Used Felder Bf 6 41 for sale (107)

Condition: like new (used), Year of construction: 2021, For sale is an almost new Felder thickness planer D9-51 with a planing height of up to 254 mm. The machine is on display in our showroom and is therefore in like-new condition. Technical data: - Planing width: 510 mm Lodpfxsxxi Rtj Ab Torh - 4-knife cutterhead system - Thicknessing height: 3-254 mm - Thickness table length: 900 mm - Max. stock removal: 8 mm - Electrically adjustable thicknessing table with LED Power Drive display - Infinitely variable feed speed from 4-16 m/min - 7.5 HP (5.5 kW) motor - Star-delta starter - Exhibition machine, like new - Year of manufacture: 2021 The planer is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale!

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor Lrodsxrahcspfx Ab Tjh External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Ljdpfexl Dw Usx Ab Tsrh Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: used, functionality: fully functional, filter area: 50 m², noise level: 75 dB, extraction nozzle diameter: 300 mm, nominal flow rate: 5,090 m³/h, Technical data Max. airflow 6000 m3/h Nominal airflow 20 m/s 5090 m3/h Nominal pressure 20 m/s At extraction speed 2680 Pa Extraction connection Ø 300 mm Lrodpsx H Stijfx Ab Toh Cartridge filter - Filter surface 50 m2 Noise level 75 dB Chip container 2x250 l - With cartridge filter - With chip remover - With JET cleaning

Condition: new, Year of construction: 2022, functionality: fully functional, noise level: 75 dB, total height: 2,285 mm, total length: 2,275 mm, total width: 1,150 mm, extraction nozzle diameter: 300 mm, space requirement height: 2,985 mm, space requirement length: 2,640 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Modern, bright, clean design Great and efficient performance Chipboard storage Cartridge filter JET cleaning Year of manufacture: 2022 Lrsdjx H Srrepfx Ab Teh

Condition: excellent (used), Year of construction: 2010, 4 kW motor Lodsul Utmspfx Ab Tsrh 4 knives Table length 198 cm Table width 41 cm

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Lrsdpfx Absvf D S Aj Toh Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm Lrjdpjxlr U Iefx Ab Toh - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet Ljdpexzu Nmsfx Ab Torh FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: excellent (used), Year of construction: 2017, Format circular saw Kappa 550 e-motion (Formatkreissäge) - 10 kW, 3 speeds: 3000/4000/5000 rpm - Year of manufacture: 2017 - Scorer operational display - Crosscut fence 3200 mm, swivels 90°–45°, 2 fence jaws - Extension table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Position-controlled rip fence with digital readout in the operator panel at eye level, cutting width 1250 mm - Overhead guard: hood for 90° cuts and for angled cuts, height-adjustable and pivotable out of the working area - e-motion control: 15" color touchscreen, operator panel at eye level, USB interface and prepared for network connection, adjustable and pivotable out of the working area - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and tilt adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg - Scorer operational display Lsdpjw Tfahefx Ab Torh - Total operating hours: 443.47 h - Comes with many almost new saw blades and groove cutter blade

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Lrjdpfx Absxycy Rj Tsh Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: Ljdpfx Abjxd Aito Torh - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Ledjxdkw Espfx Ab Torh Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Lodpfsw Hfd Isx Ab Terh Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Lrsdpfew Hcygex Ab Tjh Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: CA.03.013.12, operating hours: 1,555 h, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Lrodpfx Ajng H Uvjb Tjh Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: good (used), Year of construction: 2023, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 155 mm, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, height adjustment type: electric, rotational speed (max.): 5,500 rpm, rotational speed (min.): 3,500 rpm, cutting length (max.): 3,700 mm, cutting width at rip fence: 1,250 mm, main saw diameter: 450 mm, pivoting range: 45 °, sliding table length: 3,700 mm, table length: 3,700 mm, Equipment: motor brake, scorer, Newly used Felder K945S sliding table saw with 3,700 mm roller table, well equipped and in working order! 3,700 mm X-roll roller table Ledpfx Abowath Ue Tsrh Remote control on/off switch Digital readout window, cutting width up to 1,250 mm PowerDrive K2 pack for height and angle adjustment Scoring unit, electric height adjustment 7.5 hp, up to 450 mm saw blade Scoring unit with its own motor, 120 mm blade diameter Narrow and wide hood Swivels up to 45 (45.3) degrees Immediately available from stock.

Condition: used, Year of construction: 2013, machine/vehicle number: 320.03.003.13, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash CAD, H10 CNC Control, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, overall weight: 3,800 kg, controller model: H10 CNC Control, Windows 10, torque: 4 Nm, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 11 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 180 mm, tool length: 300 mm, tool weight: 1,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Lrjdpew Tkm Tefx Ab Teh Year of manufacture: 2013 Motor voltage: 3x 400 V Motor frequency: 50 Hz Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510

Condition: ready for operation (used), Year of construction: 2002, Brand: Felder Modell: FS2200 Year of manufacture: 2002 With sanding shoe in good condition Lsdpfxeth R Tle Ab Terh Driven left and right Tech. info: Work table size: 2200x800 mm Wheel diameter: 250 mm Band width: 150 mm Belt length: 6200 mm Chip nozzle: 160 mm Motor: 4 kW, 50 Hz, 380V, 3-phase Size for transport: 320x110x145 cm Stock no: 2002056

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW Lsdpexbq Uljfx Ab Tsrh 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Lrjdjxrwn Tspfx Ab Tsh Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 11 kW (14.96 HP), volume flow: 8,000 m³/h, nominal flow rate: 6,950 m³/h, negative pressure: 2,630 Pa, H 3 "GS dust-tested" Extraction connection 350 mm Ø Pneumatic JET filter cleaning Ledpfx Aewty Uzsb Torh Extinguishing system with powder extinguisher With rotary air lock

Condition: used, Albatros Numerical Control with TPA CAD Software Working range on X-axis mm 3260 Working range on Y axis mm 1200 Working range in Z-axis N ° 2 work fields Bar worktop No. 6 electronically adjustable bars by C.N. Line laser for virtual 0 position in Y direction N° 4 pneumatic Bakelite bars for lifting the panel No. 3 electronically adjustable suction cups by C.N. for each bar with vacuum seal for fixing the panel during processing No. 1 vertical electrospindle with C-axis, with automatic tool changer with No. 10 positions, Hsk type cones Automatic tool change system with 12 positions - positioned on the machine side Drilling head with 17 spindles arranged as follows: - No. 8 verticals on X axis - N° 5 verticals in Y axis - No. 2 horizontal on X axis - N° 2 horizontal in Y axis No. 2 blade groups for making grooves on the X and Y axes Front protection and safety system with carpets Automatic lubrication system (Air conditioning system for cooling and cleaning of machine control) Vacuum pump mc/h 250 Ledpfevph Hxex Ab Torh

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Lodjwi Uftjpfx Ab Terh Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: ready for operation (used), Year of construction: 2016, Felder clean air extraction unit | Dust extraction system RL 200 | Ø 200 mm Maximum flow rate: 4000 m³/h Nominal flow rate: 20 m/sec, 2300 m³/h Valve pressure: 2380 Pa Filter area: 20 m² Extraction connection diameter: 200 mm Residual dust content: < 0.1 mg/m³ Felder Briquetting Press FBP 50 Briquette diameter: 50 mm Throughput: 30–50 kg/h Motor power: 4 kW Dimensions (L x W): 1750 x 1270 mm Weight: 950 kg Hydraulic oil capacity: 125 liters Year of manufacture: 2016 Condition: Ready for use Lrsdswa Rlkepfx Ab Tsh Price: €15,500 The system has already been dismantled and is stored in the Raasdorf warehouse.