Used Format 4 Dual 51 for sale (39)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a used Format4 jointer-planer machine with a jointer length of 2250 mm. The machine has been inspected by our specialist staff and is in as-new condition. Technical data: Jointer/planer width 510 mm Psdpfxswnd T Ro Adyerc DUAL foldable jointer tables Silent Power cutterblock Planing height 4-250 mm Variable feed rate 4-16 m/min 10 HP (7.35 kW) motor Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, planer, thickness planer, jointer, planer Reference: R-A0117

Condition: used, Year of construction: 2015, This Format 4 panel saw, model: Kappa 550, is being auctioned online in our industrial auction / machinery auction as part of the site clearance of Holzbau Hahn - Hundegger joinery line - woodworking machines - commercial vehicles - tools - materials - containers - shelving. Psdpexqv Iiofx Adyerc

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Podpfx Adjw Nadtoyjrc Equipment and technical specifications: - Control unit with 10.4" touchscreen color display - Extendable workpiece support - Motorized, position-controlled pressure beam - Chain feed with feed speed of 12 m/min - Ball-bearing roller support plate, diameter = 770 mm - Double-motor jointing milling unit / 2 x 1.1 kW - Edge feed for coil and strip material, 0.4 – 10 mm (edge detection via infrared sensor) - Teflon-coated glue unit - Premelting unit for EVA adhesive - Exchangeable glue unit for EVA - Exchangeable glue unit for PUR - Motorized, position-controlled pressure unit - Double-motor end cutting saw unit / 2 x 0.50 kW - Double-motor multifunctional unit for radius, flush, and chamfer milling / 2 x 0.75 kW - Corner processing unit - Radius scraper - Surface scraper - Double-motor polishing unit (buffing) - Spray unit for release agent at the machine infeed side - Spray unit for cleaning agent before the polishing unit Availability: short notice Location: 65439 Flörsheim

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg Psdsvtl Tqjpfx Adyerc - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Predpfxexnm Rcs Adyjc Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: excellent (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, machine/vehicle number: 320.04.001.21, travel distance X-axis: 5,230 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece height (max.): 105 mm, overall weight: 4,100 kg, FOR SALE: FELDER FORMAT 4 CNC + FELDER RL 350 extraction system including piping and tools (milling cutters) FELDER FORMAT 4 • Type: Profit H10 22 43 c-tech • Serial number: 320.04.001.21 • Year of manufacture: 2021 • Operating hours: 121 hours • Safety system with safety mats • Mobile control panel with screen, keyboard, and mouse • 2 vacuum pumps as standard, each with a nominal capacity of 250 m³ + a special version with a third extraction pump to ensure maximum cleanliness during milling • 8-position tool changer FELDER RL 350 extraction system including piping • 3 x 400V 50Hz 15HP 11kW • Maximum flow rate: 8000 m³/h • Nominal flow rate: 20 m/sec, 6920 m³/h • Negative pressure: 2630 Pa Prsdpfx Ajwc R D Eodyoc • Filter area: 71 m² • Extraction connection diameter: 350 mm • Residual dust content:

Condition: excellent (used), Year of construction: 2010, Technical Data Vertical cutting height: 2,200 mm Horizontal cutting height: 2,080 mm Extraction port: 2 x 100 mm Width: 1,700 mm Pjdpjud Sk Ssfx Adyerc Height: 3,000 mm Length: 6,570 mm Motor power: 7.5 HP (5.5 kW) Motor voltage: 3 x 400 V Saw blade diameter: 300 mm Cutting length: 5,300 mm Cutting depth: 80 mm Digital display for horizontal and vertical cuts Year of manufacture: 2010 Net price: 11,190

Condition: used, Year of construction: 2017, functionality: fully functional, cutting height (max.): 2,200 mm, cutting length (max.): 4,200 mm, saw blade diameter: 250 mm, We are offering a Format 4 Kappa V60 vertical panel saw, purchased as an ex-display model. The machine has only been used very occasionally by us, serving as a backup or to supplement our processing capacity. The unit is in very good condition. Please feel free to contact us. Motor power: 4.5 kW (6.0 HP) - Cutting length: 4200 mm Podsxg Ecnjpfx Adysrc - Cutting depth: 60 mm - Cutting height: 2200 mm - Year: 2017 The listed price is net.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Prodpfsw Nadaex Adyec Original packaging Features and technical data: • Tilting circular saw unit, adjustable from 90° to 45° • Saw blade diameter: 250–450 mm, maximum cutting height 155 mm, electric height adjustment • Electric angle adjustment with digital display for height and angle • Crosscut fence 3200 mm, pivotable 90–45°, 2 stop jaws • Machine base: kappa 450, circular saw table made of cast iron, operating tool included • 3 speeds: 3500/4500/5500 rpm, 50 Hz • Electrical system for panel saw: 3x400 V, 5.5 kW (7.5 HP) S6, SD start, CE-compliant with brake • Cutting width: 1250 mm • Overhead guard for cutting width 1250 mm, adjustable hood for 90° cuts and swiveling hood for angle cuts, height adjustable and can be moved out of the working area. • Saw blade diameter: 450 mm, dust extraction connection D-100 mm • Parallel fence with digital display and automatic length compensation when the saw blade is tilted, fence rail length 1200 mm, can be swung away • Sliding table cutting length: 2800 mm, anodized, edging shoe (W-Alu/An-Grey), 10-year Felder warranty on "X-Roll", the Felder format table guide system! • Extension table 1250x650 mm X-Roll with movable support rail and digital angle display, cutting length 2800/3200 mm Availability: Immediate Location: Flörsheim Sale on behalf of customer

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Prodpfsrrh T Ajx Adysc Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, pivoting control panel, program memory, automatic pressure bridge adjustment, feed via conveyor chain, extendable workpiece support, diamond jointing cutter for up- and down-feed, glue pot located underneath, glue pot changing device, use of PUR adhesives possible, GLUEBOX, printing unit with driven roller, cross-cut saw with 2 HF motors, pneumatically pivoting cross-cut saw, flush/radius trimming unit, motorized positioning control of the trimming unit, x-motion PLUS, Prodpfx Aju R S Nwsdyjc corner rounding unit with diamond-coated cutter, radius scraper, radius scraper with motorized positioning, surface scraper, operation-controlled Surface scraper, Inlet barrier, Release agent spray device, Lubricant spray device, Cleaning agent spray device, Year of manufacture 2022 ----- Technical specifications ----- Edge thickness for rolls: 0.4 - 3 mm, Edge thickness for strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, Min. workpiece length: 140 mm, Feed speed: 10 m/min., Screen diagonal: 15 inches, Dimensions of jointing cutter: D 80 x 64 mm, Joining cutter power: 1.1 kW, Crosscut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg Quality information: - All settings checked - Adjusted according to manufacturer's specifications - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, Year of construction: 2016, Used machine Podpow I Uv Uofx Adysrc Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: ready for operation (used), Year of construction: 2019, This FORMAT4 HVP Typ 4 was manufactured in 2019. Designed for integration with existing heating systems, it can press at temperatures up to 90°C. The robust steel platen supports a maximum pressure of 5kg/cm², making it ideal for veneer processing. Consider the opportunity to buy this FORMAT4 HVP Typ 4 veneer press. Contact us for more information about this machine. Predpfxjw Ntd Hj Adyoc Application Types Pressing / Laminating

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm motor power 7,35kW Prjdpsw Ad Iwjfx Adyoc angle regulated fence year 2008 iron cast tables

Year of construction: 2021, condition: ready for operation (used), Main Drive Spindle speed range 24000 rpm Spindle motor power 12 KW Tool taper HSK F63 Number of axis 3 Movement X-Axis Movement 3500 mm Y-Axis Movement 950 mm Z-Axis Movement 80 mm Table Table load 130 kg Tools Max weight 7.5 kg Pjdpfsxnd I Eex Adysrc Additional Equipment Teleservice package via Internet Automatic central lubrication 4-fold linear changer for use with power packs This 3-axis FORMAT4 Creator 950 CNC Wood Machining Centre was manufactured in 2021. Ideal for precision woodworking, it offers robust construction and advanced control features. Consider the opportunity to buy this FORMAT4 Creator 950 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: excellent (used), Year of construction: 2022, operating hours: 175 h, functionality: fully functional, feed length X-axis: 3,700 mm, feed length Z-axis: 80 mm, power of the milling unit: 12,000 W, type of input current: three-phase, rotational speed (max.): 24,000 rpm, workpiece length (max.): 3,700 mm, workpiece width (max.): 950 mm, table width: 950 mm, input frequency: 50 Hz, air pressure: 6 bar, overall weight: 2,500 kg, working width: 950 mm, Equipment: rotational speed infinitely variable, Lightly used 3-axis CNC machine available immediately! 4-sided formatting 12kW main motor HSK 63F Automatic 4-position tool changer Pickup station for additional tools Drilling head DH17 Prodpfoxmbm Aox Adyec 2 alignment stops in X-direction for short/long panels Foldable tables at front and rear Software on the machine AND in the office with dedicated license DXF import Modern, fully-featured CNC machine with low operating hours – immediately available!

Condition: as good as new (ex-display), functionality: fully functional, The Format4 creator 950 in a wide range of equipment variants - your CNC machine for individual woodworking challenges. Efficient CNC processing at a fair price - this principle is at the heart of the creator machine series. All models are attractively equipped with the latest CNC technology and can be customized to meet specific requirements. The creator 950 is not only an easy and safe entry into the CNC world, but also serves to relieve your CNC machining centers. Your advantages at a glance: Concentrated CNC technology on a footprint of just 5 m² All-inclusive: 4-sided formatting as standard Get started right away: Maximum productivity without set-up times No suction cup and console positioning Use from interior fittings to room doors Prsdpfx Aju Eg A Uedyjc Traditional processing from above - extremely simple loading Intuitive control via control panel Easy to understand software Best suction result High-end at the best price in every configuration Carcass processing with Lamello Clamex-P Additional equipment: C19 2nd stop reference cylinder for long workpieces C71 Folding support tables front+rear - roller table C198 Pick-up space for tool and unit change C200 4-fold linear changer for use of units C233 Holder for crane transport C490 F4design (incl. 3-axis PP) 800 E-Learning F4Design Creator processing field: Travel of the axis X= 1475mm (bracket) Y=1550mm Z= 225 mm Working field X= 3500 mm (infinite) or 130 kg maximum load Y= 950 mm Z= 80 mm Machinable workpiece Equipped with: High-performance PC 24" LED color display Keyboard, mouse and mouse pad 1 USB interface

Condition: used, Year of construction: 2009, No. 04487 Edge banding machine Format4 Perfect 50 Used, year of construction 2009 114 operating hours Touchscreen color display Panel thickness 10 - 55 mm Minimum panel width 60 mm Minimum panel length 140 mm Edge thickness 0.4 - 8 mm Edge height 12 - 63 mm Variable feed speed from 12.5 m/min Spraying of release and cleaning agents - Workpiece chain conveyor - Glue roller and glue unit, Teflon-coated, for EVA hot melt adhesive - Pressing unit - Impact shears for precutting - Cross-cut saw unit, pneumatically controlled, inclination 0° - 15° - Combination trimming unit for flush and radius trimming, inclination up to 15° - Scraper unit - Polishing unit - Blow-drying unit Suction connection diameter 2 x 120 mm Operating instructions and electrical circuit diagram available Transport dimensions approx. 4250 x 1100 x 1700 mm LWH Weight approx. 1200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Predpfx Adoxbf S Ejyjc For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, total length: 4,500 mm, workpiece height (max.): 60 mm, total width: 1,200 mm, edge thickness (max.): 10 mm, height adjustment type: mechanical, power: 11 kW (14.96 HP), Max. edge thickness: 10 mm Max. panel thickness: 60 mm Max. roll material thickness: 3 mm Max. feed speed: 12 m/min Manual height adjustment Granulate glue system: glue pot below Quick-change glue pot: Yes Strip magazine: Yes Jointing milling unit: Yes Cut-off saw unit: 2 motors Flush/radius trimming Scraper unit: profile scraper, flat scraper, Yes Buffing unit: Yes Version: right-hand machine Pedpsw Av E Isfx Adyorc Machine dimensions: approx. 4,500 mm x 1,200 mm Control: FORMAT 4 E-MOTION Price plus VAT Machine is still in operation and can be tested at any time.

Condition: ready for operation (used), Year of construction: 2024, Additional Equipment Application unit with Teflon coating for 1.5 kg EVA granulate Upper and lower polishing unit Psdpfx Aexlu Ukedyorc This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Application Types Edge Banding

Condition: used, Year of construction: 2020, functionality: fully functional, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, type of input current: three-phase, Further technical data: Ball-bearing turntable for edge banding rolls, Ø 740 mm Edge thickness: 0.4 – 3 mm Workpiece height: 8 – 45 mm Extendable workpiece support up to 450 mm Manually adjustable workpiece height m-motion and x-motion PLUS control systems (highest setting repeat accuracy, programmable) Robust processing units in new design, solid machine base, precise extraction system Additional equipment: Pedpfjxdb U Ujx Adyorc Surface scraper Spraying unit for cleaning agent LED lighting package Tempora 45.03 Spraying unit for release agent Cross-cut saw unit with 45° travel path and radius processing Pneumatic-mechanical infeed lock 75 x-motion PLUS package Tempora 45.03

Year of construction: 2022, condition: ready for operation (used), Main Drive Spindle motor power 12 kW Tool taper Partly with HSK Number of axis 5 Movement X-Axis Movement 4455 mm Y-Axis Movement 2595 mm Z-Axis Movement 495 mm Additional Equipment Automatic central lubrication: Yes Control cabinet with new main computer: Yes // Control terminal with keyboard and mouse: Yes Handheld terminal for remote control: Yes Vacuum system: 1060 square meters (oversized) Safety device with light barrier and bumper: Yes Pjdpfxoxfw Dho Adyjrc Drilling head: 12 vertical drilling spindles Controlled central extraction connection: Yes Machine control: "F4Operate", "F4Tollbox", "F4Create" 3D nesting software: F4Nest Powerful machine PC: Yes This 5-axis FELDER Format 4 Profit H150 22.32 T was manufactured in 2022. It features a 5-axis main spindle with 12 kW power, a 17-fold linear changer, and an 18-position plate changer. The machine includes a comprehensive control system with F4Operate, F4Toolbox, F4Create, and 3D nesting software F4Nest. It also boasts a complete compressed air system and automatic central lubrication. The FELDER FORMAT4 Profit H150 22.32 T machine we have for sale. Contact us for further details regarding this CNC Wood Machining Centre. Application Types CNC Wood Machining

Condition: as good as new (ex-display), functionality: fully functional, power: 7.35 kW (9.99 HP), spindle diameter: 30 mm, pivoting range: 46 °, input voltage: 400 V, rotational speed (min.): 1,000 rpm, rotational speed (max.): 18,000 rpm, input frequency: 50 Hz, The new profil 92 M e-motion spindle moulder is Format4’s premium model, offering maximum operating comfort and ensuring absolute efficiency through minimal setup times during milling operations. The advanced electric spindle features an HSK 63F interface for a tool quick-change system with pneumatic clamping. The swiveling range of ±46° enables limitless machining versatility. With the self-explanatory e-motion control via a 15-inch touchscreen panel, spindle speed, spindle height and angle, as well as the fence position and even the table opening, can be set intuitively and precisely. Integrated memory for tools, spindle settings, and milling programs ensures perfect repeat accuracy and the shortest setup times. Electrically controlled, eccentric inserts provide maximum table support area and significantly reduce adjustment work, especially when swiveling the spindle. The newly developed heavy-duty precision milling fence features two powered axes for precise depth adjustment of the complete fence, plus an independent, adjustable depth stop for the right-hand feeding jaw. For convenient access during curve milling, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can be equipped with an electrically height-adjustable power feeder. Further technical data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F spindle, Ø 30 mm, 140 mm 118 Integral safety rulers, 650 mm 119 Table opening 255 mm with controlled eccentric inserts 183 Table extension on both sides 670 mm with 2200 mm sliding frame 213 Electrically height-adjustable feeder support, incl. horizontal tube Prodpfx Aswztr Nedyjc 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed adjustment and HSK 63F interface - Position control for milling height and angle ±46º - Position control for milling fence including offset function - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric inserts (optional) - Electrically adjustable height for the feeder on overhead column (optional) Further information: - The electric spindle features a HSK F63 tool quick-change system - Clamping range: 2–25 mm with OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm sliding frame - Table opening 255 mm with controlled, eccentric inserts

Condition: as good as new (ex-display), functionality: fully functional, planing width: 630 mm, overall weight: 1,050 kg, extraction nozzle diameter: 160 mm, number of planer blades: 4, input voltage: 400 V, input frequency: 50 Hz, Further technical data Jointing table length: 1,050 mm Planing width: 630 mm Cutterhead: 4-knife system cutterhead Thicknessing height: 3 – 300 mm Thickness table adjustment: electric Feed gearbox: variable feed gearbox 5–20 m/min Motor power: 13 HP (10 kW) Chip removal: 10 mm Standard equipment Star-delta starter Psdpsxazp Refx Adyerc Cutterhead with 120 mm cutting circle Speed 5,000 rpm 4-knife system cutterhead (knife length 635 mm) Electric height adjustment for thicknessing table Electronic digital display Segmented pressure bar at infeed Spring-loaded pressure bar at outfeed Infeed roller steel, spiral-toothed, Ø 85 mm Outfeed roller steel, micro-toothed, Ø 85 mm Variable feed gearbox 5–20 m/min Optional equipment 008 10 kW (13 HP) motor 010 Star-delta starter 044 Silent-POWER spiral cutterhead 060 Positioning control for thicknessing table height "Digi-Drive" 062 Segmented infeed roller, steel 063 Rubber-coated outfeed conveyor roller 065 Second rubber-coated outfeed conveyor roller 211 Infeed-side workpiece support roller 225 Scissor lift table at the thickness table outfeed Whether in carpentry, solid wood joinery, or modern furniture construction – the new Format4 thickness planer exact 63 delivers impressive results in every area.

Condition: used, Year of construction: 2022, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,000 mm, power: 10 kW (13.60 HP), included special equipment Circular saw with table extension up to 1620 mm behind the saw axis, anodized aluminum Prsdexdcvtopfx Adyjc Remote control for swinging away the upper guard Position-controlled parallel fence, cutting width 1000 mm Format sliding table "X-Roll", cutting length 3200 mm, squaring arm Swing-away device for outrigger table Crosscut fence with 1 digital stop