Used Heavy Drill Machine for sale (68,084)

Condition: ready for operation (used), Column drill / ALZMETALL AB 3 ES - Well-maintained, original condition - Drilling capacity / steel max. 35mm - Arm reach approx. 280mm - Table size approx. 600x470mm - Drilling stroke approx. 180mm - Taper shank MK 3 - Stepless speed control - Speed range approx. 65 - 2000 RPM - Drilling depth stop - Spindle guard - Emergency stop - Foot switch - Analog speed display - Drill chuck - Documentation Dimensions: Gksdpfx Afoztffcs Aea L x W x H 1.2 x 0.8 x 2 meters / Weight approx. 500kg

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine Gkodpfeztdz Asx Af Asa - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Gkedpfxsvmtlhs Af Asa Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired

Condition: ready for operation (used), GILLARDON GR 30/4 – Radial drilling machine -Drilling capacity in steel: Ø 30 mm -Spindle taper: MK 3 -Drilling stroke: 120 mm -Spindle speed: 45–1,850 rpm -Continuously variable speed control -Drilling depth stop -Analog speed display -Drive power per drilling head: 2.2 kW -Operating voltage: 380 V / 50 Hz -Overhang: 295 mm -Max. distance spindle – table: 550 mm -Table size: approx. 2,000 × 660 mm -Coolant system -Documentation Dimensions: L x W x H 2.0 x 0.7 x 2.0 meters / Weight 2000 kg Gjdezr U H Hepfx Af Ajka Errors and omissions excepted

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm feed ja m/min Gksdpfx Afjzmixmo Aea weight of the machine ca. 1,1 t

Condition: good (used), Year of construction: 1972, Drilling capacity in steel 70 mm Drilling capacity in cast iron 80 mm Gkodpfxet Uzk Ro Af Asa Spindle holder MK 5 Spindle projection 400 mm Spindle stroke 240 mm Column diameter 250 mm Speed range, infinitely variable 45 - 1325 rpm 5 feeds 0.1, 0.14, 0.2, 0.28, 0.4 mm/rev Table size 880 x 660 mm Motor power 3 kW Dimensions L x W x H 880 x 1200 x 2500 mm Machine weight 1400 kg Accessories / Special features: - Infinitely variable speed adjustment via PIV gearbox and reduction gear - Large clamping table 880 x 660 mm - Feed via cross lever - Large drilling depth adjustment with 240 mm fixed stop - Swivel table - Emergency stop switch - Coolant system Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1995, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 Kurzspindel MK table: 420 x 350 mm turning speeds 160 - 2250 U/min column diameter 115 mm throat 293 mm distance spindle /table min 117 / max 701 mm T-slots 2 x 14 x 224 total power requirement 1.45 / 1.90 kW weight 370 kg dimensions of the machine ca. 1200 x 800 x 1840 mm Current list price ~ 12.500 euros Special price available upon request Features: - Sturdy column drill press (V-belt) Godozl E Uuopfx Af Aeka - stepless speed adjustment - pole-changing drive motor - height-adjustable worktable * with 2 T-slots - R/L rotation of the drill spindle (reversing switch) - Main switch with motor protection switch - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Operating instructions (PDF)

Condition: good (used), Year of construction: 1995, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65.0 - 1.750 U/min table-size 615 x 420 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 mm/U spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Automatic spindle feed * with electromagnetic engagement - Pole-changing motor - Right/left rotation of the drill spindle - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank Gedpfx Afjzl E Uhs Aska - Emergency stop button on the front - User manual (PDF)

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment Gedpfx Aezl E Ubsf Aoka - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor Gkodpfx Afszl E T Re Asa - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: good (used), Year of construction: 1979, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 110 - 1450 U/min table-size Ø 455 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 m/min spindle taper MT 4 MK Gedjzl E Tkopfx Af Ajka engine output 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Features: - Heavy-duty column drill press (V-belt drive) - Automatic spindle feed - Infinitely variable speed control - Fixed depth stop - Round machine table with T-slots * Height-adjustable via hand crank * Rotatable - Emergency stop button on the front - Coolant system with separate reservoir - Operatorâ??s manual

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: Gjdpswh Rp Esfx Af Ajka - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: good (used), WMW BR 40/2 x 1250 radial drilling machine Drilling capacity in steel (diameter): 60 mm Arm reach: 1250 mm Max. workpiece height: 820 mm Spindle speed: 20-1200 rpm Spindle taper: MK 5 Spindle stroke: 400 mm Feed rate: 0.063-0.63 m/min Vertical arm adjustment: 950 mm Electrical connection: 380 / 50 V / Hz Clamping surface of base plate: 1400x800 mm Total power requirement: 5 kW Machine weight approx.: 3 t Gkjdpfx Afsx U Ecto Aea Floor space required approx.: 2.2 x 1.0 x 2.8 m

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Gkjdpoulz Iwjfx Af Aea

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Gedpfxjy Tt Rpj Af Aska Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: good (used), Citoborma paper drilling machine, 4 spindles, height-adjustable table, in good condition, immediately available. If you are interested, we will be happy to provide you with information about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Gedpfx Aexbzfnjf Ajka

Condition: good (used), Year of construction: 1989, bore capacity in steel (diameter) 30 mm throat 300 mm bore stroke 150 mm cross-moving table 600 x 180 total power requirement 1,5 kW weight of the machine ca. 1,1 t Gkodpfx Afezmix He Asa dimensions of the machine ca. 1,0 x 1,0 x 2,2 m

Condition: used, Year of construction: 2006, number of heads 4 serial no. 103245 Gkjdozr Rpwjpfx Af Asa voltage 380 V

Condition: repair required (used), Year of construction: 2001, machine/vehicle number: 794, functionality: limited functionality, Boring and sawing machine. Gedpfxjzrl Eaj Af Aska From 2001 to 2011: operated in a three-shift system From 2011 onwards: operated in a two-shift system Sawing machine: fully functional Boring machine: functional on 2 out of 3 axes Machine is currently running.

Condition: excellent (used), functionality: fully functional, A very well-maintained radial drilling machine, manufactured by TAGO, type M 100, with a swiveling square table. Gkjdpfx Afszrzlco Asa Outreach: 1000 mm.

Condition: used, Year of construction: 1999, machine/vehicle number: M5164, Type Sigma Eccon from Italy X1250 Y650 Z685 Gksdpfx Ashbzmhsf Aea Rapid traverse XY 24m, Z 15m / min Spindle 12000 rpm 21 tools magazine HR410 handwheel Heidenhain TNC426 Weight 7500kg

Condition: used, Year of construction: 1999, Machine number: 9114108 Weight (approx.): 150 kg Gedpozd Hntefx Af Aska Motor power: 0.71 / 1.26 kW Overhang – stand to drilling center: 600 mm Max. material height: 200 mm Table width: 1000 mm Number of drilling spindles: 4 Drill chuck: Screw-in thread Drilling depth limitation: Yes Drilling stroke: 70 mm Speeds: 1400 / 2800 rpm Workpiece clamp: Yes Drilling feed: Hand lever Working height or feed table height: 890 mm, with lighting Storage location: Nattheim

Condition: new, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 210 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, total height: 1,120 mm, total length: 710 mm, total width: 890 mm, type of input current: DC, overall weight: 240 kg, table length: 840 mm, table width: 210 mm, power: 1.5 kW (2.04 HP), distance table to spindle center: 360 mm, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed, stepless 50 - 3000 rpm Spindle travel ----- 70 mm Spindle mount ----- ISO 30 Work table ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3x14 mm Overhang ----- 240 mm Distance spindle - table ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill chuck incl. drill shank * Digital depth stop * Digital spindle display * Fine adjustment * Left / Right switch * Milling head, left / right, rotatable 90 degrees * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed Gsdpfxjga T Ago Af Aeka * Milling vice * ISO30 collet chuck & 12 collets in case * Milling set

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68113, Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity, enlarging holes approx. 80 mm - Thread cutting up to approx. M 40 - Drill spindle mount MK 5 - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Work area on base plate approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm Gkjdpszii Sfofx Af Aea - 9 feed rates 0.09 - 0.75 m/rev - Drill spindle drive 400 V / 10 kW - E - central clamping system - Coolant system - Space required approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg

Condition: new, Holzprofi Maker Special Column Drill M1-BM4117S-Variotouch with Stepless Speed Gkodpsx H Ukksfx Af Aja The brushless motor is directly controlled without a belt drive! It features an electronic control system with a combined chip and software control system. It features a touchscreen display, thread cutting device, automatic start and stop function when the spindle is operated, forward/reverse rotation, LED light, and cross-line laser. With extra robust table - also suitable for vices. Technical data: Motor power 1.6 kW (= 2 kW S6) Motor voltage 230 volts Quill taper MT 3 Quill stroke 120 mm Drill chuck 3-16 mm Speeds 150-3200 rpm Column diameter 80 mm Table dimensions 345 x 345 mm Base dimensions 520 x 320 mm Table tilt 90° left/right