpfovutw Hjx Ahnsn MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Gsdpfx Ahohp Rc Ionobn Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Space requirement width [...]

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Gjdpfx Asr Ig H Tohnebn Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Gbodpfx Ajg U Uv Uehnon Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A