Used Funnel for sale (122)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, total length: 172 mm, total width: 229 mm, total height: 391 mm, type of input current: AC, input voltage: 220 V, warranty duration: 24 months, DGUV certified until: 06/2028, ambient temperature (min.): 15 °C, Edhard pastry filling machine series P Model: Edhard filler P 4020 Pastry filler for automatic filling Dosing amount via digital control panel 5.5 liter funnel with spout Table-top unit With this filling and dosing system, masses are directly into 2 pieces of pastry Fpedpfsfxk Txjx Ahnjh dosed via two 57mm long, 7mm thick filling tips. The plastic funnel holds 5.5 liters. The motor base triggers every time the switch is pressed. Exactly the set amount up to max. 800g injected Connection 220V, 44 watts Dimensions: 172 x 391 x 229 mm, DxHxW NEW device with 12 months warranty Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: used, maximum load weight: 29,811 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2022, loading space length: 8,785 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 3,690 mm, Equipment: ABS, VEHICLE NUMBER: 2976 ----* Exterior Features: * Galvanized chassis * Full-capacity aluminum drop supports * Compressed air connection at the rear * Reinforced rear edge * 1 pair of additional tension locks * Rear tailgate with door and swinging function * 2 grain discharge sliders * 1 discharge funnel with sack * Extendable access ladder at the rear * Holder for hydraulic hose in park position on work platform * Additional bracing on the work platform * Load pressure gauge * Aluminum air reservoir * Holder for broom and shovel * LED cargo area lighting * Rolling tarpaulin * Roof-shaped cover frame with transverse tension chain and roof bows * Tarpaulin operating pole * LED perimeter lighting * LED work lights * LED tail lights * Toolbox on both sides * 30-liter plastic water tank * 4000mm aluminum hook-on ladder with side mount * Tow coupling with pre-inserted pin, left in driving direction * 'A' signage for waste transport ----* Technical Specifications: * ROTOS axles with disc brakes * Lift axle on 1st axle * Tires 385/65 22.5 * Tread depth in mm: 1st axle: 10/14, 2nd axle: 16/16, 3rd axle: 10/10 * Tire pressure monitoring system * Automatic lowering during tipping operation * HYVA tipping cylinder 190 bar * 1" screw coupling, female thread * 8mm thick trough floor * Internal seams fully welded * Fifth-wheel height: 1,150mm - 1,250mm * Loading height: 3,670mm * Unladen weight: 6,189kg * Main inspection/TÜV: 06/26, Safety Inspection: 12/26 ----* Hire Purchase Example: €515 monthly payment, 60-month term, 10% down payment (your used vehicle can qualify), 10% final payment. * Delivery to your location possible. Trade-in/ Leasing/ Financing. We make it happen! Fedpsy Haakefx Ahneph

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 Fpedpfey Dmvajx Ahneh * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Fjdpfx Ahsdzqw Isnjph Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. The maximum operating temperature is 80 ° C.

Year of construction: 2013, condition: used, Gravimetric mixers (GRAVIX Series) These are robust, multi-component systems. In the photos you can see the characteristic funnels for the various components that the system weighs with extreme precision. The Moretto DGM Gravix 120 dosing system belongs to the middle category of gravimetric dosing machines, which are characterized by extreme precision and resistance to industrial vibrations. Main technical parameters This model is designed for precise mixing of multiple components directly at the machine neck. • Maximum performance: Up to 120 kg/h (depending on the bulk density of the material). • Accuracy: Up to ±0.001% thanks to the technology of weighing each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (with the possibility of expansion according to the version). • Response speed: The patented "Double Eyelid" system opens and closes in 25 ms. • Weighing hopper volume: Optimized for medium-sized batches with free suspension without mechanical interference. _____ Key technologies • VIS (Vibration Immunity System): Allows installation directly on injection molding machines or blow molding machines without loss of accuracy due to machine movement. • Rotopulse: Special device for micro-dosing of additives (from 0.08 g), which prevents the formation of domes in the material. • Double-Effect Mixer: Hemispherical mixing chamber ensures a perfectly Fsdpfx Aoy Uw Ubohnsph homogeneous mixture without "dead spots". • MOWIS Ready: Full connectivity for remote management, data export via USB, Ethernet or Modbus

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Fpsdpfx Ahoxwaz Henjh

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). Fpedexnlflepfx Ahnsh - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Fsdpfxjgmh H Ts Ahnjph Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2024, production time appr. 4 months * for suction perception, see picture 4 and 5 Fpoded Hkqhopfx Ahnsh Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total height: 2,200 mm, total length: 1,700 mm, total width: 1,100 mm, rotational speed (max.): 2,650 rpm, power: 1.6 kW (2.18 HP), water tank capacity: 100 l, RÖSLER RZ 150 A cleaning system – automatic sludge removal For sale: a professional RZ 150 A cleaning system with automatic sludge removal. This unit is designed for industrial use, fully automated, and equipped with modern solutions to increase efficiency and durability. Key parameters: • Dimensions: 1700 x 1100 x 2200 mm • Power: 1.6 kW • Rotor speed: 2650 rpm • Rotor made of aluminum alloy • Steel housing Equipment and functions: • Smooth start and stop thanks to the frequency inverter Fpjdpszca Apjfx Ahneh • Adjustable sludge removal speed • Automatic retraction of the cleaning blade • Automatic removal of remaining water • Electronic vibration control • Automatic rotor flushing • Special bearing lubrication system to extend the unit's service life Central control unit E61-400: • Control and monitoring of the cleaning system • E61-400 control unit • SIEMENS S7-1200 controller • Ensures automatic and stable operation of the entire system Sludge removal time is adjustable from 2 to 5 minutes, depending on the consistency. A single cycle removes up to 25 kg of sludge. Additional system equipment: • Sandpiper P9 diaphragm pump for supplying water to the centrifuge • Pump operation cycle control • Water level control in the tank The set also includes a P 100 SB-P9 buffer tank for residual dirty water from the centrifuge. The tank is required if the centrifuge is located far from the source of dirty water. P 100 SB-P9 buffer tank: • Height: 700 mm • Capacity: 100 l • Designed for transporting dirty water and rotor flushing water to the buffer tank • Made of durable HDPE polyethylene (black color) • Sloping, 3-sided funnel-shaped bottom • P9 diaphragm pump – operating pressure 4 bar • Water level control RSKM 30 waste container: • Capacity: 300 l • Dimensions: 1300 x 820 x 800 mm • Manual operation • Can be transported and emptied using a forklift • Made of steel • Discharge port with drain plug • Equipped with a tilting mechanism The unit is robust, efficient, and ready for operation.

Year of construction: 2015, condition: used, Moretto DGM 120 S (2015) Gravimetric mixers (GRAVIX Series) These are robust, multi-component systems. In the photos you can see the characteristic funnels for the various components that the system weighs with extreme precision. The Moretto DGM Gravix 120 S dosing system belongs to the middle category of gravimetric dosing machines, which are characterized by extreme precision and resistance to industrial vibrations. -electrical data: 230V; 50/60Hz; 1kW -weight: 9,35 kg Main technical parameters This model is designed for precise mixing of multiple components directly at the machine neck. • Maximum performance: Up to 120 kg/h (depending on the bulk density of the material). • Accuracy: Up to ±0.001% thanks to the technology of weighing each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (with the possibility of expansion according to the version). • Response speed: The patented "Double Eyelid" system opens and closes in 25 ms. • Weighing hopper volume: Optimized for medium-sized batches with free suspension without mechanical interference. _____ Key technologies Fpsdpfey Udkcex Ahnjh • VIS (Vibration Immunity System): Allows installation directly on injection molding machines or blow molding machines without loss of accuracy due to machine movement. • Rotopulse: Special device for micro-dosing of additives (from 0.08 g), which prevents the formation of domes in the material. • Double-Effect Mixer: Hemispherical mixing chamber ensures a perfectly homogeneous mixture without "dead spots". • MOWIS Ready: Full connectivity for remote management, data export via USB, Ethernet or Modbus

Condition: used, maximum load weight: 32,820 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,730 mm, Year of construction: 2024, Equipment: ABS, SCHWARTE-JANSKY stainless steel V2A slurry tanker semi-trailer, 30,000 liters First registration 03/2024 Unladen weight only 6,180 kg BÖRGER rotary lobe pump, output max. 6,000 liters/min., with interchangeable housing shells, design without gearbox Fpodpfx Aey S Npxshneh Automatic pump shut-off, filling level of the tank can be easily adjusted by the driver Flushing line DN150, with 3 outlets (in front of each baffle and in front of the front floor) 2x baffle plates Manhole cover DN500 Suction funnel 8" at the top rear Hose trays, stainless steel, approx. 6,000 mm long on the left Swivel outlet at the rear in 6" with Perrot coupling Emptying device for the product hose All valves pneumatically operated, including monitoring function Valve control with WIRELESS REMOTE CONTROL Complete piping system made of V2A stainless steel SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE 3rd axle: Steerable trailing axle WABCO trailer EBS with RSS stability program Tires 6x 385/65 R 22.5 Saddle height approx. 1,150 to 1,250 mm Crank-operated full-load saddle supports Stainless steel storage box on the left, 500 x 600 x 500 mm 4x LED work lights RENTING is the new BUYING; with us, it is also immediately available with a full-service rental.

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE Fpodpfx Ajv Dz Ixehnsh 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Year of construction: 2026, condition: new, functionality: fully functional, power: 0.7 kW (0.95 HP), overall weight: 621 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 2,112 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO VS COMPACT vibration screen delivers efficient material separation for recycling, construction, landscaping, agriculture, and biomass processing. Customers benefit from high throughput, flexible setup, and compact mobility, making it ideal for soil screening, gravel screening, wood chips, compost, waste materials, and recycling applications. Key Features: - Compact, foldable semi-mobile design for space-saving transport and setup - Two powerful vibration motors for reliable high-performance screening - Adjustable screen angle and quick-change screens (perforated, grid, bar) - Modular expansion with conveyor belts and funnel plate for up to 3 fractions - User-friendly operation with 400V connection compatibility Tech Highlights: Fpedpfxewyl Ugo Ahnsh W 1.88 m · L 1.31 m · H 2.11 m · Loading height 1.76 m · Screen area 3 m² · Qmax 30 t/h · Power 2 × 0.35 kW (400 V) · Max bucket width 1.65 m · Weight 621 kg

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Fpedpfxsxqdxcs Ahnoh Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, GAROS MDF 5600K ID.NO. 2689 Fpedpsrzqzuefx Ahnjh Garos MDF 5600K Vacuum tumbler / Massage tumbler with cooling function. Capacity 5600 liters built-in vacuum pump & associated filling funnel included. Dimensions 520 x 210 cm Height 280 cm.

Condition: used, maximum load weight: 34,880 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 10/2009, loading space volume: 34 m³, Year of construction: 2009, Equipment: ABS, Stock no. 5835 Fpjdpfx Ahjy T Dlqsnoh 34,000 liter Spitzer tank trailer with 4,000 liter Vogelsang pump / trailing axle / aluminum rims ---- * Manufacturer: Spitzer * Type: SF2734/2P * First registration: 10/2009 * Gross vehicle weight: 40,000 kg * Unladen weight according to vehicle registration document: 5,120 kg * Payload: 34,880 kg * Axles: 3 x BPW / 3rd axle is a trailing axle / disc brakes * Suspension: Air suspension * Tires: 385/65 R 22.5, approximately 50% tread, on aluminum rims * EBS Wabco * Color: Blue/White * Operating temperature from -20 degrees to +80 degrees * 2 funnel cones * 2 baffle plates * 3 dome lids, screw-on * Vogelsang 4000 liter rotary lobe pump, type VS 136-2106 * Sight glass on the front left * 2 outlets, left + right * Flushing connections with 3 valves to flush both outlets separately * Access with walkway on the left, pneumatically operated from below * Individual fenders * Open hose storage on the right * Full load supports * Loading pressure gauge * LED reversing lights * Work lights on the side * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Fpsdpfxjrivv Eo Ahnsh Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Year of construction: 2023, operating hours: 15 h, condition: as good as new (ex-display), functionality: fully functional, power: 0.35 kW (0.48 HP), overall weight: 621 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 2,112 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO VS Compact Two Deck Vibration Screen delivers efficient material separation for recycling, construction, agriculture, and landscaping. Ideal for screening soil, gravel, wood chips, and waste, it offers high throughput, flexibility, and compact mobility—perfect for professionals needing reliable, space-saving performance on any job site. Key Features: • Dual-deck screening: up to three material fractions Fpedpfxow Ryzuj Ahnoh • Compact, foldable design for easy transport and setup • Modular add-ons: conveyors, funnel plate, and more • Adjustable screen angle for optimal separation • Quick-change screen system for perforated sheets, grids, or bar sizers Tech Highlights: W 1.88 m · L 1.31 m · H 2.11 m · Loading height 1.76 m · Screen area 3 m² · Qmax 30 t/h · Power 2 × 0.35 kW (400 V) · Max bucket width 1.65 m · Weight 621 kg

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical data: - Log house milling machine BL100A - four-head unit - For producing chalet corner joints by milling on four sides of the log plank in a single clamping, using 2 × vertical and 2 × horizontal milling spindles - Processing dimensions: 140 × 200 mm - Milling spindles: Ø 30 mm Fpjdoyxyanspfx Ahnsh - Cutter: max. 4 × 220 × 100 mm - Motor power: 4 × 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Operation: two-hand activation / via PLC control - Milling depth adjustment: spindle, digital counter - Workpiece clamping device: 2 × vertical, pneumatic - Extraction: underfloor funnel, Ø 160 mm - Equipment: complete with electrical system, PLC control, and pneumatics - Machine base: prepared for end groove unit, drilling device, and cross-cut saw - Machine enclosure: closed design, hinged safety cover (gas spring) with viewing window - Control cabinet: on pedestal with 3.0 m cable sleeve - Delivery condition: ready for operation, without tools - Horizontal clamps in machine table: 2 units - Activation: pneumatic, front-mounted - Clamping cycle: automatic via PLC control - End groove unit integrated - Milling spindle: Ø 30 mm - Cutter: max. 180 × 40 mm - Motor power: 3.0 kW - Speed: 4,200 rpm - Feed: hydropneumatic, steplessly adjustable, with rapid traverse - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, without cutters - Horizontal drilling device integrated, with drill guide and chip guard - Drill diameter: max. 30 mm - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: pneumatically, steplessly adjustable, with rapid traverse for idle stroke - Height adjustment: spindle, digital counter - Workpiece clamping device: 1 × additional vertical, pneumatic - Equipment: integrated, with electrical system and pneumatics, incl. Ø 20 mm drill bit - Under-table cross-cut circular saw integrated (automatic mode only) - Maximum cutting dimensions: 200 × 140 mm (W × H) - Saw blade diameter: 500 mm - Motor power: 4.0 kW - Cutting speed: 86 m/s - Feed: pneumatic - Workpiece clamping device: pneumatic - Extraction: suction funnel Ø 120 mm - Equipment: integrated, with electrical system and pneumatics, incl. saw blade - Prepared for automatic operation - Sliding table: mechanics, pneumatics, and electrics for end groove mill - Interface: electric, for actuation via external Tigerstop control - Infeed table length: 9,000 mm - Outfeed table length: 4,000 mm Availability: short notice Location: Röllbach

Condition: new, maximum load weight: 32,965 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Buy, rent, or rent with a purchase option by arrangement! 30m³ D-Tec V2A Slurry Tanker Trailer / Rear-Steering Axle / Lift Axle / NEW VEHICLE ---- * Manufacturer: D-Tec * Model: SV 2006 * NEW VEHICLE * Gross weight: 39,000 kg * Unladen weight (manufacturer specification): 6,035 kg * Payload: 32,965 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes / traction assist * Suspension: air suspension with raising & lowering facility * Tires: 385/65 R22.5 on steel rims * Color: Chassis RAL 9005 black, tank body RAL 7015 grey * Volume: 30m³ / Ø 2.20 m / single chamber * Wabco EBS * Vogelsang rotary lobe pump * Max. flow rate: 6,000 L/min * Swivel outlet at the rear * 8" docking funnel on top, sealable with a manual gate valve * Filling and venting with pneumatic shut-off valve including safety for all air-operated valves * 1" ball valve on pump right side * 4" flushing pipe with two 2.5" free-fall outlets (1x at the front and 1x in the center of the tank) * Automatic pump shutdown * Pneumatic control box at rear left * 1x foldable dome cover * 5 m hose racks left and right (galvanized steel) * Fill level indicator front left * Operating temperature 0-60 degrees Celsius * Side access ladder left * Empty load supports * Single mudguards * Saddle height 1,180 mm * 24V lighting system * 2x LED work lights at rear * 2x LED work lights left and right German trailer!! German documents!! NEW VEHICLE!! New vehicle! Buy, rent, or rent with a purchase option by arrangement! Fjdpox Suxlefx Ahnsph Note on potential errors in the listing: Despite careful preparation of the ad, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All details are provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: new, power: 480 kW (652.62 HP), fuel type: diesel, wheelbase: 43,000 mm, fuel: diesel, fuel tank capacity: 300 l, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, traction control, trailer coupling, - Alarm - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - High beam - Low noise - Speed limiter - Air conditioning - Air-suspended seats - PTO - Rear view camera MAN TGS 35.480 BB 8x4 EURO 6e EuromixMTP EM 9 L - NEW - without registration Vehicle Equipment: Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e MAN TipMatic 12.28 OD - MAN TipMatic Offroad, -TipMatic Efficiency 300 l tank volume - 35 l AdBlue tank volume High-performance engine brake MAN EVBec, adjustable Hill start assist MAN EasyStart Front axle tires, optional 385/65R22.5 steering-S+G TL Rear axle tires, optional 315/80R22.5 drive-S+G TL Axle ratio, i=3.63 Rear axle, 13,000 kg, AP axle - Front axle, 9,200 kg Differential locks on driven rear axles Suspension type leaf/leaf (BB) on front axles and driven rear axles Bumper, steel, 3-part Sun visor, in front of windshield Windshield wiper operation, automatic, with rain sensor (automatic wiper system) Daytime running light, LED - High beam assistant - Work lights on the rear of the cab Exterior mirrors, electrically adjustable, heated Driver comfort seat, air-suspended - Armrests for driver's seat Multi-function steering wheel, adjustable in height and inclination Preparation for toll collection system Toll Collect Tachograph, digital, with remote communication (according to DSRC), CONTINENTAL Color scheme Moon Grey for the cab interior Air conditioning, manual Lift roof, mechanical - Rear wall of cab, with window 2 sockets, cab roof console, 12 V and 24 V Traction control system (ASR) Cruise control (speed control system) Lane departure warning system LDW MAN Media System Advanced 7 inches MAN Sound System Advanced - Smartphone integration Maximum vehicle noise level, 79 dB according to UN/ECE-R 51.03 Trailer coupling on end crossmember, RINGFEDER type RF40/G150A EUROMIX MTP - Concrete mixer body EM 9 L Model: EM 9 L Nominal volume 9 m³ ready-mix concrete Mixing drum in lightweight design Mixing drum in lightweight version made of HB 450 material Mixing spirals in lightweight version made of HB 500 material Gearbox manufacturer ZF-P5300 or EuromixMTP Fedpfx Ahey S Sv Usnsph Hydraulic pump manufacturer Bosch Rexroth or EuromixMTP Hydraulic motor manufacturer Bosch Rexroth or EuromixMTP Oil cooler system integrated, manufacturer ASA Mixing control, mechanical, start/stop electric Compressed air water system Water connection on the platform with hose line Water filling line, one-sided with C-coupling Mixing drum with one service flap Ladder with platform Rubber attachment on the filling funnel Swiveling, single-arm discharge chute made of steel Wear plates in filling funnel, discharge trough and swivel chute Drum lock for securing the drum during maintenance work Polyurethane primer Weight approx. 3,425 kg, deviations +/- 5% with emergency stop function according to EU safety technology Fenders made of aluminum above the rear axles 2x extension gutters made of steel or plastic Water system Water tank 500 l (compressed air) Water tank steel Shut-off valve mounted below the water tank in the filling line.

Condition: used, maximum load weight: 28,620 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2012, loading space length: 10,600 mm, loading space width: 2,430 mm, loading space height: 1,600 mm, loading space volume: 41 m³, Year of construction: 2012, Equipment: ABS, Air suspension, lift axle, BPW drum brakes, EBS, aluminum rims, aluminum drop-down supports, cargo area lighting, access ladder, PVC half-shell mudguards, foldable aluminum underrun protection (UFS), double-sided AFS, aluminum hollow profile side walls, 5 mm front wall, 7 mm floor, rear wall made of 40 mm aluminum profiles (overlapping), slider, funnel with dust bag, catwalk with ladder, PVC roll tarp with central locking, reflective sign, WZK Fpsdpfx Aoxfd Sfjhnsh

Condition: ready for operation (used), Clipper Technopack Fpodpfx Ajrvgt Ijhnsh Type: KDCV 70 Power: 0.1 kW Dimensions: 1250 x 600 x 1850 mm Weight: 118 kg For all covers Plastic, fibrous, collagen and natural Mobile machine on a trolley In set funnel 22 mm Stock quantity: 1 Condition: Used

Condition: used, maximum load weight: 32,998 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2024, next inspection (TÜV): 12/2026, loading space volume: 30 m³, Equipment: ABS, Stock no. 5337 For sale, for rent, or lease with purchase option upon agreement! ONLY approx. 68,000 km driven! Approx. 30m³ D-Tec slurry tanker semi-trailer with 6,000-liter Vogelsang pump / rear-steering axle ---- * Manufacturer: D-Tec * Model: VTT-01 * First registration: 02/2024 * Gross weight: 39,000 kg * Unladen weight (as per registration): 6,002 kg * Payload: 32,008 kg Fpodpfx Ahoy Srbkenjh * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes * Suspension: Air suspension with raising and lowering function * Tyres: 385/65 R 22.5 on steel rims * Colour: RAL 7016 * TÜV (roadworthiness certificate): valid until 12/2026 * Volume: 30m³ / Ø 2.20m / single compartment * Vogelsang rotary lobe pump with soft start * Max. delivery rate: 6,000 L/min * 6" swinging outlet at rear * 8" pipework to the pump with gate valve * 8" * Free-fall to swinging arm in 8" with 8" gate valve * 8" docking funnel on top, lockable with air-operated gate valve * Filling and ventilation with air-operated lock incl. safeguarding for all pneumatic valves * 1" ball valve on the right at the pump * 4" flushing line with two 2.5" nozzles (1x front, 1x center of the tank, with pneumatic valve) * Automatic pump shutoff * Pneumatic control panel, rear left * 1x foldable dome cover * 5 m hose holders left and right (galvanised steel) * Liquid level indicator front left * Operating temperature: 0-60°C * Side access ladder left * Unladen support legs * Single mudguards * Sight glasses at rear (1x top, 1x bottom) * Fifth wheel height: 1.180 m * 24 Volt lighting system * 2x LED work lights at rear * 2x LED work lights left and right * 1st hand (one owner) For sale, for rent, or lease with purchase option upon agreement! German vehicle! German documents! Disclaimer for possible errors in the listing: Despite careful creation of this listing, errors may have occurred in the text or specifications. We accept no liability for mistakes, changes, or prior sale. All information provided without guarantee. Please contact us to verify details or clarify further questions.