Used Facing And Centering Machine for sale (72,269)

Condition: good (used), Year of construction: 2021, functionality: fully functional, 2 pallets 15,000 rpm spindle 21 bar through-spindle coolant 4th continuous axis 30-tool magazine Air blower through the spindle Machine available early May 2026 Machine has 8,800 hours Cpodpfx Afoymxp Nstow

Condition: good (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control Cedpfx Afoyqxdbotepw • NC rotary table for 4-side machining 1250 mm x 1250 mm • Horizontal spindle HSK100 • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling • Full enclosure • Large interference circle 2300 mm • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010

Condition: excellent (used), workpiece diameter 60 mm grinding depth 30 mm Cpodpfx Afsunt Egstsw clamping length 1000 mm weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Cpedpfx Afjyn Emdetew Kopf- und Drehtisch: 1600 x 1450 mm

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Csdpfx Afop I Hanotspw

Condition: used, Year of construction: 2015, Twin-spindle machining center – 4 axes Travels x/y/z = 400 x 500 x 425 mm 2 x swivel axes Csdpfxjycqp Hj Aftepw Tool magazine: 2 x 36 positions Tool holder: HSK 63 Spindle speed up to 17,500 rpm Siemens 840D Chip conveyor Coolant system

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, X-axis 1,500 mm Y-axis 660 mm Z-axis 600 mm Table size 1,680 x 660 mm Spindle speed 12,000 rpm Tool holder SK40 Tool changer 24 positions Control ULTIMAX 4 Incl. 4th axis Kitagawa MR 200 (rotary axis + tailstock) Incl. chip conveyor Cpedpfxexm Tufs Aftsw Incl. internal coolant (IKZ)

Condition: good (used), Year of construction: 2017, 4 axes Travel: X = 730 mm, Y = 730 mm, Z = 880 mm Tool holder: HSK-A63 Pallet changer / shuttle table Number of tool stations: 40 Cedpfsyn Drxex Aftspw

Condition: excellent (used), TECHNICAL DETAILS CNC Control: FANUC Series 31i-A5S X axis (mm): 500 Y axis (mm): 350 Z axis (mm): 510 B axis (mm): +160 to -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø350 Table load capacity (kg): 300 Cutting feed rate X,Y,Z (mm/min): 50,000 / 50,000 / 40,000 Maximum rapid traverse X, Y, Z (m/min): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Tool changer type: Chain Tool magazine capacity: 120 positions Max. tool diameter (mm): 90 Max. tool diameter with adjacent positions empty (mm): 125 Max. tool length (mm): 300 Max. tool weight (kg): 8 Coolant tank capacity (l): 750 Through-spindle coolant (bar): Yes EQUIPMENT Cpodpfjym Rt Tox Aftow Rotary table with digital readouts: Included Work light: Included Through-spindle coolant system Hydrajet WP10-1000: Included Electronic handwheel integrated into CNC panel: Included Coolant oil separator: Included MACHINE DIMENSIONS Length (mm): 2,339 Width (mm): 3,820 Height (mm): 3,250 Weight (kg): 9,400

Condition: used, Year of construction: 2001, x-travel 550 mm Cedpfxoynnu Ds Aftepw y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, CNC Vertical Machining Center “BRIDGEPORT VMC 800” With Heidenhain TNC 410 path control Year of manufacture: 2000 Travel ranges: X 800 Y 500 Z 500 Spindle speed range: 0 – 10,000 rpm, stepless With the following accessories: Fixed angle table 1000 mm x 500 mm clamping surface Vertical tool changer with 20 tool magazine slots (SK 40) Cedpfxsypb Rhe Aftepw Fully enclosed safety cabin with sliding doors and internal lighting Various SK 40 tool holders Electronic handwheel Coolant system with reinforced 20 bar pump Chip conveyor Operating manual

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price - guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distances Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Cpedsyn Nvvepfx Aftew Rapid traverse Z axis: 30 m/min Work table Length: 1,150 mm Width: 490 mm MACHINE DETAILS Control system: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D probe Note: The machine vices mounted on the work table and the tool holders, including the tools installed in the tool magazine and spindle, are not included in the scope of sale and delivery. The oil mist extractor, which may be visible in the photos, is also not included in the scope of sale and delivery.

Condition: used, FANUC ROBODRILL ALPHA T14i B is a Vertical machining center engineered for high precision, strong accuracy and reliability. Table 550×380 mm; travels X500 Y400 Z330 mm; vertical distance 150–450 mm. Spindle 100–12,000 t/min (stepless), feed 1–15,000 mm/min, rapid 48 m/min; spindle motor 5.5 kW; 3×400 V; total power 9 kVA; weight ≈2100 kg; size 1600×2000×2200 mm. Tool magazine 14 stations; 4th-axis divider Peiseler; oil-mist extractor Elbaron. Achieves tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Cjdpeyn Rdbofx Aftspw

Condition: excellent (used), SCHAUBLIN 51 5AX CNC is a 5-axis machining center designed for precision, high accuracy and reliability. Working capacities: X300 Y400 Z430 mm; rotary table Ø210 mm; table load V50 H75 kg; A +30/−120°, C360°. Specs: HSK‑A63, 0–20,000 rpm, spindle motor 23 kW, feed 12,000 mm/min, rapid 30 m/min; weight ≈5750 kg; size 2700×1800×2600 mm. Tool magazine 20 places, Ø 80 mm (95 mm free), length 250 mm, tool change 3 s. Accessories: coolant system, water cooler, oil mist extractor FX4000, rinsing gun. Achieves tight tolerances; sectors: watchmaking, aerospace, medical, automotive, machine tools. Cpjdpfx Afoyn N Rgotsw

Year of construction: 2002, condition: ready for operation (used), Machining center Hurco VM 1 spindle speed max. 8000 rpm traverse path: X: 660mm Y: 406mm Z: 508mm Cjdpfx Afji E Iacjtepw spindle 2000 hours complete software options DXF tapping without chuck all tools are included , Hilma Schraustock drawer shcrank with tools

Condition: excellent (used), Year of construction: 2015, Traverses XYZ: 1020 x 540 x 510mm, table size 1200 x 540mm, ISO40 spindle taper, spindle speed 12000 rpm, Siemens 828D Control, spindle motor power 15kW, Csdpfxoylbpvo Aftopw 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t Cpsdpsxp Rywsfx Aftow dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 2009, x-travel 1016 mm y-travel 660 mm Cpodpjwvl Acefx Aftew z-travel 635 mm control Haas table surface area 1.372 x 610 mm table load 1.814 kg rapid traverse 18 m/min turning speed range 7.500 U/min power capacity - milling spindle 22,4 kW tool taper SK 50 | no. of tools in the magazine 30 Stück weight of the machine ca. 7,5 t dimensions 3,5 x 2,47 x 2,98 m Vertical Machining Center with 4th axis - 4th axis HRT 210 A with tailstock - chipconveyor - external handwheel - Dual tool change arm - internal coolant - filter - oil dust collector - prepared for cableless 3D touch probe Renishaw

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC machining centre DECKEL MAHO DMC 835V Year of manufacture: 2007 Control: Siemens 840D 4th axis (rotary table) controlled incl. touch probe Technical data: Tool holder: HSK63 Cedpfx Aeyn Rfreftepw Tool changer with 30 positions X-axis: 835 mm Y-axis: 510 mm Z-axis: 510 mm

Condition: used, Year of construction: 2002, machine/vehicle number: 88821-5, Travel paths (X/Y): 600x450 mm, 90-position tool changer HSK-E40, 42-position electrode holder changer EROWA ITS, 7-position pallet changer PAROTEC, 1 cooling unit LAHNTECHNIK BL 040-116, year of manufacture: 2008, 1 graphite extraction unit EXTOR 3500-3S MP. The machine displays an error message when the spindle is started, therefore it is being sold as defective. Cpsdsyn Nhxopfx Aftew

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. Cjdeyq Ez Tepfx Aftjpw The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool change positions: 22 Number of suction traverses: 10 Cpodpfxoyqzrne Aftow Milling unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Gluing unit Tool magazine Grooving unit Number of positions in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety net Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods before collection and shall be responsible for the installation, securing, and use of the machine at the place of destination. External reference: 8011

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! Codpfxsyn Nwtj Aftspw TECHNICAL DETAILS Travel distance X: 1,000 mm Travel distance Y: 500 mm Travel distance Z: 500 mm Table dimensions: 1,150 x 490 mm Number of tool positions in the magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg Operating Hours Automatic operation: 8,523 h Control on-time: 71,860 h EQUIPMENT Technical documentation Spare parts (as shown in the pictures) Note: Only a 7.5t truck can turn around on the company premises. It is recommended to send a smaller truck for collection.

Year of construction: 2021, operating hours: 9,159 h, condition: used, machine/vehicle number: 374-19, the documentation is attached as a PDF Cpsdpsyn Ni Nofx Aftsw

Year of construction: 2021, operating hours: 16,807 h, condition: used, machine/vehicle number: 374-20, the documentation is attached as a PDF Cpjdpeyn Nkaefx Aftjw