Used Face Lathe for sale (6,090)

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, The face turning lathe PORĘBA TR-100C has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: delivery time 3,5 months, starting from the order Dedpfx Aohyg Iyok Ascp Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration

Condition: excellent (used), Faceplates Diameter 625 mm Dcjdpfxe Agw Uaj Ak Aep Mounting: KK11 Taper diameter 196.88 Bolt circle 236 mm 6 studs, M20 Bore diameter 220 mm Weight 235 kg

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. Dcodpfx Aj Agu A Ssk Asp The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Dcjdo Aduf Dspfx Ak Aop Loading: December 1st to December 10th. Centering device Faceplate diameter: 1,000 mm 3-jaw chuck diameter: 400 mm Dimensions Length: 1,000 mm Width: 500 mm Height: 1,100 mm Weight Weight: 300 kg EQUIPMENT Faceplate 3-jaw chuck

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, turning diameter: 2,200 mm, faceplate diameter: 2,000 mm, travel distance X-axis: 1,700 mm, travel distance Y-axis: 400 mm, controller model: Siemens 840 D, No reserve price – guaranteed sale to the highest bidder! The machine underwent a full overhaul in 2015 and was retrofitted with a Siemens 840 D CNC control system! TECHNICAL DETAILS Faceplate diameter: 2,000 mm Turning diameter over table: 2,200 mm X-axis travel: 1,700 mm Z-axis travel: 400 (+550) mm Stepless faceplate speed range: 0.28–160 rpm Center height over table: 1,140 mm Dcsdpfx Aex Db S Tsk Asp Main spindle diameter: 285 mm Spindle bore: 100 mm Torque at faceplate: 25,000 Nm Max. workpiece weight: 5,000 kg MACHINE DETAILS Control: Siemens 840 D Total power requirement: 75 kW Dimensions & Weight Space required: approx. 6 x 3.5 x 3 m Machine weight: approx. 21 t

Condition: good (used), two very well-preserved faceplates Dcedpfx Akez Nqdho Ajp

Condition: excellent (used), Röhm faceplate in very good condition Diameter 450 mm Mounting method – see image Dcjdpfxozhridj Ak Aep

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Dcjdertrlzepfx Ak Aop Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm Dcodpfx Asy H Hc Eok Aop TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS 2 AXIS DIGITAL READ OUT TAPER TURNING

Condition: used, Year of construction: 1986, Technical details: Dsdpfx Ake Ahw Eve Aocp turning diameter over bed: 490 mm turning dia. over face-slide: 280 mm turning length: 1000 mm Distance between centres: 1000 mm centre height: 240 mm bed width: 350 mm revolution per minute: 11,2 - 2240 U/min max. torque on the spindle: 1600 Nm output: 11 KW external spindle dia. in forward position: 100 mm spindle passage: 63 mm tailstock quill diameter: 70 mm longitudinal feeds:: 0,05 -3,5 mm/U cross feed: 0,025 - 1,75 mm/U tailstock taper ISO: MK 5 tailstock quill stroke: 160 mm voltage: 380 V Weight approx.: 2,4 t dimension machine approx.LxWxH: 2,7 x 1,4 x 2,0 m The VOEST-ALPINE WEIPERT W 490/1000 is a conventional centre lathe with lead screw and feed rod, featuring a robust industrial design. The machine is designed for a wide range of turning operations in mechanical engineering, toolmaking, as well as repair and maintenance workshops. It is suitable for machining various metal workpieces and can be used for both single-part production and small-batch manufacturing. Thanks to its traditional design with lead screw and feed rod, the lathe offers versatile machining capabilities, including longitudinal turning, facing and thread cutting. The machine comes from a vocational training workshop and has seen very little use. *

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm Dcjdpfehutpvox Ak Asp turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Condition: like new (used), Year of construction: 2011, functionality: fully functional, turning diameter over cross slide: 355 mm, spindle bore: 85 mm, turning diameter over bed slide: 560 mm, center height: 280 mm, turning length: 2,000 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, Turning diameter in gap: 785 mm, Huvema HU560 x 2000 Gap Bed Centre Lathe Year 2011 , CE Rated Spindle Speeds 25-1600rpm Distance Between Centres 2000mm Swing Over Bed 560mm Swing Over Cross Slide 355mm Tail Stock MT5 2 Axis Newall DRO Quick Change Tool Holder With Holders D1-8 Camlock Chucks Excellent Condition Interlocked Guards Work Light & Coolant System Machine Comes With: 3 Jaw Chuck & Reverse Jaws - 300mm Djdpfx Akezfguij Aecp 6 Jaw Chuck - 300mm 4 Jaw chuck - 400mm Faceplate - 450mm Fixed Steady x 2 Travelling steady Fully Serviced And Ready For Production

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Manufacturer: GIGANT Model: G2-800/2 Year: 1997 Condition: Used Stock number: 0376 Maximum upper slide pressure: 800 tons Number of pressure points: 2 cylinders Slide dimension: 1,350 mm Table dimension: 1,800 mm Die height at BDC: 450 mm Die mounting plate size: 3,200 x 2,200 mm Slide size: 3,200 x 2,200 mm Lower blank holder stroke: 510 mm. Djdpsx R U Nhjfx Ak Ajcp

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, center width: 2,000 mm, rotational speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 1,050 mm Distance between centers: 2,000 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Workpiece weight: max. 5,000 kg MACHINE DETAILS Control: Conventional Dcodpfx Aj Af Hduek Ajp Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,700 mm Machine weight: 8,000 kg EQUIPMENT Four-jaw chuck Fixed steady rest

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 145078, overall weight: 4,600 kg, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Weight: 4,600 kg EQUIPMENT Chuck Note: The machine is sold without tooling. Dcsds Agfi Djpfx Ak Ajp The following technical data are based on manufacturer specifications. The seller cannot guarantee their accuracy: TECHNICAL DETAILS Swinging diameter over bed: 525 mm Swinging diameter over cross slide: 350 mm X-axis travel: 190 mm Rapid traverse X/Z: 30 m/min Main spindle speed: 35–4,000 rpm Main spindle power: 18.5 kW Spindle bore: 76 mm Bar passage: 64 mm

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Dcjdpfxewhylve Ak Asp Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 96101805, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 96101805 Control system: Siemens Sinumerik Electrical Data Operating voltage: 400 V Frequency: 50 Hz Control voltage: 220 V Connected power: 105 kW Rated current: 200 A Spindle and Machining Area Dcsdpfj Ahg D Tex Ak Ajp Diameter of rotation over the bed: max. 185 mm Diameter of rotation over the compound slide: max. 185 mm Spindle bore: 205 mm Number of bed slides: 2 Number of compound slides: 2 Longitudinal travel: 800 / 2,000 mm Cross travel: 320 mm Tailstock Arbor taper: MK 5 Arbor diameter: 110 mm Manual tailstock travel: max. 300 mm Transport Transport: possible on a standard truck EQUIPMENT Chip conveyor Coolant system Loading system Large quantity of VDI tool holders VDI tool holders, some equipped with cutting tools Documentation

Condition: used, Year of construction: 2010, Technical details: turning diameter: 1000 / 700 mm turning length: 3000 mm face slide travel: 600 mm turning diameter over slide: 700 mm turning speeds: 1-1.800 1/min transmission ratio: 2 spindle: 46 (60%) kW spindle bore: 132 mm quill stroke: 280 mm Dcjdpfx Asr U Skhjk Aop workpiece weight max.: 2.560 kg total power requirement: 38 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 5 x 2,6 x 1,9 m teach in lathe, PARAT tooling system, SCHUNK ROTA NC 500-160 hydr. power chuck, tailstock, chipconveyor *

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Speed range: 19–2,000 min⁻¹ Turning length: approx. 1,500 mm Center height above support: 260 mm Turning diameter above support: approx. 520 mm Center height above support: 200 mm Turning diameter above support: 400 mm Spindle bore: 58 mm MACHINE DETAILS Dcodpfxj Ad Hcze Ak Aep Manufacturer: Heidenreich und Harbeck Type: Hanseat Machine type: Lead and feed screw lathe Length: 8,000 mm Width: 1,000 mm Height: 1,600 mm Weight: 2,000 kg EQUIPMENT Tailstock Multifix tool holder Three-jaw chuck, diameter 240 mm

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: Dodoxdmgvepfx Ak Aocp CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS TURNING PERFORMANCE Maximum height over bed: 300 mm Turning diameter over bed: 600 mm Maximum height over tailstock: 200 mm Turning diameter over tailstock: 400 mm SPINDLE Spindle bore: approx. 38 mm MACHINE DETAILS GENERAL Manufacturer: WEISSER HEILBRONN Model: Hektor Machine type: Lead and feed screw lathe Lot number: 143 DIMENSIONS AND WEIGHT Length: 4,000 mm Dcsdo Ad Hdxjpfx Ak Asp Width: 2,000 mm Height: 1,600 mm Weight: 4,000 kg

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 147342, turning length: 514 mm, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Swinging diameter: max. 525 mm Turning diameter: max. 350 mm Turning length: max. 514 mm Bar diameter: max. 51 mm Spindle speed: 35–5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Dedpfx Aks Afw Rrs Ajcp Spindle nose: A2-6 Spindle bore: 61 mm Tool stations: 12 X-axis travel: 190 mm Z-axis travel: 535 mm MACHINE DETAILS Weight: 5,650 kg EQUIPMENT 12-position tool turret

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Dcjde Ad Hgtjpfx Ak Ajp TECHNICAL DETAILS GENERAL Manufacturer: VDF Boehringer Type: V800 Year of manufacture: 1974 Machine type: Lead and draw spindle lathe WORKING AREA Turning length: approx. 1,200 mm Center height above bed: 430 mm Turning diameter above bed: 660 mm Center height above carriage: 260 mm Turning diameter above carriage: 520 mm SPINDLE Spindle speed: 7.1–1,400 min⁻¹ Spindle bore: approx. 140 mm MACHINE DETAILS Dimensions (L × W × H): 4,000 × 2,000 × 1,800 mm Weight: 5,000 kg EQUIPMENT Multifix tool holder 3-jaw chuck, diameter 600 mm

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Tool Holder Tool holder: VDI 40 Tailstock Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Dsdpez Uql Ajfx Ak Aocp Transport: possible on a standard truck EQUIPMENT Workshop cabinet Large quantity of VDI 40 tool holders Coolant system Loading system

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 5,000 rpm, bar diameter (max.): 52 mm, counter spindle speed (max.): 4,500 rpm, TECHNICAL DETAILS Main spindle Bar diameter: max. 52 mm Main spindle speed: max. 5,000 rpm Main spindle power: up to 20 kW C-axis: available Counter spindle Counter spindle speed: max. 4,500 rpm Counter spindle clamping diameter: max. 42 mm Tool turret and tool drive Turret 1: 8 tool stations Turret 2: 6 tool stations Linear tool carrier: max. 6 tools Speed of driven tools: max. 6,000 rpm Tool drive power: 3.3 kW Rapid traverse: up to 24 m/min MACHINE DETAILS Coolant tank: 210 l Hydraulic pressure: 90 bar Dimensions & Weight Machine height: 1,750 mm Footprint: approx. 2.4 m² Machine weight: approx. 2,500 kg Dodpfs Afwtzsx Ak Aocp EQUIPMENT Synchronous/counter spindle Driven tools Bar loader up to Ø 52 mm Chip conveyor Workpiece removal via conveyor belt