Used Fbc Chopper for sale (103)

Condition: used, Comprehensively tested and refurbished, used Morton-Lödige model FKM600 stainless steel jacketed ploughshare type mixer. Rsdpfsyanxtex Aglen Manufacturer: Morton Material: Stainless steel External Jacket: Stainless steel rated 5.5 Bar design pressure at 162 deg.c. Capacity: Approximately 150-450 litre working capacity, 600 litre total capacity (product dependent) Discharge Type: Bottom bomb door style with pneumatically operated door. Type Of Blades: Stainless steel shaft with Becker-shovel type blades Motor: 22kW motor with gearbox Also includes: Provision for (2) side entry choppers. (Not fitted).

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Rodsydc A Iepfx Agljn Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Available immediately Benefits: + Special rotor with reduced knife protrusion, suitable for hard and soft materials + 22 kW motor + Efficient square knives *For pallets: up to a maximum of 10 pallets per hour *Rate depends on screen size and material. Significantly higher throughput with smaller wood residues. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or according to agreement (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be changed Suction connection Ø 200 mm Feed opening: 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: plant color may differ Weight: 1920 kg Standard scope of delivery includes: - Control cabinet with PLC control - Automatic star-delta start - High-speed hydraulics - Auto shut-off when rotor is idle - Speed 70–90 rpm for high throughput - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher Redpfx Aox Af Rdeglen - Vibration-damping machine feet - CE compliant The following options are available at an additional cost: - Increase shredder height by 30 cm (preparation for conveyor belt) + €2,480 net - Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synced with shredder) - Enlarged hopper attachment 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Feed must be free from metals and mineral contaminants. Tool damage and/or increased wear may result otherwise.

Condition: used, Comprehensively tested, used stainless steel Aeromatic Fielder model GP1 VP mixer / granulator. Manufacturer: Aeromatic Material: Stainless Steel Capacity: 10 litres Rsdjx Tib Rjpfx Aglon Type of Blades: Bottom entry 3-blade mixer with drive, and a side entry chopper. Also includes: Jacketed removeable bowl and local controls. Various inserts to reduce bowl capacity. Unit is mounted on mobile base.

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Rsdpox D Ryysfx Aglon Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: used, functionality: fully functional, Year of construction: 1992, Shredder Make: Piranha For wood, plastics and cables Motor: 37 kW Shaft length: 600 mm With 3 x 5 cutting knives With 40 mm screen With control panel Rsdpfx Aeyf Uh Esglon Dimensions (L/W/H): 2.5 x 2.5 x 2.6 m Weight approx. 4.5 t

Condition: good (used), Brake module, brake unit, brake chopper, brake control module, brake rectifier -Manufacturer: SEW Eurodrive, brake control module -Type: BMV5.0 -Input: 24V DC -Quantity: 1x brake module available -Dimensions: 75/25/H95 mm Rjdpsx T Ay Hefx Aglon -Weight: 0.2 kg

Condition: used, Year of construction: 1993, Manufacturer : Glatt Model : VG-25 Year : 1993 Type: Universal high shear granulator / mixer Capacity : 25 Litres Useful capacity: 5 - 18 Litres Empty weight: 450 Kg Compressed air: 6 - 10 bar Double jacket: yes Water pressure: 2 - 6 bar Main mixer: 30 - 600 rpm Power : 5,5 KW Rsdpfx Agjx S R H Eelen Chopper: 300 - 3000 rpm Power : 1,5 KW Variable speed drive: electric x2 Liquid spraying : Watson Marlow peristaltic pump Discharge valve: Manual Mobile chassis: 4 wheels Video :

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 483, Casemaker, Automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Co-Pilot with touchscreen, Automatic case counter, Board magazine for manual loading, Centre strip infeed (flexible), Waste chopper, Cloth feeder, Glue unit, Preheated glue tube, Viscosity control, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Tacking delivery. Rjdpfx Agox Ryr Ielsn

Condition: used, Manufacturer: WAM Model: WBH550 Rodpjx R D Imefx Aglen Type: Ploughshare mixer Total volume: 550L Capacity: 155 - 385 L Material: stainless steel Main motor power: 9.2 kW ATEX tulip-shaped chopper: 3 kW Bearing seal: air purge Filter support Bag emptying hopper Drain valve: pneumatic Secondary drain valve: manual Electrical cabinet with speed variation Dismantled platform available with equipment including: mixer support, platform, and stairs.

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter Redpex R D Efjfx Aglon D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1997, Manufacturer : Aeromatic TK Fielder (GEA) Model: Pharma Matrix 150 Year : 1997   Type : Granulator / high speed mixer Application : Granulation Sector : Pharmaceutical / Chemical / Cosmetics   Material : stainless steel Redpfx Ajx R Dbmogljn Tank volume : 150 L Jacket : 2 bars / 80°C max Main agitation : 130 - 260 rpm Power : 11 KW Variable speed drive: electric Chopper / granulation: 1500 / 3000 rpm CIP self-cleaning: seals and tank GMP: Good manufacturing practice : safety / contamination CASTELL safety key Discharge valve: pneumatic Bag filter Primary sealing: inflatable seal Secondary seal: compressed air purge Compressed air: 6 bars Electrical cabinet Video available in operation Digital documentation

Condition: new, functionality: fully functional, Year of construction: 2023, operating hours: 4 h, power: 45 kW (61.18 HP), Rotor lenght 1000 mm, knives 40 x 40 mm, 2 stator knives, kW 45+ 2.2, Weight approx 5000 kG, Hoppersize 1400 x 1000 mm, screensize on your request. PLC, automatic reverse as well by manual, connections for convayors, and included motor cover, etc, etc Optional Conveyor beld available This machine is plug and play and have Dutch CE certificat Conveyor or other infeed or discharge methods can be discussed. Any other wish you have, do not hessitate to ask. Redpfx Agjkzg U Dslsn For more info: RSS Recycling Shredders & Solutions Contacts or questions with companyname, telephone number and your name. Without these we are not able to reply your request

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife 2 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete Rjdpfsvwlxhex Agljn -Transport dimensions: 370/230/H40 mm -Weight: 2.8 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, Rodpfx Agovwlzijljn -Manufacturer: Holac, cutter knife -Type: 29-0228-0/1 -Hole: Square 26 x 26 mm -Quantity: 1x knife. available -Dimensions: 540/350/H65 mm -Weight: 4.4 kg

Condition: used, Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm Redeb Hiylopfx Agljn -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. Rodjq Untropfx Agljn -Power: 75 Ohm/250W -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm -Weight: 0.3 kg

Condition: good (used), Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc. Rsdpfxjh Rn U To Aglen

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper Rodsnch Ixspfx Agljn -Manufacturer: SEW Eurodrive, braking resistor type BW100-005 -Item no.: 826 269 1. -Power: R=100ohm P=500W -Dimensions: 255/160/H60 mm -Weight: 1.1 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter Redsvwll Ijpfx Agljn -Manufacturer: Knecht, cutter knives 4 pieces -Type: R320 5 220 428 92 -Price/Delivery: complete -Dimensions: 330/300/H80 mm -Total weight: 5.6 kg

Condition: good (used), Cutter knife, cutter knife for chop choppers, chop cutter, dicing cutter, multi-purpose cutter, slicer and portion cutter -Manufacturer: Knecht, cutter knife -Type: R350 5 220V 0.R 230 92 -Quantity: 1 knife available -Dimensions: 390/230/H20 mm Rodpfxjvwlvao Aglon -Weight: 1.7 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slicer and portion cutter Redpfx Asvwlk Doglen -Manufacturer: Knecht, cutter knife 1 set / 3 pieces -Type: R320.5-09971 -Quantity: 2 sets of 3 available -Price: per set -Dimensions: 330/300/H70 mm -Total weight: 4.7 kg

Condition: good (used), Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB6032-G -Input: G 325 V DC -Output: G 375V DC 8.0A -Number: 2 modules available -Price: per piece Rjdpfx Ageltrfislon -Dimensions: 215/150/H90 mm -Weight: 0.4 kg/pc.

Condition: good (used), Year of construction: 2012, Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2 -Type: EMB9352-E -Input: DC 725V Imax = 25A -Output: Pav= 19 kW Ppk = 32 kW -Quantity: 1x brake module available -Dimensions: 55/380/H185 mm Redpfoi Sdgyjx Aglsn -Weight: 2.3 kg

Condition: good (used), Cutter knife, cutter knife for chop chopper, chop cutter, dicer, multi-purpose cutter, slice and portion cutter, cutter knife, cutter knife -Manufacturer: Knecht, cutter knives 4 pieces -Type: 05 R318 5 220 -Price/Delivery: complete Rjdpfx Agjvwlimelsn -Dimensions: 320/300/H100 mm -Weight: 5.4 kg