Used Fbc Chopper for sale (113)

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE Lodjzk Nitepfx Ahasah 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, functionality: fully functional, Year of construction: 2015, machine/vehicle number: 75E-E188, USED SHRED-TECH DUAL SHAFT 80HP (TWIN 40) SHREDDER MODEL ST-75ES MANUFACUTRED 2015 TWIN 40 HP MOTORS DUTTING CHAMBER OF 956mm/37" X 635mm/25" DISCHARGE HEIGHT 1,067mm/42" Laodexmthrjpfx Ahash THIS WAS USED IN A PLASTICS COMPANY TO SHRED PLASTICS, CARDBOARD AND LIGHT GUAGE METAL. IT IS IN VERY GOOD CONDITION, PURCHASED DUE TO A PLANT CLOSURE. IT IS CURRENTLY LOCATED IN OUR WISCONSIN WAREHOUSE.

Condition: like new (used), Miwe FBC baking oven for 60x40, condition as new -with hood and fan -10-deck oven requires 19.7 kW -6-deck oven requires 9.3 kW -with steam condenser including exhaust hood -with automatic cleaning -door lock with PIN -with loading trolley Lsdexywm Sjpfx Ahajah -400/230V 3/N/PE 50 Hz -external dimensions: 90x127x210 cm (WxDxH)

Condition: used, Year of construction: 2018, operating hours: 7,293 h, total height: 9,500 mm, total length: 34,500 mm, total width: 14,550 mm, Production year: 2018 Model: 10HM Drake Number of operating hours: 7293 h Minimum space requirements: 34500mm x 14550mm x 9500mm Electric motor power (Siemens): 550 kW Working shaft width: 1000 mm Configuration: 10 hammers, 3-2-3-2 arrangement (weight per hammer: 105-117 kg) Capacity: 14 tons/hour Magnetic separator (steel) – 2 units Eddy current separator (non-ferrous metals) Drum screen Spare parts: Lodpfezmul Ejx Ahaoah Flap, 3 sets of hammers, pins, conveyor belts, sensors, 6 screens, gearboxes If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 2010, condition: good (used), functionality: unexamined, For sale: straw shredding line. The line consists of: - horizontal feeder, - inclined feeder, - chopper with housing, - individual bag filter. Line capacity: approx. 5 t/h Length of horizontal feed table: 7.6 m Drive motor power of horizontal feed table: 1.5 kW Length of inclined feed table: 12.5 m Drive motor power of inclined feed table: 1.5 kW Ledpjwttp Sofx Ahajah Shredder dimensions: Height: 8.2 m Length: 5.2 m Width: 3.8 m Power: 2 x 132 kW Each shredder is equipped with an individual bag filter. For more photos and details, please contact us. Machines can be viewed in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 2,500 h, power: 3.5 kW (4.76 HP), input voltage: 400 V, type of input current: AC, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 250 mm, number of axes: 3, number of slots in tool magazine: 9, controller manufacturer: VHF, actuation type: electric, total height: 2,200 mm, total length: 3,500 mm, total width: 2,200 mm, overall weight: 1,000 kg, table length: 3,000 mm, table width: 1,500 mm, Equipment: CE marking, documentation/manual, VHF CAM 1530 PREMIUM – High-precision CNC gantry milling machine with extensive premium features For sale is a high-quality, virtually new VHF CAM 1530 Premium CNC gantry milling machine. The machine impresses with its high precision, robust industrial design, and extensive features. It is ideally suited for the professional machining of plastics, aluminum, and other non-ferrous metals, wood, and composite materials. Thanks to the automatic tool changer, the precise Jäger high-frequency spindle, and the powerful vacuum table, the system offers excellent conditions for efficient and demanding production tasks. The machine is offered as a comprehensively equipped complete package including control system, software, and numerous accessories. Reason for sale As part of the continuous development of our company and the associated realignment of our production, we are investing in a larger CNC system with expanded machining capabilities. For this reason, we are selling our VHF CAM 1530 Premium. Technical highlights * High precision: Repeatability of ± 0.01 mm * Generous travel ranges: X = 3,050 mm, Y = 1,550 mm, Z = 290 mm * Automatic 9-position tool changer including tool length measurement * Jäger high-performance spindle with up to 40,000 rpm * Three-zone vacuum table with separately activatable areas * Backlash-free ball screw drives on all axes * Dual linear guides and double Y-axis drive * Maximum feed rate of 10,000 mm/min * Automatic tool length measurement and Z-axis zero point determination * Extraction system and air cooling, expandable to minimum quantity lubrication * Suitable for contour machining, engraving, and 2.5D and 3D milling operations Equipped with a powerful, liquid-cooled high-frequency spindle from Jäger: Type: Chopper 2300-40 K S5A * Rated speed: 40,000 rpm * Peak power (Pmax/5s): 3.5 kW * Continuous power (S1): 2.3 kW * Hybrid ball bearing * Runout and flatness each below 2 µm * Pneumatic tool change * Tool holder WK19 * Protection class IP54 Software and control The system features a comprehensive software package: * CNC Term – control software * Rhinoceros 6 Commercial – professional 3D CAD modeling software * Cenon CAM – CAM software on a separately integrated Apple computer in the control tower Lodpfez Rz Hcox Ahaeah This provides a wide range of options for design, work preparation, and CNC machining. Extensive accessory package The offered complete package includes, among other things: * Haimer Zero Master – professional 3D edge probe * Handwheel control * Three-zone vacuum table (3,000 × 1,250 mm) with vacuum pump * Two pneumatically switchable clamping jaws * Automatic tool changer * 10 tool holders WK19 * 15 collets in various diameters * Various milling and drilling tools * Uninterruptible power supply (Schrack UPS USSEP100) An attractive opportunity for professional users With the VHF CAM 1530 Premium, you acquire a high-quality CNC gantry milling machine that combines precision, flexibility, and extensive automation functions in a single system. Particularly interesting for manufacturing companies, plastics processors, model makers, advertising technicians, and companies looking to expand their CNC production economically.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees Lasdpfjzgu Igex Ahash chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: used, Slitting line McKay 60''x0.625''x100,000Lb Lodpjlwtzyefx Ahajah Make: McKay Material Thickness: .065″ – .625″ Maximum Material Width: 66″ Weight Capacity: 100,000Lb Coil ID: 24″ – 30″ Exit ID: 30″ Coil OD: 90″ Maximum Speed: 450 fpm Direction: L-R Pit Type Entry Coil Car Double Mandrel Uncoiler with Hold-Down Roll Hydraulic Peeler Driven Pinch Rolls Coil Flattener with 200HP Drive Slitting Head with 16″ Arbor Diameter 250HP Drive Knives & Tooling Two (2) Scrap Choppers Recoiler with Over-Arm Separator 250HP DC Drive Exit Pit Type Coil Car Electrics, Hydraulics Controls, Tooling

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The 2023 Nilma Speedy Cutter is a reliable piece of equipment designed for efficient slicing and dicing in various food processing environments. This used model retains its robust functionality, making it a cost-effective choice for kitchens seeking high performance without the expense of brand-new machinery. Laodpfx Aeztxy Tshaoh Engineered with precision, the Speedy Cutter offers consistent and uniform results, catering to a range of fruits, vegetables, and other ingredients. Its intuitive controls and easy-to-clean components ensure smooth operation and maintenance, optimizing productivity. Built to Nilma’s high standards, the Speedy Cutter embodies durability and practicality. This cutter is an excellent choice for anyone in need of dependable equipment that can significantly enhance food preparation processes.

Condition: ready for operation (used), Year of construction: 2007, Shredder for plastic 45kw power , can chop foil and other plastic into small chunks , we used for bubble foil and polyethylene foam, and LDPE foil. Ljdpoxf Txzjfx Ahaoah The shredder has also soft start box.

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Laedpfez A H Sajx Ahaeh

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Machine is without gearbox. Laedeyt Iawjpfx Ahaoh

Condition: good (used), functionality: fully functional, We are selling a mobile auger chipper type HP50 from the manufacturer Sasmo/Laimet. It is powered by an 8-cylinder Scania diesel engine. The machine has a tracked chassis. The chipper can chip trunks up to a diameter of 60 cm. Laodjt Id Ixepfx Ahajh

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0509, overall weight: 1,200 kg, number of blades: 28, rotor width: 630 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Main engine power: 18.5 kW Rotor width: 630 mm Number of axles: 1 Number of rotating blades: 28 Screen perforation: 20 mm Hydraulic slide: Yes Opening width: 810 mm Opening length: 630 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,660 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT Laodpfx Aez Nip Ashaoh Hydraulic slide CE marking

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, power: 45 kW (61.18 HP), overall weight: 4,700 kg, color: grey, Maximum chipping height: mm 200 Feed-in width: mm 650 Feed rollers: units 3 Rotor fly circle: mm 600 Chip length approx.: mm 20–30 Output capacity: 18–22 cubic meters/hour of wood chips Chipping knives: units 2 Feed motors: kW 2 x 3 Net weight approx.: kg 4700 Feed: horizontal Lajdpoynzg Hefx Ahaeh Machine frame: steel, gas-shielded welded Rotor: steel, gas-shielded welded, dynamically balanced Bearings: oversize roller bearings Bearing housing: steel, flange housing Feed rollers: steel, special toothed Chip discharge: located below the machine Machine grate: (sieve) for post-shredding of oversized pieces Drive pulley: matched to main motor, N = 1500 rpm Hydraulic system: comprising hydraulic pump, diaphragm accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Condition: good (used), functionality: fully functional, Year of construction: 2001, working width: 1,650 mm, overall weight: 8,000 kg, rear tire size: 15/55-17, 48 cubic meters, 6 rakes, hydraulic drawbar, 7 blades. Lsdpfezrzd Sex Ahajah

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Seydelmann AE-130-3B automatic bowl chopper with infeed system for 200L mixing containers. Sold on behalf of a customer; functional machine, no warranty, no returns. Laodpfozmih Iex Ahaeh

Condition: like new (used), functionality: fully functional, Year of construction: 2015, operating hours: 30 h, overall weight: 2,450 kg, total height: 2,400 mm, total length: 2,000 mm, total width: 1,700 mm, The machine consists of two parts a raw grinder and a fine grinder. It is used for grinding electronic mainboards, cable waste and plastic waste to 20x20 mm, while the fine grinder grinds them to 5x5 mm pieces. Lsdpfx Aezrvq Hohaoah The grinding unit is kept close by a hydraulic cylinder, opening is necessary during maintenance only. Grinding is carried out between fixed and rotary blades with adjustable gap. Motor: asynchronic.

Condition: used, Industrial shredder chopper This industrial shredder / bead chopper is a simple, robust, and versatile solution designed for the efficient volume reduction of your metallic waste, such as: - Metal scraps - Continuous welding beads - Other compatible metallic waste for industrial recycling. Its power allows it to shred, chop, and fragment various types of industrial waste, facilitating their compaction, waste management, and preparation for industrial recycling. SPECIFICATIONS Shredding: Designed to handle constant flows of metallic waste, optimizing your recovery and recycling operations. Blade access opening: A wide opening of 402 x 502 mm to facilitate the feeding of various materials. Ledpfx Asymaiqshasah Blade configuration: Equipped with 1 blade shaft of 25 mm width, designed for effective and uniform chopping. Shaft rotational speed: Operates at 35 r.p.m., offering an optimal balance between shredding power and efficiency. Voltage: Prepared for standard 400/50 Volt/Hz connections. Weight: At 500 kg, this is a solid and durable machine, built for intensive industrial use. Blade access opening: 402 x 502 mm Number of blade shafts: 1 unit Blade width: 25 mm Shaft rotational speed: 35 r.p.m. Voltage: 400/50 Volt/Hz Weight: 500 kg

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,685 h, maximum speed: 80 km/h, overall weight: 11,500 kg, total height: 2,500 mm, total length: 9,720 mm, total width: 2,300 mm, mobility: mobile, machine/vehicle number: 11520, For sale is this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were replaced just a few operating hours ago. Some spare flails are still available and will be included in the sale. All 8 V-belts were also replaced just a few operating hours ago. Both NOx sensors as well as AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not road-legal. Throughput: 60-100 m³/h depending on material and feeder equipment Recommended max. log diameter: 200 mm Machine No.: 11520 Ledpfxjy Hi D Sj Ahajah Max. revolutions per minute: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer’s Description: FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated “HFG (Husmann forestry equipment)”, achieve a uniform, fine, and clean shredding result thanks to their special beating technology and flail arrangement. The shredded material is fed via a spacious intake hopper with forged steel chain conveyor to the infeed roller and onward to the flail rotor. The pendulum-mounted infeed roller is guided by rack-and-pinion and driven hydraulically by a large reduction gearbox. Adaptable to the material being fed, the roller can also be operated and lifted by remote control. The roller or feed aperture of 460 mm ensures smooth and fast feeding. The robust rotor, made from high-grade steel (1000 kg), reinforced with additional bracing and mature construction techniques, is break-proof even when processing heavy foreign materials. Sixty free-swinging flails are arranged in offset positions on eight hardened flail shafts. The quick-change system allows the carbide-tipped flail tips to be bolted on to the flail holders. With the large number of 50 mm wide flails and the rotor’s direction of rotation across a breaker bar towards the infeed belt, the shredding material is optimally fragmented and made compostable. The load-dependent and continuously adjustable feeding speed of the scraper floor and infeed roller allows further influence and improvement of the output product quality. The rotor trough and discharge area design allows for windrow heights up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, making operation and maintenance simple. Clear controls and safety features such as rotor overload protection and a reversing device are quality hallmarks of our plant. The mobile shredding unit is equipped with an 80 km/h running gear and air brakes, and can be configured either stationary or with a hooklift frame. The HFG IV is a composting machine for organic and inorganic waste, suitable for mechanical feeding." If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2006, operating hours: 9,800 h, We offer this used Bonfiglioli Drake 2000 hammermill shredder, manufactured in 2006. Maximum power of the main motor: 400 kW Rated voltage: 400/690 V Frequency: 50 Hz Includes: Hammermill, double magnetic separation system for ferrous metals, Gauss separator for non-ferrous metals, aspiration system, conveyors, and electrical cabinet. If you have any further questions or require additional information, please send us a message or call. Lodpfozc I S Eox Ahaoah

Condition: good (used), functionality: fully functional, Year of construction: 2007, 9000 seedlings, large pick-up attachment, rotary feeder, netting tie. Lajdozr D Rbjpfx Ahash

Condition: good (used), Year of construction: 2017, operating hours: 12,000 h, Single-shaft shredder with pusher floor Rotor diameter: 500 mm Rotor width: 1300 mm 87 knives on the rotor Knife size: 40 x 40 mm Motor: 75 kW with hydraulic pusher floor: 7.5 kW Laedpfxezbzuwo Ahaeh Screen with 20 mm and 30 mm openings Hopper capacity: 14 cubic meters with discharge conveyor belt, approx. 3 m long Total weight: approx. 10 tons

Condition: excellent (used), functionality: fully functional, overall weight: 12,000 kg, For sale: 2 units of Untha RS 100. 1. 2 x 55 kW. 2. 2 x 75 kW. Ljdpfxez Dw Syj Ahaoah The machines have been serviced. They are fully functional. Equipment: Perforated screen. Electrical cabinet. Base. More technical information and pricing available upon request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, For PTO drive (200-450 hp). Equipped with a loading crane and a telescopic tipper body (hopper, 25 m³). Ledozz Ryuepfx Ahaoah