Used Fixed Bed Type Milling Machine for sale (90,537)

Condition: excellent (used), Year of construction: 2013, EMMEGI DIAMANT XL 7700 – CNC Profile Machining Center – 4 Axes – Year of Construction 2013 Manufacturer: EMMEGI S.p.A., Italy Model: DIAMANT XL 7700 Machine Type: CNC Profile Machining Center Year of Construction: 2013 Serial Number: C114811 Control System: CNC control system with 15-inch TFT color display Number of Axes: 4 CNC-controlled axes Technical Data Travel Distances and Axes * Number of CNC-controlled axes: 4 * Travel distance X-axis (longitudinal): 6,500 mm * Travel distance Y-axis (transverse): 1,095 mm * Travel distance Z-axis (vertical): 800 mm * Swivel range A-axis: 0° to 180°, continuous * Rapid traverse rate X-axis: 80 m/min * Rapid traverse rate Y and Z axes: 64 m/min * Rapid traverse rate A-axis: 10,000 °/min * Positioning accuracy over 1,000 mm: ±0.15 mm Milling Spindle and Tool Holder * Main spindle power S1: 7.5 kW * Maximum spindle speed: 20,000 rpm (HSK F63) * Up to 24,000 rpm with ISO 30 according to technical documentation * Tool holder: HSK F63 / ISO 30 depending on configuration * Tool magazine: 9 positions with HSK F63 or 10 positions with ISO 30 * Tool change time: under 16 seconds (HSK F63), under 18 seconds (ISO 30) Tool Dimensions * Maximum milling/drilling tool diameter: 63 mm * Maximum tool length: 168 mm * Disc milling cutter HSK F63: up to Ø 250 mm * Disc milling cutter ISO 30: up to Ø 180 mm Clamping System and Work Areas * 2 independent work areas on the X-axis * 6 clamping devices as standard * Optionally up to 12 clamping devices * Automatic positioning of the clamping devices * 2 stops in standard design * Optionally up to 4 stops Dedpfx Akj Af U Ais Ascp CNC Control and Software according to technical documentation * CNC configuration: Pentium 3, 1 GHz, 256 MB RAM * Display: 15-inch TFT color display * Keyboard * 2 COM interfaces * 2 USB interfaces * Network interface * Operating system according to documentation: Windows 2000 Professional * Software: CAM, Editor, Drill * CAMPUS software included according to documentation Electrical and General Data * Year of construction: 2013 * Voltage according to nameplate: 400 V, 3 phases, 50 Hz * Connected power according to nameplate: 25 kW * Rated current according to nameplate: 36 A * Weight according to nameplate: approx. 7,000 kg * Operating pressure, compressed air: 6 bar * Air consumption per cycle: 165 l/min Equipment Visible in the machine photos: * CNC control panel with screen and keyboard * Separate hand-held operating unit * Automatic clamping system with multiple profile clamps * Enclosed machining area with protective cladding * Long bed for profile machining * Emergency stop switch * Pneumatic connections

Condition: like new (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20,000 m/min, rapid traverse Y-axis: 20,000 m/min, rapid traverse Z-axis: 20,000 m/min, position of the milling head: 0.001, spindle speed (max.): 4,000 rpm, table width: 1,500 mm, table load: 10,000 kg, table length: 1,500 mm, type of input current: three-phase, workpiece weight (max.): 10,000 kg, overall weight: 26,000 kg, input voltage: 400 V, CNC MILLING MACHINE LAGUN GORATU GTM 3 (TYPE T) TECHNICAL SPECIFICATIONS Brand: Lagun (Goratu) Model: GTM 3 Year: 2016 Dsdpfxjy T Sffe Ak Ascp CNC: Heidenhain iTNC 530 Table: 1500 x 1500 mm X: 3000 mm Y: 1200 mm Z: 1500 mm V (Column cross travel: 1000 mm Automatic micrometer head - ISO 50 Head speed: 4,000 rpm Micrometer rotary table (capacity 10 tons) Internal coolant system: 40 Bar Head power: 28/34.5 Kw Chip filter ZF Gearbox PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEARING MACHINE, FOLDING MACHINE)

Year of construction: 1975, condition: ready for operation (used), travel distance X-axis: 8,000 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,150 mm, overall weight: 20,000 kg, spindle motor power: 11,000 W, number of axes: 3, General Data Machine weight 20000 kg Main Drive Number of axis 3 Spindle motor power 11 kW Tool taper ISO 50 Movement X-Axis Movement 8000 mm Z-Axis Movement 1150 mm Y-Axis Movement 950 mm This 3-axis Butler CS10 Bed Type Milling Machine was manufactured in 1975. It features a large 10,000 mm table length, 1030 mm table width, and a robust ISO 50 spindle taper. The main motor power is 11 kW, ensuring heavy-duty machining capability. It also includes original Elgamill guides for precise column travel. Consider the opportunity to buy this Butler CS10 Bed Type Milling Machine. Contact us for more information about this machine. Application Types Milling Dcedex D Dq Eepfx Ak Aep

Condition: like new (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 2,000 mm, table width: 1,200 mm, table load: 14,000 kg, table length: 4,200 mm, total height: 3,600 mm, total width: 5,800 mm, total length: 10,300 mm, workpiece weight (max.): 14,000 kg, overall weight: 32,000 kg, input voltage: 380 V, spindle motor power: 4,000 W, MTE KT-4200 FIXED-BED MILLING MACHINE The KT series is the larger sibling of the BT series. It shares the same features and advantages but is considerably larger. This larger series was necessary to achieve a greater cross travel of the ram, up to 1,500 mm, with larger motors while maintaining consistent stability. TECHNICAL SPECIFICATIONS Brand: MTE MILLING MACHINES Model: KT 4200 CNC: Heidenhain iTNC 530 Automatic head 2.5° x 2.5° (4,000 rpm) Internal cooling Djdpfj Af Nkzox Ak Ascp SK-50 taper X: 4000 mm Y: 1400 mm Z: 2000 mm Maximum load on the table: 14,000 kg Table: 4200 x 1200 mm Automatic Tool Changer (ATC): 42 positions PRICE AND FURTHER INFORMATION AVAILABLE UPON REQUEST (CNC, SIEMENS, HASS, LAGUN, FAGOR, CINCINNATI, HEIDENHAIN, MACHINING, PINACHO, MORISEIKI, MILLING MACHINE, LATHE, GRINDER, BORING MACHINE, PRESS, LASER, SHEAR, PRESS BRAKE)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table length: 3,500 mm, total height: 4,164 mm, total width: 5,875 mm, total length: 9,120 mm, rotational speed (max.): 6,000 rpm, workpiece weight (max.): 8,000 kg, overall weight: 29,000 kg, torque: 760 Nm, Fixed-bed milling machine, Nicolás Correa BRAVA-30, built in 2005. Dsdpfxjulwy As Ak Aecp Working table measuring 3,500 × 1,100 mm with six 22 mm T-slots and a maximum permissible load of 8,000 kg. Axis travels of 3,000 mm in X, 1,250 mm in Y and 1,500 mm in Z. Automatic UAD milling head with 0.1° indexing on both swivel axes and hydraulic tool clamping, ISO 50 spindle taper to DIN 69871. Front bearing diameter of 85 mm. Constant torque of 760 Nm between 20 and 375 rpm. Main spindle rated at 30 kW with constant power from 375 to 6,000 rpm and a speed range of 20 to 6,000 rpm. Cutting feed of 30 m/min and maximum acceleration of 12 m/s². Ball screws measuring 80×30 mm on the X axis, 50×20 mm on the Y axis and 63×25 mm on the Z axis. Heidenhain workpiece touch probe fitted, plus provision for a Renishaw measuring probe. Portable handwheel. External coolant system together with internal coolant supply through the spindle. Chip removal by two screw-type augers and one lateral hinged-belt conveyor. Fully enclosed guarding. Approximate overall dimensions of 9,120 × 5,875 × 4,164 mm.

Condition: used, Year of construction: 1999, functionality: fully functional, x-travel 4500 mm y-travel 2000 mm Dcsdpjwhqyqofx Ak Aop z-travel 1200 mm spindle taper ISO 50 Cube 2 weight of the machine ca. 20.000 t

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2819-1160, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 300 mm Travel range Y-axis: 300 mm Travel range Z-axis: 400 mm Clamping area: 390 × 620 mm Spindle speed: 40–2,500 rpm Spindle taper: SK 40 Quill travel: 60 mm Rapid traverse: 4.0 m/min Dcsdps Ah Slzofx Ak Aop EQUIPMENT Chip collection tray

Condition: ready for operation (used), Year of construction: 1984, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, overall weight: 7,000 kg, Heidenhain 3-axis control system Variable speed drive for continuous feed Table size: 2000 x 700 mm Dedpfx Akszx Em Dj Ajcp Travel: 1650 x 1000 x 1000 mm Maximum spindle speed: 2066 rpm External electrical cabinet Automatic lubrication Weight: 8000 kg

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Djdpfxsyzf Nao Ak Aocp Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 28217, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, overall weight: 18,500 kg, The combination of the Zayer 20 KF 3000 machine, the Heidenhain TNC 426 control system, and a swivel universal head (Huron type) transforms this milling machine into a versatile and powerful production hub. The swivel head completely eliminates the biggest drawback of large machines – the need to constantly reposition and re-clamp heavy workpieces for machining at different angles. Here’s how precisely this head works with the Heidenhain system and what possibilities it offers. Kinematics and capabilities of the swivel head. The head in ZAYER machines consists of two inclined dividing planes that rotate relative to each other. This design allows for: Transition from vertical to horizontal: In a few moments, you can change the machine from a vertical machining center to a horizontal milling machine. This makes it possible, for example, to simultaneously machine the top of a workpiece and, a moment later, mill its sides. Milling at any angle: The head allows you to position the spindle in space at unusual angles, which is crucial for machining inclined surfaces, chamfering large plates, or creating converging pockets. Enormous rigidity: Although the head is movable, its design locks with tremendous force (mechanically or hydraulically). The machine does not lose any of its ability to perform heavy rough machining (so-called “hogging” with a large chip). Cycle 19 and PLANE in Heidenhain TNC 426 – The magic of software. The biggest challenge with a swivel head is the mathematics – when you tilt the tool, the zero points in the X, Y, and Z axes change. Heidenhain TNC 426 solves this automatically using dedicated geometric functions: Cycle 19 (Machining Plane): You inform the control system of the angle at which you have physically rotated the head. The computer immediately recalculates the entire coordinate system. The tool moves in the axis at an angle, and you program as if you were working on a flat surface. Coordinate transformation: You don't have to manually calculate the tool offset after rotating the head. The controller knows the exact dimensions of the machine's kinematics and automatically corrects the position of the X, Y, and Z axes. Angular drilling: After calling Cycle 19, the standard drilling cycle (e.g., deep drilling) automatically performs the feed movement in the inclined axis – the operator writes the program in the Z axis, and the machine physically moves with a combination of the X, Y, and Z axes. Production benefits in the workshop. Machining 5 sides of a workpiece from a single setup: You place a 5-ton steel block on the table. You clamp it once. By rotating the head, you machine the top and all four sides without moving the workpiece with a crane. This guarantees perfect maintenance of geometric tolerances (perpendicularity and parallelism of the surfaces). Time savings and safety: Repositioning a large workpiece on the table often takes hours and carries the risk of accidents or damage to the table. With this head, you only reposition the tool – manually using dividing plates or in an automatic version from the program. Djdpfx Akszrd Tvo Aocp

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: Djdpfx Ajy Ni Ivjk Ascp 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: refurbished (used), LAGUN 19 Manual/conventional/universal fixed bed milling machine Table dimensions: 2,115 x 700 mm X-axis travel: 1,900 mm Y-axis travel: 950 mm Dcedsxxkwujpfx Ak Aop Z-axis travel: 1,000 mm Electronic handwheel Fagor digital readout BT50 tool holder Hydraulic tool clamping Spindle speed: 28 – 1,800 rpm Feed: 0.25 – 88.60 Automatic guideway lubrication Coolant pump and tank Spindle motor power: 15 kW Weight: 8,000 kg Dimensions: 3,600 x 2,700 x 2,650 mm

Condition: good (used), Year of construction: 1989, Universal head (U-25) Coolant system Hydraulic tool clamping X-Axis: 5000mm Y-Axis: 1200mm Z-Axis: 1500mm Table Length: 5000mm Table Width: 1000mm Dcedowq Rkuepfx Ak Aop Table load: 7000 Power on spindle:19kW Spindle speeds: 14 - 2500Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:5000mm/min. Feed rate Y-Axis:7000mm/min. Length: 11225mm Width: 4100mm Height: 3200mm Weight: 19000kg

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Djdpfx Ajunhy Sok Aecp Documentation for machine

Condition: ready for operation (used), Travel X/Y/Z: 1400mm/1000mm/1000mm, table dimensions X/Y: 1600mm/850mm, max. table load: 2500kg, speed: 4000rpm, spindle power: 22kW, feed: 20m/min, spindle taper: ISO50. Machine dimensions X/Y/Z: approx. 4300mm/2500mm/2600mm, weight: approx. 10000kg. An on-site inspection is possible. Dedpfjy Hk Ulsx Ak Ajcp

Condition: used, Year of construction: 1998, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 9,000 kg, input voltage: 380 V, power: 29 kW (39.43 HP), We are offering this used Correa CF22/20 bed milling machine, manufactured in 1998, for sale. Djdpfx Ajz Sr Uaok Ascp Model: CF22/20 Serial number: 9671801 Year of manufacture: 1998 Power: 29 kW Voltage: 380 V Air pressure: bar Weight: 9000 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Dcodpezcpg Djfx Ak Aep Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, Head Pick up Station TUPC CNC Indexing Micro Head A-Axis 360.000 x 0,001 Gr C-Axis 360.000 x 0,001 Gr SELS Spindle extionsion L=500 mm CTS Internal coolant system ATC Chain Tool changer 60 Positions Hydrostatic guideways Optional T Slotted floorplates 5600 x 1875 (2x) + 4000 x 1875 mm X-Axis: 16.000mm Y-Axis: 3.500mm Z-Axis: 1.500mm Power on spindle: 80kW Spindle speeds: 4000Rpm Spindle Taper: Sk59ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Millinghead auto-index:2.5 x 2.5° Dsdpfxsxpfkko Ak Ascp Length: 24000mm Width: 6500mm Height: 6500mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 2,500 rpm, Heidenhain TNC 407 control unit Table: 2000 x 700 mm Travel: 2000 x 800 x 800 mm Spindle: SA 50 Dedpozbrkpjfx Ak Ascp Maximum spindle speed: 2500 rpm Weight: 10000 kg

Year of construction: 1997, condition: used, machine/vehicle number: B-388, Fixed-bed milling machine FIL FA 160 with HEIDENHAIN TNC-360 control. Dsdpfx Aegcuzrok Aecp

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 3,000 rpm, overall weight: 10,000 kg, Heidenhain TNC 426 control Table: 1400 x 700 mm Travel: 1300 x 800 x 800 mm Spindle: SA 50 Maximum spindle speed: 3000 rpm Dodpfxszbrile Ak Ascp Weight: 10,000 kg

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,200 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,200 mm Spindle speeds: 50 - 2,000 rpm Spindle torque: 3,000 Nm Spindle taper: SK 50 Feed rate - X / Y / Z axis: 2 - 2,000 mm/min Rapid traverse - X / Y / Z axis: 7,000 mm/min Table clamping surface: 2,000 x 800 mm Rotary table diameter: 800 mm Number of tool magazine stations: 56 Tool diameter (all stations filled): 114 mm Tool diameter (with 2 free positions): 200 mm Max. tool length: 400 mm Max. tool weight: 16 kg Tool change time: approx. 8 - 9 sec Control system: SIEMENS SINUMERIK 850 M Dcodpfx Asyl U Thjk Aop MACHINE DETAILS Spindle motor power: 30 kW Dimensions & Weight Dimensions (L x W x H): approx. 6.6 x 3.15 x 2.98 m Machine weight: approx. 25.4 t EQUIPMENT Tool presetting device Various tool holders Chip conveyor Internal coolant supply Coolant system with high-pressure pump and filtration unit Electronic handwheel Fixators

Condition: used, CNC milling machine fixed price Dcjds Aht U Ujpfx Ak Asp loaded onto a truck

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm Dcsdpfx Aewwwqhjk Aep turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: ready for operation (used), 1 used bed type milling machine Manufacturer: Knuth Model: KB 1400 Year: 2006 Technical Specifications: Working Area Distance spindle axis to table surface: 150 mm – 650 mm Number of T-slots: 3 Table clamping surface: 1400 mm x 400 mm T-slot width: 18 mm T-slot spacing: 100 mm Height adjustment speed (max.): 1670 mm/min Travel X-axis travel: 950 mm Y-axis travel: 400 mm Dcjdpfx Akexnp Epj Aep Z-axis travel: 500 mm Vertical Milling Head Spindle taper: SK 50 DIN 2080 Overhang: 510 mm Spindle speed (vertical): 30 rpm – 1800 rpm Quill stroke: 105 mm Head swivel range: ±30° Rapid Traverse Rapid traverse X-axis: 1670 mm/min Rapid traverse Y-axis: 1670 mm/min Rapid traverse Z-axis: 1670 mm/min Feed Feed speed X-axis: 18 mm/min – 627 mm/min Feed speed Y-axis: 18 mm/min – 627 mm/min Feed speed Z-axis: 18 mm/min – 627 mm/min Drive Capacity Main drive motor power: 7.5 kW Feed motor power: 0.75 kW Z-axis motor power: 0.75 kW Coolant pump motor power: 0.04 kW Dimensions and Weight Coolant pump flow rate: 12 l/min Dimensions (L x W x H): 2.29 m x 1.77 m x 2.12 m Weight: 3660 kg