Used Felder Kf 700 S for sale (153)

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h Pedpfjzv Tmmjx Af Asra - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Predjy Agp Depfx Af Aoa Technical Data Dimensions [mm]: 1660 x 1020 Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.-

Condition: used, functionality: fully functional, Felder FS900K edge sanding machine Predpfxozu Il Ij Af Asa Sanding belt width: 150 mm Sanding belt length: 2200 mm Sanding belt oscillation Motor power: 3 kW

Condition: as good as new (ex-display), functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, Equipment: scorer, Demonstration machine with few operating hours, equipped with 5 special features; 5.5 kW, pre-ripper with its own motor, fine-adjustable circular saw fence, cutting width 800 mm with full table length, angle grid on the outrigger frame... Predpszi Dclefx Af Aoa Format sliding table, cutting length 2050 mm. Recommended retail price: 7,423,- EUR, plus VAT. Save 2,223 EUR!

Condition: like new (used), For sale is a used Felder K-540S panel saw with a cutting length of 3200 mm. The machine was only used for a short period and has been inspected and refurbished by our service team. Technical specifications: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 140 mm - Max. saw blade diameter 400 mm - Height-adjustable + tilting - Incl. protractor scale - Motor power 5.5 kW / 7.5 hp - Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Panel, circular saw, panel saw, Felder Prsdjzil Ebspfx Af Asa Reference: R-L0B9N

Condition: used, Felder KF700S/03 panel saw-milling machine, year of manufacture 2006, good condition, including folding device for feed and tenon hood, 5.5 kW S6, 3200 mm panel table length, 3500,6500,8000,10,000 rpm, 780 kg Prices subject to change, errors, printing and typesetting errors reserved Pedpswzzh Ssfx Af Ajra

Condition: new, Year of construction: 2024, For sale is a new Felder panel saw K540S with a cutting height of up to 140 mm. The machine is an exhibition unit in our showroom and is therefore as new (full warranty). Technical data: - Cutting height: 140 mm - Saw blade diameter: 300–400 mm - Motor: 5.5 kW / 7.5 HP - X-Roll sliding table, cutting length: 2800 mm - Rip fence cutting width: 800 mm - Outrigger table: 1300 mm - Crosscut fence on outrigger: 2600 mm - 'Easy-Glide' tilt segment guide - CE-compliant overhead guard - 3x 400 V / 50 Hz The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Podpfsy R N Apsx Af Asra Related terms: panel saw, sliding table saw, circular saw, table saw, woodworking machine, Felder Reference: R-A0117

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Prices subject to change, errors, printing and typesetting errors reserved Prjdpfjvrvluex Af Aea

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Prjdpfx Aezwt Ndsf Asa Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Pedpfx Asvw Ectsf Aera Prices subject to change, errors, printing and typesetting errors reserved

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. Prsdpfxszv Rcrj Af Aea TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Predpfxew Hckro Af Aoa Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 2,500 m³/h, intake vacuum (max.): 22 mbar, intake manifold diameter: 140 mm, filter area: 10 m², total height: 1,940 mm, total length: 1,040 mm, total width: 898 mm, overall weight: 210 kg, Equipment: CE marking, For sale is a used Felder clean air extraction unit RL 140, manufactured in 2023. This compact and powerful extraction system ensures clean air conditions in the workshop and is ideally suited for use with panel saws, planers, milling machines, and other woodworking machines. Thanks to the H3-certified clean air system, a residual dust content of less than 0.1 mg/m³ is achieved. The unit is in good condition and is ready for immediate use. The fan wheel, which is located on the clean air side, prevents dust from escaping and ensures a high level of operational safety. Equipment: • Clean air extraction system with H3 certification • Manual filter shaker • Large 200-liter chip container • Compact design • High extraction performance with minimal space requirements • Ideal for professional woodworking shops Prjdpfxjzwmxxs Af Aja • Nominal air flow rate: 1,108 m³/h • Residual dust content: < 0.1 mg/m³ (H3 certified)

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Pedjywfbuspfx Af Ajra Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Pjdpfx Asw Hcygof Ajra Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: used, Year of construction: 2021, functionality: fully functional, Extraction ducting, purchased on March 24, 2021, for the wood workshop extraction system. Piping/ducting system for connecting multiple woodworking machines to a central or decentralized extraction system. Total length of ducting (approximate dimensions): 300 mm pipe diameter → approx. 20 m 250 mm pipe diameter → 1.5 m + approx. 7 m hose 200 mm pipe diameter → approx. 2 m 160 mm pipe diameter → approx. 18 m 140 mm pipe diameter → approx. 1.5 m 120 mm pipe diameter → approx. 5 m 100 mm pipe diameter → approx. 6 m Extraction flaps: Pjdpezuyz Iofx Af Asra 300 mm → 1x 250 mm → 1x 160 mm → 4x 140 mm → 1x 120 mm → 2x 100 mm → 2x Key technical data: - Machine type: Extraction ducting / piping system for chip and dust extraction - Application area: Connection of woodworking machines, extraction points, and extraction system - Function: Collection and removal of wood chips and dust from the workshop - System components: Pipes, elbows, branches, dampers, brackets, and connecting pieces - Material / design: Workshop ducting for stationary extraction technology - Use: Connection of multiple machines such as saws, planers, milling machines, and sanding machines - Advantage: supports a clean, safe, and efficient workshop operation - Particularly interesting in combination with an extraction system or for workshops under construction/renovation - Relevant accessory package for multiple stationary machines - Useful addition for woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa Pjdpszvh Dyjfx Af Aera • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Dust extraction connection: 2 x 120 mm Podpfow Axi Asx Af Aora Feed rate: continuously variable 2.5-10 m/min Standard equipment Maintenance interval display Plain text error messages Constant infeed height – fixed table, 900 mm Electric height adjustment including fine adjustment from the control panel Feed rate continuously variable from 2.5-10 m/min, adjustable via inverter from the control panel Endless belt conveyor Automatic feed belt centering 1st brush unit with selectable steel brush, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm Dimensions: 1455 x 1070 x 1250 mm Required air pressure: 6 bar Optional equipment 022 7.5 hp (5.5 kW) motor power for 1st unit 024 7.5 hp (5.5 kW) motor power for 2nd unit 027 Oscillation control for 1st and 2nd brush unit

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, PRICE INCLUDES TRANSPORT We offer this very good FORMAT4 PROFIT H200 13.33 machining center. Psdpfxoy Dcvve Af Aera The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2021, functionality: fully functional, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, transverse, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of saw unit: 0°–46° - Cutting width: approx. 1000 / 1250 / 1600 mm, depending on the model - Cutting length: approx. 2200–3700 mm, depending on the model - Speeds: 3000 / 4000 / 5000 rpm, optionally continuously variable 2000–6000 rpm Prsdezuywiepfx Af Asa - Motor power: approx. 7.5 kW, optionally higher depending on the configuration - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and dimensionally accurate furniture / interior design work - Core machine for professional woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Prjdpfoxzu Nmex Af Aja Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: used, Year of construction: 2021, functionality: fully functional, Format4 Dual 51 planer and thicknesser from Felder, purchased on April 29, 2021, for precise planing and thicknessing of solid wood. Powerful combination machine for professional woodworking shops. Key technical data: - Machine type: Planer and thicknesser - Model: Format4 Dual 51 - Planing width: approx. 510 mm - Thicknessing width: approx. 504 mm - Thicknessing height: approx. 3–254 mm - Planing table length: approx. 2250 mm - Max. chip removal: approx. 8 mm Pjdpfx Ajzulhtef Ajra - Feed rate: Vario-Feed approx. 4–16 m/min - Cutterhead: approx. 120 mm diameter, Silent-Power spiral cutterhead also possible depending on the configuration - Motor power: approx. 5.5 kW, optionally higher depending on the configuration - Combined design saves space compared to two separate machines - Central base machine for solid wood processing, furniture making and interior design - Attractive for carpentry shops, workshops and training companies No guarantee

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device Predpfxsyq Sztj Af Asa - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm Pedpeww Hhvsfx Af Asra - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine Psdjzwnmqopfx Af Ajra • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm