Used Felder Bf6-31 for sale (118)

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Godpfoyzdnbjx Acieiu Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: good (used), Code: 0404 Brand: HAMMER - FELDER GROUP Model: A3 - 31 - CE Standard 2-works combined machine (Surface Planer/Thickness planer ) for joinery, furniture, joinery fittings, custom-made furniture, plastic and various – CE Standard Technical specifications: Planer width 310 mm Table length 1400 mm Tilting guide 90-45° Three-phase motor v. 380 4 Hp Planer shaft with 3 knives Max chip removal 4 mm Thickness table width 306 mm Thickness table length 540 mm Gjdpfx Acszcqmfoisiu Min workpiece length 145 mm Thickness feed speed 6 mt/min Suction inlet diameter 120 mm Overall dimensions mm 1450 x 600 x 1000 h Weight kg 290

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Gsdpfexlt Shox Acieiu Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm Gijdpfxew Hcygj Aciou - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, MACHINING CAPABILITIES: - Height (thickness) of useful Z-axis travel: 225 mm - Length of useful X-axis milling travel: 3860 mm - Width of useful Y-axis milling travel: 1930 mm - Work area: X = 3090 mm Y = 1530 mm Z = 85 mm, depending on the clamping system, see machine technical diagrams. - Maximum travel speeds: X-axis: 25 m/min Y-axis: 25 m/min Z-axis: 15 m/min MACHINE COMPOSITION: - Vacuum table with grooved length x width: mm Grid pattern with 30 x 30 mm grid spacing Matrix table with fine grid, axis dimensions 30x30 mm (instead of 60x60 mm grid) - 2 Vacuum pumps 250 m3/h - Chip evacuation mat - X-axis movement via pinion and rack, Y & Z-axis movements via screw and sleeves (high-quality precision linear guides with automatic lubrication) • Milling/routing unit 10 kW - Tool holder connection type: HSK F63 - Variable speed 1000–24,000 RPM, controlled by a frequency converter Rotation direction: right/left The routing spindle is connected to the Z-axis mounting plate via linear guides and moves along 2 vertical linear guides. The tool clamping is done using an HSK F63 cone. Tool retention is controlled by 3 sensors. This ensures safe operation. The tool clamping cleaning is pneumatic. Drive: HF 3-phase motor controlled by a frequency converter Bearing: ceramic Spindle cooling: by air - Extraction hood around the perimeter - On-board tool magazine, 11 positions - Maximum tool diameter: 100 mm - Maximum tool height: 153 mm - Distance between clamping jaws: 110 mm Please consult the machine configuration for more information on specifications. • DH 16 4H 2S Drilling unit: Unit with 12 vertical heads and 4 horizontal heads; 2 slotting saws; 1 in the X direction and 1 in the Y direction Vertical drilling system with 12 spindles. 7 spindles in the X direction and 5 spindles in the Y direction. Independent operation of each spindle is possible. Continuous speed up to 6000 RPM, horizontal drilling system with 4 spindles. 1 double spindle in the X direction, 1 double spindle in the Y direction. • Control panel: - Windows PC - Programs (Software): F4 Design, F4 Nest Giedpjzcvvrjfx Acisu OTHER FEATURES: - Total electrical supply: 400V. 3Ph.+N+T 50Hz IN 56-63 A - Installed power: 26kW - Pneumatic supply: 8 Bars - Average consumption: 350 Nl/min - Centralized extraction ports - CE standard marking Lockable disconnector switch, emergency stops

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage Giedpfxoxzppbj Acieu The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: used, Year of construction: 2022, total height: 2,400 mm, total length: 5,300 mm, total width: 2,350 mm, Colour: Grey Empty weight: 4.000 kg Price: On request - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 30B.11.040.22 - Number of milling spindles [pcs.]: 1 Gjdpfx Aex Tt Unjcijiu - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 4 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: WoodFlash - Safety feature: Safety light curtain - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: PICCHIO 2200 - └ Year of manufacture: 2022 - Tools included: Yes - CNC options: Manual control - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 3300 - Table width [mm]: 1280 - Working range X [mm]: 3300 - Working range Y [mm]: 1280 - Z-axis working range [mm]: 250 - X-axis maximum stroke [mm]: 4000 - Y-axis maximum stroke [mm]: 1670 - Z-axis maximum stroke [mm]: 500 - Voltage [V]: 400 - Current consumption [A]: 40 - Power [kW]: 18.0 - Installed length [mm]: 6250 - Installed width [mm]: 3494 - Installed height [mm]: 2300 - Transport dimensions: 5300mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, total height: 1,600 mm, total length: 3,250 mm, total width: 1,000 mm, Colour: Grey Weight: 1.250 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 7 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes Gisdpfxsyu Thce Aciou - Voltage [V]: 400 - Current consumption [A]: 18.6 - Fuse [A]: 25 - Power [kW]: 7.2 - Transport dimensions: 3250mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), FELDER AD941 Planer-Thicknesser – used Co-opening planer tables, Giodpfxezcfp Us Aciju Table opening to the rear, Electric height adjustment, Digital display for planing thickness, Dust-proof ----- Technical data ----- Planing width: 410 mm, Table length: 2,200 mm, Max. chip removal: 5 mm, Diameter of planing shaft: 86 mm, Number of knives: 4 pieces, Swivel range of planing fence: 90-45°, Passage height: 245 mm, Min. workpiece thickness: 3 mm, Feed speed: 6 and 12 m/min, Dust extraction port: 120 mm, Motor power: 5.5 kW, Weight: 610 kg Quality information: - Planer tables adjusted - Infeed and outfeed rollers checked and adjusted - Table guides checked / readjusted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Ready for immediate use

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit Gedpfjw I H Rkox Acieiu With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Gijdpfx Asrubg Hjciou

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical data: - Milling unit, spindle height adjustable with handwheel, 0 - 125 mm - Milling spindle swivel up to 45° via handwheel - Degree indicator for swivel with digital display - Dovetail and T-slot table Z Gsdpfx Ajzb Sadjcioiu - Anodized table, length 1000 mm - Milling stop 240 - Milling stop rails 450, anodized aluminum - with 3-roller feed mechanism Availability: short notice Location: 63934 Flörsheim

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Giodpfx Aszcqxujcieu Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Giedsxg Igiepfx Acisu

Condition: excellent (used), Year of construction: 2014, Motor power: 7.5 HP (5.5 kW) Motor voltage: 400 V (50Hz) Planing width: 410 mm Planing shaft: 4-blade field system planing shaft No. of planing knives: 4 Planer table length: 2,200 mm Planer fence: 1,300 x 170 mm Chip removal: 5 mm Suction connection: 120 mm Weight: 510 kg Dressing guard EURO Standard Standard equipment - Planing shaft with 410 mm planing width - Infeed planer table with table length 1080 mm Giedpjh Hp Hyjfx Acisu - Jointer fence with ruler 1300 x 170 mm - EURO Standard planer guard - 4-blade field system planing shaft Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2001, Felder slot mortising machine FD-250 Motor power: 2.2 kW Year of manufacture: 2001 Height adjustment via handwheel Lever operation 2 manual clamps Gedpfx Aceyvv Ngeisiu Includes several slot mortising cutters Location: ex stock 54634 Bitburg - immediately available -

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: Gijdoyq Sztopfx Aciou X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested Gedpfxoy Sazrs Acisiu ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: used, Year of construction: 2016, Sliding carriage, 3200 mm cutting width, 1250 mm, controlled parallel fence, kappa 400 X, pivoting saw unit, 45°, saw blade diameter: 250 - 400 mm, maximum cutting height 135 mm, electric height adjustment and pivoting, motor 5.5 kW, 3 speeds, 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional function: easy-lock quick-change system, main saw blade, pivoting crosscut fence with digital display for length and angle. Location: Nattheim. Gjdpoy H Hftefx Acieiu

Condition: excellent (used), Year of construction: 2023, For sale is a used Felder RL-140 automatic clean air extraction unit with a maximum air flow rate of 2500 m³/h. The extraction unit has been inspected and refurbished by our service team and is in very good condition. Technical data: - Max. air flow rate 2500 m³/h - H3 dust-tested - Automatic filter cleaning - 10 m³ filter area - Extraction port diameter 140 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Godjza Dz Repfx Acisiu Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-T03VW

Condition: used, Year of construction: 2018, total length: 3,250 mm, total width: 1,000 mm, total height: 1,100 mm, Colour: Grey Weight: 650 kg - Year: 2018 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 441.12.292.18 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 137 - Parallel stop displacement [mm]: 1300 - Roller table length [mm]: 3200 Gedpsy Tmi Esfx Acisiu - Table width [mm]: 1300 - Max. saw blade diameter [mm]: 400 - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Controlled axes: Rip fence, Cutting height, Tiltable, Scoring unit height - Manually adjustable axes: Rip fence, Cutting height, Tiltable, Scoring unit height - Options: Scoring unit - └ Spindle speed pre-cutter [rpm]: 8200 - └ Pre-cutter saw blade diameter [mm]: 120 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Schuinstelbare zaagaggregaat: - └ Min. tilt adjustable [°]: 0 - └ Max. adjustable [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 11 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 3250mm x 1000mm x 1100mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), For sale is a used Felder F-900 Z milling machine with a dovetail and T-slot table length of 1300 mm. The machine is used as an exhibition model in our showroom and is therefore in like-new condition. Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling fence for tools up to Ø 230 mm Gjdpfxjw Hfd Io Acioiu - Multi-adjustment system - Dovetail and T-slot table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" - Motor power 7.3 kW / 9.9 hp, soft start - Year of manufacture 2025 The machine is located in A-8561 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Year of manufacture: 2022 11 kW motor 350 mm pipe connection Filter area: 71 m² Dimensions: 270 x 120 x 230 cm Weight: 850 kg Gedpfszcgbxox Acisiu Chip capacity: 2 x 250 liters Nominal flow rate: 6920 ccm/h Mobile Pneumatic filter cleaning Dry extinguishing system

Condition: used, Year of construction: 2015, We are selling a Felder Perfect 710, complete with two additional cauldrons. Everything is in working order and ready for immediate use. Included: Gjdpjzc Ikhsfx Acisiu Felder Perfect 710 2 additional cauldrons Please contact me for viewing, further information, or pictures.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 605.11.013.18, functionality: fully functional, For sale: a Felder Format 4 Kappa 400 panel saw. This is a panel saw designed for professional carpenters. It features a high-power motor and a scoring blade. Precise cuts are possible thanks to the smoothly operating X-Roll table. The saw has a 7.35 kW motor. It was purchased in 2018 for a small, family-owned carpentry shop. It has been used by a single carpenter since its purchase. It is regularly serviced and has no defects. All of its functions are in working order. I will include a set of saw blades with the saw. Gisdpfx Aezb Rumeciou I will not issue an invoice for the machine. A standard purchase agreement applies.