Used Feutron Climate Chamber for sale (6,464)

Condition: excellent (used), Here we offer a Feutron climate test cell. Feutron climate test cell Temperature Temperature range: -40...90°C Climatic range (without heat load) 10...85°C Temperature difference,temporal during temperature operation ≤ ± 0.5 K/min. Temperature difference,temporal at climatic operation ± 1,0... ± 1.5 K/min Rate of change Heating 2.0 on average K/min Cooling 2,0 in average K/min The IEC 1646 standard can be realized with testing, solar modules with max. 160kg weight and non-linear ramps. (setpoint step change) can be realized Drying Air drying Condensation drying Humidity Humidification of air Steam humidification Humidity range 10... 95 % r.h. Humidity difference,temporal ≤ ± 3,0... ±5.0 %r.H. Dew point range 8... 80,9 °C Test room Test room volume 7.0m³ Dimensions Test room dimensions width 1500 mm x height 2250 mm x depth 2000 mm Revolving door DIN right heated,i,l.. width 900 mm x height 2100 mm Viewing window, heated with darkening flap and lockable Width 500 mm x height 600 mm Feed-through opening 2x in front side right ∅ 75 mm Irradiation unit test room Cut-out 4x in side panel left for SC 2500 850 x 700 mm each Area to be irradiated when using SC 2500 1200 x 1200 mm Intensity of radiation at 1.0 m distance from wall 1000 ± 10% W/m² Lighting 1xhalogen lamp 200W Refrigeration system Bitzer compressor semi-hermetic 2-stage,air-cooled Condenser: split condenser (outdoor installation winter control) Refrigerant R507 /R23 Temperature control system Cooling brine medium Tyfocor / water Mixing ratio 50/50 Density of cooling brine 1,072 kg/dm³ Filling quantity approx. 80dm³ Pyranometer Temperature range -40... 150°C Max. Radiation absorption 4000 W/m² Spectral range (50% points) 305... 2800nm Sensitivity (norminal) 7 µV/W/m² Power supply Test cell Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type fixed connection Max. simultaneous power requirement approx. 32.0 kW Supply line fuse 3 x 63, Char C (A) Power supply SolarConstant Electrical mains connection 400V, 3/N/PE, AC, 50Hz Connection type Max. simultaneous power requirement approx. 30.0 kW Supply line fuse 3 x 63, Char C (A) Outer dimensions of the test cell complete with: Genset room/switch cabinet and control cabinet for SolarConstant 2500 Outer dimensions of aggregate room width 3440 mm x height 2580 mm x depth 2950 mm /switch cabinet width 2200 mm x height 1830 mm x depth 1100 mm Outer dimensions of condenser, split width 900 mm x height 950 mm x depth 2000 mm Mass of test cell, total approx. 2700 kg Mass of condenser, empty 153 kg Weight : 2700 Kg Type: 3707/06 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you. Lsdpfxoklv H Ie Afzorg

Condition: excellent (used), Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters Dimensions Test chamber outside: width 1540 mm x height 2090 mm x depth 1240 mm Fan motor and door removed: Width 1540 mm x height 1940 mm x depth 925 mm Test chamber: Width 720 mm x height 690 mm x depth 560 mm Door, clear width: width 720 mm x height 690 mm Viewing window, heated: width 500 mm x height 600 mm Installation dimensions of the temperature test chamber with open doors Width 2340 mm x height 2090 mm x depth 2165 mm Feed-through opening 2 side panels, left ∅ 100 mm Lrodpfx Asqxavasfzjg Temperature range -70°C to +180°C Heating: 3.0 K /min Cooling: 3.0 K /min Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 635 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Feutron temperature test chamber Here we offer a temperature test chamber. Feutron temperature test chamber air-cooled Nominal test chamber volume: 280 liters dimensions Test chamber outside: 1500 x 2040 x 1075 mm Fan motor and door dismantled: 1500 x 1940 x 925 mm Test chamber: 720 x 690 x 560 mm Door, clear width: 720 x 690 mm Viewing window, heated: 500 x 600 mm Temperature range -70°C to +180°C Heating: 4.0 K /min Cooling: 0.6 K /min Lodpfx Ajk Scxmsfzerg Mains connection: 400 V 3/N/PE, AC, 50 Hz Max. power requirement: 6.3 kW Weight: 600 kg Type: 3416/17 Refrigerant: R507 / R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Feutron TPK 3403/15 Lrodpfof E N Sxjx Afzsg Temperature test chamber -40 to +100°C

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Ljdpfjvlpctex Afzerg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Year of construction: 2021, condition: excellent (used), Weiss Type: TempEvent T/340/40/3/S Air-cooled temperature test chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture: 2021 Description – Function & Application: For sale is a professional temperature test chamber: Weiss Technik TempEvent T/340/40/3/S. This unit is designed for the targeted heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and research & development to test the temperature behavior, functional reliability, and durability of products. Typical fields of application: - Temperature and function tests of lithium batteries and accumulators - Testing of electronics, assemblies, and components - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculating air system for uniform temperature distribution inside the chamber. Operation is via an integrated touch control panel with program and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX/tertiary explosion protection) is not specified. Suitability for specific tests—especially battery or safety testing— is the responsibility of the operator. The unit has been tested, serviced, and is fully functional. Technical data (excerpt) Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Key data for temperature tests: - Temperature range: -40°C to +180°C - Temperature change rate, cooling: 4.0 K/min - Temperature change rate, heating: 3.2 K/min - Cooling: air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical data: - Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Equipment: - Stainless steel interior - Recirculating air fan for homogeneous temperature distribution - Reinforced safety door with inspection window - Touch control panel - Status signal lamp Dimensions & weight (approx.): - Test chamber internal dimensions: Height 750 mm x Width 580 mm x Depth 450 mm - Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, please note the following information! Lsdpfeycvd Nex Afzsrg The following checks are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data! Specifications are subject to confirmation.) If you have any further questions, we will be happy to assist you by phone.

Year of construction: 2021, condition: excellent (used), Weiss Model: TempEvent T/340/40/3/S Air-Cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C, Year of manufacture: 2021 Description – Function & Applications: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. The system is designed for targeted heating and cooling of test specimens under reproducible conditions. It is used in industrial, laboratory, and development environments to test the temperature behavior, functional safety, and durability of products. Typical application areas: - Temperature and functional testing of lithium batteries and accumulators Lsdpfeycvdiex Afzjrg - Testing of electronics, assemblies, and components - Quality, endurance, and stress tests - Research and industrial quality assurance The chamber operates air-cooled and is equipped with a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber features a reinforced safety door with observation window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests—particularly battery or safety testing—is the responsibility of the operator. The unit has been inspected, maintained, and is fully functional. Technical Data (excerpt) Manufacturer: Weiss Technik Model: TempEvent T/340/40/3/S Year: 2021 Temperature: - Test temperature range: -40°C to +180°C - Cooling rate: 4.0 K/min - Heating rate: 3.2 K/min - Cooling method: Air-cooled - Refrigerant: R449A (approx. 2.5 kg) Electrical Data: - Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated current: 12.5 A / Rated power: 4.1 kW Features: - Stainless steel internal chamber - Recirculation fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): - Test chamber interior: Height 750 mm x Width 580 mm x Depth 450 mm - Exterior dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm - Test chamber volume: approx. 335 liters - Refrigerants: R449A & R23 - Weight: approx. 470 kg For your safety as a buyer, the following procedures are carried out on all chambers we offer: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, all chambers undergo a documented test run Condition: Used Scope of delivery: (see photos) (Subject to technical changes and errors. All specifications are non-binding!) We are happy to answer further questions by phone.

Condition: used, tank capacity: 1,800 l, GENERAL Design: rectangular Remarks: Double-chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); each chamber has a manway, diameter approx. 415 mm; each chamber has 1 outlet (1 x internal pipe diameter approx. 35 mm, 1 x internal pipe diameter approx. 38 mm); 2 welded reinforcements made of V2A in one of the chambers (see photos) Total width: 2,080 mm Total height: 1,500 mm Total length: 1,100 mm Location: Bremen Lrsdpfjyck Tfsx Afzjg Volume: 1,800 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Previous application: Food products TANK Mounting: Feet Number of feet: 4 pieces EQUIPMENT Manway / Dome: on the tank MATERIAL CHARACTERISTICS Outer surface: marbled Feet material: stainless steel

Condition: used, tank capacity: 3,000 l, GENERAL Design: rectangular Remarks: 2-chamber tank (1 x approx. 2000 liters, 1 x approx. 1000 liters); internal height approx. 1000 mm; opening chamber 1: approx. 1,260 x 1,330 mm, opening chamber 2: approx. 1,260 x 750 mm; side walls slightly curved outwards Total width: 2,430 mm Total height: 1,650 mm Total length: 1,650 mm Top: open Location: Bremen Volume: 3,000 liters Product-contacting material: V2A 1.4301 (AISI 304) Ljdpfx Asyck Ngjfzjrg Condition: used Last application: water tank for agricultural use TANK Base: height-adjustable legs Number of legs: 4 EQUIPMENT Outlet: 50 mm MATERIAL CHARACTERISTICS Outer surface: marbled Legs material: stainless steel

Condition: used, tank capacity: 44,480 l, GENERAL Equipment: Lifting lugs Design: Vertical Remarks: Double-chamber storage tank divided into two 22,240 litre tanks; total height according to drawing, cylindrical height for each 22,240 litre tank according to drawing Internal diameter: 3,200 mm Total height: 7,380 mm Max. overpressure: 1.0 bar Location: 6250 Kundl, Austria Technical documentation: Drawings, various documents Nameplate: Vacuum: 0.25 bar Volume: 44,480 litres Cylinder wall thickness: 6 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Lrjdpjyci Unofx Afzeg Cylindrical height: 1,930 mm TANK Max. permissible operating temperature: 100°C Ends: Dished heads Support type: Legs Number of legs: 4 pcs EQUIPMENT Manhole / Access port: in the top head (DN 600) Outlet: Flange DN100 TECHNICAL DATA / DIMENSIONS Bottom head wall thickness: 10 mm Top head wall thickness: 6 mm

Condition: used, Year of construction: 1996, Overview  This chamber pasteurizer was manufactured in 1996 by German company JOHA (Johannes Arno Hartenstein). According to available documentation, the machine was acquired in 2021 as a unit described as overhauled and partially renewed, and the control system was renewed in 2020. The machine is immediately available and can be viewed in person. Technical data  Type: Chamber pasteurizer Heating: Steam Capacity / Content: Total chamber volume: approx. 10.3 m³ Net usable volume: approx. 5,850 L Electrical connection: 230 / 400 V, 50 Hz Installed power: approx. 5.2 kW Current: approx. 10.5 A Fuse: 3 × 35 A (slow-blow) Protection class: IP54 Steam connection: DN 80 Condensate connection: DN 50 Max. steam pressure: approx. 0.2 bar Steam consumption: approx. 300 kg/h Noise level: < 70 dB(A)   Ljdpsyb Subofx Afzerg

Condition: used, machine/vehicle number: W1T9630201044xxxx, mileage: 105,000 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21583 Specifications: 2021 model EU-approved until 06.01.2026 Km: approx. 105,000 (will increase) Wheelbase: 430/135 cm 6x2 428 hp 2020 Joab Anaconda superstructure Engine brake Full air suspension HIAB S-HiPro 130 crane Remote control Tires (see pictures) Extra lights Automatic transmission Camera mirrors Radio/DAB Available from December 1st Description:2021 Mercedes Actros 2543 6x2 single-chamber compactor truck with Joab Anaconda body.Equipped with HIAB S-HiPro 130 crane.Mileage will increase as the truck is in daily use.See video.The vehicle will not be available before December 1st. Km: 105000 HK: 428 Technical approved: Yes EU-approved until: 06.01.2027 Lsdpjx S Ur Sefx Afzjrg Own weight: 17160 Total Weight: 27000 Payload: 9765 Width: 255 Length: 980 Euro: 6 Model: 2543 6x2 1 – kammers komprimatorbil m/ Joab Anaconda påbygg og kran

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Lrodpfjya Ev Nox Afzjg Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: used, machine/vehicle number: YV2XZ22C8HA80xxxx, mileage: 403,000 km, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21704 Specifications: Km: Approx. 403,000 Gearbox: Automatic Full air suspension 6x2 with steering on 3rd axle Engine brake Decent tires On-Spot Euro 6, 419 hp JOAB body 2 chambers Approx. 4 m³ for bio and 16.7 m³ rear Winch Bale clamp Reversing camera Botek scale and printer Radio/CD Climate/AC Service history from Volvo Ready for delivery Description:Volvo FM410 Refuse Truck from 2017.JOAB body with 2 chambers.Service history from Volvo.Ready for delivery. Km: 403000 HK: 418 Lodpfxoxt Dglj Afzjrg Technical approved: no EU-approved until: 30.11.2025 Own weight: 16800 Total Weight: 27000 Payload: 10125 Width: 255 Length: 980 Euro: 6 Model: FM410 2-Kammers Renovasjonsbil Gearbox: Automatic

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Lrjdpfjrt U Nuex Afzog Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Year of construction: 2010, condition: good (used), Very good solution to use one press for two different materials and You don't have any problems to sort them later. Capacity 20 m3. Ljdpfx Aegzuluefzerg 5,5 kW 400/32 A

Condition: used, machine/vehicle number: YV2J1F1C2AA69xxxx, mileage: 280,000 km, Year of construction: 2010, Please contact ATS Norway for more information Please provide reference number upon request: 20835 Specifications: Km: Approx. 280,000 Transmission: I-Shift Air suspension Euro 5, 419 hp Tires (see pictures) 6x2 with turn on 3 1 chamber NTM on construction Volume: 18.6 m clamp Winch Rotor beam Weight Printer Rear view camera Diesel heater Radio/CD Air conditioning/AC Bed Services are taken at local workshop Ready for delivery Description:Volvo FM410 1-chamber truck from 2010.The truck is equipped with NTM superstructure that takes 18.6 m.6x2 with 3 axle swing.Ready for delivery. Lrodpfx Ajwvzfasfzog Km: 280000 HK: 418 Technical approved: Yes EU-approved until: 17.09.2026 Own weight: 14565 Total Weight: 27000 Payload: 12360 Width: 255 Length: 920 Euro: 5 Model: FM410

Year of construction: 1990, condition: excellent (used), functionality: fully functional, Very well preserved drying chamber system with 2 x 5 individual chambers. Year of construction 1990 and 2000. 8 units made by Brunner and Hildebrand and 2 units WSAB. See photos for dimensions. Drying chambers can still be viewed in operation until the end of September. Easy to dismantle as completely bolted! Complete with Lignomat control system. Control cabinets and wiring. Lrsdpfxet H I R Ue Afzjg

Year of construction: 2002, condition: excellent (used), Severn Science Argon Vacuum Welding chamber, new in 2002, previously used in F1 motor racing facility. Lodpjrwnrgefx Afzerg With Edwards E2M 80 vacuum pump. Excellent condition, very rarely used.

Year of construction: 2007, condition: used, Industrial drying chamber Mühlböck Type OLSF2125-3110-1100-11-000C for controlled technical drying of sawn timber or for rapid drying of firewood. The system enables uniform, low-stress wood moisture reduction through precisely controlled climate and air management. Ideal for sawmills and industrial wood processing with high quality requirements. heating capacity: 260 kW Lrsdpfx Ajx Trqhefzjg Water temperature: 90 ° C Amount of water: 10 m³/h content: 86.6 m³ gross

Condition: good (used), Year of construction: 1988, Reaction vessel, batch system, solids separator, washing trough, painter's wash station, water treatment, tool and water cleaning, filter press, chamber filter press Lsdpohvfznjfx Afzorg -Manufacturer: Poligrat, chamber filter press type 470-20/2 -Model: 11 plates -Hydraulic cylinder: Stroke: 115 mm -Dimensions: 1315/920/H1720 mm -Weight: 580 kg

Condition: used, mileage: 71,000 km, power: 355 kW (482.67 HP), first registration: 08/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: green, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, DAF XF480 FT Low Deck Volume Tractor Unit ---- Nutzfahrzeuge Göppl GmbH - Authorized DAF Dealer ---- Used Vehicle Long Combination Vehicle (LCV) - Long HGV First Registration: 21.08.2024 Technical Inspection (TÜV): 08/2026 Safety Inspection (SP): 02/2027 Warranty: Plus: 3 years drivetrain – up to 500,000 km Financing: We are happy to arrange a competitive finance offer for you, subject to credit approval. Equipment: • Climate Package • Sleeper High Cab • Additional cab insulation • Roof spoiler • Side fenders • LED skylights • LED headlights and fog lights • Windshield with solar protection film • Roof hatch with electric operation • DAF Corner View • Dashboard design: Plateau • Driver’s seat: Luxury Air suspension • Passenger seat: Cinema style with fabric upholstery • Curtains with separating curtain Lrodoycz Ugspfx Afzog • Luggage compartment • Lower bunk with XtraComfort mattress • Refrigerator • Automatic climate control • Integrated stationary air conditioning system • DAF Infotainment Luxury Plus • DAF Connect • Turn assist • Adaptive cruise control with FCW and AEBS-3 • ECAS remote control with extended functions • Engine: MX-13, 355 kW / 483 hp – EURO 6 • ECO Performance • Automated 12-speed TraXon transmission • MX engine brake • Full air suspension: 8.0 + 13.0 t • Axle load monitoring • Wheelbase: 3.80 m • Tires: Goodyear – Front: 315/60R22.5 – Rear: 295/60R22.5 • Rear axle ratio: 2.05 • Mechanical differential lock • Aluminum fuel tanks: 690 + 525 liters • Fifth wheel: SAF S36-20, 150+12 mm • Fifth wheel setting: 770 mm • Chassis guard • Power supply connection • Analog-controlled PTO prewiring (cable harness prepped) • Alternator: 130A, Batteries: 2 x 210Ah AGM • Battery energy monitoring • Dust guard Optional: • Fire extinguisher boxes • OBU installation • Tachograph calibration • CB radio • Power inverter ---- Nutzfahrzeuge Göppl GmbH Weiden - Regensburg - Leupoldsgrün - Bamberg - Nuremberg Authorized DAF Dealer – DAF Service Partner – FIAT Professional Service Partner Errors and interim sale excepted Sale to business customers only.

Condition: used, mileage: 194,214 km, power: 100 kW (135.96 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,200 mm, first registration: 02/2022, fuel tank capacity: 70 l, CO₂ emissions: 211 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2022, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, sliding door, trailer coupling, General information Number of doors: 5 Model range: Jul 2020 - Mar 2024 Cab: single Technical information Torque: 330 Nm Number of cylinders: 4 Lrjdpfx Afjxdyx Eozsg Engine capacity: 1.950 cc Transmission: 9 gears, Automatic Measures length/height: L2H1 Dimensions (LxBxH): 514 x 193 x 198 cm Weights Empty weight: 2.018 kg Carrying capacity: 1.032 kg GVW: 3.050 kg Interior Interior: black Consumption Average fuel consumption: 7,3 l/100km (39 MPG) Maintenance, history and condition APK (MOT): tested until 02/2027 Number of keys: 2 (2 hand transmitters) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL

Year of construction: 2023, condition: as good as new (ex-display), functionality: fully functional, 2 units new in stock, new machine warranty, warehouse stock, original packaging, available immediately With safety system for solvent-based substances according to DIN 1539. Matching loading trolleys in stock (see image). Contact us for more information! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust air volume: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Inspection in our warehouse possible by appointment. Lodpfx Afel Dw T Aezsrg We offer new and used industrial ovens. Contact us for more information! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber furnace, curing oven, convection drying cabinet, convection oven, solvent oven, chamber dryer

Condition: used, Maurer - Smoke chamber for 2 trollies Electric heating 48 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: GOLIATH II Without after-burning system Installation dimensions of the machine in cm: Lsdpfx Afsh Tm Uzozorg Width: 158 Length: 250 Height: 250 Trolley dimensions in cm: 100*100*200 Delivery time: 30 working days after advanced payment